Regarding URL Address Display

Hi,
When we deploy webdynpro applications in browsers, we get the totel url address in the address bar .But when we deploy it inside portal we get url address only as
http://xxxxxxx/irj/portal  .
Why the detail url address is not displayed ?
Thanks a lot .

Hi,
The Web Dynpro applicatiolns run inside an iframe, that's why you don't see the detailed url.
If you right click somewhre on the application, you'll see the detailed url.
Regards,
Omri

Similar Messages

  • Is it possible to alter the URL address displayed in my browser?

    Hello Everyone
    I work in Special FX for a TV show largely in computer graphics.  I specialize in Maya, Photoshop, Illustratro and AutoCad.  However I have a little Dreamweaver experience and got roped into a new project.
    Here is the effect I need.
    Someone surfing the web.
    I've built a website, uploaded it and it works great.  The only problem is our legal department won't let the URL display my website.  I have to display one that is not a registered domain.
    Is there any way to display an alternate URL in the address bar?  A fake one, so to speak?
    This website will be displayed on a iPad tablet running safari.
    Thanks in advance.
    -D

    >I have to display one that is not a registered domain.
    >Is there any way to display an alternate URL in
    >the address bar?  A fake one, so to speak?
    No. You can't fool a browser into displaying a url that does not exist in the address bar. It must reference a page on a registered domain - or an ip address -  but not a fake url. You could have a frame hosted at on one domain reference a page from another domain - but the source url is still not hidden. What exactly are you trying to do here?

  • Firefox 24 Android what is the about:config setting to display the full URL address again?

    Firefox 24 Android what is the about:config setting to display the full URL address again?
    Example this:
    http://www.thewindowsclub.com/eulalyzer-review-download
    instead of just this:
    EULAlyzer: Free EULA analyzer software for Windows
    In the address bar?

    hello postewar, set ''browser.chrome.titlebarMode'' to 1.

  • HTTPS communication using HTTP receiver adapter URL address as Address Type

    Hi All,
    If some one who has tried HTTPS communication using HTTP receiver adapter using URL address as Address type can you please guide me what are the steps need to be done.
    Note : Address type is a parameter in HTTP adapter setup .
    Regards,
    Reddy

    Hi,
    Check this,
    Configurations in Integration Directory
    The plain HTTP adapter gives the receiver system the following specifications:
    — Specifications for addressing using a URL address:
    Target host, service number, and path prefix including query string:
    http://<hostname:port>/<path>?<query-string>
    You can identify the target host (HTTP port) of a SAP Web Application Server using
    the
    ICM monitor
    Host and port of the HTTP proxy (optional if there is a firewall between the plain
    HTTP adapter and the receiver system)
    Authentication data for the receiver system.
    See also: transaction Display and Maintain RFC Destinations (SM59).
    &#151; Specifications for addressing using an HTTP destination:
    HTTP destination
    &#151; Parameters from the communication channel for technical routing
    Content type (the entry text/XML is expected as default)
    Specifies the format that the message contents (the payload) should have.
    Optional header fields for the receiver-specific protocol
    Attributes for the query string
    1. Sender party
    2. Sender service
    3. Receiver Interface
    4. Message ID
    5. Quality of service
    6. Queue ID
    All attributes are selected except for the queue ID. If you do not want a value to be
    transferred to the receiver, deselect it. The queue ID is only required if the quality of
    service is EOIO.
    Specifications for payload manipulation
    XML code (default UFT-8)
    Specifies the character set.
    URL escaping
    Presents the XML in a URL-enabled format. Special characters that could be
    interpreted as control characters are replaced with escape characters (masked).
    Prolog
    Enhances the payload for particular servers (optional, see below).
    Epilog
    Enhances the payload for particular servers (optional, see below).
    Enhancing the Payload
    Regards
    Seshagiri

  • Proxy receiver channel with HTTP destination or URL address?

