Regarding ZPWEIGHT is not appering in TS when it is mapped with source fld

HAI
I have data in oracle tables.
I have one InfoObject(or field) ZPWEIGHT(kf of type number) which contains weight.
I have another InfoObject(or field) ZPUNIT(characteristic of type char)which contains Unites of ZPWEIGHT.
While im trying to load master data attribute , i mapped these two infoobjects in transfer rules.
Then im getting ZPUNIT in transfer structure.But im not getting ZPWEIGHT in Transfer Structure .
why im not getting ZPWEIGHT in transfer structure.
pls tell me
i ll assing the points
bye
rizwan

Hi Rizwan,
I am assuming that ypu are loading master data attribute, it is for an Characteristic InfoObject and the mentioned 2 fields are its attributes. In that case make sure that these objects have been added as attributes to the main InfoObject.
Please note that you will not be able to load data into a KF InfoObject in the same manner like Charactertic InfoObjects.
Thanks,
Srini

Similar Messages

Music not appearing on iphone when i sync it with iTunes

music not appearing on iphone when i sync it with iTunes, even when I authorise computer. it just keeps saying i need to authorise my computer, which i keep doing. please help

Problem solved! authorised my computer with an other itunes id

0GR_VAL_PD KF has not mapped with source in 0Pur_C01 but value comes

HI All
I have problem with 0GR_VAL_PD kf in 0PUR_C01 cube. 0GR_VAL_PD KF has not mapped with source in 0Pur_C01 but in report level, value is coming for purchase organisation,material group .
But GR value as at posting date (0GR_VAL_PD)value not coming for particular material group or purch. org. but some days before, values were coming for particular material group or purch. org..
so need your help.
Thanks n Regards,
Gaurav Sekhri
Edited by: gaurav sekhri on Aug 18, 2010 11:41 AM
Edited by: gaurav sekhri on Aug 18, 2010 11:43 AM

Hi Susan
Which datasource you are using at present. Normally 0PUR_C01 gets loaded from 2LIS_02_ITM and 2LIS_02_SCL. The keyfigure that you have mentioned will come from 2LIS_02_SCL with the code that you have written.
The code that you have written should work. Please check if the code is in the transformation from 2LIS_02_SCL.
Share the details on why do you think the solution didn't work.
Regards
Karthik

Source table not taken as S_order_item_xa when i generate map...urgent

When i check generated result in owb it not showing source table name as s_order_item_xa.its taking as group name instead.i have specified group name as XA for CHAR_val column.
It should show "s_order_item_xa"."CHAR_VAL instead of "XA"."CHAR_VAL"/*
can anyone tell me where i went wrong immedietely.
Generated code in owb
"S_ORDER_ITEM"."STATUS_CD"/* EXPRESSION.OUTGRP1.ROOTSTATUS */ "ROOTSTATUS",
"S_ORDER"."X_BT_SUB_STATUS_CD"/* EXPRESSION.OUTGRP1.O_SUBSTATUS */ "O_SUBSTATUS",
"S_ORDER_ITEM"."X_BT_SUB_STATUS_CD"/* EXPRESSION.OUTGRP1.ROOTSUBSTATUS */ "ROOTSUBSTATUS",
EXPRESSION.OUTGRP1.OUT_ROOTSTATUSOVERALL */ "OUT_ROOTSTATUSOVERALL",
"XA"."CHAR_VAL"/* EXPRESSION.OUTGRP1.OUT_CHAR_VAL */ "OUT_CHAR_VAL",
"S_ORDER_ITEM"."ACTION_CD"/* EXPRESSION.OUTGRP1.ROOTACTION */ "ROOTACTION",
"S_ORDER"."X_BT_DLR_CHANNEL"/* EXPRESSION.OUTGRP1.O_DLR_CHANNEL */ "O_DLR_CHANNEL",
regards
SIRI
Edited by: user11923932 on Sep 21, 2009 1:41 AM
Edited by: user11923932 on Sep 21, 2009 1:47 AM
Edited by: user11923932 on Sep 21, 2009 1:48 AM

Siri,
You didnt in essence do anything wrong, but when you bring an attribute into an expression from a table and give the group it is in a name the group name becomes an alias for the table. If you still want it to read "s_order_item_xa"."CHAR_VAL just name the group " "S_ORDER_ITEM_XA" instead of "XA".
Regards,
Shaun

Text not readable in TextField when it's disabled with Plug-in 1.5.0_11

We have an Applet application which we are running with Java Plug-in 1.5.0_11. We have Grey back ground for all the pages. When the text fields are in editable mode the text color is in black. When they are in non editable mode the text color changes to opaque green (with grey background page color) which is hard to read.
The same application with Java Plug-in 1.4.2_13 did not had this color problem. When text fields were disabled they appeared as dark grey which was easy to read.
We are using
import javax.swing.JTextField;
Is it a bug in newer Java Plug-in? Is there a work around for this?
Thanks for any help and suggestions

