Regd: Unable to automatically find executables for simulator 'mti_se' from the following paths

Hi,
I am trying to simulate for Spartan 6 fpga in Xilinx ISE 14.7 in Ubuntu platform. But when I compile my files I am getting the error that the simulator "ModelSim" path is not specified in the directory and its not able to simulate the file. I provided the test bench too.
But still I am not able to compile.
Any information will be useful
Thanks
Sukaniyaa

if you want to run simulaion on modelsim then you have to. If you want to simulate your design using XILINX ISIM you need not have it installed.
Go to design properties and change the simulator to ISIM to run on xilinx simulator

Similar Messages

Automatic goods issue for outbound delivery, during the transfer order confirmation

Hello,
Could you please advise how to realize automatic goods issue for outbound delivery, during the transfer order confirmation in the WMS.
Now after creation of outbound delivery, i can't post the goods issue. Before i have to make the transfer order and confrim it and only after this i can post the goods issue in the VL02 t-code.
Could you please advise - what i have to customize that to make automatic GI for outb. delivery (i mean with creation material document) during the TO confrimation.
Thanks in advance.

Hi Iiya
Check the below setting, might be helpful

Where can I find the serial number for LOGIC PRO from the AppStore

Please help me:
Where can I find the serial number for LOGIC PRO from the AppStore?
I bought and downloaded the application, now it asks me for the serial number but I didn't not receive it or can find it.

My understanding is that if it was purchased throught the App Store, then there is no requirement for a serial number. At which point does it ask you for the serial?

Finding the related field for "Leave Type" from the BI content in HR modul

Hi good after-noon!!
Can any one help me out in finding the related field for "Leave Type" from the BI content in HR module?
Regards,
Suman.

Hi Suman ,
U can get the information in KTART field in PA2006 table in SAP. This field can take values like annual leave type, long service leave, study leave etc....
Regards
vamsi

Unable to release planned order for single line from MRP workbench

Hi
We are unable to release planned order for single line from MRP Planner workbench,but Select All For Release is working for all the lines for the item
User want to release a specific line but no new requisition is generated
It is highly appreciable if anyone could help to resolve this issue
Appreciate the Help
Regards
VKPK

It sounds like the release goes through in the workbench but the requisition does not show up in source - is this correct? If so I would check item attributes / flags for purchasing and buy. also have found some items require a purchase price to be populated in master and org

Abort Could not determine a value for variable 0DAT from the authorizations

Hi All,
I encountered an error '/ Abort Could not determine a value for variable 0DAT from the authorizations\' when executing my query on a multiprovider in BW 3.5.
Can anyone help me in finding a solutionn to this issue.
Thanks,
Kartik.

Hi Kartik,
I am sorry as that note is for NW2004s. Please check if 0DAT variable installed from a business content? if not then I think thats the cause of the problem.
Hope this helps,
Bye...

How can I get help for ADE downloads from the public library. I am suddenly getting error messages

How can I get help for ADE downloads from the public library. It worked for years and now I am getting error messages. I cannot find any practical help

If you are trying to open the book on a device, try using the latest DL Reader on Android and iOS
https://play.google.com/store/apps/details?id=com.datalogics.dlreader&hl=en

Can we execute a Powershell script from the Javascript?

Hi,
I have a certain requirement to add a Custom ribbon button in document library and there was a powershell script to be run for the selected item in the library.
I have struck with executing a Powershell script from the javascript function.
Can anyone please suggest me if this was achievable
Thanks, Swaroop Vuppala

Hi Swaroop,
To execute server side code in a custom ribbon button script, using application page is a common way to do this, besides, you can also use a page dialog, which is similar with application page but display as model dialog, another way is javascript
_dopostback and delegate control, the following article contains detailed information about this, please refer to it for more information:
Invoke server side code on SharePoint ribbon click:
http://sharepointnadeem.blogspot.in/2012/07/invoke-server-side-code-on-sharepoint.html
Thanks,
Qiao Wei
TechNet Community Support

Depreciation for additions to start from the following month

Hi Gurus,
Have situation in depreciation posting, When acquisition happens depreciation has to start from next period on wards (Dep not to post in Acq period) this is working fine and good. (period control maintained as 11 for Acq)
In the same way it has to apply for Additions if any happens for existing Acquisitions. Period control set as next month 11 for additions, but system making the posting in acquisition period itself including catchup of previous periods from oredinary dep starting.
I want make the system to start depreciating dep from the following period rather than acquisition period for Additions and catcup dep also post in this from Ordinary depreciation start date .
Example of Issue:
Acquisitions:
Acquisition happend in Period-01, dep started from next period "02"
This working fine.
Addiotions:
Using the above example
Addition happend in period-05, Dep started from-05 including the catch up dep of periods; 02,03,04,05.
By right the depreciation posting has to starts in the following Perios 06, has to consider Catchup amounts also.
Any help on the above are appreciated most.
Points are available
Thanks in advance,
Vyas

Hi Milosavljevic,
On the above system behaviour is right, but we have to understand like below:
What ever posted the Depreciation amount in the acquissition month it belongs to accumilation depreciation of the addition of asset ( from ordinary dep start date to untill acquissition period).These happend bcoz of catchup, the real depreciation was started from the following month onwards..
Hope this understanding made me clear...
If u able to find any thing better pla keep share..
Others plz comment on this for better understanding.
Thanks,
Vyas

CCP related: A timeout occured waiting for a response from the ECU

Hello All,
            I had just started using ECU Calibration tool kit software. Iam using USB 8473 for my application.When I tried to run the VI after loading the *.A2L file, I see an error message saying "A timeout occured waiting for a response from the ECU ". Does anyone know how to communicate with the ECU through CCP.
       Iam pretty sure that Iam using the right cable. I also checked the address of the parameters using Get property.vi what iam trying to read, wether they are matching with the address in the *.A2L file or not.They are matching. However I was able to communicate with my ECU when I use the same device to read the data over J1939 data link, based on arbitration ID's, with the Vi's from CAN Frame to Channel Conversion Library.
    Can any pls help me out how to communicate with my ECU using CAN Calibration Toolkit software.
-Lucky.