    Hi Experts,
         I have a scenario as below:
         (Webservice Client)SOAP --> PI --> PROXY(SAP ECC).
         A webservice client calls PI using SOAP. PI then sends the request to SAP ECC using PROXY.
        I am using AAE. Therefore I have ICO.
        In the receiver PROXY channel I have given:
       ADAPTER TYPE: SOAP
       Transport Protocol: HTTP
       Message Protocol: XI3.0.
       Under connection parameters:
       Addressing Type dropdown as 2 entries HTTP destination and URL address.
       In what cases i should use HTTP destination and URL address respectively?
       Which option is preferred?
       Do they work same or differently? How?   
       When I select HTTP destination where should I create the corresponding RFC destination? In PI ABAP stack using SM59 or PI NWA?
       If this HTTP destination is created in PI ABAP stack using SM59 then what type it should be? H? or G? 
    Thanks
    Gopal

    Hi Gopal,
    In creating XI receiver communication channel, you have 2 options for Addressing Type:
    1. URL Address - no need to create RFC destination. You just have to specify the XI receiver host name, HTTP port, path (/sap/xi/engine?type=receiver), Authentication data (logon details for SAP Client number of the PI system).
    2. HTTP Destination - create RFC destination in SXMB_ADM and specify the RFC destination name in your receiver communication channel.
    For SAP documentation, see this link:
    http://help.sap.com/saphelp_nwpi711/helpdata/en/f4/0a1640a991c742e10000000a1550b0/content.htm?frameset=/en/e1/091640a991c742e10000000a1550b0/frameset.htm&current_toc=/en/43/96cbccb9335b77e10000000a11466f/plain.htm&node_id=5
    Regards,
    Naveen.

  • Why is most of the URL address, except for the domain name, in gray font? It's difficult to read. I would like to make the entire address font in black

    [http://pics.livejournal.com/tersa/pic/006gzfsf Screenshot of the behavior]
    Before I upgraded to Firefox 6.0, the URL address was displayed in black text.
    After upgrading, it is now displaying only the core domain name (e.g, mozilla.com) in black text, while any extra text (like, https://support. ) is grayed out.
    It is very difficult to read this gray text on my monitor. I'd like to make it so that the entire address is displayed in black text, but I couldn't seem to find any kind of configuration setting under Options to change this.
    Please let me know if I can modify the URL display to be all black again.

    That is a new feature in Firefox to highlight the domain in the URL bar. You can change a preference to make the entire URL dark.
    Change a preference:
    #type '''''about:config''''' in the Location/URL bar and press Enter.
    #if you see a warning, accept (promise to be careful)
    #Filter: '''''browser.urlbar.formatting.enabled'''''
    #in lower panel, double-click that item to toggle value to '''''false'''''
    I am not sure whether or not you need to re-start Firefox after doing the above for the change to take effect. Test and if it does not work, then re-start Firefox and test again.
    '''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
    Not related to your question, but...
    You need to update some plug-ins:
    *Plug-in check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
    *Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.com/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
    *Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.com/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]

  • URL's displayed in email messages

    Is there a setting to hide url addresses in email messages so they aren't displayed as the long html version? It is very cumbersome to read emails with links in them when the url for the link is displayed.
    Thanks

    Hey pjd22,
    You may want to try and enable HTML email as shown here http://bbry.lv/9sQbKt, it may make reading the emails a bit easier as there is no setting to remove URL's from emails. 
    -SR
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • How do I eliminate the http identity information on the url address line"

    When you click on the down arrow on the HTTP line where the last URL address you keyed in is displayed - it will show the history of the last URL addresses you keyed in and visited. It will also display a second line known as "identity information". How do I get rid of this useless piece of information that forces a second useless line to be displayed?? I just want the URL addresses I had keyed in before to be displayed (one per line). Like all previous versions of Firefox and IE.
    How do I do it????

    Old Location Bar: https://addons.mozilla.org/firefox/addon/7637

  • Personal domain on MobileMe, repetitive URL addresses and personal site?

