Regarding usage decision

Dear pp friends,
I had done usage decision for wrong date
now i want to reverse it
it is possible to do that
thanks in advance
Regards
Umesh

Dear,
Please check SAP note note 33924 Reversing the UD and 175842-QM lot stock reversal.
Also refer this link,
[Reverse Usage Decision|UD cancellation or reverse after GR]
Regards,
R.Brahmankar

Similar Messages

Regarding problem with updating usage decision in QA11

Hi Experts,
I am trying to use the Bapi "BAPI_INSPLOT_SETUSAGEDECISION" to update the usage decision in QA11 in a proxy. I am not being able to understand what parameters to be used and how.
CALL FUNCTION 'BAPI_INSPLOT_SETUSAGEDECISION'
EXPORTING
    NUMBER               = INPUT-SAP_USAGEDECISION-DETAILS-UD_INSPLOT "inspection lot no from the proxy structure.
    UD_DATA              = lw_data
LANGUAGE             =
IMPORTING
UD_RETURN_DATA       =
STOCK_DATA           =
   RETURN               = li_return
TABLES
SYSTEM_STATUS        =
USER_STATUS          =
Please help.

Hi,
Just pass the inspection lot number to the field NUMBER and try, because there are no standard programs in which this FM is called apart from a Business Object BUS2045, it is called in the method InspectionLot.StatInterface.
You can check that for any clarification, but it is not clear there as well.
Thanks,
Mahesh.

Usage decision button - regarding

Hi,
In QF01, there is an Usage decision button in the top.
But i tried to go through QA32 to QF01, the usage button is not appearing.
The client telling in one user it is appearing when they go through QA32 .
What i should do to make it appear ?
Thanks

I'm not sure you can. I looked at it briefly and see the same button your users reported. So i beleive it is because in QA32 you have a UD button available on the main screen of QA32 so the programmers figured why would you need it when you went in to record defects. I am surprised they even made that change however and i don't know know why the screens aren't the same. The must be calling a specific screen from QA32 when they call the program.
I don't think you'll find SAP to consider this a bug.
FF

QM_Follow up action in usage decision

Dear QM Experts,
1. We can record the defects in inspection lot (01 origin) which creates quality notification in background under F2 type.
2. If the defects are recorded usage decision is given as Rejected.
Requirement is auto email should be sent to predefined email addresses briefing defects and number of defects. This has to be done only for those lots whose UD have been given as Rejected. Question is which follow up action and which function module to be used for this?
Best Regards,
Anand Rao

hi
kindly check whether the following FM can be used
QFOA_MAIL_REJECTED_RESULTS-Follow-Up Action Module: Send Mail for Rejected Characteristics
QFOA_MAIL_SENDING-Send Info MAIL After Usage Decision (Mail Contains UD Data)
QFOA_MAIL_SENDING_STANDARD-Send a Short Info MAIL After Usage Decision
you have to assign these follow up actions with FM to the rejected UD code
regards
thyagarajan

Usage decision follow up action change of status in equipment

Hello every one, I am having calibration scenerio in my project. All process is running properly but the issue which i am having is that when i am giving usage decision i should get a pop up to change the status of the equipment which is not coming in my case. i have checked followup action whch PM_QM there i have activated 2 Funtion modules one is for automatic TECO of order which is working properly and second is change to status in equipment master which is not working for me. Kindly give some guidance to me on same.
Regards
Abhishek

Helloo,
Please let me know the equipment type you are using.
If you are using equipment type other than Q then u may get such type of issues.
Please try out with equipmetn type Q or P
Thanks

Automatic TO Creation for QM Usage Decision

Dear Gurus
We all know WM TO to releasing stock from QI to UU or return goods to vendor can be created automatically,
My question is, when the usage decision is split into two, some material going into stock, and some returned to vendor. for return to vendor, SAP will do automatic transfer, but for material go into stock, SAP is not release Q status in WMS to unrestricted (blank), I have set the movement 321 to create TO automatically and post into same bin.
FYI, if the transaction is separated, SAP perform well (transfer Q to unrestricted done automatically and return to vendor also done automatically)
Is there any solution for this problem?
Thanks and Regards
CJ Lee