Michael,
Thanks for your replay. It worked. I have one more question.
In version 1.4.2_13 the disabled text field's back ground was Grey and in the newer 1.5.0_11 it's white. It confuses the users if the field is editable since editable field's back ground is White. Is there a property to set Disabled text fields background color? I looked in the API but could not fine one.
I do have around 150 text fields in 9 tab pages which will be disabled at various times depending up on the requirements. Which is the best way to set this test color? Do I need to go to each text field and set this property? Is there any other way to set this property at once for all text fields.
Any suggestions and help is greatly appreciated.
Thanks,
Amsha

My new iphone 4 does not have any sound when recording a video with the camera app. Does anyone know how to fix this?

I just got a new white iphone 4. When I try to take a video using the camera app, there is only a muffled sound. I never had this problem with my old iphone. I tried to restore it and that didn't help. I checked over all of the settings. Does anyone know how to fix this?? Thanks for any help you can offer!

There is a good possibility that your trimming of the SIM card could have damaged it some way. If the SIM was working in the old phone, then you cut it and the first new phone didn't work and now this phone doesn't work, it leads me to believe it has to do with the SIM card or the account. You are sure there is no problem with the account. Did you check with the provider when you got the iPhone 4 to make sure there was no problem with the account when you could not send or receive SMS? Why can't you just get a micro-sim? The iPhone should have come with one when you purchased it.The iPhone 4 is designed for a micro-sim. I don't believe this is a hardware problem unless the phone has been hacked or modified in some manner.

MMS not working in iPhone4S when installing config profile with APN

When we use the iPhone Configuration Utility (either the latest version or previous versions) to create a config profile with APN info, then install the profile to an iPhone4S, we noticed that MMS (multimedia messaging) was no longer working. This means we could not send or receive MMS messages. And this is MMS going over the MMS protocol (and not iMessage). We had not seen this before. We routinely do config profiles with APN info and have done for all iPhone models and iOS version before the new iPhone4S. Never had a problem with MMS or anything else. This is for iPhone4S devices in the AT&T network. It is easy to reproduce and you don't need an enterprise APN for that. In fact just a config profile with AT&T's APN settings will still break MMS when installed (other than the MMS, everything else works fine).
It does not appear an iOS 5 issue. iPhone4 (or iPhone3GS) with iOS 5 do not have this problem. It appears to be tied to the new iPhone4S hardware. The same configuration profile (with the APN info) works fine on iPhone4 with iOS 5 (MMS works fine), but when you put the very same configuration profile to an iPhone4S, MMS quits working.
Doing a network reset does not solve the problem. Only removing the profile fixes the MMS
Any ideas, explanations or workarounds?

I called the Apple care line, and eventually got to 4th tier support, where they declared that there must be an issue with the APN I'm using, regardless of the fact that none of the iPhone 3G, 3GS', and 4's in our office are experiencing this issue while using the same APN. I guess I shouldn't be surprised about this, afterall who'd expect Apple to actually admit there's a "bug" in one of their products, especially since this is hapenning to a very small number of users on the 4S. Getting to 4th tier support was free, but to be able to talk to someone who can actually investigate this issue will cost $700.
I offered to give them access to our private APN for testing, but they were "unable to do that sort of testing". Additionally, we have tested using a public APN from AT&T (wap.cingular), and still experience the same issue.
Lastly, I did some further digging, and I think it has something to do with PDP Context 2 not getting an IP address. As a disclaimer, I have no clue what a PDP Context is, what it does, what it's for, but obviously MMS needs it. Going into field test mode on the phone will allow you to see the PDP Contexts, and is where I got this info from.
On the iPhone 4S, without an APN profile installed, the PDP Contexts are listed 0-3. These 4 contexts have values for an APN, and an IPv4 address, although context 0 and 2 are the only ones that have values in them.
When an APN profile isnt installed, MMS' can be sent, cellular internet doesn't work., the values are:
Context 0
IPv4:    ip is blank
APN:   phone (this is the default APN for the iphone 4s on att).
Context 2
IPv4:     has a valid public IP address
APN:     wap.cingular
When an APN profile is installed, MMS's can't be sent, but cellular internet does work, the values are:
Context 0:
IPv4:     Valid public IP address is present
APN:     Our enterprise APN
Context 2:
IPv4:     ip is blank.
APN:     wap.cingular
It appears that when Context 2 has an IP address, MMS' are able to be sent. One other interesting fact, on the iPhone 4, only 1 PDP Context is listed, while the 4S has 4 listed.
Hopefully this issue will be resolved in the 5.1 update, as this update contains a baseband update for the 4S, updating it from 1.0.14 to 1.2.01-1. Unfortunately I don't have access to a 5.1 beta, otherwise I'd test this my self. If anyone has access to the beta, and wants to test APN profiles/MMS send status, we'd greatly appreciate it!