    Okay, this may be two topics, but I don't know how to describe it briefly enough for the subject line to get it all across. At least not at the end of a long day.
    I have a website I designed and published via iWeb '09 promoting my home motorcycle service. I have the domain name registered through GoDaddy.com. I followed the instructions posted in another thread linked to GoDaddy's MobileMe instructions, and also used MobileMe's personal domain instructions to the point where it appears to work, but I still feel like I'm doing something wrong. The domain name is below.
    www.bltmoto.com
    However, when you type this into a browser, it forwards to my PERSONAL site which is also in the same iWeb file, which is basically just a blog and some pictures. It takes you to:
    http://www.bltmoto.com/crat/HQ.html
    ...when I'm trying to get it to bring up this content:
    http://www.bltmoto.com/BLTMotoService/Home.html
    I was under the assumption that my personal site would remain located within the web.me.com domain, but it appears not if it's part of the same iWeb file. Is this correct? So hypothetically, if I was to get a domain name for my personal site, like www.chrisratledge.com, or whatever, could I get it to work independently of my moto service site within the same iWeb file? Would I have to duplicate the file and delete one of the other ones to keep them separate, or would that not work either? In other words, in iWeb, when you choose "New Site," will it always be like a subdomain (don't know if I'm using that nomenclature correctly) on your account?
    Also, is there a way to truncate my URLs for these sites? Like when I type in www.bltmoto.com, it would exist and displays in the URL field of the browser as:
    http://www.bltmoto.com/Home.html
    instead of:
    http://www.bltmoto.com/BLTMotoService/Home.html
    Also, the page names in iWeb I designate also appear directly as typed in the URL address line and at the top of the browser title bar. Is there a way in iWeb to change this? I'd like the Title bar to display the company name and page info, such as:
    "BLT Moto Service Home"
    instead of just
    "Home"
    Is there a way to change or modify this within iWeb, or is this strictly a HTML code modification?
    I know this is a lot and hopefully I've been clear enough in my description, please help if you can. Thank you

    Ethmoid wrote:
    ...the site that you have published first will be connected to your domain name....If the first site is published first, then this will be the first linked to your domain name and will come up.
    Okay, I figured that may be the case for that issue, shortly after I asked the question, just didn't mess with the order to verify it.
    Basically, iWeb site structure is to produce a url that is http://www.domain.com/sitename/pagename. The only way that you can change this if you are publishing to MME is to change the way in which you forward your domain name - change CNAME to ordinary web forwarding and then your url will be http://www.domain.com for every single page of your site. The only draw back to this is that individual pages of your site cannot be bookmarked, just the whole site.
    Hmm, so I think I see what you're saying about the page structure, so no matter what I do while publishing and hosting on MME, the only way to have my domain name stay "www.bltmoto.com" is to change the CNAME setting on GoDaddy to "ordinary web forwarding" - I have no idea what that is or how to do it - but then every single site and page I publish will only have the "www.bltmoto.com" URL?
    Your only other option is to purchase a hosting account from GoDaddy and upload your site directly - if you do this you can upload just the contents of your site folder rather than the whole folder itself and this will then give you the domain name www.domain.com/pagename. RSS feed will not work though, as you have broken iWeb's site structure and I see that you do use this so it might not be a viable option for you.
    So is there no way to create separate websites with separate domains using iWeb, and publish them to other MME accounts or keep them separate? My dad wants me to put together a site for him that he would publish and host on his MME account. Does this mean I'd have to create it on his machine, or could I create a new iWeb file for his site and publish it to his account from my computer? Suddenly the convenience appeal of the marketed ability to host personal domain names on MME doesn't seem convenient at all.
    I think maybe you addressed this on my other questions in another thread...

  • How to to display the JSP report in Application Server ? URL for displaying

    Hi Experts,
    Last week, we tried to change the memory of Response Cache and buffer Cache to increase the speed of the Excel report. But it didn’t work out.
    And from the below link, I understood we can convert the oracle 9i report to excel by converting the Oracle 9i report to JSP report.
    http://www.oracle.com/technology/products/reports/htdocs/getstart/demonstrations/index.html
    I’ve converted the Oracle 9i report to JSP report and finding the way to display the JSP report using Application Server. I am trying to find out the REPORT URL of simple JSP report and using Reports Servlet . Right now I am trying to display the JSP report in Application Server.
    Please suggest the URL for displaying the JSP report
    Thanks & Regards

    Hi,
    You can directly call you .jsp file, http://<host>:<domain>:<port>/<jsp report path>?userid=<if your report requires userid>/<pwd>
    Refer to metalink documents:
    Frequently Asked Questions About JSP Reports [ID 301714.1]
    Here --> Question 4. How do I execute a JSP report?
    Also refer, How to deploy JSP reports [ID 220943.1]
    Hope this helps.
    Regards,
    Mithun

  • How to open a URL address within a PDF document?

