Regarding Workflow administrator Role

Hi All,
I need to execute the workitems which are going to some user, for this i need adminstrator role or a developer role.
Do i have to use SWIA for executing workitems which are going to some user.
To execute workitem is there any authorization required.
Thanks and Regards,
Vaibhav
Message was edited by:
Vaibhav Vijayvargiya

Check this link
http://help.sap.com/saphelp_47x200/helpdata/en/c5/e4aec8453d11d189430000e829fbbd/frameset.htm
transaction Code you can find in this link
http://help.sap.com/saphelp_47x200/helpdata/en/9b/572614f6ca11d1952e0000e82dec10/frameset.htm
This will help you.
<b>Reward points if useful and close thread if resolved</b>
Thanx
Arghadip

Similar Messages

How to determine the agent of workflow administrator

In the workflow, when there is any exception raised, we need to send notification to workflow administrator. My question, how to determine the agent of workflow administrator.

Hi jrockman li,
No it is not like that, i mean that administrator for workflow will a single person so you can simply give his userid as the agent.
As you told "YES SAP HAVE WORKFLOW ADMINISTRATOR ROLES"
SAP_BC_BMT_WFM_ADMIN Administrator for Business Workflow
SAP_BC_BMT_WFM_GP_ADMIN Role for Guided Procedure Business Workflow Administrators
SAP_BC_BMT_WFM_UWL_ADMIN UWL: Administrator for Workflow Functionality
You can use this roles for the agent determination purpose for the workflow administrators.
Thanks and Regards
Balaji K.

Workflow Administrator SAP user Role

I have a question from the customer regarding which SAP User Role should be assigned to and Workflow Administrator?
From my point of view, basically there are 2 questions here:
1. Is there any standard SAP user Role for this? (which one?)
2. If not, then a custom Role need to be configured (from PFCG t-code i think). Can anyone tell me to which workflow transactions should be ground authority for such a Role?

Hi
These are the tcode for workflow developer. Use the SW* and pfac_dis,PFTC_DIS for wflow admin.
SWL1
SWLV
SWNNOTIFDEL_DISPLAY
SWPC
SWPR
SWU0
SWU1
SWU2
SWU3
SWU4
SWU5
SWU7
SWU8
SWU9
SWUD
SWUG
SWUI_BENCHMARK
SWUI_VERIFY
SWUI_WFUNIT
SWUS
SWUS_WITH_REFERENCE
SWU_EWBTE
SWU_EWCD
SWU_EWLIS
SWU_OBUF
SWWDHEX_DEBUG
SWWERRE_DEBUG
SWW_ARCHIV
SWW_DISPSWWCLEAR
SWW_DISPSWWCOND
SWXML
S_ALR_87000710
S_ALR_87000878
S_ALR_87000881
WF_EXTSRV
RSWWERRE
SBWP
SCDO
SLG1
SWB_COND
SWDA
SWDB
SWDC_DEFINITION
SWDD
SWDD_CONFIG
SWDM
SWDS
SWE2
SWE5
SWEAD
SWEC
SWEINST
SWEL
SWELS
SWEQADM
SWEQBROWSER
SWETYPV
SWFVISU
SWF_ADM_SUSPEND
SWF_ADM_SWWWIDH
SWF_APPL_DISPLAY
SWH_EXIT_DISPLAY
SWI1
SWI11
SWI13
SWI14
SWI1_COND
SWI1_RULE
SWI2_ADM1
SWI2_ADM2
SWI2_DEAD
SWI2_DIAG
SWI2_DURA
SWI2_FREQ
SWI30
SWI5
SWI6
SWIA
MCAP
MCAQ
MCAR
MCAT
MCAU
MCAV
MCAW
MCAX
MCAY
MCAZ
MCKY
MCKZ
MCM+
MCM-
MCM/
MCM?
MCSW
MCSX
MCYY
PFAC_DIS
PFTC
PFTC_DEL
PFTC_DIS
PFWF
PFWS
PGOM
PPMS
PPO4
PPOS
PPSS
PPST
PSO3
RE_RHCHECK1
RE_RHCHECKV
RE_RHDESC10
RE_RHEXIST0
RE_RHNAVIG0
RE_RHRHAZ00
RSWEWWDHMSHOW
RSWEWWDHSHOW
RSWWCLEAR
RSWWCOND
RSWWDHEX
BSVW
MC01
MC02
MC03
MC04
MC05
MC06
MC07
MC08
MC09
MC18
MC19
MC20
MC21
MC22
MC23
MC24
MC25
MC26
MC93
MC94
MC95
MC?0
MC?1
MC?2
MC?3
MC?4
MC?5
MC?6
MC?7
MC?8
MC?9
MCAF
MCAH
MCAI
MCAJ
MCAK
MCAL
MCAM
MCAN
MCAO