Hi,
In case of a usage decision for a partial quantity, it is not possible to create the TO for the generated posting change notice automatically. This is only possible when the full quantity is released. The same happens if you release a partial quantity and post the rest using a different stock posting. The reason is, there needs to be a user decision, which part of the quantity has to be posted, this is necessary for example when the quantity is distributed in the warehouse over many storage bins. But even if the full quantity is on one storage bin, there is no automatic TO creation. You can see this also in the online processing LT05), in case of partial quantities you have to enter the selected quantity in the quant list, for a full posting this is not necessary.
Hope this helps.
Regards,
Sinéad Curran

Issue while doing material posting through Usage Decision

Hi all,
I have an issue while doing material posting through Usage Decision. Please find below the details.
Inspection Lot 10000604689
Material        1730PCPBS.0031
Batch           QP611097      GQ02
Out of total qty of 2100 we need to post the following
To unrestricted use                     2,098
To sample usage                         2
Following error appears,
Deficit of SL Stck.in qual.insp 1,638 NO : 1730PCPBS.0031 62GQ GQ02 QP611097
Message no. M7021
Diagnosis
Shortfall below the specified stock level or quantity amounting to 1,638 NO.
System Response
If the message is an error message (E), the above is not allowed.
If the message is a warning message (W), the system will allow your input, but the warning is intended to prevent you entering a wrong quantity.
Procedure
In the case of a warning message, check the quantity entered.
In the case of an error message, change the quantity or terminate processing.
I have checked that quantity 2100 of material 1730PCPBS.0031 is in QI stock. Kindly advice what is the issue and why we are getting the error?
Regards,
Brijesh

Hi Brijesh,
What is the status of inspection lot?
One of the possibilities I think could be inconsistencies between MM and QM.
Have a look on SAP note 48815- Checking possible inconsistencies between MM and QM.
Regards,
Anand Rao

Error message during the usage decision

Dear Gurus,
While performing the usage decision in txn code QA11, i entered the relavant quantities in unrestricted-use.
Then when i tried to assign the UD code i am getting the following error message.
"You have no authorization for this catalog entry Message no. QS291"
But QA11 authorization is already there, apart from that which authorization is required.
Please give your inputs
Thanks and Regards
Hari

Hi,
As the error message says Authorisation for Calatalg 3 and the related code group is missing.
When u get this message just run /nsu53 on your screen so you know which objects are missing. Maintain those vlaues or ask Basis to mainatin these values.
Regards,
Nitin

Automatic Batch creation at the time of usage decision in qa32

hi all,
while doing usage decision in transaction qa32, user has to enter batch. can this batch assignment be done automatically at any stage of quality inspection? any ideas?
Best Regards,
AI.

Hi,
When the Material is subjected to Quality management & batch management is active for that material.
Then during Goods receipt you can use automatic batch for that material so the material will be in Quality inspection with batch update
when you do the GR in 101
Whenever you do the usage decision then the same batch will flow.
rgds
Chidanand

AFS-QM Error in stock posting performed by taking Usage decision

Hi all,
during stock posting with 105 mov type performed by taking Usage Decision (QA11), I faced with a strange system behavior, described beneath.
Previuos steps:
Purchase order creation
Partial Good receipt performed by MIGO, mov type 103 (Blocked stock from PO)
Automatic Creation of Inspection Lot
Error encountered:
If I take usage decision (QA11) for the inspection lot created, putting the stock checked in Unrestricted Use (correspondant mov type = 105), in the following good receipt (related to the same purchase order), the incoming stock available is less of the real quantity, previously accepted..
After some checks we understood that with 105 mov type the system doubles the real quantity previoulsy accepted, acting in the following manner:
Initial PO: 100 PZ
1° Good receipt: 30 PZ
(automatic creation of inspection lot)
If we take a usage decision, posting stock to unrestricted use (mov type 105), in the 2° Good receipt, the quantity available from the same PO is not 70 PZ (100 - 30), but only 40 PZ ! ! (100 - (30 * 2)) = 40
Please note that it does not occur if we post stock (always 105 mov type) with a MIGO transaction, so we are forced to think that the problem is strictly related to AFS-QM inventory posting, and not to 105 mov type or inbounding process.
Thanks for your collaboration,
Regards,
Ale

I'm not familiar with the specific apparel and footwear solution but with regards to QM, if you are using the standard SAP delivered stock postings, it should use 105 to accept the material to unrestricted for the GR blocked.
I would first use MB51 for the material and batch and review all the material movement documents. Look at the trail of movements and try to see where the changes happen.
In your example, what did the unrestricted inventory and GR blocked inventory show as stock levels?
I'd also check OSS for issues related to AFS/QM. This is not new functionality in SAP so I would be surprised if this was an actual bug or problem in the system that hasn't been seen before.
FF

