Regarding variant function module in alv

hi,
could any body tell about the function modules
reuse_alv_variant_default_get
reuse_alv_variant_f4
reuse_alv_variant_existence
and how to use it.(by giving an example program)
Regards,
Pavan.

reuse_alv_variant_default_get - Provides the default variant for the list specified in the structure parameter CS_VARIANT of a program.
reuse_alv_variant_f4 - Display variant selection dialog box. Possible entries help, if the variant is defined explicitly as an input field on a screen. The selection must be specified by at least partially filling the parameter structure IS_VARIANT.
reuse_alv_variant_existence - This function module checks the existence in the database of a display variant passed in the interface.
Check the Link for Example REUSE_ALV_VARIANT_F4' how to use it when we iuse it
Kanagaraja L
Edited by: Kanagaraja Lokanathan on Jan 17, 2008 5:39 AM

Similar Messages

About function module in alv

hai all
iwant to know about few function modules in alv
1) reuse_alv_default_varients_get.
2)reuse alv_varients_f4
what is the use of these function modules
how to use these function modules, what r the structures used to use these function module. where to pass this in
in list and grid display function modules.
plz help me.
thanks & regards
sindu

HI,
check this.
REPORT Z_TEST_alv_variant .
TYPE-POOLS : SLIS.
PARAMETERS: ONE RADIOBUTTON GROUP G1 DEFAULT 'X',
 TWO RADIOBUTTON GROUP G1.
DATA: BEGIN OF I_TAB OCCURS 0,
FIELD1 TYPE I,
FIELD2 TYPE I,
END OF I_TAB.
DATA: GT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
 LS_FIELDCAT TYPE SLIS_FIELDCAT_ALV.
DATA: L_VARIANT TYPE DISVARIANT,
 LX_VARIANT LIKE DISVARIANT,
 L_SAVE TYPE C,
 L_EXIT(1) TYPE C.
SELECTION-SCREEN BEGIN OF BLOCK 0 WITH FRAME TITLE TEXT-VAR.
PARAMETERS: P_VARI LIKE DISVARIANT-VARIANT.
SELECTION-SCREEN END OF BLOCK 0.
INITIALIZATION.
L_SAVE = 'A'.
PERFORM VARIANT_INIT.
Get default variant
LX_VARIANT = L_VARIANT.
CALL FUNCTION 'REUSE_ALV_VARIANT_DEFAULT_GET'
 EXPORTING
 I_SAVE = L_SAVE
 CHANGING
 CS_VARIANT = LX_VARIANT
 EXCEPTIONS
 NOT_FOUND = 2.
IF SY-SUBRC = 0.
 P_VARI = LX_VARIANT-VARIANT.
ENDIF.
Process on value request
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_VARI.
PERFORM F4_FOR_VARIANT.
I_TAB-FIELD1 = 19.
I_TAB-FIELD2 = 20.
