Regarding Workflow Book
Hai Experts,
I am new to Workflow, which book is best for learn WORKFLOW, i heard one book name Practical Work Flow-SAP Press ,this is ok for learner, or other books are there.
bye
sitaram
I second that opinion about [Practical Workflow for SAP|http://www.workflowbook.com] - and even if I had worked with workflow in SAP for more than seven years I bought a copy of this book to have as reference when I started in a new company. It's a bit like the ABAP Objects book - the other obligatory book for a developer (in my opinion)- it may not be used every month, but when needed it can save a lot of time.
Similar Messages
-
Have an issue regarding library books. My ereader is validated with Kobo account and Adobe Digital Editions account, but I get an error: 'this document is protected bij DRM and isn't available with your Adobe ID'.
same problem for me. I am using abe edition 3 as I don't think 4 can be used with kobo. Book has been downloaded to kobo but it can't be read as it is not authorised.Help please
-
Hello,
i need help regarding workflow condition..
When the Owner of the record gets changed to a specific user i want to create a set of tasks automatically created,.. is it possible using workflows, if possible what is the trigger event i have to use and what is the workflow condition.. please help me out its very urgentHi again,
i have used the following:
Trigger Event : when modified record saved
Condition : FieldValue('<Owner>') = "Jenny Adams"
and created list of actions for creating tasks.. but i think there is problem with condition.. please help me with condition.. i also tried
[<Owner>]='Jenny Adams'
[<Owner>]="Jenny Adams"
FieldValue('<Owner>') = 'Jenny Adams' -
Regarding Workflow - eApprovel mail
Hello Experts,
I am new at SAP workflow..
This is regarding Workflow issue,
before upgradation (4.6 to 6.0) means in 4.6,
prior to upgrade the eApproval mail showed the approver and the status of PO in the approval cycle like below
Vendor : vendor name
Approval log Date Status
Scott Loyet 11/01/2007 Approve
Scott Loyet Pending approval
001 Supplier Portal Support/Functional 10,000 EA 1.00 USD
now after upgradation (in 6.0)
eApproval mail message is only showing the PO number and the PO line items
At present the workflow mail does not contain the current status of the PO
means it showing like this
001 Contract Investigations 75,000 EA 1.00 USD
002 Contract Investigations 30,000 EA 1.00 USD
At present the workflow mail does not contain the current status of the PO,
can you please tell me what needs to be done and what changes to be made...in 6.0,can you please help me on thishello experts,
can you please help me on this...please...
Thanks and regards
Durga.K -
Workflow Book/Documentation for Learners
Hi Folks,
I am planning to learn Workflow on my own. Can any one suggest me the book/send me some document through which I can learn Workflow myself.
Thanks in advance.
Regards
Jaker.hi,
BOOK - Practical work flow for SAP.
Author - Rickaysen
DART
brennecke
Scneider.
this is th best one.
some helpful links.
http://help.sap.com/saphelp_erp2005/helpdata/en/fb/135962457311d189440000e829fbbd/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/c5/e4a930453d11d189430000e829fbbd/frameset.htm
Workflow
http://www.sap-img.com/workflow/sap-workflow.htm
http://help.sap.com/saphelp_47x200/helpdata/en/a5/172437130e0d09e10000009b38f839/frameset.htm
For examples on WorkFlow...check the below link..
http://help.sap.com/saphelp_47x200/helpdata/en/3d/6a9b3c874da309e10000000a114027/frameset.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PSWFL/PSWFL.pdf
http://help.sap.com/saphelp_47x200/helpdata/en/4a/dac507002f11d295340000e82dec10/frameset.htm
http://www.workflowing.com/id18.htm
http://www.e-workflow.org/
http://web.mit.edu/sapr3/dev/newdevstand.html
/people/mike.pokraka/blog/2005/07/17/sap-business-workflow-faq
rgds
anver
pls mark points if helpful -
Hi Friends,
I am an ABAPer. I am new to SAP-XI. I am thinking to buy a book on XI which should concern on integration of various business processes. I found one book named 'SAP Exchange Infrastructure: The Official Guide To Integrating Business Processes Using SAP Xi Technology' written by Jens Stumpe,Joachim Orb. Is this a good book for new techies?? or else plz suggest a good book.
Thanks in advance,
Steve.HI
Refer the below links
Welcome to XI, but before posting queries please refer to the earlier blogs/ forms for materials,
refer these links and blog in it to gain knowledge of SAP XI.
/people/sravya.talanki2/blog/2006/12/27/aspirant-to-learn-sap-xiyou-won-the-jackpot-if-you-read-this-part-iii
/people/sravya.talanki2/blog/2006/12/26/aspirant-to-learn-sap-xiyou-won-the-jackpot-if-you-read-this-part-ii
/people/sravya.talanki2/blog/2006/12/25/aspirant-to-learn-sap-xiyou-won-the-jackpot-if-you-read-this-part-i
What is XI?
http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm
What is IR and ID?