Digital signature not showing in PDF when opened and printed with Preview

Not being able to find anything after searching high and low, I thought I would try my luck here: when I certify a PDF file using a visible signature in Adobe Acrobat Professional that signature does not show when I open the file in Preview or print it from Preview. Preview's Inspector information also claims that I can make changes, which I instructed Adobe not to allow.
Thanks for any feedback on this!

Try re-uploading the PDF and then updating the course. Sometimes the conversion doesn't take and the tracking doesn't apply correctly to a PDF.

Has anyone seen their iPads using your wifi non-stop, even if you are not using it, even when it's closed with the smart cover?

Lately my internet usage is up to the roof. I though somebody was hacking my wireless router so I made it super safe with lots of restrictions.
But that didn't stop the download of stuff over my wireless network. When I monitor who or what is using my wirelss, only my iPad was on, so, the moment I turn the wifi off on my ipad, the download stop. Turn it back on, it goes like crazy sucking up data off my wireless router for no reason. There is no indicator that the iPad is using the wireless yet, it is my iPad downloading things that I can't even seen, it does even with smart cover on!!!!. It's been over 50GB in only three days. I don't even have that amount of data on iCloud. This began a few days later after I upgraded my iOS to 6. But also, I'm thinking it could be an app that I installed. Or is it possible someone can use my iPad as a middle point to access my router and steal my internet. I have restored the OS on the iPad and it keeps doing it. Anyone has experienced something similar?

I'm going to guess that your battery life is also not so hot. What I suspect is happening is thatbthe pad is locked into an update loop with I cloud. As an example, if you have addresses that do not agree, the cloud back up will continue to try and correct itself, using both battery and wifi ( or cell). It may also be an app trying to uzpdate itself.
To troubleshot, try turning thigs off. If you are using the cloud, turn off all syncing and see it the problem stops. Then turn them back on, one by one, until you find the culprit. If it is an app, it may be harder to find, but the steps are the same. Turn off all notifications, and uninstall anything you added around the time the problem started.
A frequent culprit is magazine, comic, and newspaper subscriptions, that are constantly trying to update themselves.
Keep looking, you will find it.

Grab a list of the latest note for each job when/if they start with set text

How would I look only to the latest [01-JobComment].[Creation_Date] where [01-JobComment].[text] starts with the text "AB001:" for each [05-Job].[Job_ID]?
SELECT [05-Job].Job, [01-JobComment].[CREATION_DATE], Mid([01-JobComment].[TEXT],1,6) AS AB001, [05-Job].Name, [05-Job].Owner, [05-Job].Type, [01-JobComment].CREATED_BY, [01-JobComment].CREATED_BY, [05-Job].Status, [05-Job].Owner
FROM [05-Job] INNER JOIN [01-JobComment] ON [05-Job].Job = [01-JobComment].JOB_ID
WHERE ((([01-JobComment].[CREATION_DATE])>[05-Job].[AsBuiltProof]) AND ((Mid([01-JobComment].[TEXT],1,6))="AB001:"))
ORDER BY [01-JobComment].[CREATION_DATE];

I'm not sure this is what you want:
SELECT [05-Job].Job, (SELECT Max(T.CREATION_DATE) FROM [01-JobComment] AS T WHERE T.JOB_ID=[01-JobComment].JOB_ID AND Left(T.[text],6)='AB001:') AS CreationDate, Left([01-JobComment].[TEXT],6) AS AB001, [05-Job].Name, [05-Job].Owner, [05-Job].Type, [01-JobComment].CREATED_BY,
[05-Job].Status
FROM [05-Job] INNER JOIN [01-JobComment] ON [05-Job].Job = [01-JobComment].JOB_ID
WHERE [01-JobComment].[CREATION_DATE]>[05-Job].[AsBuiltProof] AND Left([01-JobComment].[TEXT],6)="AB001:"
ORDER BY [01-JobComment].[CREATION_DATE];
Regards, Hans Vogelaar (http://www.eileenslounge.com)

Query not refreshing all data when run in workbook with other queries

All,
I have the following problem. I have a workbook that has two queries, one on each tab.
The specific thing I notice that the company code is not showing up in the query at first until I hit refresh. Both queries use the same company code and user variables. When running the workbook I have each query set to "refresh query when running workbook". I have been able to duplicate this problem in either of the two queries, depending upon which company code variables I use. When I run the workbook, one of the two queries never updates company code variable unless I "refresh" the query directly after pulling up the workbook.
I have changed the company code variable and used other company codes in each query, some required, some not, but ultimately a few of the key figures are not populating with current data and the company code is missing...unless I hit refresh on that query. I have tried creating new workbooks and removing and reinserting the queries, but this doesn't work either.
And both queries run fine when executed alone.
Again, Both queries use the same company code variable.
Any help will be rewarded with points and is appreciated.