APPEND I_TAB.
I_TAB-FIELD1 = 19.
I_TAB-FIELD2 = 20.
APPEND I_TAB.
I_TAB-FIELD1 = 19.
I_TAB-FIELD2 = 20.
APPEND I_TAB.
I_TAB-FIELD1 = 19.
I_TAB-FIELD2 = 20.
APPEND I_TAB.
I_TAB-FIELD1 = 19.
I_TAB-FIELD2 = 20.
APPEND I_TAB.
PERFORM INITIALIZE_FIELDCAT USING GT_FIELDCAT[].
PERFORM CALL_ALV TABLES I_TAB[]
 USING GT_FIELDCAT.
*& Form initialize_fieldcat
text
-->P_GT_FIELDCAT[] text
FORM INITIALIZE_FIELDCAT USING L_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV.
LS_FIELDCAT-FIELDNAME = 'FIELD1'.
LS_FIELDCAT-KEY = 'X'.
LS_FIELDCAT-COL_POS = 1.
LS_FIELDCAT-SELTEXT_S = 'Work center'.
LS_FIELDCAT-SELTEXT_L = 'Work center'.
APPEND LS_FIELDCAT TO L_FIELDCAT.
CLEAR LS_FIELDCAT.
LS_FIELDCAT-FIELDNAME = 'FIELD2'.
LS_FIELDCAT-KEY = ' '.
LS_FIELDCAT-COL_POS = 2.
LS_FIELDCAT-SELTEXT_S = 'Work center2'.
LS_FIELDCAT-SELTEXT_L = 'Work center2'.
APPEND LS_FIELDCAT TO L_FIELDCAT.
CLEAR LS_FIELDCAT.
ENDFORM. " initialize_fieldcat
*& Form call_alv
 text
 -->P_GT_FIELDCAT text
 -->P_I_TAB text
FORM CALL_ALV TABLES P_TAB
 USING P_GT_FIELDCAT .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
 EXPORTING
 I_CALLBACK_PROGRAM = SY-REPID
 IT_FIELDCAT = P_GT_FIELDCAT
 I_DEFAULT = 'X'
 IS_VARIANT = L_VARIANT
 I_SAVE = L_SAVE
 TABLES
 T_OUTTAB = P_TAB[]
 EXCEPTIONS
 PROGRAM_ERROR = 1
 OTHERS = 2.
IF SY-SUBRC <> 0.
 MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " call_alv
*& Form VARIANT_INIT
 text
FORM VARIANT_INIT.
CLEAR L_VARIANT.
L_VARIANT-REPORT = SY-REPID.
ENDFORM. " VARIANT_INIT
*& Form variant_SELECTION_SCREEN
 text
FORM VARIANT_SELECTION_SCREEN .
IF NOT P_VARI IS INITIAL.
 MOVE L_VARIANT TO LX_VARIANT.
 MOVE P_VARI TO LX_VARIANT-VARIANT.
 CALL FUNCTION 'REUSE_ALV_VARIANT_EXISTENCE'
 EXPORTING
 I_SAVE = L_SAVE
 CHANGING
 CS_VARIANT = LX_VARIANT.
 L_VARIANT = LX_VARIANT.
ELSE.
 PERFORM VARIANT_INIT.
ENDIF.
ENDFORM. " variant_SELECTION_SCREEN
*& Form F4_FOR_VARIANT
 text
FORM F4_FOR_VARIANT.
CALL FUNCTION 'REUSE_ALV_VARIANT_F4'
 EXPORTING
 IS_VARIANT = L_VARIANT
 I_SAVE = L_SAVE
 IMPORTING
 E_EXIT = L_EXIT
 ES_VARIANT = LX_VARIANT
 EXCEPTIONS
 NOT_FOUND = 2.
IF SY-SUBRC = 2.
 MESSAGE ID SY-MSGID TYPE 'S' NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ELSE.
 IF L_EXIT = SPACE.
 P_VARI = LX_VARIANT-VARIANT.
 ENDIF.
ENDIF.
ENDFORM. "F4_FOR_VARIANT
Regards,
Laxmi.