http://help.sap.com/saphelp_nw04/helpdata/en/61/fec608bc27654daadb20c1e6da7dd1/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/b9/64663c7a6c2545ae292fb26d8c33c4/content.htm
Runtime
http://help.sap.com/saphelp_nw04/helpdata/en/2e/278a8363b5ac4483dc1efc382e51df/content.htm
Good Blog for new to XI:
/people/sap.user72/blog/2005/12/22/new-to-xi
XI u2013Starter
http://help.sap.com/saphelp_nw04/helpdata/en/e1/8e51341a06084de10000009b38f83b/frameset.htm
SAP XI - Where to Find Information
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/sap%20xi%20-%20where%20to%20find%20information.pdf
All the information you need in XI :
http://help.sap.com/saphelp_nw04/helpdata/en/0f/80243b4a66ae0ce10000000a11402f/frameset.htm
Understand the Architecture of XI
http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm
You can also go through the url for Elearning :
https://www.sdn.sap.com/sdn/elearning.sdn
https://www.sdn.sap.com/irj/sdn/sdnpilot/elearning
Following is the link for 'how to guides', A step by step guide to create scenarios:
https://websmp201.sap-ag.de/nw-howtoguides
Configuration of Adapters
http://help.sap.com/saphelp_nw04/helpdata/en/0d/5ab43b274a960de10000000a114084/frameset.htm
One of the most powerful feature of XI, Business Process Management:
http://help.sap.com/saphelp_nw04/helpdata/en/3c/831620a4f1044dba38b370f77835cc/frameset.htm
How the messages are delivered through XI:
http://help.sap.com/saphelp_nw04/helpdata/en/17/50d440e14f8431e10000000a1550b0/frameset.htm
Few blogs:
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters - IDoc to File
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy - ABAP Proxy to File
/people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30 - File to JDBC
/people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy - File to ABAP Proxy
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1 - File to File Part 1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2 - File to File Part 2
/people/ravikumar.allampallam/blog/2005/06/24/convert-any-flat-file-to-any-idoc-java-mapping - Any flat file to any Idoc
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit - File to RFC
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1685 [original link is broken] [original link is broken] [original link is broken] [original link is broken] - File to Mail
/people/jayakrishnan.nair/blog/2005/06/20/dynamic-file-name-using-xi-30-sp12-part--i - Dynamic File Name Part 1
/people/jayakrishnan.nair/blog/2005/06/28/dynamic-file-namexslt-mapping-with-java-enhancement-using-xi-30-sp12-part-ii - Dynamic File Name Part 2
/people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address - Dynamic Mail Address
/people/siva.maranani/blog/2005/05/25/understanding-message-flow-in-xi - Message Flow in XI
/people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm - Walk through BPM
/people/siva.maranani/blog/2005/05/22/schedule-your-bpm - Schedule BPM
/people/sriram.vasudevan3/blog/2005/01/11/demonstrating-use-of-synchronous-asynchronous-bridge-to-integrate-synchronous-and-asynchronous-systems-using-ccbpm-in-sap-xi - Use of Synch - Asynch bridge in ccBPM
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken] [original link is broken] - Use of Synch - Asynch bridge in ccBPM
/people/michal.krawczyk2/blog/2005/08/22/xi-maintain-rfc-destinations-centrally - Maintain RFC destination centrally
/people/sravya.talanki2/blog/2005/08/18/triggering-e-mails-to-shared-folders-of-sap-is-u - Triggering Email from folder
/people/sravya.talanki2/blog/2005/08/17/outbound-idocs--work-around-using-party - Handling different partners for IDoc
/people/siva.maranani/blog/2005/08/27/modeling-integration-scenario146s-in-xi - Modeling Integration Scenario in XI
/people/michal.krawczyk2/blog/2005/08/25/xi-sending-a-message-without-the-use-of-an-adapter-not-possible - Testing of integration process
/people/michal.krawczyk2/blog/2005/05/25/xi-how-to-add-authorizations-to-repository-objects - Authorization in XI
http://help.sap.com/saphelp_nw04/helpdata/en/58/d22940cbf2195de10000000a1550b0/content.htm - Authorization in XI
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step - Alert Configuration
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide - Trouble shoot alert config
/people/sameer.shadab/blog/2005/09/21/executing-unix-shell-script-using-operating-system-command-in-xi - Call UNIX Shell Script
/people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi - Transport in XI
/people/r.eijpe/blog/2005/11/04/using-abap-xslt-extensions-for-xi-mapping - Using ABAP XSLT Extensions for XI Mapping
/people/prasad.ulagappan2/blog/2005/06/07/mail-adapter-scenarios-150-sap-exchange-infrastructure - Mail Adaptor options
/people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm - Collection of IDoc to Single File
/people/sap.user72/blog/2005/11/17/xi-controlling-access-to-sensitive-interfaces - Controlling access to Sensitive Interfaces
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14 - The same filename from a sender to a receiver file adapter - SP14
/people/prasad.illapani/blog/2005/11/14/payload-based-message-search-in-xi30-using-trex-engine - Payload Based Message Search in XI30 using Trex Engine
/people/sap.user72/blog/2005/11/24/xi-configuring-ccms-monitoring-for-xi-part-i - XI : Configuring CCMS Monitoring for XI- Part I
/people/michal.krawczyk2/blog/2005/11/23/xi-html-e-mails-from-the-receiver-mail-adapter - XI: HTML e-mails from the receiver mail adapter
/people/sap.user72/blog/2005/11/22/xi-faqs-provided-by-sap-updated - XI : FAQ's Provided by SAP
XI is the middle ware tool which is used to integrate the SAP and Non SAP system.
Purpose
SAP Exchange Infrastructure (SAP XI) enables you to implement cross-system processes. It enables you to connect systems from different vendors (non-SAP and SAP) in different versions and implemented in different programming languages (Java, ABAP, and so on) to each other. SAP Exchange Infrastructure is based on an open architecture, uses open standards (in particular those from the XML and Java environments) and offers those services that are essential in a heterogeneous and complex system landscape:
● Modeling and design of messages, transformations, and cross-component integration processes
● Configuration options for managing collaborative processes and message flow
● Runtime for message and process management
● Adapter Engine for integrating heterogeneous system components
● Central monitoring for monitoring message flow and processes
SAP XI supports internal company scenarios and cross-company scenarios.
