Regarding YTD and MTD

Hi Experts,
Could you please any one can explain what is YTD, MTD, and TTD and how to calculate them. Is there any documentation for this?
Please provide me......
Thanks in Advance
Ravi

Hello Sai,
YTD - Year to date - is a cumulative sum of that wage type in that year till that date.
MTD - Month to date - is a cumulative sum of that wage type in that month till that date.
TTD - Total to date - is a cumulative sum of that wage type in all time periods till that date. (Not 100% sure with TTD though - please verify)
The SAP help portal would have the documentation for these.
Thanks.

Similar Messages

YTD and MTD

HI experts,
I have to design a open hub and the requirement sheet only gives couple of field, which i can relate with DSO on which I am building my Open Hub but for amount, it says amount in two fields as:
MTD amount,
and YTD amount.
But in DSO the field it will be get mapped is Amount in Document currency.
Please help how to achive these two field.

Hi Rajiv,
YTD and MTD means: Year to Date and Month to Date.
You need to write some user exits to get the YTD and MTD for the amount.
With Regards,
Ravi Kanth

Step to calculate YTD and MTD in OBIEE

Hi Experts
I need to calculate YTD and MTD in OBIEE reports. Please tell me the steps how can i calculate .
Thanks in advance
Regards
Frnds

Hi..
Sorry to say this, i am unable to write steps,
but go through these links.. hope you can understand, if any problem occurs then post here.. we will check
http://www.rittmanmead.com/2007/04/30/obi-ee-time-dimensions-and-time-series-calculations/
http://oraclebizint.wordpress.com/2007/11/15/oracle-bi-ee-101332-understanding-todate-and-ago-achieving-mago-qago-and-yago/
http://oraclebizint.wordpress.com/2007/11/05/oracle-bi-ee-101332-understanding-todate-and-ago-achieving-ytd-qtd-and-mtd/
If you have any problem after doing these (i mean if any errors), then follow these...
http://siebel.ittoolbox.com/groups/technical-functional/siebel-analytics-l/time-series-functions-in-obiee-please-asap-1654886
http://siebel.ittoolbox.com/groups/technical-functional/siebel-analytics-l/help-with-todate-and-ago-time-series-functions-in-obiee-2347570
Thanks & Regards
Kishore Guggilla

Prior Year YTD and MTD Sales Figure

Hi,
I am working on a report where I need to YTD and MTD figure for current and previous year:-
I have followed following steps for current year MTD and YTD figures:-
Create 3 Date variables for Sales on Date with manual input, MTD and YTD on Date characetristics with Customer Exit input. After that I created 3 RKF where I restricted Sales value by each of these date variables.
Now my question is, Do I need to create two more variables for Prior year MTD and YTD figures with customer exit and then create two more RKF's wherein I will restrict Sales figure with respective variable.
Is that correct?
Regards

Hi,
you can eighter use the -365 preset but i suggest creating 2 seerate variables to avoid problems.
regards
Ashwin

YTD and MTD for different scenarios

Hello,
i'm looking for a possibility to upload actual figures as YTD value and Forecast figures as MTD value.
The point is that i don't want to have another dimension to defferentiate between two ways of data input (we have already 12 dimensions :-( )
Does anyone have any idea how to solve my problem.
any suggestions are highly appreciated.
Many thanks,
Ilias

There are a number of ways this could be done, but it will depend on what the users/requesters want to forecast against. For example (simple example), it could be added to an "account" dimension, but if they want to see MTD and YTD against balances then that will not work.

How to create YTD and MTD reports using Sql Server 2008 r2 report builder 3.0

Hi All,
How can I create YTD report from the below data. please help me
ProdA     ProdB     ProdC     Month    Year
10       50        40          January     2012
Data for full Year i.e. from Jan - December 2012
50      90      100        January       2013
Data for full Year i.e. from Jan - December 2013
90      40         30        January        2014
Data for full Year i.e. from Jan - Till Date 2014
MercuryMan

You can use a correlated subquery to calculate YTD in query behind. You can use APPLY operator for that
so something like
SELECT *
FROM Table t1
CROSS APPLY (SELECT SUM(ProdA) AS TotA,SM(prodB) AS TotB,SUM(prodC) AS TotC
FROM Table
WHERE Year = t.Year)t1
And show TotA,TotB and TotC in the required total row
Another method is to add required totals in SSRS by clicking on relevant group and choosing Add Total option
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

