Regarding using of devfsadm/devfsadmd

Hi,
I am using multipath storage and create my own logical devices.
I want to create library file which will create link for my logical devices to actual scsi devices.
I am currently creating library file which will be called by devfsadm utility.
Did Oracle Solaris provides any standards/document to create that library (which will be called by devfsadm, if copied along with system library files)
Any kind of help will be highly appreciated. Thanks in advance.
Regards,
Rahul
Edited by: 895256 on Dec 7, 2011 7:21 AM

Hi Shaik,
if you read the BAPI documentation you can see so many examples with good explanation.
you can see nearly 10 examples in it with different Cases.
Regards
Vijay

Similar Messages

What are the limitations regarding use of video in an iBook: length, file size, etc?

What are the limitations regarding use of video in an iBook: length, file size, etc?

Total book size is 2.0GB max. Length would be relative to size based on quality.
See:
- Optimizing performance in your iBooks Author books
- iBooks Author: Add video to your iBook

Query regarding Useful Life

Hi SAP guru
I have one query regarding useful life of asset,
If i purchased a asset in rs 200000 , wdv rate is 20% and put the useful life 4 year, in last year i want to depreciate the asset upto 1 Rs.
Capitalisation date is 01.04.2008.
Ex -     Acquisition value   Ordinary depreciation net book value
2008 200,000.00               40,000.00-             160,000.00
2009 200,000.00                32,000.00-           128,000.00
2010 200,000.00                25,600.00-           102,400.00
2011   200,000.00               20,480.00-           81,920.00
2012 200,000.00                                          81,920.00
Client requirement is in year 2011 asset should depreciate upto Rs 1.
Appreciate your reply.
Regards
Anjan

If you want to your asset depreciation based on useful life that is 4 years, please select check box Rem.life in multi level method of that dep. key.and enter the useful life as 4 years in the assets master.
when come to restricting value to 1Re. specify the memo value for that asset class.
AA>Valuation>Amt.specification>Specify memo value.

Question regarding using links in Discoverer 10g

Hi All,
I have a workbook which uses links. The 1st worksheet is connected to the second worksheet using a simple parameter and link. It works fine.
But when a users saves this report and tries to use the link, Discoverer tries to open the work sheet from the query which I had created and not the one from the worksheet which the user has saved.
I am not sure if that the regular feature of the Link functionality or if there is a bug/workaround.
Is it possible to set these reports to open the worksheet from the saved workbook instead of the original one.
Any help is appreciated. Please let me know if I have confused you.
Thanks.

Hi,
I've had a look at this on Metalink and there seems to be lots of different bugs with manage links on 10g.
We build our reports under one user and share it with all other users, easier to manage. We've built some reports exactly has you have and it also works fine. I'll try to resave this as another user and see if we have the same problem.
For info there are links to several different bugs related to lots of scenarios Here (You'll need metalink access).
Couldn't find your exact problem in there so you want to raise it with Oracle.
Regards,
Lloyd

A question regarding using a JDBC class to connect with cloud service database

Hello,
I am currently working on a small scale cloud service report where the company I chose is obviously Oracle. My question is regarding the cloud service in the following way. I was doing my report with the free trial until it just came to me that
why not to do a small one class program with my netBeans or Eclipse that uses JDBC but I am not sure what username, password and the url to use in the connection to retrieve, manipulate and store values. Can somebody help me please if this is possible or not?
edit: Anyone please? I have a deadline in 15.8. and could create something great until then if I get the anwser in few days

To correct my question, I already have the oracle account and I created the cloud service trial account with database and java section.

Questions regarding using the .monitor command to retur a animated image and we would like feedback to a designed webpage that is monitoring a 5kW windturbine:)