XI has following components:
1) Design and Configuration time components http://help.sap.com/saphelp_nw04/helpdata/en/0d/5ab43b274a960de10000000a114084/frameset.htm
2) Mappings
3) Adapters
http://help.sap.com/saphelp_nw04/helpdata/en/0d/5ab43b274a960de10000000a114084/frameset.htm
4) CCBPM
http://help.sap.com/saphelp_nw04/helpdata/en/0d/5ab43b274a960de10000000a114084/frameset.htm
5) Central monitoring
http://help.sap.com/saphelp_nw04/helpdata/en/7c/14b5765255e345a9e3f044f1e9bbbf/frameset.htm
Refer all the below links for starter:
http://help.sap.com/saphelp_nw04/helpdata/en/e1/8e51341a06084de10000009b38f83b/frameset.htm
/thread/143337 [original link is broken]
XI for starters
Help in XI
Hi all, I am learning xi, any body have lifecycle document of xi projec
Regarding XI installation and Learning
1. Aspirant to learn SAP XI...You won the Jackpot if you read this!-Part I /people/sravya.talanki2/blog/2006/12/25/aspirant-to-learn-sap-xiyou-won-the-jackpot-if-you-read-this-part-i
2. Aspirant to learn SAP XI...You won the Jackpot if you read this!-Part II /people/sravya.talanki2/blog/2006/12/26/aspirant-to-learn-sap-xiyou-won-the-jackpot-if-you-read-this-part-ii
3. Aspirant to learn SAP XI...You won the Jackpot if you read this!-Part III /people/sravya.talanki2/blog/2006/12/27/aspirant-to-learn-sap-xiyou-won-the-jackpot-if-you-read-this-part-iii
https://www.sdn.sap.com/irj/sdn/xi-elearning
Apart from this Version of XI:
1) First version is XI 2.0
2) Second version XI 3.0
3) Third version is PI 7.0
4) Upcoming version is PI 7.1
Feature of PI 7.1:
SAP NetWeaver Process Integration 7.1 - Overview of New Capabilities
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/706005a3-3bd6-2910-91ae-a2016239bdcf
Usability Features in SAP NetWeaver PI 7.1 Development and Configuration Times
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a0e7734f-e969-2a10-24b6-df58a710941c
SAP Network Blog: Share User-Defined Functions in Message Mappings of PI 7.1
/people/william.li/blog/2008/01/02/sap-pi-71-mapping-enhancements-series-share-user-defined-functions
Preview on New Features of the Integration Directory in SAP NetWeaver Process Integration 7.1
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/10c0de4b-7876-2a10-e286-8412668643a8
SAP Network Blog: Mapping Enhancements in SAP NetWeaver Process Integration (PI) 7.1
/people/jin.shin/blog/2008/01/11/sap-pi-71-mapping-enhancements-series-mapping-enhancements-demo
New Business Process Engine Features in SAP NetWeaver Process Integration
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e0068bc1-6f8c-2a10-52bb-c6ee3562feb2
ESOA:
Please go through the below links, it will give you the idea about the key role of PI7.1 in E-SOA.
Enterprise Services Repository: Importance in Enterprise SOA Architecture
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/4073b4c4-7137-2a10-a5a9-abb618b7a5e7
SAP Network Blog: An in depth look at enterprise SOA
/people/franklin.herbas/blog/2007/12/10/an-in-depth-look-at-enterprise-soa
Leverage High Volume Readiness with SAP NetWeaver Process Integration
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/00982670-748c-2a10-3985-cdd42fb43e50
Most of the questions asked are scenario based questions and maximum of questions will come from mapping and adapters.ss
Integration Builder: A client-server framework for accessing and editing two stores of Shared Collaboration knowledge. It has two parts, which are fat clients to SLD where we can import the objects and use them locally. The basic reason for separating Integration Repository from Integration Directory is because by separating design time activities from configuration time activities, SAP can ship content from the Integration Repository, which each customer can implement for their specific landscape in the Integration Directory.
Integration Repository: It is used for the design and development of interface, Process and Mapping objects that are used to implement Integration Scenarios. Usually they contain static objects, which can be used for different landscapes by defining the routing rules in Integration Directory.
Integration Directory: They contain dynamic objects where in we configure scenarios using the objects from Integration Repository and route the messages between systems.
Integration Server: This component provides run time for XI. This is central processing engine of XI.
Business Process Engine: Business Process Engine enables SAP Netweaver with BPM capability by processing integration processes at runtime. BPE uses functions of the workflow engine and generates workflow from integration process at runtime.
Integration Engine: Integration engine enables processing of XML messages that are exchanged between applications in heterogeneous system landscapes. Using adapters such as IDoc, http, it can process IDocs(Intermediate documents), http requests and Remote Function Calls. It is runtime environment of SAP Exchange Infrastructure, which has the task of receiving, processing and forwarding XML messages. Processing is done with the evaluation of Collaboration agreements, by determination of receivers and execution of mapping programs.
Adapter Engine: Adapter engine is used to connect Integration Engine to SAP systems and external systems. Various types of adapters are provided to convert XML and HTTP based messages to the specific message protocol and format required by the partner systems and vice-versa. It is based on adapter framework, in turn based on SAP J2EE Engine (as part of the SAP Web Application Server) and J2EE Connector Architecture (JCA).
File Content prameters for the Receiver Adapter
http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/frameset.htm
File Content prameters for the Sender Adapter
http://help.sap.com/saphelp_nw04/helpdata/en/2c/181077dd7d6b4ea6a8029b20bf7e55/content.htm
Refer
File Receiver with Content Conversion
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
Configuring the Receiver File/FTP Adapter
http://help.sap.com/saphelp_nw04/helpdata/en/95/bb623c6369f454e10000000a114084/frameset.htm
File content conversion sites
http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/content.htm
Please see the below links for file content conversion..
/people/michal.krawczyk2/blog/2004/12/15/how-to-send-a-flat-file-with-fixed-lengths-to-xi-30-using-a-central-file-adapter - FCC
/people/michal.krawczyk2/blog/2004/12/15/how-to-send-a-flat-file-with-fixed-lengths-to-xi-30-using-a-central-file-adapter - FCC
File Content Conversion for Unequal Number of Columns
/people/jeyakumar.muthu2/blog/2005/11/29/file-content-conversion-for-unequal-number-of-columns - FCC
Content Conversion (Pattern/Random content in input file)
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file - FCC
/people/harrison.holland5/blog/2006/12/20/xi-configuration-for-mdm-integration--sample-scenario - FCC - MDM
XI in the role of a FTP
/people/shabarish.vijayakumar/blog/2006/04/03/xi-in-the-role-of-a-ftp - FCC
File to R/3 via ABAP Proxy
/people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy - FCC
/people/mickael.huchet/blog/2006/09/18/xipi-how-to-exclude-files-in-a-sender-file-adapter - EOIO - File
http://help.sap.com/saphelp_nw04/helpdata/en/ee/c9f0b4925af54cb17c454788d8e466/frameset.htm - cc
http://help.sap.com/saphelp_erp2005vp/helpdata/en/95/bb623c6369f454e10000000a114084/content.htm - fcc cOUNTER
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/da1e7c16-0c01-0010-278a-eaed5eae5a5f - conversion agent
File Content prameters for the Receiver Adapter
http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/frameset.htm
File Content prameters for the Sender Adapter
http://help.sap.com/saphelp_nw04/helpdata/en/2c/181077dd7d6b4ea6a8029b20bf7e55/content.htm
Refer
File Receiver with Content Conversion
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
Configuring the Receiver File/FTP Adapter
http://help.sap.com/saphelp_nw04/helpdata/en/95/bb623c6369f454e10000000a114084/frameset.htm
File content conversion sites
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
/people/shabarish.vijayakumar/blog/2005/08/17/nab-the-tab-file-adapter
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
/people/venkat.donela/blog/2005/06/08/how-to-send-a-flat-file-with-various-field-lengths-and-variable-substructures-to-xi-30
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
/people/shabarish.vijayakumar/blog/2005/08/17/nab-the-tab-file-adapter
/people/jeyakumar.muthu2/blog/2005/11/29/file-content-conversion-for-unequal-number-of-columns
/people/shabarish.vijayakumar/blog/2006/02/27/content-conversion-the-key-field-problem
/people/michal.krawczyk2/blog/2004/12/15/how-to-send-a-flat-file-with-fixed-lengths-to-xi-30-using-a-central-file-adapter
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/content.htm
Please see the below links for file content conversion..