Functional and Technical Administration Roles in Solution Manager

Hello
A big company has been implementing new functionality in Solution Manager during the last couple of years, they started with System Monitoring and EWA, Maintenance Optimizar, then Project Implementation, now Service Desk and ChaRM. This is company has a wide open structure in IT and a discussion has been raised about who is the owner of soluton manager in IT.
In my experience I always propose two main roles one is Technical Administrator Role and the other is Functional Administrator role. The former is more basis oriented, in charge of the installation and update of stacks in Solman, basic-initial configuration and then working mainly in setting Solutions, RFCs, System Monitoring, EWA, SAP services, OSS connections, Diagnostic, E2E Root Cause Analysis and also support in ChaRM (in setting up the transport routes, security)
On the other hand, I support a role of SolMan Functional Administrator which deals with Implemenation side, ASAP methodologies, business process definition, integration with ARIS, setting up project standards, coaching Project Managers, ensuring good application information. Also in Service Desk and ChaRM, setting the process, customizing, implementing and controlling that things are running smooth in SolMan productive.
I would like to get from you your inputs and experiences regarding how to set-up those roles, whether there are clear lines to divide responsiblities or what kind of definitions should be made.
Many thanks
Esteban Hartzstein
Director
Tebyon Consulting

As recommended by some colleagues I am also investigating Customer Center of Excelence as a reference to define roles and responsibilities, particularly in the concept of Application Lifecycle Management.
Any other input is welcome.
Regards
Esteban

Run button not appearing in 11.5.10.2 workflow administrator

Hi,
I am learning Oracle workflow on E-business suite 11.5.10.2 and very new in this.I am selecting a workflow in developer studio(under workflow administrator responsibility) and it is appearing also.But now when I want to run the workflow I am not getting any icon/button to run it.Can you please tell me where am I going wrong?

Hi,
Once you've logged in E-Business Suite, after navigating to Workflow Administrator Web (New) responsibility, are you saying that you don't see the "Run" icon which appears when you query an item type ?
If yes, check that the user / responsibility that you've logged in with is a Workflow System Administrator. You can check/set this by logging into E-Business Suite (Workflow Administrator Web (New) responsibility, Administration tab. Instead of a standalone user account, you have an option to define a responsibility as a workflow admin, in which case all users possessing that responsibility inherit admin privileges.
Regards,
Rakesh

Workflow Administrator Tcode

Hello Experts,
Can any of you help me with a workflow administrator tcode that has the ability to find all the workitem using the user ID.
Im aware of the tcodes that can be used to find the workflow status with the task - dates etc... but im not able to find any which can be used to search workflow status with the user id.
Regards,
Regi.

Hey Dilek,
Thanks for the quick reply buddy, This will not help me because this gives me the list of workitem i can see as an approver , what i need is workflow log as a requester.
If i use this and select the user id - this will show me the list of all the worklist for that user id as an approver and not as a requester, what i need is to trak the log as a requester using the logon id.
Thanks,
Regi

Administrator Role Deleted in Portal???

Hi all,
Accidentally administrator role deleted in UME.When i login j2ee_admin i deleted administrator role in UME what i do Now plz tell me. How i found administrator role ???.Because sap predefined administrator role to j2ee_admin So i am not able to working in portal in UME all button is disabled.
Help me Plz
Thanks & Regards
Kumar
Message was edited by:
Kumar

Hello,
May be you cud try out this:
First of all give the user (J2ee_Admin) SAP_J2EE_Admin group.
Now login to the usera administration of J2EE using the User with SAP_J2EE_Admin group.
Next go to useradministration and then give the user (Self) different admin roles
such as super admin, system admin, content admin etc.
Hope this helps you.
Regards,

Business Connector - Read only - Administrator role

Hi Community,
We've currently got SAP 4.8 running in our environment.
The situation is that often developers need to check the extended settings, logs, or what jobs are scheduled.
The two main roles are Developer or administrator.
The only way to get access to the web GUI admin page is to assign the administrator role.
Does anyone know how to assign a "read-only" role for the web admin page?
I would then assign this to a developer rather than give them full administrator access on business connector.
Kind Regards,
Chris

To the best of my knowledge thats not an option.
But like to hear it if otherwise.
Regards
Juan

WorkFlow Administrator access

Hi
I have a HR Leave approval workflow which has a background task that attempts to make a change to the absences infotype within the leave requestor's personnel record.
If the personnel record is locked at the point of attempting the update it fails and sends the work item to an administrator (not Workflow admin) to carry out the update manually.
Unforutnately the adminstrator's access is restricted and is subsequently unable to update the work item so the work item ends up in error in the administrators's inbox.
What is the best practice for this scenario, should the work item be sent to the Workflow administrator (assigned in trans SWDC)? Will this get round the access issue or will the Workflow administrator have same access problems when trying to manually deal with the work item?
Regards
Daniel

