Regd : Integration Between Portal Layer And Process Layer

Hi Experts,
I have a query regarding the integration between Portal layer and the process layer in CE. How does the interaction happens or what is the process behind the integration of these two layers. I was going through some help documents at help.sap.com.
But from there I could not get much of information. So need your inputs on the same.
Thanks
Pradipta Kumar Mishra

Hi Pradipta,
If you are referring to Guided Procedures as the "Process Layer", then you have one of the three options that I can think of:
1) Deliver the GP processes via UWL in CE Portal
2) Deliver the GP processes via UWL in EP (if your organization has one)
3) Delvier the GP processes via GP Runtime in CE Portal
Of the three mentioned above, option 2 is preferred since your business users get to access their tasks via a single interface. But you need a EP. If that's not the case, I would suggest Option 1. For integrating GP and UWL, please refer to following link.
http://help.sap.com/saphelp_nwce10/helpdata/en/43/ef06a7860c7061e10000000a1553f6/frameset.htm
Thanks!
- Rao

Similar Messages

OSB: The different between transportation layer and security layer

Dear All,
Do you have any idea for compare about security on service bus between transportation layer and message layer?
Which one is better? And do you have any factor to consider which one I should use?
Best REgards,

If you are working with OSB 11g, please refer -
http://download.oracle.com/docs/cd/E17904_01/doc.1111/e15866/part_sg.htm#sthref1029
Ofcourse you would like to have both of them if you want a healthy system. If your OSB services are internet facing then it is a sensible decision to have both transport (a bare minimum) & message security. If your services are exposed to a LAN/WAN then you may have either or both of them. Remember, securitiy processing is always an overhaed to the performance so should be used as and when required only.
Regards,
Anuj

Diff. between transport route and transport layer

hi gurus,
What is the Diff. between transport route and transport layer.
Regds:
BBR.

No interview questions
Read the "Rules of Engagement"
regards
Juan

What's the difference between transport route and transport layer

what's the difference between transport route and transport layer,Can somebody give me some explaination? thks in advance!

Hi,
Transport Layer in ABAP Workbench
    The Change and Transport System supports the distribution of development
    work on large projects across multiple SAP Systems.
    The packages in each development system are grouped into one transport
    layer.
    The transport layer determines whether objects are assigned to a local
    or transportable change request.
Use
    Each of your SAP development systems is assigned a transport layer as
    its standard transport layer. If you use Extended Transport Control, you
    can assign different standard transport layers to certain clients.
    You can define at the most one consolidation target for each SAP System
and transport layer.
When you create a package, it is assigned the standard transport layer
of the SAP System.
If you want to assign a different transport layer to a package, you
require the administration authorization for the Change and Transport
System.
The objects in a package automatically have the transport attributes
defined for the corresponding transport layer.
o   If a consolidation route originating in their SAP System is defined,
     then the objects are assigned to a transportable request, and
     transported into the consolidation target when it is released.
o   If a consolidation route is not defined, the objects are assigned to
     a local request, and are not transported.
Customizing settings are not assigned to a package. They have the
transport attributes of the standard transport layer of the system or
client.
It is best to assign a package a standard transport layer for which a
consolidation route originating in the development system is defined.
To display and maintain the transport layers and routes, use the
Transport Management System (transaction STMS).
Only the system adminstrator can make changes.
Caution:
     The tables TSYST, DEVL, TWSYS, TASYS are no longer productive as of
     Release 4.0A and cannot be maintained.
Regards
Ben

Anybody help on integration between IS-RETAIL and CRM application?

hello experts!!
anybody help on how is the business process (or) functionality between IS-RETAIL and CRM application?
i mean integration between IS-RETAIL and CRM application.......

Hi Subha
Since IS-Retail is an Industrial Solution package which was built above the Baseline package,all the Business processes which were there in 4.7 is supported by IS - Retail. You can access the Retail Menu in W10T and S000 for your normal Menu in ECC6..
Regards
Anis

How to capture show layer and hide layer event in photoshop through a plugin???