Hello,
          I am sending you an attachment of the manual for the ECU Calibration tool kit . Please go through the manual it will clarify your doubt. Moreover , check for can vi's in the example finder in labVIEW. Those will help ....
I am sending you a link which gives you some insight about the installation of CCP command set and the use of the toolkit with the USB CAN hardware.
http://digital.ni.com/softlib.nsf/websearch/D7DE248D07CAD00086256ED3004BAB8A?opendocument&node=13206...
Drivers and Updates: ECU Measurement and Calibration Toolkit 2.1
Attachments:
can manual.pdf ‏1437 KB

HT204053 My wife and I have an iphone each using one apple id. How do we stop items being deleted from one phone and then find it has been deleted from the other?

My wife and I have an iphone each using one apple id. How do we stop phone contacts being deleted from one phone and then find it has been deleted from the other?
Also this works when one of us downloads an app it appears on the other iphone

You need to use separate iCloud accounts. This will mean that you can both have your own separate contracts and calendars and put an end to them being deleted by each other.
Whether or not you have a separate iTunes account, is up to you. If you have a separate iTunes accounts you will not be able to access the music, books, apps that have been purchased by the other. This may be exactly what you want, but it also means that you both may end up purchasing the same item.

HT1725 When I click on a Movie I get the following "You have already purchased this item but it has not been downloaded. To download it, select Check For Available Downloads from the Store menu." Then get err = 11111

iTunes quit unexpectedly during the download of a movie. When I click on that movie now I get the following message: "You have already purchased this item but it has not been downloaded. To download it, select Check For Available Downloads from the Store menu."
I follow the instructions, but the download still doesn't resume - err = 11111
Any advice?

Yeah, I am going to blast my iPhone for the 4th time today and pray this goes away. I had 6 apps showing updates, the 6 badge icon shows on the App Store on my iPhone and, having run them all, the 6 apps have two copies each on my iPhone: one that is the old version of the app and will not run and the other is a faded version of the app with an empty progress bar on the icon. Click those and you get an error message about connecting to iTunes, etc. as described in the article I linked to above.
It gets stranger than this. If I install a completely NEW app, the 6 that are stuck mid-update heal themselves and appear with the new version only, however now completely different apps (Hold Em for instance - which I did not update and didn't need an update) will not launch "app name Cannot Launch" message comes up.
Agh!

Why am I still getting this message after logging in - This computer is no longer authorized for apps that are installed on the iPhone "Myron Liptzin's iPhone". Would you like to authorize this computer for items purchased from the iTunes Store?

why am I still getting this message after logging in? "This computer is no longer authorized for apps that are installed on the iPhone “*************s iPhone”. Would you like to authorize this computer for items purchased from the iTunes Store?" - after I have logged in and get the message that the computer is already authorized!!!?? - and then the above message pops up again?

Click here and follow the instructions.
(71175)

This computer is no longer authorized to play purchased items that are on the iPhone. Would you like to authorize this computer for items purchased from the iTunes Store?

My itunes on my iMac for the passed few weeks now keeps on comming with the message "This computer is no longer authorized to play purchased items that are on the iPhone. Would you like to authorize this computer for items purchased from the iTunes Store?"
or "This computer is no longer authorized to play purchased items that are on the iPad. Would you like to authorize this computer for items purchased from the iTunes Store?"
This while everything was working fine.
Please advise what I can do with this message.
When I press autorize, it comes up with a unknow appleID. When I use apple ID's that work - it comes with the message that the computer is autorized. but then the autorization message comes back.

You can't change the Apple ID that the Authorize dialog comes up with by default. It's showing you that Apple ID for a reason: it means that the items you want to play were purchased using that Apple ID and therefore you need to authorize your computer with that Apple ID. Changing the Apple ID given completely defeats the entire purpose.
If you don't know the password to the given Apple ID, then you will no longer be able to play those items.

HT1386 Hello, When trying to sync, I get the following message. This computer is no longer authorized for apps that are installed on the iPhone "Terri George's iPhone". Would you like to authorize this computer for items purchased from the iTunes Store?

while trying to sync with my iphone I recieve the message: This computer is no longer authorized for apps that are installed on the iPhone “Terri George’s iPhone”. Would you like to authorize this computer for items purchased from the iTunes Store? When I put in my password and hit authorize, I get a message telling me there was an unknown error (-50). Would love to sync today. Any help would be appreciated.

The -50 error is documented in this article:
iTunes: Specific update-and-restore error messages and advanced troubleshooting
Here is a synopsis:
Error 13, 14, 35 and 50 (or -50)
These errors are typically resolved by performing one or more of the steps listed below:
Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
Put a USB 2.0 hub between the device and the computer.
Try a different USB 30-pin dock-connector cable.
Eliminate third-party security software conflicts.
There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.
Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
Try to restore from another known-good computer and network.

Regd: Unable to automatically find executables for simulator 'mti_se' from the following paths

Similar Messages

Maybe you are looking for