What is the difference b/w ALV Function Module and ALV Methods?

Hello Friends,
Can anybody help me in finding out the difference between ALV Function Modules and ALV methods?
Thanks & Regards
Sathish Kumar

Hi Sathish,
Plz go through this info. It is very useful.
hi,
chk these excellent links.
http://www.geocities.com/mpioud/Abap_programs.html
http://www.sapdevelopment.co.uk/reporting/reportinghome.htm
Simple ALV report
http://www.sapgenie.com/abap/controls/alvgrid.htm
http://wiki.ittoolbox.com/index.php/Code:Ultimate_ALV_table_toolbox
http://www.sapgenie.com/abap/controls/alvgrid.htm
http://wiki.ittoolbox.com/index.php/Code:Ultimate_ALV_table_toolbox
ALV
1. Please give me general info on ALV.
http://www.sapfans.com/forums/viewtopic.php?t=58286
http://www.sapfans.com/forums/viewtopic.php?t=76490
http://www.sapfans.com/forums/viewtopic.php?t=20591
http://www.sapfans.com/forums/viewtopic.php?t=66305 - this one discusses which way should you use - ABAP Objects calls or simple function modules.
2. How do I program double click in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=11601
http://www.sapfans.com/forums/viewtopic.php?t=23010
3. How do I add subtotals (I have problem to add them)...
http://www.sapfans.com/forums/viewtopic.php?t=20386
http://www.sapfans.com/forums/viewtopic.php?t=85191
http://www.sapfans.com/forums/viewtopic.php?t=88401
http://www.sapfans.com/forums/viewtopic.php?t=17335
4. How to add list heading like top-of-page in ABAP lists?
http://www.sapfans.com/forums/viewtopic.php?t=58775
http://www.sapfans.com/forums/viewtopic.php?t=60550
http://www.sapfans.com/forums/viewtopic.php?t=16629
5. How to print page number / total number of pages X/XX in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=29597 (no direct solution)
6. ALV printing problems. The favourite is: The first page shows the number of records selected but I don't need this.
http://www.sapfans.com/forums/viewtopic.php?t=64320
http://www.sapfans.com/forums/viewtopic.php?t=44477
7. How can I set the cell color in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=52107
8. How do I print a logo/graphics in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=81149
http://www.sapfans.com/forums/viewtopic.php?t=35498
http://www.sapfans.com/forums/viewtopic.php?t=5013
9. How do I create and use input-enabled fields in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=84933
http://www.sapfans.com/forums/viewtopic.php?t=69878
10. How can I use ALV for reports that are going to be run in background?
http://www.sapfans.com/forums/viewtopic.php?t=83243
http://www.sapfans.com/forums/viewtopic.php?t=19224
11. How can I display an icon in ALV? (Common requirement is traffic light icon).
http://www.sapfans.com/forums/viewtopic.php?t=79424
http://www.sapfans.com/forums/viewtopic.php?t=24512
12. How can I display a checkbox in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=88376
http://www.sapfans.com/forums/viewtopic.php?t=40968
http://www.sapfans.com/forums/viewtopic.php?t=6919
Go thru these programs they may help u to try on some hands on
ALV Demo program
BCALV_DEMO_HTML
BCALV_FULLSCREEN_DEMO ALV Demo: Fullscreen Mode
BCALV_FULLSCREEN_DEMO_CLASSIC ALV demo: Fullscreen mode
BCALV_GRID_DEMO Simple ALV Control Call Demo Program
BCALV_TREE_DEMO Demo for ALV tree control
BCALV_TREE_SIMPLE_DEMO
BC_ALV_DEMO_HTML_D0100
OOPs:
Check this for basic concepts of OOPS
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/abap/abap%20code%20samples/abap%20objects/abap%20code%20sample%20to%20learn%20basic%20concept%20of%20object-oriented%20programming.doc
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/abap/abap%20code%20samples/alv%20grid/abap%20code%20sample%20to%20display%20data%20in%20alv%20grid%20using%20object%20oriented%20programming.doc
Tabstrip
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/abap/abap%20code%20samples/alv%20grid/abap%20code%20sample%20for%20tab%20strip%20in%20alv.pdf
Editable ALV
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/abap/abap%20code%20samples/alv%20grid/abap%20code%20sample%20to%20edit%20alv%20grid.doc
Tree
http://www.sapdevelopment.co.uk/reporting/alv/alvtree/alvtree_usrint.htm
General Tutorial for OOPS
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/abap/an%20easy%20reference%20for%20alv%20grid%20control.pdf
Rewords some points if it is helpful.
Rgds,
P.Naganjana Reddy

HOW TO USE FUNCTION MODULE IN ALV

hi guyz
I developed an alv report using join statements .But i got all that fields in a function module. so how can i use function module in alv .
if i got a function module with all the fileds do i need to use select statement.
plz help me.
thanks
sudheer

Hi,
Hope the following helps..
1)
LOOP AT IT_OUTPUT.
Call the function module to get the tracking number and store the output in the
variable V_TRACKINGNO.
IT_OUTPUT-TRACKING_NO = V_TRACKINGNO.
MODIFY IT_OUTPUT TRANSPORTING TRACKING_NO.
ENDLOOP.
2) Date conversion
DATA: V_CHAR(10) VALUE '2006.11.17'.
DATA: V_DATE TYPE SYDATUM.
CONCATENATE V_CHAR(4) V_CHAR5(2) V_CHAR8(2) INTO V_DATE.
WRITE: V_DATE TO V_CHAR MM/DD/YYYY.
WRITE: / 'MM/DD/YYY Format - ', V_CHAR.
Please make sure to reward points for helpful answers..
Thanks,
Naren