How to capture show layer and hide layer event in photoshop through a plugin???for mac

Use the Listener plug-in found in the SDK to see how you can monitor the show/hide layer event. You can also use the Getter plug-in to show what information you can find out about the current state of Photoshop.

Difference between connection, session and process

Hi all,
Can anyone please update me on the difference between connection,session and process.
Thanks in advance,
- Sri

I got this useful note by googled in net. It describes session,connection,process gracefully.
A connection is a physical circuit between you and the database.A connection
might be one of many types -- most popular begin DEDICATED server and SHARED
server. Zero, one or more sessions may be established over a given connection
to the database as show above with sqlplus. A process will be used by a session
to execute statements. Sometimes there is a one to one relationship between
CONNECTION->SESSION->PROCESS (eg: a normal dedicated server connection).
Sometimes there is a one to many from connection to sessions (eg: like
autotrace, one connection, two sessions, one process). A process does not have
to be dedicated to a specific connection or session however, for example when
using shared server (MTS), your SESSION will grab a process from a pool of
processes in order to execute a statement. When the call is over, that process
is released back to the pool of processes.

Integration between Soluiotn Manager and HP Quality Center

Hi Folks,
I am currently configuring the integration between Solution Manager and HP Quality Center, and during the set up of communication user, I get the following error:
User hpqc_comm is not authorized to access projects
Message no. QC_INTEGRATION016
Diagnosis
You want to access projects in the Quality Center with the communication user hpqc_comm. This causes an error because the user either does not exist in the Quality Center or is not assigned to any project.
Procedure
Check whether the user hpqc_comm is in the Quality Center, and whether it is assigned to at least one project. Ask the Quality Center administrator to create the user and assign it to projects, if necessary.
You can use another user for the communication
Well, I have created that user in HPQC and assigned it to projects.
Thanks for your help
Marco

the error is in Solution Manager. I am defining the communication parameters in SOLAR_PROJECT_ADMIN / <selected project> / edit / Connection to HP Quality Center. I choose the corresponding project in Quality Center, but when I validate the screen, I get the error I mentioned before, even though the communication user exists in HPQC and is assigned to that specific project.
Thanks for your reply.
Marco

Integration between case management and C-folder

Dear Experts ,
Can you help regarding integration between Case Managment and C-folder ???
Kind Regards

Hi,
Simple answer: There is no specific integration existing.
Case Management is using DMS as one option to save documents like Word, Excel.
The cFolders solution is normally on a separate server and DMS documents can be checked out from the content server to cFolders and vice versa in SAP standard.
I have experience from both solutions and I really don't see how these two solutions should be linked to each other from a business perspective.
Regards, Johan

Integration between Sales Order and Inventory module

Hi....
Plz tel me d ans for.........
a)Integration between Sales Order and Inventory module.
    b)Integration between Delivery and Inventory module
    c)Integration between Invoice and FI module.
Thanks

>
manoja c wrote:
> Hi....
>
> Plz tel me d ans for.........
>
> a)Integration between Sales Order and Inventory module.
>     b)Integration between Delivery and Inventory module
>     c)Integration between Invoice and FI module.
>
>
> Thanks
HI Manoja,
a) Integration between Sales Order and Inventory module.
While creating sales order due to Strategy group in MRP3 view of material master does an availability check and determines the first date of availability.
b)Integration between delivery and Inventory module.
At the time of PGI (Goods issue)
Cost of Goods Sold is debited due to configuration in OBYC GBB T-Key To Inventory Account
c)Integration between Invoice and FI module.
In account assignment(that reminds me of your previous que CONDITION TECHNIQUE is used for Account Determination as well)
Tcode VKOA
Also when Billing document is released to Accounting
Customer Account is debited for the amount in Invoice.
and credited to Sales Revenue Account
Hope this clarifies to some extent
Post for further clarification
Reward if helpful
-Abhishek

How copy a layer and its layer mask to another image?

Using PSE9, how can a copy a layer and its layer mask to another image?
The on-line help contains a topic on how to copy a layer but trying the different methods in the help topic results in either nothing being copied or just the layer without its layer mask being copied. Thanks.