QM - Usage decision report

Hello QM masters,
Is there a standard report to search the history of all usage decisions that have been taken on certain material or batch?
Best regards,
Tiago Magalhães

Hi Tiago,
In addition to The above ..
1. You can select the each inspection lot for the material and click on Extras --> UD Information... for Initial and final UD Details
2. Click on Extras --> Change History... to get complete details of all changes for that perticular Inspection Lot.
Thanks

Return process for the PO which has done the usage decision with QM

Hi Guru,
We are running below process right now, and stop there, don't know how to return to vendor:
PO for external vendor -> Goods purchased physically arrive -> Create a inbound delivery for this PO -> Post the GR with the inbound delivery created -> QA team performed the usage decision and rejected.
At this moment, how can we reverse the good receipt? We canu2019t use VL09 to reverse the inbound delivery, and we can not use MBST to reverse the material doucment which created during Post good receipt.
What's the correct process to return it to vendor?
Thanks,

Hi Rick,
Can use t.code MIGO and select return delivery for material document or delivery note.
Then select the respective document, it will display the details, now you can select the material which you want return and unselect the materials which you dont want to return and the quantities accordingly.
Save the document.
This will use movement type 122.
Regards
vk

Partial quality inspection & partial usage decision?

Hello Friends
Inspection lot is created when GR is done against purchase order, in normal case result is recorded for whole lot and usage decision is made partially / fully.
Say business want to inspect (record result) only 50 pieces and want to do usage decision of 50 pieces immediately and again want to inspect (record result) another 50 pieces of same lot and want to do the usage decision u2026u2026u2026u2026how to do it?
As per my knowledge once inspection is done & usage decision is done system stops to inspect that lot again.
Looking for your valuable input as soon as possible.
Thanks & Regards
Swanad

hi
inspect (record result) only 50 pieces and want to do usage decision of 50 pieces immediately and again want to inspect (record result) another 50 pieces of same lot and want to do the usage decision
For result recording to be done for qunatity In control indicator of each char tick on long term Inspection.
This will allow you to do RR after UD has taken.
For UD to be done Partially means stock posting partially ...
You can create a UD code(AP) & in customization do not post it automatically.
Then You can only post 50 Qty initially with UD -AP
then for rest of the qty in QA32 select those lots with UD & stock post rest of the items when you carry out RR for rest of 50 .
This is the solution
Regards
Sujit

Reg payment as per usage decision

Dear all,
please give advice regarding the 3 scenarios
scenario 1.: Sent material for subcontracter for making 10 materials , stock received 10 numbers out of which in usage decision we have put 8 in unrestricted and 2 in block, during invoice in MIRO we should get payment for 8 numbers only.
Scenario 2 : Sent material for subcontracter for making 10 materials , stock received 10 numbers out of which in usage decision we have put 8 numbers in unrestricted and 2 in scrap, in MIRO we should get value where we deduct for 2 numbers and also the raw material cost for 2 nos.

Hi
Use User Exit :LMR1M001
Refer links:
Re: miro for unrestricted use qty only
This is only one solution
Regards
Sujit

Quality inspection stock showing in urestricted stock without usage decision

Dear Gurus,
We have came across a serious issue in Quality department as follows.
The skip stock status "REL SKIP SPRQ CROK QLCH" is showing in unrestricted use stock even before the usage decision is made. Now when we are trying to reject the skip material, in MMBE there is no stock against Quality inspection. & the stock when rejected is getting deducted from unrestricted stock.
Request you please guide me so as to transfer the "REL SKIP SPRQ CROK QLCH" stock yo quality ispection once 105 is done.
Kindly guide what configuration settings need to be changed.
Regards,
Mahesh

Thanks Saravan.
As I am new to QM kindly clarify following things to me.
1. Even if we reject the skip stock by making the usage decision, it won't be deducted from unrestricted.
2. Skip/DOL lot will never be shown under Quality inspection in MMBE.
3. The only rejection of SKIP/DOL that will happen is the line rejection.
4. Once the line rejection happens materila status will be removed as DOL & converted to normal for next 5 lots.
Correct me if I am wrong.
Thanks & Regards,
Mahesh

Regarding usage decision

Similar Messages

Maybe you are looking for