Regarding user assignment

Hi Folks,
Initially we assigned the user to the purchase organization and purchase orders created by him after GO live.Later business raised an issue  and saying that Assign me tab is not working for that particular user in Sourcing cockpit.As we analysed the Assign me and action tab in the sourcing cockpit is highlighted when  the user is assigned to the purchase group only in org structure.
Hence we thought of assigning that user to the purchasing group.my concern is,Will we get any inconsistencies if we assign the user to the purchasing group now.Because  some of the documents already created with that Purchase org  assignment.Please share your views in order to solve our issue
Thank you,
chakradhar.

Vijay,
Check if this link helps you...
Sales Manager partner determination
JD

Similar Messages

  • Workflow comes to the creator of the invoice instead of user assigned

    Hi ,
           I am facing some problem in my workflow. This workflo triggered from t code FV60 to Cost center owner creator of the invoice.  Vendor master is Blank and XREF3 field is assigned with user id, then any invoice rejected by the cost center responsible, should trigger a mail to the user assigned in XREF3 field.
    when Cost center owner  rejects the invoice and workflow comes to the creator of the invoice instead of user assigned in XREF3 field. please help me.

    Hi,
    Correct me if am wrong :- Creator of the invoice is the initator of the workflow rite...
    so check in the binding whether anywhere WF_INITIATOR is binded or not?
    Regards
    Narin

  • Transport roles and analysis authorization with user assigned

    Hi expert,
    I face with this problem transport roles and analysis authorization with user assigned. When I have created a transport request to move the roles and analysis authorization from development system to test system. I couldnu2019t maintain the user assigned, after transport I have to assigned manually all of user or create a program to fill AGR_USER table or there are other way.
    Thanks for your time,
    Luis

    Hi,
    In role administration, you have the following options for transporting roles:
    You can download the roles from one system and upload them into another  
    You can import the role from a remote system using RFC  
    You can transport the roles with the transport function.
    Role upload loads all role data, including authorization data from a file into the SAP system. The user assignments for the role and the generated profiles for the role are exceptions in this case.
    Transporting Roles with the Role Transport Function
           1.      Start the role administration function by choosing Tools ® Administration ® User Maintenance ® Role Administration ® Roles (transaction PFCG).
           2.      Enter the role to be transported and choose Transport Role.
    The Mass Transport of Roles screen appears. You can control the default settings for the options Also transport single roles for composite roles and Also transport generated profiles for roles using Customizing switches (see Role Administration Functions in the section Functions of the Utilities Menu).
    You should not change the authorizations profiles of the role after you have included the role in a transport request. If you need to change the profiles or generate them for the first time, transport the entire role again afterwards.
    For more information go thrpugh the below link
    http://help.sap.com/saphelp_nw70/helpdata/EN/6d/7c8cfd410ea040aadf92e1f78107a4/content.htm
    Regards,
    Marasa.

  • Extraction of roles content and user assignment

    Dear all,
    we want to transfer some CCA-rights to BI into a table, which will be referenced in a role in BI.
    Purpose is to tranfer the authorization concept from ERP to BI.
    I have to write for this some function module, which might be a bit complex but not impossible.
    Has anyone experience with this?
    Regards
    Harald.

    HII,
    To search for  roles with no users assignment u can run a report RSUSR070 AFTER EXECUTING TCODE SA38 in the progran field enter the name of the report and click execute button u get roles by complex selection criteria    then scroll down and in the selection according to user assignments  select  without user assignment then cli ck execute button u will get the roles with no user assigments............
                          Thanks and regards

  • Let user assign header for Report Painter Report

    Hi all,
    I would like to let the user assign the header while generate the report.
    (Because the report is somewhat dynamic)
    Here the details of my requirement:
    1) Let the user input the header text in the selection screen of the report
    2) Display the inputted text as the header ( Which setup at GRR2 via Extras > Rport Texts -> Headers)
    Or any possible dynamic method will be welcome.
    Tried to define a variable for this, but unused variable will not show up for selection when setup header
    Regards
    Bill