How are you copying? If you float your images, so they are both partially visible in the work area, make the one with the to be copied layer active. Then drag the layer from the layers palette onto the other image. Now you should have both the layer and the mask on the second image.
Juergen

Integration between SAP HR and PS (Project System)

Hi Guys,
Is there any integration between Project System and HR in SAP. My client is service oriented company.
Every month New customers will join and each customer they call it as one project & maintain in PS. Now my client requirement is, through PS recruitment requisition should have to come to HR (For ex XYZ customer requires 2 Supervisors, 1 Manager), so that HR will recruit employees for the project.
So is there any integration between PS & HR
Regards
Prasad

Hi Vikram Patil,
In my client place we are not implementing SAP Payroll, hence if any new project is created in PS, I need only man power requirement from PS, how can I proceed now
If is there any documents on PS and HR integration please forward to my mail ID
[email protected]
Regards
Prasad

Differences Between Infopackage Groups and Process chains

Hi All,
Can anybody explain me what are the differences between Infopackage Groups and Process Chains ? And how process chains are more comfortable

hi nagarjuna,
An InfoPackage group is a collection of InfoPackages. In order to summarize data requests which logically belong together from a business point of view, and to therefore simplify the request, you can collect data requests (meaning the InfoPackages) into an InfoPackage Group. You can schedule each of these groups in the scheduler . With the data request the scheduler can access InfoPackage groups directly and thereby request more than one InfoPackage at a time, corresponding to the setting in the InfoPackage group. Thus, you can support InfoPackage groups with the serialization of your data requests.
While a process chain is a sequence of processes that wait in the background for an event. Some of these processes trigger a separate event that can start other processes in turn. hit this link to know abt PCs:
http://help.sap.com/saphelp_nw04/helpdata/en/8f/c08b3baaa59649e10000000a11402f/content.htm
Process chains are more comfortable becoz itz not like infopackages where we have to schedule each pack individually. And in PCs, monitoring is very convenient since u see evrything in a single page.
regards
sham'm

Integration between Custom list and task list

Is it advisable to provide solutions for the integration between custom list and tasks list in SharePoint?
I am working on a scenario where the data has to be segregated between multiple lists and there will be transactions among these lists using workflow. Some of the capabilities in Tasks list like due date notifications, calendar, tracking are needed
on the transaction. Since these lists are based out of different content types, is it advisable to choose these lists for solutions?
When we have to make few updates through workflow from custom list to tasks, will there be any problem in the transactions as it is two different content type?
Vijayaragavan, MCTS

Since SPLists and SharePoint workflows don't provide inherent
support for transactions, you have to handle rollback operations yourself.
The easiest way to simulate a transaction is to read in the state of any list item you are changing prior to executing an update, and then write that state back should you detect a failure. It's not a perfect solution, since a sufficiently severe error might
prevent your rollback updates as well. That's the price you pay for not having the data store support transactions.
That being said, while it's true many clients will ask for business critical data to be stored in SPLists, I would argue that it's your job to convince them that it's not a good idea, and that transactional databases accessed over webservices are a much safer
SP compatible way to store important data - from
stackoverflow
[custom.development]

Diffence between physical layer and BMM layer

Hi all,
Please let me know the difference between Physical layer design and BMM layer design. Please write your views in your reply instead of links.
regards
chandra kanth.

chandra kanth.,
Use in the layers
The physical layer is the layer of the Logical Business Model where you define the physical data model of your data source. It contains information about the physical data sources.
The most common way to create the schema in the Physical layer is by importing metadata (table, view, …) from databases and other data sources. If you import metadata, many of the properties are configured automatically based on the information gathered during the import process. You can also define other attributes of the physical data source, such as join relationships, that might not exist in the data source metadata.
In the Business Model
In the business model, OBI recommends using complex logical joins instead of foreign key logical joins.
When Complex joins are used in the business layer then they are really acting as placeholders. They allow the OBI Server to decide on which are the best joins define in the Physical Layer to satisfy the request.
In a Dimension, you may have multiple Logical Table sources that all join to one fact table. The OBI Server will then decide the best joins to use to meet the requirements.

Regd : Integration Between Portal Layer And Process Layer

Similar Messages

Maybe you are looking for