    I'm using Adobe Reader X, v 10.1.3
    When coming across a URL address, my curser turns into a "hand" when clicking it, but it won't take me to the website, even though I have an open browser (chrome) in the background. The Help Files have been of no help. Can anyone help me? I tried preferences, looking under the Internet option, but nothing seems to address this need.
    Many thanks!
    susan

    Hi there - I could click the URL in your note above and I wound up on the Adobe website. (When hitting the windows key and the letter R key together, if that's what you meant, nothing happened. When going via Start button, RUN, the http entry resulted in chrome openining a new Adobe window/tab as expected. I've not had any trouble getting any hyperliks to open, until I tried one in a PDF document using Adobe Reader X earlier today. I tired reinstalling Adobe X, updated from the 10.1.3 version, but the new version never seemed to install. However, going back to the original program, same PDF doc, when clicking on the hyperlink, lo and behold, this time, a window opened up asking me if I trusted the site, to which I checked off "yes", then clicked Allow, and it took me to the appropriate website. I haven't a clue why this failed to work before, and no window appeared like the one I just tried.
    So thanks for your help, but it appears that it's fixed itself.
    Best regards,
    Susan

  • Where is URL stored in CRM tables How to retreive URL address from table

    Hi,
    Can any one tell where URL address is stored in CRM.
    And how to retreive URL Address from CRM tables.
    As i'm not able to find exactly how to retrive the url form the tables. as the URL address is not visible.
    Thanks & Regards,
    Rajender.
    Edited by: Rajender k on Aug 12, 2008 6:37 PM

    I am not able to get you. Please rephrase or elaborate.

  • How to find the URL address of portal page ?

    Hello All,
    How to access a page from Portal Content Directory without logging into Portals ?
    Can we know the URL address for a Portal page so tht it can be called from another page via href object.
    Pls, provide me with an alternate solution that works better.
    Thank you for your time and valuable inputs. Looking forward to your responses.
    Regards,
    Anil Kumar.

    Hi,
    It is quite simple to find out the URL of a page, Check this for more:
    /thread/426798 [original link is broken]
    http://help.sap.com/saphelp_nw70/helpdata/en/43/014421d21d6fade10000000a11466f/frameset.htm
    Greetings,
    Praveen Gudapati

  • Writing data into file from URL address

    Hi!
    I need to download file from certain url address and write it to file on my local disk. The file being downloaded is a image file and therefore
    I cannot make sure what encoding should I use. When I save file manually on disk and compare it with the file written programmatically, then
    the bytes in both files are not equal. Any smart advises are welcome.
    The code being used is:
    import java.net.*;
    import java.io.*;
    public class UrlParser {
         public static void main(String[] args) {
              String data;
              try{
                   // Construct a URL object
                   URL url = new URL("http://stockcharts.com/c-sc/sc?s=qqqq&p=D&b=3&g=0&i=t74934638175&r=4028");
                   // Open a connection to the URL object
                   String encoding = "UTF8";
                   BufferedReader html = new BufferedReader(new InputStreamReader(url.openStream(),encoding));      
                   Writer img_out = new OutputStreamWriter(new FileOutputStream("sc.gif"), encoding);
                   while((data = html.readLine()) != null) {
                        img_out.write( data );
                   img_out.close();
              } catch(MalformedURLException e) {
                   System.out.println(e);
              } catch(IOException e) {
                   System.out.println(e);
    }

    Use InputStream and OutputStream classes, not Readers/Writers. The latter are for "text" I/O, not "binary".

  • When I open a second Firefox browser window, the URL address window, instead of showing the URL, says "Go to a Web Site;" also, and more importantly, the "back" button is greyed out. This is a new problem, and the first Firefox window I open works fine.

    After I open the first Firefox browser window, any additional window I open does not open my homepage, but opens a blank page with "New Tab" showing on the tab. An orange "Firefox" tab with a drop down arrow shows at the upper left hand corner of the screen. All of the options (File, Edit, etc.) are greyed out, however they will work if you move your cursor over them.
    The URL address window says "Go to a Web Site". After I've gone to a website, the back button remains greyed out and I am not able to go back to a previous page. My RoboForm and Netcraft toolbars only show up in an abbreviate form. The add-on bar doesn't show up at all.
    Again, this is a recent problem, and only happens after I've opened one browser window (which works fine) and then open additional browser windows (as few as one additional).

    I had this same problem. Seems to be caused by the web developer tool bar FF extension (this started happening after a recent update to that extension). After disabling it, my FF is back to normal :)

Maybe you are looking for