I'm embedding a front panel image in an existing HTML dokument. I would like to use the command .monitor in the URL together with the refresh command so the VI automatic will reload every 20 secund. This actual work, but simultaneous I want to have the possibility to refresh manually so I don't have to wait 20 sec before new values is shown in the display. Is this possible to do?
Another question: Since the real time display updates 1-2 times a secund the command .monitor is used to get a animated picture of the Real Time Display.
There are several ways to add animation on to web pages. The techniques used h
ere are the �server push� and �client pull�which makes the browser repeatedly reloads a changing inline image to provide crude animated sequences. This is not the most efficient way as this result�s in an image being re-transmitted for each frame of the animation. The command .monitor with the attribute refresh and lifespan in the URL trigger this �server push� and �client pull� techniques.
I use this automatic refresh uploading of the display so that it each time shows different values, is this called crude animation?Then I'm wondering what I'm suppose to use the command lifespan to?I can't see the use of it in my display.....?
link to the webpage so you can have a look at the display:
http://134.7.139.176/.monitor?Real%20Time%20Performance.vi&refresh=20
This is a project that I'm working together with another Norwegian friend. WE are very happy for feedback on our web page and displays go to: http://www.ece.curtin.edu.au/~peersena/ if you would like to view itThanks

Annis,
One of the other things to keep in mind is that the generation of an image does take some computing power so having the generation and the acquistion on the same machine is not always ideal. If you're using the machine that is publishing the front panel just to collect data it's not so much of an issue.
If you really want to monitor in "Real-Time" using Remote Panels (requies LabVIEW 6.1) is your best option. This posting has more information on using Remote Panels and links to some live examples:
http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RPAGEID=135&HOID=506500000008000000C0660000&UCATEGORY_0=_49_%24_6_&UCATEGORY_S=0&USEARCHCONTEXT_TIER_0=0&USEARCHCONTEXT_TIER_S=0&USEARCHCONTEXT_QUESTION_0=web+control&USEARCHCONTEXT_QUESTION_S=0
Remote panels makes it possible to control the application remotely as well.
With .monitor the only way I've been able to manually refresh is to "Shift+Refresh" on the browser.
Regards,
Kamran

Best Practice regarding using and implementing the pref.txt file

Hi All,
I would like to start a post regarding what is Best Practice in using and implementing the pref.txt file. We have reached a stage where we are about to go live with Discoverer Viewer, and I am interested to know what others have encountered or done to with their pref.txt file and viewer look and feel..
Have any of you been able to add additional lines into the file, please share ;-)
Look forward to your replies.
Lance

Hi Lance
Wow, what a question and the simple answer is - it depends. It depends on whether you want to do the query predictor, whether you want to increase the timeouts for users and lists of values, whether you want to have the Plus available items and Selected items panes displayed by default, and so on.
Typically, most organizations go with the defaults with the exception that you might want to consider turning off the query predictor. That predictor is usually a pain in the neck and most companies turn it off, thus increasing query performance.
Do you have a copy of my Discoverer 10g Handbook? If so, take a look at pages 785 to 799 where I discuss in detail all of the preferences and their impact.
I hope this helps
Best wishes
Michael Armstrong-Smith
URL: http://learndiscoverer.com
Blog: http://learndiscoverer.blogspot.com

Any "Best Practice" regarding use of zfs in LDOM with zones

I have 3 different networks and I want to create a guest-domain for each of the three networks on the same control domain.
Inside each guest-domain, I want to create 3 zones.
To make it easy to handle growth and also make the zones more portable, I want to create a zpool inside each guest domain and then a zfs for each zoneroot.
By doing this I will be able to handle growth by adding vdisks to the zpool(in the guest domain) and also to migrate individual zones by using zfs send/receive.
In the "LDoms Community Cookbook", I found a description on how to use zfs clone in the control domain to decrease deploy time of new guest domains:
" You can use ZFS to very efficiently, easily and quickly, take a copy of a previously prepared "golden" boot disk for one domain and redeploy multiple copies of that image as a pre-installed boot disk for other domains."
I can see clear advantages in using zfs in both the control domain and the guest domain, but what is the downside?
I ends up with a kind of nested zfs where I create a zpool inside a zpool, the first in the control domain and the second inside a guest domain.
How is zfs caching handled, will I end up with a solution with performance problems and a lot of I/O overhead?
Kindest,
Tor

I'm not familiar with the Sybase agent code and you are correct, only 15.0.3 seems to be supported. I think we'd need a little more debug information to determine if there was a workaround. May be switching on *.info messages in syslogd.conf might get some more useful hints (no guarantee).
Unfortunately, I can't comment on if, or when, Sybase 15.5.x might be supported.
Regards,
Tim
---