/people/michal.krawczyk2/blog/2004/12/15/how-to-send-a-flat-file-with-fixed-lengths-to-xi-30-using-a-central-file-adapter - FCC
/people/michal.krawczyk2/blog/2004/12/15/how-to-send-a-flat-file-with-fixed-lengths-to-xi-30-using-a-central-file-adapter - FCC
File Content Conversion for Unequal Number of Columns
/people/jeyakumar.muthu2/blog/2005/11/29/file-content-conversion-for-unequal-number-of-columns - FCC
Content Conversion (Pattern/Random content in input file)
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file - FCC
/people/harrison.holland5/blog/2006/12/20/xi-configuration-for-mdm-integration--sample-scenario - FCC - MDM
XI in the role of a FTP
/people/shabarish.vijayakumar/blog/2006/04/03/xi-in-the-role-of-a-ftp - FCC
File to R/3 via ABAP Proxy
/people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy - FCC
/people/mickael.huchet/blog/2006/09/18/xipi-how-to-exclude-files-in-a-sender-file-adapter - EOIO - File
http://help.sap.com/saphelp_nw04/helpdata/en/ee/c9f0b4925af54cb17c454788d8e466/frameset.htm - cc
http://help.sap.com/saphelp_erp2005vp/helpdata/en/95/bb623c6369f454e10000000a114084/content.htm - fcc cOUNTER
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/da1e7c16-0c01-0010-278a-eaed5eae5a5f - conversion agent
XI3.0 Online Doc:
http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm
How-to-Guides:
https://websmp102.sap-ag.de/nw-howtoguides
Check this thread-
Learning XI
audio files on XI projects with PDF
https://www.sdn.sap.com/irj/sdn/developerareas/xi?rid=/webcontent/uuid/a680445e-0501-0010-1c94- [original link is broken]a8c4a60619f8 [original link is broken]
https://www.sdn.sap.com/irj/sdn/docs?rid=/webcontent/uuid/110ff05d-0501-0010-a19d-958247c9f798#xi [original link is broken]
basic scenarios.
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters - IDoc to File
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy - ABAP Proxy to File
/people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30 - File to JDBC
/people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy - File to ABAP Proxy
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1 - File to File Part 1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2 - File to File Part 2
/people/ravikumar.allampallam/blog/2005/06/24/convert-any-flat-file-to-any-idoc-java-mapping - Any flat file to any Idoc
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit - File to RFC
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1685 [original link is broken] [original link is broken] [original link is broken] [original link is broken] - File to Mail
/people/jayakrishnan.nair/blog/2005/06/20/dynamic-file-name-using-xi-30-sp12-part--i - Dynamic File Name Part 1
/people/jayakrishnan.nair/blog/2005/06/28/dynamic-file-namexslt-mapping-with-java-enhancement-using-xi-30-sp12-part-ii - Dynamic File Name Part 2
/people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address - Dynamic Mail Address
/people/siva.maranani/blog/2005/05/25/understanding-message-flow-in-xi - Message Flow in XI
/people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm - Walk through BPM
/people/siva.maranani/blog/2005/05/22/schedule-your-bpm - Schedule BPM
/people/sriram.vasudevan3/blog/2005/01/11/demonstrating-use-of-synchronous-asynchronous-bridge-to-integrate-synchronous-and-asynchronous-systems-using-ccbpm-in-sap-xi - Use of Synch - Asynch bridge in
ccBPM
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken] [original link is broken] - Use of Synch - Asynch bridge in
ccBPM
/people/michal.krawczyk2/blog/2005/08/22/xi-maintain-rfc-destinations-centrally - Maintain RFC destination centrally
/people/sravya.talanki2/blog/2005/08/18/triggering-e-mails-to-shared-folders-of-sap-is-u - Triggering Email from folder
/people/sravya.talanki2/blog/2005/08/17/outbound-idocs--work-around-using-party - Handling different partners for IDoc
/people/siva.maranani/blog/2005/08/27/modeling-integration-scenario146s-in-xi - Modeling Integration Scenario in XI
/people/michal.krawczyk2/blog/2005/08/25/xi-sending-a-message-without-the-use-of-an-adapter-not-possible - Testing of integration process
/people/michal.krawczyk2/blog/2005/05/25/xi-how-to-add-authorizations-to-repository-objects - Authorization in XI
http://help.sap.com/saphelp_nw04/helpdata/en/58/d22940cbf2195de10000000a1550b0/content.htm -
Authorization in XI
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step - Alert Configuration
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide - Trouble shoot alert config
/people/sameer.shadab/blog/2005/09/21/executing-unix-shell-script-using-operating-system-command-in-xi - Call UNIX Shell Script
/people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi - Transport in XI
/people/r.eijpe/blog/2005/11/04/using-abap-xslt-extensions-for-xi-mapping - Using ABAP XSLT Extensions for XI
Mapping
/people/prasad.ulagappan2/blog/2005/06/07/mail-adapter-scenarios-150-sap-exchange-infrastructure - Mail Adaptor options
/people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm - Collection of IDoc to Single File
/people/sap.user72/blog/2005/11/17/xi-controlling-access-to-sensitive-interfaces - Controlling access to Sensitive
Interfaces
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14 - The same filename from a sender to a
receiver file adapter -
SP14
/people/prasad.illapani/blog/2005/11/14/payload-based-message-search-in-xi30-using-trex-engine - Payload Based Message Search in
XI30 using Trex Engine
/people/sap.user72/blog/2005/11/24/xi-configuring-ccms-monitoring-for-xi-part-i - XI : Configuring CCMS Monitoring
for XI- Part I
/people/michal.krawczyk2/blog/2005/11/23/xi-html-e-mails-from-the-receiver-mail-adapter - XI: HTML e-mails from the receiver
mail adapter
/people/sap.user72/blog/2005/11/22/xi-faqs-provided-by-sap-updated - XI : FAQ's Provided by SAP
/people/sravya.talanki2/blog/2006/12/25/aspirant-to-learn-sap-xiyou-won-the-jackpot-if-you-read-this-part-i
/people/sravya.talanki2/blog/2006/12/26/aspirant-to-learn-sap-xiyou-won-the-jackpot-if-you-read-this-part-ii
/people/sravya.talanki2/blog/2006/12/27/aspirant-to-learn-sap-xiyou-won-the-jackpot-if-you-read-this-part-iii
http://help.sap.com/saphelp_nw04/helpdata/en/80/8e3841e26cef23e10000000a155106/frameset.htm
https://www.sdn.sap.com/irj/sdn/developerareas/xi?rid=/webcontent/uuid/a680445e-0501-0010-1c94- [original link is broken]
a8c4a60619f8
cheers -
hi,
Which book is good for workflow? I am in intermediate level.