    Bill --
    are you writing an ALV report ?
    if yes, you try something like this--
    START-OF-SELECTION.
      PERFORM SET_TITLE USING TITLE. 
    CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
          EXPORTING
    *      I_INTERFACE_CHECK = 'X'
            i_callback_program      = gd_repid
    *      i_callback_top_of_page  = 'TOP-OF-PAGE'
    **      i_callback_user_command = 'USER_COMMAND_ALV'
    **       I_CALLBACK_PF_STATUS_SET = 'ZSTATUS_MUSTER'
            it_fieldcat             = fieldcatalog[]
            i_save                  = 'X'
            IS_LAYOUT                = GD_LAYOUT
            is_variant              = g_variant
             I_GRID_TITLE           = TITLE " Gives the Title to the ALV report.
          TABLES
            t_outtab                = IT_MUSTER
          EXCEPTIONS
            program_error           = 1
            OTHERS                  = 2.
    FORM SET_TITLE USING TITLE.
    TITLE = <YOUR TITLE ON SELECTION SCREEN>
    ENDFORM.                    " SET_TITLE
    Regards,
    Sumit

  • Issue in Step 12-Maintain User Assignment in Portal (RSPOR_SETUP)

    Hi,
    I had issue with step 12--Maintain User Assignment in Portal when running prog RSPOR_SETUP [to setup BEx Web configuration] with error " System failure during call of function module RSWR_RFC_SERVICE_TEST".
    Note: BI certificate was already exported & imported to Portal.
    Evaluate Ticket Login Module is done with trustedsys, trustediss & trusteddn.
    Evaluate Assertion Ticket Login Module is done with trustedsys, trustediss & trusteddn.
    User-id: bex_admin with SAP_ALL in ABAP and mapping is done in Portal as per step 12 intruction.
    <b>Error in dev_jrfc.trc:</b>
    Exception thrown [Tue Jan 16 09:24:46,102]:Exception thrown by application running in JCo Server
    com.sap.engine.services.rfcengine.RFCException: Incoming call is not authorized
            at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:74)
    Caused by: com.sap.engine.services.security.exceptions.BaseLoginException: Authentication failed.
    Caused by: com.sap.security.core.server.jaas.DetailedLoginException: Authentication failed: Issuer of SAP Logon Ticket is not trusted. Authentication stack: evaluate_assertion_ticket
            at com.sap.engine.services.security.login.ModulesProcessAction.run(ModulesProcessAction.java:167)
    It looks like the issue with <b>evaluate_assertion_ticket</b> & somehow Portal is not trusted the BI certificate.  I tried SAP note 917950, 888687, 878455, 721815, etc. & many more but cannot resolved the issue.
    SAP system: NW04s with Java add-in in the same server.
    SP stack 9
    I appreciate if someone already resolved the same issue and share the solution. I already opened a ticket with SAP but they have no solution yet.
    Thanks.
    Mimosa

    Hi
    Try maintaining the following property values for the SAP BW System:
    Authentication Ticket Type = SAP Assertion Ticket
                      Logon Method = SAPLOGONTICKET
              User Mapping Type = admin,user
    Regards,
    Trikanth Basetty

  • User assignment to purchasing organisation and purchasing groups

    Dear Experts,
    My issue is related to user assignment to purchasing organisation and purchasing groups.
    According to the project requirement, we are using central purchasing organisation and we should create the purchasing organisations and purchasing groups locally. it is not reflected from the back end systems through RFC.
    Also we have one more team working with indirect materials and they also use SRM. They have already created the organisation model. Two projects are inter-related and belongs to same department in the company, but main different is one uses direct and the other in-direct materials.
    Now we should create our purchasing organisation and purchasing groups and assign the users to it.
    If we create it separately means not uder the main root and assign the users, we are able to create shopping cart till the contract. But when i create the new purchasing organisation and purchasing groups under the main root which is created for other project which deals with in-direct materails, i am not able to create shopping cart with the user. I am getting the error
    ' Process scheme could not be found
    Please let me know how to deal with this scenario. here i need to add the purchasing organisation and purchasing groups under main root because of the reason that in the other project, purchasing organisation and purchasing groups defined needs to be accessed by our users as well. I mean the users should be able to access all the purchasing organisation and purchasing groups created under root node which gets the purchasing organisation and purchasing groups from the back end systems and the purchasing organisation and purchasing groups we created manually since we cant get it from back end system since it is central purchasing organisation.
    Please asvise
    Best regards,
    Srinath
    Edited by: srinath_Vijaya on May 27, 2010 4:21 PM