Hi
I have a HR Leave approval workflow which has a background task that attempts to make a change to the absences infotype within the leave requestor's personnel record.
If the personnel record is locked at the point of attempting the update it fails and sends the work item to an administrator (not Workflow admin) to carry out the update manually.
Unforutnately the adminstrator's access is restricted and is subsequently unable to update the work item so the work item ends up in error in the administrators's inbox.
What is the best practice for this scenario, should the work item be sent to the Workflow administrator (assigned in trans SWDC)? Will this get round the access issue or will the Workflow administrator have same access problems when trying to manually deal with the work item?
Regards
Daniel

Error when i try to open the Oracle content server workflow administrator

i have installed the Oracle content server 10g r3 , but when i tried to open the workflow administrator tool i got the following error message during "loading cached tables" process, although i have made all the required steps in the installation manual ; the error is
"Unable to start the application work-flow. failed to initialize . the database table list was empty using a catalog of (null) and schema 'UCMADMIN'. you may need to configure the database schema explicitly using the configuration entry databaseschmemaname "
does anyone know what might be the problem ?
Thanks
Edited by: user11120147 on Jun 22, 2010 2:22 AM

It seems that I have specified to manually create the required tables and roles during the installation steps, so I manually run the required SQL scripts which include (creating tables, creating roles, creating users , etc..), and after have successfully login to the workflow administration tool .
Regards

Portal Installation : User Administration -- Role workset error

Dear All,
We have installed EP NW04 SR1 . Every thing is working fine, All the menus are coming up properly except when i click on the User Administration --> Role --> Role menu, its starts for some time and then gives "Page cannot be displayed, Operation aborted" . This error only comes for the Role workset. Every thing else is working fine.
It would be nice if i can get guidance as to how to debug this error
Regard
PN

Hi,
I am still unable to solve the problem. The same problem persists with the ROLE and User Mapping.
I try to open it and it gives the "page cannot be displayed, operation aborted " error
Help is appreciated
Regards
PN

System Administrator role OIM 11gR2

Hi experts,
I am trying to figure out which table in OIM 11gR2 stores the information for roles assigned to the user.
I am specifically looking for users who have system administrator role assigned. The way to assign is through organizations, but not sure which table stores it.
Thanks
Kunal Jain

Below is table names and description used to obtain admin role and user information:
ADMIN_ROLE - stores information about admin roles available in system
USR - user infromation
ADMIN_ROLE_MEMBERSHIP - USer and admin role mappings
regards,
GP

How to add the Self-Service Administrator role...please guide

Hello All,
Am new in ESS/MSS. Have just uploaded the ESS/MSS business package on EP6 SP15.
Now as per the notes given on help.sap.com site on Floor Plan Manager, I need to addin a Self-Service Administrator role to use FPM.
Where can I find this......
Please guide.....
Awaiting Reply.
Thanks & Warm Regards,
Ritu

Hello All,
Am working on <b>EP 6 SP15 Sneak Preview</b>.
I need to customise Web Dynpro components of MSS...namely PCR, using Web Dynpro for Java.
Am in the process of reading the Floor Plan Manager concept from help.sap.com site...
Have 2 queries now:
1. If I use Self-Service Administrator, the business packages I need are :
- Business Package for Self Service Administraor
- Business Package for Common Parts....
but these both are for NW2004s...am using NW2004. I did not find any such pacges for NW2004....
Any inputs?
2. link http://help.sap.com/saphelp_erp2005/helpdata/en/b4/139525380149a49c8402e22700e4ba/frameset.htm says that:
Implicitly, by creating a configuration component that implements the interface IXSSAppConf. This is the only possibility for self-service applications in SAP ERP 2004 and above.
Now I need to update the UI of PCR, so how can I do it...any hints....
Please guide....
Awaiting Reply.
Thanks & Warm Regards,
Ritu

Please help me to visible the create event menu in workflow administrator.

Hi All,
please help me to visible the create event menu in workflow administrator.
(select workflow administrators responsibility navigate to administrator workflow -->
Business events-->events-->here i am seeing only search options,but i required create event,subscriptions.... )
Regards
Gopinath

Hi,
please help me to visible the create event menu in workflow administrator.
(select workflow administrators responsibility navigate to administrator workflow -->
Business events-->events-->here i am seeing only search options,but i required create event,subscriptions.... )You should find "Create Event" and "Create Events Groups" buttons in the same page under "Results : No Search Conducted".
Regards,
Hussein

No access to new default desktop without Super Administrator role

I have created new desktops and rule collections. All new rule collections are linked to in the master rule collection under folder 'Super adminstrators'.
Now when I try to log on as a normal user his new desktop is not displayed - instead an error message saying that he doesn't have access appears.
If I assign the user the Super Administrator role, then the correct new desktop is displayed.
What setting am I missing?
Henning Strand

Hi,
To fix the problem with the Portal Desktop, make sure that all users that it is assigned to have permissions to it and to every folder in the path to it (including the "End User" checkbox checked).
Check this:
Error accessing default desktop for a user
Regards,
Praveen Gudapati

Regarding Workflow administrator Role

Similar Messages

Maybe you are looking for