I need agent assignment,rule creation, binding,multiline,macros, Delegation etc..,
planning to buy "SAP-PRESS Practical workflow for SAP"
Suggestions plz???Hello,
That is a very good book.
Also see if you can get your hand on the SAP course material for BIT 600 and 601.[give me your email address]
There is loads of information on the forums too.
Regards,
Satish -
Hello All,
I have a requirement to design a workflow for payment for a purchase order like while the finance people release a amount for purchase based on the amount it should take the approval from the concerned person and should allow the purchase order to b released .
Can u pls help me in defining workflow for the same or u can suggest any documents on tht.
Thanks,
Sunny<a href="http://www.mindtree.com/clt/cs_ranbaxy.html">see if this helps</a>
<a href="http://iris.tennessee.edu/Blueprint/Workflow/Workflow.doc">also this one</a>
regards,
srinivas -
Regarding Workflow mailer error
Hi
Could anyone teach me how to troubleshooting these errors in log of mailer?
My customer made mailer available through OAM and could send notification.
However, a lot of errors were found in log of mailer.
Quote
[Nov 7, 2011 8:33:55 PM JST]:1320665635770:-1:-1:svdbdc006:10.140.102.13:-1:-1:1:20420:SYSADMIN(0):-1:Thread[BES Dispatch Thread,5,main]:10.140.102.13:73020:1320665633553:10:EXCEPTION:[SVC-GSM-WFALSNRSVC-133833 : oracle.apps.fnd.cp.gsc.SvcComponentContainer.onBusinessEvent(BusinessEvent)]:Successfully handled component event, oracle.apps.fnd.cp.gsc.SvcComponent.start, for component 10011
[Nov 7, 2011 8:33:54 PM JST]:1320665634490:-1:-1:svdbdc006:10.140.102.13:-1:-1:1:20420:SYSADMIN(0):-1:Thread[inboundThreadGroup1,5,inboundThreadGroup]:10.140.102.13:73020:1320665634490:11:ERROR:[SVC-GSM-WFALSNRSVC-133833-10005 : oracle.apps.fnd.wf.bes.AgentListenerProcessor.read()]:10consecutive errors occurred
[Nov 7, 2011 8:33:57 PM JST]:1320665637002:-1:-1:svdbdc006:10.140.102.13:-1:-1:1:20420:SYSADMIN(0):-1:Thread[inboundThreadGroup1,5,inboundThreadGroup]:10.140.102.13:73020:1320665634490:11:ERROR:[SVC-GSM-WFALSNRSVC-133833-10005 : oracle.apps.fnd.cp.gsc.Processor.performError(ProcessorException)]:Maximum number of errors have occurred for this processing thread.