How to do YTD and MTD

Hi all,
Can anyone please explain me how to get the sum of the value of measure till the current date?
FOr ex jan value is 100, feb it is 200 etc now if date of today is slected all should be summed up and shown in the table view.
I tried running sum but its different as it does running sum for the months selected in the prompt.
Regards
Ashish

Hi
Use time-series related metrics created in rpd then make them use in front-end
http://www.rittmanmead.com/2007/04/obi-ee-time-dimensions-and-time-series-calculations/

Ytd , qtd and mtd

Hi All,
I am facing the problem when creating the ytd,qtd and mtd . I have 3 levels in my period dim table like year , quarter and month. I have a doubt on which leve i have specify the Chronology key.
In this dim table i have a composite primary key on two columns . Those are year and monthkey. How can i define to the lowest level .
Pls advise me , I would be very thank ful to you.

In my period dim they have taken year and monthkey is the primary key. That's why we call it as a composite primar key. right.
But here i am confusing shall i take these two column in the lowest level of hierachy or not
I am getting the quaters for all the years the same result.
Pls advise me

Can one Crystal Report could contian Current Month, YTD and ITD data?

Hi,
I am trying to build a crystal report and be able to show data in summarized format on single report containing data for the current month, year to date and Inception to date.
The difficulty that I find is the date ranges. Current month date range is different from YTD and ITD date.
what would be the best way to show such data on crystal report? is there a sample report available that can help me to produce such report?
your help will be highly appreciated, thanks!
regards,
Mansoor

Hey Joe,
if you have CRXI, take a look at the sample reports
Record Selection on Date Range has some good examples
you can do this with multiple Groups
create a formula
in to currentdate
( this group will cover your inception date to currentdate)
second group will be a date group also, select year as your print by option for this group.
3rd group also by date,
select month.
add fields to your details section, select the field, right click and select summary location,
(add to all groups)
you can then supress footers and headers as needed.
Hope this helps.

YTD and and previous year to date as variables

HI All,
If your cube doesn't have YTD and and previous year to date as variables to use - can these be created?
Regards J

Hi,
Yes it can be staged in cube but you need to write routine and transformation/update rule level.
If you need for some query requirement then you may achieve the same at query level. For this you need to create some Restricted Key figures by restricting your key figure with Calyear/month as per your need.
Query level approcah will be much easier then the cube level.
I hope it will help.
Thanks,
S

YTD,QTD & MTD values for variable under 0CALMONTH

Hi Gurus,
I need to calculate YTD,QTD & MTD values for a KF based on the value that the user enters in the variable under 0CALMONTH.
I have the code for how it can be done using 0CALDAY but not sure for 0CALMONTH.
Can you share the ABAP code for this requirement.
Your help will be greatly appreciated.
Thanks
Arvind

Hi,
Based on the month entered by the user, take First day of the month in teh exit,
1. YTD : Take SY-DATUM and calculate YTD
2. QTD : Based on the Month you calculate Quarter
3. MTD : Take SY-DATUM and calculate MTD
*Note: * If they give only Month want to date meanes, only SY-DATUM will be accepeted, because they are not passing 0CALDAY
Thanks
Reddy

How to Apply YTM and MTD filter to the Query Calculating "Total Sales" Amt

Hi,
I got the requirement to calculate "Total Sales" amount in following format,
1. Calculate Total Sales YTM per Country
2. Calculate Total Sales MTD per Country
I am done with Queries to get Country wise Total Sales amount but stuck at the point, how to apply YTM (Year to Month) and MTD (Month to Date) filter. Can anyone have idea about how to apply YTM and MTD filter to query??
Regards,
Priyanka

Hi,
I got the requirement to calculate "Total Sales" amount in following format,
1. Calculate Total Sales YTM per Country
2. Calculate Total Sales MTD per Country
I am done with Queries to get Country wise Total Sales amount but stuck at the point, how to apply YTM (Year to Month) and MTD (Month to Date) filter. Can anyone have idea about how to apply YTM and MTD filter to query??
Regards,
Priyanka

YTD and Delivered Variables

Can anyone give their experience and advice on the below questions.
We need to see data, ie sales, regarding YTD. We want to publish these reports via Information Broadcasting. So we have to utilize exit variables that can calculate the range without user intervention.
For example, if we are dealing with Fiscal Year/Period there is 0FYTCFP (Cumulated up to current fiscal year/period). This variable denotes an interval from period 1 of the current fiscal year to the current fiscal year period.
If we use this variable, essentially all we have to do is activate this variable and include it in the query definition (filter)? Can someone verify this for me?
Another example is if we are dealing with Calendar Month then there is 0CYTCM (Cumulated up to current month). This variable denotes an interval from month 1 of the current calendar year to the current calendar month.
In this case, would you do the same as mentioned above for activating and placing in query definition?
Thank you

Hi Mark,
You are correct. Once the variables have been activated, you can drag the relevant char into the query definition (filter, free chars or rows - as per reqt) and restrict them with the variable.
Hope this helps...