Questions regarding update function module

Hello experts,
I am on customer site to help them investigate one issue: they have a background job which runs periodically.
In the report database table A is changed firstly ( new entries are inserted ), then a update function module is called via keyword CALL FUNCTION ... IN UPDATE TASK.
Inside the function module database table B is updated. ( existing entries are updated )
Customer issue:
sometimes they find A is updated as expected, however B remains unchanged at the same time.
customer could not find exact steps to reproduce the issue. However the issue does exist there and occur from time to time.
the issue could only be reproduced in their production system, but works perfectly well in dev & Q system. It is difficult to debug in their production system for trouble shooting.
After analyzing related code, I have one doubt: according to ABAP help on CALL FUNCTION aaa IN UPDATE TASK, I know the function module aaa is called in a new update work process. I wonder whether there is any possibility there this issue might be caused because the update function module fails to get called at all? ( perhaps due to heavy system load so no free update function module could serve the table B update ? )
If update function module fails to execute, is there any system utility to record this? That is to say, will it be recorded in such as SM13 or SM21?
Looking forward to your expertise on this topic!
Best regards,
Jerry

Hello friends,
Thanks a lot for your interests on this issue. I update all my findings:
1. issue background: this issue occurs in SAP CRM Channel manageement Solution, software component CRM-CHM-POS.
2. due to some limitations, the table CMSD_CI_HISTORY and history table are not updated in the same LUW. Instead the first one is updated in normal work process while the other is done in update work process. Since I am not the original developer I didn't know the whole complex scenario ( I did see this is done delibrately in note 1764006 - CMS:Sell In Release creating PB with zero available quantity ).
So for the moment we have to accept this design.
3. during our testing ,we ensure COMMIT WORK is always called.
4. So why sometimes the first table update fails, however there is no hint at all for this failure in the system like ST22 and SM21 ?? ( forget SM13, since it is updated in normal work process ).
The root cause is the flaw of SAP code below.
The code has planned to raise exception if insertion failed due to duplicate records to be inserted.
Unfortunately, the fact is if we use "INSERT db FROM TABLE xxx" to insert records into database and some record already exists with the same key, it will result in a termination but SY-SUBRC is STILL 0; Just compare it with single insertion using "INSERT db FROM <work area>", in the same error situation, processing does not terminate, and SY-SUBRC is set to 4.
As a result in this case even the insertion fails, line 29 will never be executed as sy-subrc is always 0. Since the insertion fails and the exception is caught without any notification, so customer sufferred because they do not know what has happened.
Best regards,
Jerry

Regarding for function module

Hi,
i need to display one pop up . from this pop up i need to select one value. any one help me on this one.
which function module i have to use?(Note : i need to pass internal table to the pop up after that i have to select one value from this pop up..)

Hello Srinath,
You can use tableview or alv grid on screen and call that screen loading data into it.
Also, need to register DOUBLE_CLICK event and USER_COMMAND event for handling the value selection in alv grid.
Follow the link for more details on [working with ALV grid and event handling|http://help.sap.com/saphelp_47x200/helpdata/en/0a/b5530cd30911d2b467006094192fe3/frameset.htm].
Hope this helps!
Thanks,
Augustin.

Help regarding the Function Module GUID_CREATE

Hi Experts,
Can some one explain the functionality of GUID_CREATE function module.Thanks in advance.
With regards,
Srini...

Hello,
Guid for unique identification assigned list
It think it will generate the one unique key in the program.
DATA: con_log_guid TYPE guid_16.
CALL FUNCTION 'GUID_CREATE'
IMPORTING
ev_guid_16 = con_log_guid.
WRITE con_log_guid .
Try this example it is generating a 16number id.