<af type="tenured" id="106" timestamp="Nov 07 20:33:58 2011" intervalms="3796.734">
<minimum requested_bytes="98320" />
<time exclusiveaccessms="0.032" meanexclusiveaccessms="0.032" threads="0" lastthreadtid="0x3225CB00" />
<refs soft="399" weak="183" phantom="0" dynamicSoftReferenceThreshold="9" maxSoftReferenceThreshold="32" />
<tenured freebytes="0" totalbytes="18192896" percent="0" >
<soa freebytes="0" totalbytes="18192896" percent="0" />
<loa freebytes="0" totalbytes="0" percent="0" />
</tenured>
<gc type="global" id="106" totalid="106" intervalms="3796.788">
<expansion type="tenured" amount="3553280" newsize="21746176" timetaken="0.000" reason="insufficient free space following gc" />
<finalization objectsqueued="27" />
<timesms mark="22.192" sweep="0.514" compact="0.000" total="23.115" />
<tenured freebytes="6622496" totalbytes="21746176" percent="30" >
<soa freebytes="6405408" totalbytes="21529088" percent="29" />
<loa freebytes="217088" totalbytes="217088" percent="100" />
</tenured>
</gc>
<tenured freebytes="6524176" totalbytes="21746176" percent="30" >
<soa freebytes="6383376" totalbytes="21605376" percent="29" />
<loa freebytes="140800" totalbytes="140800" percent="100" />
</tenured>
<refs soft="214" weak="167" phantom="0" dynamicSoftReferenceThreshold="9" maxSoftReferenceThreshold="32" />
<time totalms="23.241" />
</af>
[Nov 7, 2011 8:34:29 PM JST]:1320665669022:-1:-1:svdbdc006:10.140.102.13:-1:-1:1:20420:SYSADMIN(0):-1:Thread[ComponentMonitor,5,main]:10.140.102.13:73020:1320665606034:1:EXCEPTION:[SVC-GSM-WFALSNRSVC-133833 : oracle.apps.fnd.cp.gsc.SvcComponentMonitor.startAutomaticComponents()]:Starting automatic component 10005
[Nov 7, 2011 8:34:36 PM JST]:1320665676474:-1:-1:svdbdc006:10.140.102.13:-1:-1:1:20420:SYSADMIN(0):-1:Thread[BES Dispatch Thread,5,main]:10.140.102.13:73020:1320665676474:12:EXCEPTION:[SVC-GSM-WFALSNRSVC-133833 : oracle.apps.fnd.cp.gsc.SvcComponentContainer.onBusinessEvent(BusinessEvent)]:(BusinessEvent{name=oracle.apps.fnd.cp.gsc.SvcComponent.start, key=SVC:07-NOV-2011, priority=50, correlationId=null, sendDate=Mon Nov 07 20:34:29 JST 2011, receiveDate=null, From Agent: , To Agent: , Last Subscription= , Error Message=null, Error Stack=null, CONTAINER_TYPE=GSM, CONTAINER_PROCESS_ID=133833, COMPONENT_ID=10005, [email protected], BES_PAYLOAD_OBJECT=false})
[Nov 7, 2011 8:34:46 PM JST]:1320665686481:-1:-1:svdbdc006:10.140.102.13:-1:-1:1:20420:SYSADMIN(0):-1:Thread[BES Dispatch Thread,5,main]:10.140.102.13:73020:1320665676474:12:EXCEPTION:[SVC-GSM-WFALSNRSVC-133833 : oracle.apps.fnd.cp.gsc.SvcComponentContainer.handleComponentEvent(int, String, String)]:Successfully retrieved component details from the database
[Nov 7, 2011 8:34:46 PM JST]:1320665686614:-1:-1:svdbdc006:10.140.102.13:-1:-1:1:20420:SYSADMIN(0):-1:Thread[BES Dispatch Thread,5,main]:10.140.102.13:73020:1320665676474:12:EXCEPTION:[SVC-GSM-WFALSNRSVC-133833 : oracle.apps.fnd.cp.gsc.SvcComponentContainer.onBusinessEvent(BusinessEvent)]:Successfully handled component event, oracle.apps.fnd.cp.gsc.SvcComponent.start, for component 10005
[Nov 7, 2011 8:34:46 PM JST]:1320665686772:-1:-1:svdbdc006:10.140.102.13:-1:-1:1:20420:SYSADMIN(0):-1:Thread[inboundThreadGroup1,5,inboundThreadGroup]:10.140.102.13:73020:1320665686772:13:ERROR:[SVC-GSM-WFALSNRSVC-133833-10005 : oracle.apps.fnd.wf.bes.AgentListenerProcessor.read()]:10consecutive errors occurred
[Nov 7, 2011 8:34:46 PM JST]:1320665686812:-1:-1:svdbdc006:10.140.102.13:-1:-1:1:20420:SYSADMIN(0):-1:Thread[inboundThreadGroup1,5,inboundThreadGroup]:10.140.102.13:73020:1320665686772:13:ERROR:[SVC-GSM-WFALSNRSVC-133833-10005 : oracle.apps.fnd.cp.gsc.Processor.performError(ProcessorException)]:Maximum number of errors have occurred for this processing thread.
[Nov 7, 2011 8:35:29 PM JST]:1320665729053:-1:-1:svdbdc006:10.140.102.13:-1:-1:1:20420:SYSADMIN(0):-1:Thread[ComponentMonitor,5,main]:10.140.102.13:73020:1320665606034:1:EXCEPTION:[SVC-GSM-WFALSNRSVC-133833 : oracle.apps.fnd.cp.gsc.SvcComponentMonitor.startAutomaticComponents()]:Starting automatic component 10005
<af type="tenured" id="107" timestamp="Nov 07 20:35:36 2011" intervalms="98237.510">
<minimum requested_bytes="98320" />
<time exclusiveaccessms="0.024" meanexclusiveaccessms="0.024" threads="0" lastthreadtid="0x330E6900" />
<refs soft="483" weak="329" phantom="0" dynamicSoftReferenceThreshold="9" maxSoftReferenceThreshold="32" />
<tenured freebytes="0" totalbytes="21746176" percent="0" >
<soa freebytes="0" totalbytes="21605376" percent="0" />
<loa freebytes="0" totalbytes="140800" percent="0" />
</tenured>
<gc type="global" id="107" totalid="107" intervalms="98237.593">
<expansion type="tenured" amount="1048576" newsize="22794752" timetaken="0.000" reason="insufficient free space following gc" />
<finalization objectsqueued="25" />
<timesms mark="20.137" sweep="0.800" compact="0.000" total="21.178" />
<tenured freebytes="6998816" totalbytes="22794752" percent="30" >
<soa freebytes="6623520" totalbytes="22419456" percent="29" />
<loa freebytes="375296" totalbytes="375296" percent="100" />
</tenured>
</gc>
<tenured freebytes="6900496" totalbytes="22794752" percent="30" >
<soa freebytes="6671632" totalbytes="22565888" percent="29" />
<loa freebytes="228864" totalbytes="228864" percent="100" />
</tenured>
<refs soft="215" weak="169" phantom="0" dynamicSoftReferenceThreshold="9" maxSoftReferenceThreshold="32" />
<time totalms="21.265" />
</af>
I have checked the below notes,but I'm not clear.
761434.1 Workflow Mailer fails to star : Maximum Number Of Errors (100) Have Been Reached : WebSession.isSessionRecreated
333017.1 OWF.G Mailer just started dumping a OutOfMemoryError
Please teach me what's the meaning of errors and what we should deal with them.
Best Regards
LiyingPlease post the details of the application release, database version and OS.
Please see these docs.