Regarding using BAPI s

Dear Friends,
                   Can anyone tell how to use BAPI s in our programs as i have knowledge in creating a bapi.
                   I know what BAPI s are, and have founded no information how to use it externally to connect other external systems or to use it in a single client for data transfer.
                   Can u please give a demo example using systems BAPI s .
Thanking you

Hope following code will help you
Fill header level details
      CLEAR: LS_ORDER,
             LS_ORDERX.
      LS_ORDER-SALES_ORG = SO_VKORG.
      LS_ORDER-DISTR_CHAN = SO_VTWEG.
      LS_ORDERX-UPDATEFLAG = 'U'.
Assign Docno to Temp Doc no.
delete Sales item
      LS_ITEM-ITM_NUMBER = LS_VBAP-POSNR.
      LS_ITEM-MATERIAL = LS_VBAP-MATNR.
      LS_ITEMX-ITM_NUMBER = LS_VBAP-POSNR.
      LS_ITEMX-UPDATEFLAG = 'D'.
      APPEND LS_ITEM TO LT_ITEM.
      APPEND LS_ITEMX TO LT_ITEMX.
*else . fill itab .continue.
Call BAPI to delete item of the sales order
      CALL FUNCTION 'BAPI_SALESDOCUMENT_CHANGE'
        EXPORTING
          SALESDOCUMENT            = L_SALESDOCUMENT
          ORDER_HEADER_IN          = LS_ORDER
          ORDER_HEADER_INX         = LS_ORDERX
         INT_NUMBER_ASSIGNMENT    = int_num_assign
SIMULATION               = ' '
        TABLES
          RETURN                   = LT_RETURN
          ITEM_IN                  = LT_ITEM
          ITEM_INX                 = LT_ITEMX.
      DESCRIBE TABLE LT_RETURN LINES L_LINES.
      READ TABLE LT_RETURN INTO LS_RETURN INDEX L_LINES.
      IF NOT LS_RETURN-TYPE EQ 'E'.
Commit work
        CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
             EXPORTING
                  wait   = 'X'
             IMPORTING
                  return = l_subrc.
reward Points
regards..

A question regarding using Myriad Pro as a web font...

Okay so this is a pretty straight forward question (I think)...
I've been using sIFR to replace many of the typical web fonts on the sites I build since much like everyone else I'm sick of being restricted to using only certain fonts.
Myriad Pro is one of the many fonts I really like for building websites. I discovered recently by accident that Myriad Pro (and a few other variants in the Myriad Pro family) are part of Adobe Reader. This means that ANYONE who downloads Adobe Reader has Myriad Pro installed on their system and probably doesn't even realize it.
Having discovered this it has come to my attention that there is a decent possibility I could use CSS and have Myriad Pro as a web font without even having to render it using sIFR. The problem is that anyone who doesn't have Adobe Reader installed wouldn't see the nice Myriad font.
So my question is what do all of you guys think about this? Does anyone have any actual numbers in regards to how many people actually have Adobe Reader? If it was a higher percentage like 90% then I think this would be a safe solution.

I don't know how many people use Adobe Reader, although I would think it's a fairly high proportion. Perhaps not as high as 90%, though. However, there's nothing stopping you from using Myriad Pro as the first choice in a font-family declaration. Browsers use the first available font. You could use something like this:
body {
font-family:"Myriad Pro", "Gill Sans", "Lucida Sans", Verdana, Geneva, sans-serif;

Regarding use of java code inside javascript

Hi ,
I have doubt regarding how to use java code inside javascript,
i am giving my application code here
<%@page import="java.util.*"%>
<%@ page import="com.suuny.sard.pmt.pat.*"%>
<SCRIPT LANGUAGE="JavaScript">
function fun(){
     var ac=document.login.Projectname.options[document.login.Projectname.selectedIndex].value;
     var c = document.login.task1.value;
     alert(ac);
     alert(c);
     return true;
</SCRIPT>
<form name="login" action="/pmt/jsp/Leavemanagement/Leave_Ems_HomePage.jsp" method="get" encType="x-www-form-encoded" >
<table width="100%" Align="Center" cellspacing="0" cellpadding="0" border="0">
<tr class="tablerow"><td colspan="6" align="center"><font class="pagehead" align="center">Create Tasks</font></td></tr>
     <tr class="tableheader">
          <th>Project
          <th>Task-Id
          <th>TaskName
          <th>Assigned To
          <th>description
          <th>Milestone
     </tr>
     <%
          for(int i=1;i<2;i++){%>
               <tr class="tablerow"><td align="center">
               <select class="SELECT" NAME="Projectname" VALUE=" " onchange="return fun();" >
               