The "always allow" button is grayed out in settings regarding cookies, and I can not find where to change the setting. (Restrictions are not on.)

The "always allow" button is grayed out in settings regarding cookies, and I can not find where to change the setting. (Restrictions are not on.) Do you know where I go to change the setting to allow me to "always allow" cookies?

Hi lisaarnett111,
If you are having issues turning on Always Allow for cookies in Safari on your iPad, you may want to check to make sure that you don't have Private Browsing enabled, as noted in the following article:
Turn Private Browsing on or off on your iPhone, iPad, or iPod touch - Apple Support
Regards,
- Brenden

Question regarding selectOneMenu and PROCESS_VALIDATIONS(3) phase

Hi im a bit lost regarding selectOneMenu and how validation phase all works together.
The thing is that i have a simple selectOneMenu
<h:form id="SearchForm">
     <h:panelGrid columns="3" border="0">
          <h:outputLabel id="caseTypeText" value="#{msg.searchCaseCaseType}" for="caseType" />
          <h:selectOneMenu id="caseType" value="#{searchCaseBean.caseType}" style="width: 200px;" binding="#{searchCaseBean.caseTypeSelect}">
               <f:selectItem itemValue="" itemLabel="#{msg.CommonTextAll}" />
               <f:selectItems value="#{searchCaseBean.caseTypes}" />
          </h:selectOneMenu>
          <h:message for="caseType" styleClass="errorMessage" />
          <h:panelGroup />
          <h:panelGroup />
          <h:commandButton action="#{searchCaseBean.actionSearch}" value="#{msg.buttonSearch}" />
     </h:panelGrid>
</h:form>Now when i hit submit button i can see that the bean method searchCaseBean.caseTypes (used in the <f:selectItems> tag) is executed in the PROCESS_VALIDATIONS(3) phase. How come? I dont whant this method to be executed in phase 3, only in phase 6.
If i add the this in the method if (FacesContext.getCurrentInstance().getRenderResponse())
public List<SelectItem> getStepStatuses(){
     List<CaseStep> caseSteps = new ArrayList<CaseStep>();
     if (FacesContext.getCurrentInstance().getRenderResponse()) {
          caseSteps = getCaseService().getCaseStep(value);
     List<SelectItem> selectItems = new ArrayList<SelectItem>(caseSteps.size());
     for(int i=0; i < caseSteps.size(); i++){
          CaseStep step = caseSteps.get(i);
          String stepStatus = step.getStatus() + "_" + step.getSubStatus();
          selectItems.add(new SelectItem(stepStatus, step.getShortName()));
     return selectItems;
} Now i get a validation error (javax.faces.component.UISelectOne.INVALID) for the select field and only phase1, phase2, phase 3 and phase 6 is executed.
Im lost?

I see. Many thanxs BalusC. Im using your blog very often, and its very helpfull for me.
I changed now to use the constructor load method instead. But know im getting problem of calling my service layer (Spring service bean). Its seems they havent been init when jsf bean is calling its constructor.
Can i init the spring service bean from the faces-config file?
JSF Bean
    public SearchCaseBean() {
          super();
                //caseService need to be init
          if(getCaseService() == null){
               setCaseService((CaseService)getWebApplicationContextBean("caseService"));
          fillCaseTypeSelectItems();
          fillCaseStatusSelectItems();
.....faces-config
<managed-bean>
          <managed-bean-name>searchCaseBean</managed-bean-name>
          <managed-bean-class>portal.web.SearchCaseBean</managed-bean-class>
          <managed-bean-scope>request</managed-bean-scope>
          <managed-property>
               <property-name>caseService</property-name>
               <value>#{caseService}</value>
          </managed-property>
     </managed-bean>

Regarding YTD and MTD

Similar Messages

Maybe you are looking for