Java.Lang.Outofmemoryerror On Large Inbound XML Message [ID 560680.1]
Intermittently Notification Emails are not Received [ID 1315344.1]
OWF.G Mailer just started dumping a OutOfMemoryError [ID 333017.1]
Output Post Processor is Down With Error "Insufficient Free Space Following GC" [ID 885607.1]
Thanks,
Hussein -
Help regarding workflow triggering
hi
i am working on WLI using weblogic 8.1
i have designed very simple workflow using some simple nodes.
as given in the tutorial i am able to run my workflow using test browser.
.its pefectly working.
i would like to know the ways of triggering the workflow from java clients.
Is subscribing to message broker is the only way or we have some other simpler
ways?
thanxThats correct for Weblogic Integration 7.0 and before but in Weblogic
Integration 8.1 there is no default queue with the name
"com.bea.wli.bpm.EventQueue" configured. Weblogic Platform 7.0 uses the
Message Oriented Middleware (MOM) aproach and Weblogic Platform 8.1 uses the
Service Oriented Architecture (SOA).
There is a good article about Weblogic Workshop Internals on dev2dev [1] and
in the documentation there is a page about writing clients for web services
[2] (in Weblogic Platform 8.1 workflows are web services).
If you create your workflow with Weblogic Workshop then you can access the
workflow over the URL
http://yourhost:7001/yourApplication/processes/yourProcess.jpd with SOAP. In
the test browser under the overview tab you can generate a WSDL, a Java
Control, a Service Broker Control and a Java Proxy (which needs the Proxy
Support Jar). With this components you can access your workflow. If you
wanna see the SOAP message use the test browser there is the html form which
uses http for triggering the workflow, for example:
<table cellspacing=0 cellpadding=0 border=0 width="100%">
<form NAME="placeOrder"
METHOD="POST"
ACTION=http://localhost:7001/AvitekWeb/processes/orderProcessing/placeOrder.
jpd>
<tr><td colspan=2 class=methname><A
NAME="placeOrder"></A>placeOrder</td></tr>
<tr><td colspan=2 class=methdesc><!-- do comments
correctly --><!--docString--></td></tr>
<tr>
<td class=namcol><nobr><b>SOAP body:</b> </nobr></td>
<td class=inpcol>
<TEXTAREA class="xmlbox" name=".SOAPMESSAGE" COLS=50 ROWS=10 ><placeOrder
xmlns="http://www.openuri.org/"
xmlns:eval="http://www.beasys.com/evalguide">
<eval:Order>
<eval:CustomerID>3</eval:CustomerID>
<eval:OrderPriority>string</eval:OrderPriority>
<eval:CustomerType>string</eval:CustomerType>
<eval:LineItems>
<!--1 or more repetitions:-->
<eval:Item>
<eval:Name>string</eval:Name>
<eval:SKU>3</eval:SKU>
<eval:Description>string</eval:Description>
<eval:Price>1.5E2</eval:Price>
<eval:Quantity>3</eval:Quantity>
</eval:Item>
</eval:LineItems>
<eval:OrderID>3</eval:OrderID>
<eval:TotalAmount>1.051732E7</eval:TotalAmount>
<eval:OrderDate>2008-09-29</eval:OrderDate>
<eval:OrderStatus>string</eval:OrderStatus>
</eval:Order>
</placeOrder>
</TEXTAREA></td></tr>
<tr><td><img alt="" height=6 width=0
src="http://localhost:7001/AvitekWeb/processes/orderProcessing/placeOrder.jp
d?.RESOURCE=blank.gif">
</td></tr><tr><td> </td><td class=inpcol><input TYPE=submit
class=inpbut VALUE="placeOrder"> starts a conversation<input TYPE=HIDDEN
NAME=.EXPLOREOVERRIDE value=".TESTXML"><input TYPE=hidden NAME=.EXPLORE
VALUE=.INVOKE><INPUT TYPE=hidden NAME=.CONVERSATIONID VALUE=_ID_><INPUT
TYPE=HIDDEN NAME=".CONVPHASE" VALUE=".START"><p></td></tr></form>
I think in this code is all what you need to start a workflow.
mfg
Daniel
[1] http://www.dev2dev.com/products/wlworkshop81/articles/wlw_internals.jsp
[2] http://e-docs.bea.com/wls/docs81/webserv/client.html
"Raj" <[email protected]> schrieb im Newsbeitrag
news:[email protected]...
>
Hi Swati,
You can write JMS program to post an XML to a Queue and configure thestart node
to event.The Quename for this client program should be"com.bea.wli.bpm.EventQueue",
else you have to configure an MDB listener. Let me know if you havefurther doubts....
>
Regards
Raj
"swati" <[email protected]> wrote:
hi
i am working on WLI using weblogic 8.1
i have designed very simple workflow using some simple nodes.
as given in the tutorial i am able to run my workflow using test browser.
.its pefectly working.
i would like to know the ways of triggering the workflow from java
clients.
Is subscribing to message broker is the only way or we have some other
simpler
ways?
thanx -
Regarding workflow suspension(entry in table SWP_SUSPEN)
Hi Experts,
I have a workflow whose one of the workitem goes into enqueue error during it's processing when user tries to perform some parallel activity , now when user stops the parallel activity & come back to his inbox, it allows him to process the workitem properly. (That is workitem is successfully processed.....status is completed). But after this workitem execution, the workflow hangs / gets suspended. Step histroy of this workitem shows there was an error when processing this workitem (Enqueue error) even though finally user was able to continuue & process the workitem successfully & status is completed too. It creates an entry in table SWP_SUSPEN With workflow Workitem ID & workitem id of the workitem under this workflow & error type as "0001" i.e:- Enqueue error callback to workflow) & status of the workflow as "1" ...i.e: - "In Process " & not in error.
I also analyzed that once the entry in the table SWP_SUSPEN is removed or gets deleted, the workflow continues from the point where it stucked.
So what i wanted to know is, what this entry in SWP_SUSPEN means by indicating "Error type" as 0001 & Status as "1" . & how this entry gets deleted, i thought there is some background JOB RSSWERRE that does this but when i checked i found RSSWERRE only checks for items in SWP_SUSPEN with workflow statuses as "02" i.e:- In error. where as my workflow has status "1" in SWP_SUSPEN under status field (as mentioned above)which means "In Process" I also found that this entry is getting deleted after sometime, so there must be some background job that is doing it, so i wanted to know what is that background Job if not RSSWERRE.