Regarding The Function Module SXMS_ASYNC_EXEC strucking In Queue

Dear All,
I have Written an Enhancement for standard Program MB52, I have written an Outbound Proxy and scheduled the job in background the Job is running successfully but default the the Function module SXMS_ASYNC_EXEC is also scheduled and is it showing an Error SYS-Fail.
Queue Block : Action OPEN_PSA_DATAPACKAGE/2 IS NOT SUPPORTED Iam Trying to Apply the Note Pls help me in this Regards
Regards
Naresh

Hi Amit,
if you are working with abap proxies there is an error in the proxy code that you have implemented.
Use the tcode SPROXY -> Proxy -> Test Interface (F8)
Best Regards,
Francesco

Regarding hr function modules

if to read the data from a RT table which of the following function module will be best
. pyxx_read_payroll_result or RP_FILL_WAGE_TYPE_TABLE
what i am doing is i am filling the rgdir table using the function module cu_read_rgdir
as looking at the query you can see i am totally confused in these function modules
can anone please let me know that how i can get data from rt using these function modules coz i am not using ldb PNP in my program and i have got all the data wihtout using it now the only issue left is PF that i can get only from RT TABLE.
if there is any other way also for that please let me know
the wage types for pf are /3f1,/3f2./3f3
if anynobdy can help me in this i can complete rest of the parts by today ..
sorry for disturbing you all have asked too many questions on rt table
please dont mind
just wanted to have a grip on it thats y asking so many queries and thanks for all your replies that you all have given
pelase help me in this last one also:)

Hi,
refer
Retrieve record from RT
Re: regarding RT tables
Hope this solves your purpose.
Award points if it helps.
-Gaurang

Regarding bapi function module

Hi to all,
Tell me how to test this function module
BAPI_CAR_PRVD_NUMBER_RANGE
if possible please provide any example based on this FM .
thanks and regards,
surya.

hi vishnu,
actually i don't now anything about this fm bcz of that reason only i am asking how to test this fm,what type of input required to test this fm
if u know please provide solution asap.
thanks and regards,
surya

Regarding Remote function module ARCHIV_CONNECTION_INSERT

Hi All,
Can any give me more detial about remote function module ARCHIV_CONNECTION_INSERT . So i have requirement that our client is archiving document from Commonstore. So want to create custom function module for TOA01 ( ZTOA01 ) and add a maintanance field. if data is archived maitaianance field should be flagged and next time when he is archivig document he dont want to give date. so only unflagged document should be archived.
so can any one help me how to overcome this requirement as this is urgent.
Thanks in advance.
Best Regards,
zubera

Go to SAP Service Marketplace (service.sap.com) and SAP Notes Search. Put in the note number 758278 and hit display.
However to be able to access service marketplace you need a s-user registered for the company you are working for. Please contact your basis team to find out what user is available to you.
Regards,
Michael

Regarding the function module 'REUSE_ALV_GRID_DISPLAY'

wat do these things do in 'REUSE_ALV_GRID_DISPLAY' function module and how to use them??
 IS_VARIANT =
 IT_EVENTS =
 IT_EVENT_EXIT =
 IS_PRINT =
 IS_REPREP_ID =
 I_SCREEN_START_COLUMN = 0
 I_SCREEN_START_LINE = 0
 I_SCREEN_END_COLUMN = 0
 I_SCREEN_END_LINE = 0
 I_HTML_HEIGHT_TOP = 0