    Hello Masa,
    Thanks very much for your time and solution.
    Actually the problem was something else and was fixed.
    The reason for getting error 'Process schema was not yet defined' is because of missing definition of process schedma for the workflow since the process based workflow setting has been activated.
    So this has been resolved by copying the sap standard customizing BC set for SRM workflow using transaction SAPR20 and then process schema for workflow got configured or copied automatically from SAP BC set and the error was removed.
    Also the reason for error with user was that no purchaser assignment was done to the purchasing organisation and now it has been done and the users can access the SRM and create shopping cart and the contract.
    Regards,
    Srinath

  • User assignment not happening in UME for CC Roles

    Hi Experts,
    We have installed the GRC AC 5.3 RAR Component in one of our server. As a part of post installation activity we have uploaded the cc_ume.txt files in the component and created a AC Administrator user.
    We have assigned the roles VIRSA_CC_ADMINISTRATOR role to the user and it is showing as assigned. But when we checked in the Role - VIRSA_CC_ADMINISTRATOR for the user assignment it is appearing as NO USER ASSIGNED to the role.
    Because of which we are unable to login ino the RAR tool with the administrator id. The same UME login page is appearing when we login with the AC Admin user id & password without giving any error messages.
    Please help us if anybody has faced the same problem and got it solved.
    Thanks and Best Regards,
    Srihari.K

    issue resolved

  • Error "Approval workflow fragment has no user assignment"

    Hi all,
    We are implementing the workflow for  n level approval of SC WS14000133.Now when we try to add adhoc approvers by clicking on the ADD APPROVER button,we get the foll error:
    "Approval workflow fragment has no user assignment".
    I have already referred similar threads on SDN and also the corresponding notes including this one,Error "Approval workflow fragment has no user assignment".The latest note for this error applies for SP08 while we are on SRM server 5.5(SP11).
    Has anybody faced a similar issue before?Any inputs will be appreciated.
    regards,
    SRM Tech.

    Hi SRM_TECH,
       I am facing the issue. i am also in SRM5.5 and SP11. since i you are in the same SP level can you please help me out how did you fix this issue..
    Thanks,
    John.

  • How get report of all user assigned tcode & object activety wise

    Dear All,
    We need to get report of user assign tcode & assign tcode wise activety.
    Regards
    jitendra Singh

    Hi Colleen,
    but we are checked all below table related to authorization & user
    1. USR02 --> User Name
    2. AGR_USERS --> User Name & Role Name
    3. AGR_TCODES --> Role Name & Transaction Code
    4. AGR_PROF --> Role Name & Profile Name
    TSTCA
    Also,
    5. AGR_DEFINE --> For more detail role information
    USR01 contains the runtime data of the user master records
    USR02 is the table containing logon information such as the password
    USR03 includes the users' address information
    USR04 contains users' authorizations
    USR05 is the users' parameter ID table
    USR09 contains user menus
    USR10 is the table for user authorization profiles
    USR11 contains the descriptive texts for profiles
    USR12 is the user master authorization values table
    USR13 contains the descriptive short texts for authorizations
    USR14 contains the logon language versions per user
    USR30 includes additional information for user menus
    USH02, USH04, USH10 and USH12 contains Users and profile and
    authorization change history data.
    Tables related with authorizations objects and authorization fields are as follows:
    TOBJ is the authorization objects table containing the authorization
    fields for each.
    TACT contains the list of standard activities authorization fields
    in the system.
    TACTZ is the table which defines the relationship between the
    authorization objects and the activities in those objects containing
    the Activity authorization field.
    TSTC is the transaction code table where authorization objects
    and values can be defined.
    but not getting any fruit full result.
    we are try to create SQVI query but not find the corresponding table.
    created user against role & role against Tcode  but not getting tcode against activity file value for particular user
    please help me for the same

  • User Assigned to Org.unit

    Hi all...
    I have list of user ..i want to find these users assigned to org.unit ?
    i need the list in production.. so i can't write the code...
    how can i find? any view or direct table which will list these stuff..
    thanks...