Regards,
Chetan.Hi,
This is what i got from one of the Notes:
ou use parallel processing where you have a fork with 2 branches (1
Branch necessary for completion). In one branch is a dialog activity
step and in the other is a 'Wait for Event' step. While the dialog
step is being executed by a user the Wait for Event step receives its
event and continues along the branch and completes the fork (Remember
only 1 branch needed for completion). Once the end of fork is reached
the dialog work item should be set to status Logically Deleted but
this does not occur due to the lock/enqueue on the work item while the
user is executing it. Since a callback is essential for a workflow to
continue running, this callback is suspended (stored in the SWP_SUSPEN
table). These callbacks are started again via the RSWWERRE report. If
you have not scheduled report RSWWERRE then the work items will remain
in table SWP_SUSPEN and the work items will not receive their callback
and will therefor will not continue.
If there are examples of work items hanging then check table SWP_SUSPEN to
see if the callback work item ID is there. If it is then make sure you have
the RSWWERRE job running in order to redeliver it. If RSWWERRE is running
and the entry is not being delivered then please check for notes using the
search term "RSWWERRE" and "SWP_SUSPEN". If there is no entry in
SWP_SUSPEN, then check the workflow definition to see if the work item is
asynchronous i.e. needs a terminating event as in Example 1 above. Check
the event queue via transaction SWEQADM to see if the terminating event is
being buffered there. If it is then it should automatically be redelivered
so do a notes search in relation to the event queue.
Regards
Gautam
Edited by: gautam maini on Aug 3, 2011 4:16 PM -
Regarding workflow organization structure
hi Gurs.
How to create Organization Structure, Create Workflow with Multiple Approval based on Organization Structure.
this is my requirement i dont no how to create organization structure in which tcode i have to build and what all steps.
pl help me.
Regards
vijayHi,
Your thread has had no response since it's creation over
2 weeks ago, therefore, I recommend that you either:
- Rephrase the question.
- Provide additional Information to prompt a response.
- Close the thread if the answer is already known.
Thank you for your compliance in this regard.
Kind regards,
Siobhan -
Hi,
Can any one suggest the solution to get the workflow items in the portal UWL.
I had configured the UWL and I am able to get the mails of the documents in the inbox of SAP. But I am not able to get the workflow items. Even I had maintained the task in SWFVISU.
Regards,
NarendraHi,
The UWL has to be configured in the portal side also.Please refer the below link for the same.
http://help.sap.com/saphelp_nw70/helpdata/en/39/a1bb5c4c0d4ab4a417e87ef35f1efa/frameset.htm
Thanks,
Smita Das. -
Regarding workflow organizational unit
Hi,
I have FM SWI_GET_USERS_OF_ORG_UNIT passing some oranizational unit number of the production system which was not there in devlopment server. I am testing in development server now to work the workflow I need to chnage the number to developemnt server organizational unit number. How to find that number.
thanks,
Kishore B AHey Shaurya,
I had gone thru tht link and already got answer as -
"This addition specifies which selection screen is called. dynnr is a data object that must contain the screen number of a selection screen defined in the called program when the SUBMIT statement is called.
u2022 If the addition USING SELECTION-SCREEN is omitted or the screen number 1000 is entered, the standard selection screen is called. If no standard selection screen is defined in the called program, no selection screen is called.
u2022 If a screen number that is not 1000 is entered in the addition USING SELECTION-SCREEN, the corresponding independent selection screen is called. If no selection screen with this screen number is defined in the called program, this leads to an untreatable exception."
==========
But now my query is ....as by writing this code ...report is getting executed directly...ok...
Can u suggest if there is any possibility of calling the t-code 'RE_RHAKTI00' with 3 values before execution...coz there r also other check boxes and radiobuttons which user will select as per requirement before executing the report.
Regards
Nitin -
REGARDING WORKFLOW SETTINGS FOR ELM
HI FRIENDS,
I URGENTLY NEED TO KNOW WHAT ARE THE WORKFLOW SETTINGS REQUIRED TO MAKE ELM WORK. I HAVE DEFINED THE TASK WS14000029 AS 'GENERAL TASK' IN T-CODE 'OOCU' BUT NOW I AM GETTING DUMPS WHEN I TRY TO SAVE THE LIST . THE ERROR ANALYSIS IS GIVEN BELOW.
Error analysis
Short text of error message:
Unable to read RFC destination WORKFLOW_LOCAL_010
Long text of error message:
Technical information about the message:
Message class....... "SWF_RUN"
Number.............. 617
Variable 1.......... "WORKFLOW_LOCAL_010"
Variable 2.......... "RFC_READ_DESTINATION_TYPE"
Variable 3.......... "DESTINATION_NOT_EXIST"
Variable 4.......... " "
PLEASE HELP,
THANKS,
JAIhi
you need not change the settings of the ELM workflow
you just need to activate it and plcae it as general
regarding you error
RFC destination WORKFLOW_LOCAL_010
just ask your basis guy to maintain this destination in SWU3
your dump will be resolved
see these are standard worflows ,you need not change the settings in normal circumstances
best regards
ashish
Maybe you are looking for
-
How to move items from one list to other
hi all, in jsp page i have twolist boxes. i want to move item from one list to other list on click of add or move button. can u plz suggest me an answer for the above. thank u Regards sangeet
-
I read that the drivers for this printer come with Leopard. However, when I go to system preferences, print and fax, add a printer, it doesn't see the printer. I have also read that the printer works better when i use the drivers that came with leopa
-
When putting radio programs together, I'm adding .wav files to .mp3 files in the multitrack view in Audition 3.0 and they sound fine to start with. When I export the file to mp3 and listen to it in the edit view the .wav spots that I added sound dis
-
Hi, I want to know how to maintain number ranges for WBS elements. Tcode:SNUM and the object is PRPS. we have 2 ranges 01---- 001-099 02---- 100-199 At present 01 is being used but want to change it to 02.How to do it. T
-
Class not returning all Values of Array
When I send an array with two elements to this class: public class DrawingList { public String[] dwglist; public DrawingList(String[] list) { this.dwglist = list; public String[] getDwgList() { return this.dwglist;