               <%
                    ArrayList ar =null;
                    ArrayList projectids=null;
                    Hashtable ht = new Hashtable();
                    ProjectNames pnames=new ProjectNames();
               ht = pnames.getProjectNames();
                    ar=(ArrayList)ht.get("projects");
                    projectids=(ArrayList)ht.get("projectIds");
                    for(int j=0;j<ar.size();j++){
                    out.println("<option value=\""+projectids.get(j)+"\">"+ar.get(j)+"</option>");
               %>
</select>
     <%
               out.println("<td align=\"center\"><input type=\"text\" name=\"task"+i+"\"value=\"\" size=\"25\"></td>");
               out.println("<td align=\"center\"><input type=\"text\" name=\"taskname"+i+"\"value=\"\" size=\"25\"></td>");
          %>
          <td align="center">
                         <select class="SELECT" NAME="Projectname1" VALUE=" ">
                         
                         <%
                              ArrayList ar1 =null;
                         ar1 = pnames.getProjectResource("VXML02");
                              for(int j=0;j<ar1.size();j++){
                              out.println("<option value=\""+ar1.get(j)+"\">"+ar1.get(j)+"</option>");
                         %>
</select>
          <%
               out.println("<td align=\"center\"><input type=\"text\" name=\"description"+i+"\"value=\"\" size=\"25\"></td>");
               out.println("<td align=\"center\"><input type=\"text\" name=\"milestone"+i+"\"value=\"\" size=\"25\"></td><tr>");
          out.println("<tr class=\"tablerow\"><td colspan=\"6\" align=\"center\"><input class=\"txtbuttonsmall\" type=\"submit\" value=\"save\"></td>");
     %>
</Table>
</form>
My question is :
I selected one project from first combo box ,i need project members corresponding to the project.
In my code "pnames.getProjectResource("VXML02");" in this function iam passing one static projrct value,but i need dynamically selected project from first combo box(<select class="SELECT" NAME="Projectname" VALUE=" " onchange="return fun();" >),so please help me guys.

Hi Marco,
I "executed" some java code within XSLs file. I have quoted the word executed because I didn't really run java code, but I used a simply trick that I describe you below.
Into your XSLs put an iframe which is hided (it has an height of 0 pixel). As src of the iframe put the address of a portal component which execute your code (in my case calculate some PCD URL of some pages into a defined role). As result of component execution, I use the response.write method in order to execute some jscript code, which is able to interact with the HTML generated by XSLs files, for example in my case response.write put the PCD URL into a drop down list placed into the "edit" form.
This works fine. I don't know if is suitable also for your case, anyway could be a hint, but pay attention to Roland's recommendations.
Ciao
Roberto

Regarding use of radio button

Dear All,
   I add two radio button in my form. And they work. One button for 'male' and another for 'female'.
When i click male button then it sends '1' to database in the respective field and
when i click female button then it sends '2' to database.
But i need 'M' for male and 'F' for female.
what is the solution.
Good day.
                                                                              Regards
                                                             Bodhisatya Bhattacharjee

Try something like this for the first Option button ...
        Dim oOptionBtn As SAPbouiCOM.OptionBtn
        With oItem
            .Left = 100
            .Top = 100
            .Width = 50
            .Height = 20
            oOptionBtn = .Specific
        End With
        With oOptionBtn ' data bind
            .Caption = strCaption
            .ValOn = 'M'
            .ValOff = 'F'
            If Len(strGroupWith) > 0 Then .GroupWith(strGroupWith) ' Use tihis to group the option buttons
            If Len(Trim(strFieldName)) > 0 Then .DataBind.SetBound(True, "", "FIELD1")
        End With
and then set the
ValOn = 'F'
and .
ValOff = 'M'
for the other button.
hope it works for you
null

Regarding using of BAPI F.M - BAPI_INCOMINGINVOICE_PARK

Hi All,
Can any body give example program of using the BAPI Function Module <b>BAPI_INCOMINGINVOICE_PARK</b>.
My Program puprpose here is to - <b>Special Charges in Purchase Order's</b>.
(or)
<b>Payble document for P.O Special Charges</b>
Can anybody give me idea how to make use of it.
Thanks in advance.
Thanks & Regards,
Rayeez.