Hi
See the function module Documentation,
Passing an EXIT routine indicates to the ALV that the application wants to respond to certain function codes.
Generally, these are function codes that are unknown to the ALV (that is, are not standard ALV functions) and that were defined and set by a user status.
See also the documentation on parameter I_CALLBACK_PF_STATUS_SET.
The interface of the form routine specified must be defined as follows:
FORM user_command USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield.
Parameter R_UCOMM contains the function code triggered.
Structure RS_SELFIELD contains the following information:
tabname : Name of the internal output table
tabindex : Index of the internal output table
fieldname: Field name
endsum : Cursor is located on the totals line
sumindex : If >0, the cursor is located on a subtotals line
value : Value of the field on the list
refresh : (Exporting) List should be set up again
col_stable:(Exporting) Keep column position when list is set up again
row_stable:(Exporting) Keep row position when list is set up again
exit :(Exporting) Exit list (and ALV)
before_action: Call before standard action execution
after_action : Call after standard action execution, before list setup
ignore_multi : Internal use
sel_tab_field: Internal use
The EXIT routine is called whenever a function unknown to the ALV is triggered or if the routine call before/after the execution of a standard function code has been defined by interface parameter IT_EVENT_EXIT.
See also the documentation on parameter IT_EVENT_EXIT.
The function code and the current cursor position are then passed on to the calling program through the EXIT routine.
If the user has selected multiple rows by selecting checkboxes, the output table field designated as the checkbox contains the current state of the checkbox in the list.
Top_Of_page :
If the caller specifies an EXIT routine, this routine must have the following form:
FORM top_of_page.
Module REUSE_ALV_COMMENTARY_WRITE can then be called within the EXIT routine. This module is responsible for formatting the header information and also ensures online HTML formatting. In the print preview or in batch mode, the text passed is then output in the normal format.
If module REUSE_ALV_COMMENTARY_WRITE cannot be used, you must use two parameters instead. In I_CALLBACK_TOP_OF_PAGE you pass the form routine that is responsible for normal formatting in batch mode or in the print preview mode. The form routine that is responsible for online formatting, is passed in parameter I_CALLBACK_HTML_TOP_OF_PAGE. If one of these parameters is not filled, top-of-page is not output in the respective mode.
The important parameters are :
I. Export :
i. I_callback_program : report id
ii. I_callback_pf_status_set : routine where a user can set his own pf status or change the functionality of the existing pf status
iii. I_callback_user_command : routine where the function codes are handled
iv. I_structure name : name of the dictionary table
v. Is_layout : structure to set the layout of the report
vi. It_fieldcat : internal table with the list of all fields and their attributes which are to be printed (this table can be populated automatically by the function module REUSE_ALV_FIELDCATALOG_MERGE
vii. It_events : internal table with a list of all possible events of ALV and their corresponding form names.
II. Tables :
i. t_outtab : internal table with the data to be output
REward if usefull

Regarding Smartform Function module

Hi,
When i am executing the smartform function module via print program, Smart form output is displaying properly but it is not showing any OTF data in the importing parameter JOB_OUTPUT_INFO . (JOB_OUTPUT_INFO-OTFDATA). Why it is happening? Could you please help me in this regard?

To get the OTF data you need to set the GETOTF parameter in the Control Parameters of the Smartforms.
    DATA: LS_CONTROL TYPE SSFCTRLOP. " Controlling info
    LS_CONTROL-GETOTF    = 'X'.
    CALL FUNCTION WF_FM
      EXPORTING
        CONTROL_PARAMETERS         = LS_CONTROL
     IMPORTING
        JOB_OUTPUT_INFO            = WF_OUTDATA
I guess, when we set the GETOTF flag, it will not generate the output and only puts the data JOB_OUTPUT_INFO-OTFDATA.
Regards,
Naimesh Patel

Regarding update function module

Hi all,
This is regrding update function module
How to handle errors in update function module
Can exception be used in Update function modules
while calling in update Task
if we can use please let me know how to do so while calling in Update task.
Regards,
siva chalasani.

Hi Vinod,
Just wanted to say...
your answer solved my problem.
I needed to pass my error records into a internal table and from there to notepad using GUI_DOWNLOAD.
The following is my function module....
RHPP_Q_PROFILE_WRITE
It has under TABLES-- 'err_profile' to capture error records.
So, I passed a internal table in " err_profile" to capture the errors.
And then passed this internal table in GUI_DOWNLOAD.
Regards,
Hari Kiran
Edited by: HARI KIRAN REDDY on Aug 12, 2008 12:20 PM

Regarding the function module WF_WINDOWS_EXECUTE

Can anyone tell me if the function module WF_WINDOWS_EXECUTE will work with a parameter of sap R/3 type. I mean that it works with internet sites but will it still work with the HTML pages which we design.

hi..
IMPORTING
*" PARAMETER LIKE TWFSA-PARAM
*" PROCESS_DATA LIKE WFPRCD STRUCTURE WFPRCD
*" PROCESS_ID LIKE WFPRCK STRUCTURE WFPRCK
*" EXPORTING
*" PROCESS_DATA_NEXT LIKE TWFNS2 STRUCTURE TWFNS2
*" RETURN_CODE LIKE TWFNS-RCODE
*" TABLES
*" ASSIGNMENTS STRUCTURE WFAS1
*" LOGLINES STRUCTURE TLINE
*" EXCEPTIONS
*" WF_ERROR_PROCESS
*" WF_NOTHING_DONE
Rewards point if useful
Regards
Ashu

Regarding variant function module in alv

Similar Messages

Maybe you are looking for