    Hello,
    Use HRP1001 table:
    SELECT objid FROM hrp1001 WHERE sobid = 'user ID' AND plvar = 'active PLVAR'
    SELECT sobid FROM hrp1001 WHERE objid = objid
    SELECT sobid FROM hrp1001 WHERE otype = 'S' AND objid = sobid AND sclas = 'O'.
    Regards.
    Laurent.

  • Your user has no SAP Support Portal user assigned

    Hi all,
    in transaction SM37 I found a job that almost everytime ends with error. Name of the job is "SM:SYNC SAP SESSIONS" and it's executed daily. The error message is :
    Job started
    Step 001 started (program RDSWPCISERVICEPLAN, variant &0000000000452, user ID SYS_JOBYSAP)
    Your user has no SAP Support Portal user assigned
    Job cancelled after system exception ERROR_MESSAGE
    Everyday the job is scheduled automatically by another job "SM:SCHEDULER". I suppose that is same on your systems.
    I know the error message say that I should try to assign S-user to user SYS_JOBYSAP but I think it should not be the problem because some days the job ends with no errors. Also when I duplicate some old job (with status Cancelled) and execute it immediately the job ends in green.
    Do you have any idea what could be wrong? Is it possible that there is some problem with connection to SAP almost regularly everyday in same time?
    Best regards,
    Zbynek

    I would like to check whether the SAP service that is used by job SM:SYNC SAP SESSIONS is running in given time. I need to re-schedule job SM:SYNC SAP SESSIONS to other time. How is it possible? I think the job SM:SCHEDULER uses some table that contains detail informations about scheduled jobs. Is it right? Do you know name of the table?
    Regards
    Zbynek

  • Restrict Moving roles with user assignment

    Hi There,
    Need your help...
    How to restrict to move roles from dev->QA with user assignment. (want to disable the user assignment restirction)
    Thanks and Regards,
    Gnanaprakasam

    Unfortunately this is not the default installation setting, so you need to go into the security settings customizing and change the USER_REL_IMPORT switch to 'NO'.
    This does however NOT make the checkbox disappear in the transport source system. It prevents the import in the target... so you must set it and transport it there first, then it works.
    Cheers,
    Julius

  • Moving roles with user assignment

    Hi There,
    Need your help...
    We have roles and users created in QA for training, now we want to move roles from QA to Production with user assignment.
    Users that are created in QA for training have also been created in Production, is it possible to move the roles from QA to Production with the user assignment.
    Thanks and Regards,
    Azher.

    Table PRGN_CUST does'nt contain any entries, its an empy table in QA.
    USER_REL_TRANSPORT entry with value NO locks system from TR imports with User assignment. So you have to ensure your target system-Production does not has that entry in PRGN_CUST.
    TR is geting created in Local change request which cannot be moved to Production.
    This TR request are created in Local Change request only when you do not specify a target system/group . All you need to do is specify the "Target" while creating the TR in PFCG (subsequent screen after you hit Create request) and release your TR via SE10. Once released, the TR would be added to the import queue of Production. You/your Basis team can import it manually via STMS_IMPORT (Extras>Other requests>Add TR and CTRL+F11 to import). If there are any errors please have Basis team to review the transport logs.
    P.S:  You can only transport direct user assignments of roles via PFCG transport option described in my post. In case of indirect user assignments that were created using Organizational Management (HR-Org), you will have to use transport functionality in Organizational management.
    Thanks
    Sandipan

  • CProjects - Multiple Users Assignment to single task

    Hi All,
             Can we assign multiple users to a single task, by making them in a User Group.
    regards,
    rajesh.

    Hi rajesh,
    Sure, I hope, you are talk about cProject 4.0.
    You can create a role, which have different business partner (users) assigned . you can assign then such business partner (one or multiple) to the task.
    But you can only have a business parnter as responsible.
    Using User-Group is used only for the authorisation aspect.
    Kind regards,
    Zhenbo

Maybe you are looking for