Tasha,
Remove the queries from the workbook and reinsert them. This should show the desired result.

404 Error (not found) for webfragment when running from OEPE (split source)

For a large project, we are developing several JSF modules as JARs which then become packaged inside a single WARs WEB-INF/lib, which in turn will be the only substantial part of an EAR.
When I build with maven / run from command line, everything works fine.
But when I run from OEPE using the split source structure (actually also when I run from command-line using the split source structure that OEPE has generated), all the JSF in the JARs are not found anymore, and I get a 404 Error in the browser.
I can reproduce the problem with a minimal set of almost-empty Eclipse projects (one WebFragment, one WAR, and an autogenerated EAR).
(too bad I can't attach it here)
The generated .beabuild.txt is as follows:
C\:/workspaces/weblogicear/WebFragmentWAR/WebContent = WebFragmentWAR.war
C\:/workspaces/weblogicear/WebFragmentWAR/build/weboutput = WebFragmentWAR.war
C\:/workspaces/weblogicear/WebFragmentWAR/build/classes = WebFragmentWAR.war/WEB-INF/classes
C\:/workspaces/weblogicear/WebFragment/bin = WebFragmentWAR.war/WEB-INF/lib/WebFragment.jar
Under WebFragment/bin/META-INF/resources I have an index.xhtml, which is not found by Weblogic's implementation of ExternalContext.
See also this thread (without answer): When web apps/war published via OEPE I get '404 Not found' on access I don't know if the original poster had the same problem. I tried to reply there, but my reply doesn't show up.

> The Testing Server Folder is:
D:\Inetpub\wwwroot\Zero-ten\www\
> The URL prefix is:
http://localhost/zero-ten/www/
> Is that the problem?
In the testing server folder you have a CAP Z
in the URL prefix you don't have a cap.
Also, would need to know more about your testing server
(what type) if there are additional problems.

Email not in sent box when I send email with attachments in Word.

Several times, I've noticed that when I send an email with attachments in Word = .doc format, I don't find the emails in my Sent Box…Why?

Then this sounds like a problem at the receiving end. More information is needed.

Not able to deploy to register my mapping with OEM

I am new to data ware housing.Iam using oracle9i warehouse builder.I created a source,target and mapping between these two using mapping editor.Then I have generated scripts bot not able to make OEM register.When I click the button "OEM register", it give 2 error messages.
1. Specified Connection is not a valid Run time schema
2. Please Make sure OEM Client installed locally or enter correct OMS domain domain in the configuration parameter.
I know that some parameter should be set in preference dialog box but no idea how to set that.
Can anyone help regarding this.
Thanks

created a project with following structure
MyProject
----MySource (FlatFile)
----MyTarget
Created a map between these 2 and named it "MyMapping".After successfully generating code for the map, "GenerationReults[succeed]" Dialog box opened.But Deploy and Run button are disabled so I tried clicking OEM Register button to get the following error message even after setting preference values.
Please tell me how to make those buttons enabled.Is there another way.
Error--
Failed to register the jobs with OEM.: OEM Registration Failed. Please make sure you have OEM client installed locally, the Oracle Management Server is running, and you have entered correct connection information and OEM information under 'Preferences'.
Incorrect domain entered or node not discovered. Please enter correct OMS domain name in the configuration parameter and make sure that the OMS is running.
oracle.sysman.emSDK.client.omsClient.NoDomainException: singapore
Job object failed to create, check to see if user has credentials.

When using google maps with Firefox, I get a message Service error -27

All of a sudden, google maps doesn't work anymore when logged in to google and running Firefox. I get the following message:
503. That’s an error.
The service you requested is not available at this time.
Service error -27. That’s all we know.
Still works on Explorer, though.

hello, maybe try to [[Clear the cache - Delete temporary Internet files to fix common website issues|clear the cache]] & [[Delete cookies to remove the information websites have stored on your computer|cookies from google.com]] and reload the page.

Regarding ZPWEIGHT is not appering in TS when it is mapped with source fld

Similar Messages

Maybe you are looking for