Hi Shaik,
if you read the BAPI documentation you can see so many examples with good explanation.
you can see nearly 10 examples in it with different Cases.
Regards
Vijay

Urgent Help Regarding Using Sound Files

Hello,
Using Java is it possible to
a) represent a .WAV file in WAVE FORM Format (Graph) output.i.e to represent a
audio file pictorially.
b) Spilit a .WAV file into n small pieces or portions.
Please guide me in this regard.Its Urgent
Thankz

Hello,
Using Java is it possible to
a) represent a .WAV file in WAVE FORM Format (Graph)
output.i.e to represent a
audio file pictorially.Open the AudioInputStream, read the AudioFormat, then read the frames one at a time and plot the data.
Here's some code that plays a wave file using the AudioInputStream. Java Sound, see reply 2. this shows how to open the file and get the format, it just plays it, but is able to plays it, but it does read frames. This should provide a start for you.
b) Spilit a .WAV file into n small pieces or portions.Yes, see the classes in package javax.sound.sampled.
>
>
Please guide me in this regard.Its UrgentDon't mark your posts as urgent, don't cross post.
ThankzYou're welcome, hope this helps

Help for views regarding using Liferay for an already developed project.

Hi all,
I don't know if I am posting this question in the right place. If I am then extremely sorry. Guide me to post in right place. I have already posted in Liferay forum but still no reply!
First of all, let me tell you what I am or my company is intended to do. We have already developed a project using Java, JSP and Servlet. We want it to integrate with Liferay so that we can change logo, css, images, themes or any other UI related component at run time using Liferay admin panel. But backend should be what we have developed. In short, UI of our project is controlled by Liferay but control of data displayed on UI or submitted from UI should be from our developed backend code.
Now I have a few questions regarding above said approach of fulfilling the requirement:-
1) What we are trying to do is possible?
2) Is this approach recommendable for what we intended to do?
3) Or do we need to develop our project from scratch to fit into Liferay? Like developing portlets and deploying in Liferay or other approach that has been given in Liferay documentation.
4) What about database integration? We have around 15 columns/fields in user table in database of our project which is completely different from that of Liferay's user table.
Liferay is a very new for us. We have checked the documentation section of Liferay but still few things like above said requirements and its implementation is not clear. Also, we would like to know in what scenarios/requirements Liferay is useful.
Eagerly waiting for your views. Any help will be very much appreciated.
Thanks

Hi all,
I don't know if I am posting this question in the right place. If I am then extremely sorry. Guide me to post in right place. I have already posted in Liferay forum but still no reply!
First of all, let me tell you what I am or my company is intended to do. We have already developed a project using Java, JSP and Servlet. We want it to integrate with Liferay so that we can change logo, css, images, themes or any other UI related component at run time using Liferay admin panel. But backend should be what we have developed. In short, UI of our project is controlled by Liferay but control of data displayed on UI or submitted from UI should be from our developed backend code.
Now I have a few questions regarding above said approach of fulfilling the requirement:-
1) What we are trying to do is possible?
2) Is this approach recommendable for what we intended to do?
3) Or do we need to develop our project from scratch to fit into Liferay? Like developing portlets and deploying in Liferay or other approach that has been given in Liferay documentation.
4) What about database integration? We have around 15 columns/fields in user table in database of our project which is completely different from that of Liferay's user table.
Liferay is a very new for us. We have checked the documentation section of Liferay but still few things like above said requirements and its implementation is not clear. Also, we would like to know in what scenarios/requirements Liferay is useful.
Eagerly waiting for your views. Any help will be very much appreciated.
Thanks

Regarding using of devfsadm/devfsadmd

Similar Messages

Maybe you are looking for