Regd. Wifi connectivity nd wireless connection

Sir . I have a wifi connection at my home. And the problem is that except this laptop everyting else is getting connected to the wifi. I don't know the reason behind it but yes this is the actual case. And sir on troubleshooting the connection it says that your wireless connectivity is turned of. Sir I dont know wat to do and I am in a big dilemma. Bcz wid out this my no work can be done ...so plz luk after dis matter as early as possible and tell me the appropriate solution for it.
Thanks

Hi ,
Thank you for visiting the HP Forums! A great place where you can find solutions for your issues, with help from the community!
I came across your post about the Notebook, and wanted to assist you! I have looked into your issue about your HP G62 Notebook and having issues with the Wireless for Windows 7. Here is a link for troubleshooting the Wireless connection. If you click on start and go to device manager- Do you see the network adapter in the list? Here is a link to the HP Support Assistant. Just download and run the application and it will help with the software and drivers on your system it has built in Wireless troubleshooting assistance. Let me know how this goes. Thanks.

Similar Messages

  • Can't connect PlayBook to *my* WPA2 wifi (D-Link Wireless N Router) - very frustrated

    I'm gettting massively frustrated with this and would appreciate any assistance.
    OK, so to start I'm a developer and I've managed to use my PlayBook for months, connecting to various WiFi networks without issue... except at home.
    I have actually connected to it 100's of times, but the connection is flakey and often it fails to connect because it can't get an IP Address (my router is set to offer up 100's of them by DHCP... ONLY my PlayBook has issues getting one)
    I have thus far had no issue connecting the following devices to my router:
    Laptops (5 different brands/models),
    iPad,
    iPod (4 different devices)
    Blackberry phones (3 different models)
    iPhone (2 different models)
    but the PlayBook always seems to have issues...
    I've tried connecting using the "sync" WPS feature both by pressing the button on the router, as well as entering a PIN on the router config page - no luck.
    I've tried entering the correct password multiple times - no luck... it always fails to get an IP Address.
    I've even pre-assigned a dedicated IP Address to the MAC Address of the PlayBook... (all my other devices skip it) yet the PlayBook won't take it.
    The router is a D-Link DIR-615 H/W /ver C1, Firmware ver 3.13NA Wireless N.
    Its entirely possible that I've goofed something up, and I'm willing to try anything to resolve it - however if anyone else is having similar issues please chime in... and for anyone at RIM with 5min free... a quick "paranoia" once over look at the connecting / IP gathering code in this area would be greatly appreciated... in case there's an odd "off by 1" error of some kind in this area.
    Finally, I'm not sure if there is any more info to provide when the PlayBook does fail to get an IP... but if there is an error message or log that us users can look at (or get in an OS update) it would be helpful in trying to diagnose why the connection fails.
    Thanks for any advice,
    Steve
    PlayBook Apps: DataMine, Dots + Boxes, 5 Marbles
    BlackBerry SmartPhone Apps: 5 Marbles Soon: **** (D.Z.A), ****Quest, **** Challenge, VaultCracker, DevBrowser, Radial****

    I was having the same issue until yesterday.
    After spending a couple of nights dealing with BB Support techs, I came up with this steps and worked for me, even though that Playbook should connect automatically as other devices do. Moreover, of course I am not going to ask everyday the IT guys for a modem reset
    Here it goes :
    1- If you own a lap top/pc connected to your work Wifi network, open the network adapter window on the PC. Go to wifi adapter and left-click on properties in order to display detailed connection status.
    2- From there you may obtain a valid subnet mask, Default Gateway, Primary DNS and Secondary DNS.
    3- Since the IP Address was already obtained by your Playbook while trying to connect, it will be asking for the same IP each time, so write down the Playbook  IP too. You can access it from the wifi? Icon on the wifi configuration script on the playbook.
    (The issue here was that for some reason, my Playbook on "auto IP mode" was choosing a different default gateway number than the correct one. I still can't figure why, but I'm not going to invest more time on it, until a new software update becomes available and go from there.)
    4- In your playbook tap the wifi icon and go to saved networks, tap on edit (pencil) and delete your office previous connection.
    5- Create manually  a new wifi connection and unselect "auto IP mode". You will have the opportunity to copy all the information mentioned above. IP, Subnet Mask, Primary DNS. Secondary DNS and Default Gateway.
    6- Tap save and connect.
    Hopefully you Playbook will be online and ready to navigate.

  • Windows downloading data unnecessarily from the internet when connected to wireless (wifi connection) or USB wireless 3G connection

    Hello Team/windows Experts,
    I need help from  you people on this issue that i am facing. I tried to find out the exact reason behind this, however i am not successful on this.
    Here is the issue:
    I recently re-formatted my laptop and re-installed windows 8.1. After that, I installed only couple of software program i.e. Mozilla Firefox and installed Bit defender total security 2015 and I updated my Antivirus software. I have two ISP connections, one
    is USB 3G wireless connection and another one is a normal wired connection to which a wireless router is connected (wifi connection). 
    Now, this is what I have seen happening. The moment i connect to the 3G usb wireless connection and even if i don't open any browser or website, I see that the data is being downloaded and i can see enormous amount of data being downloaded for no reason
    and I couldn't find as to what is being downloaded to my system. One can imagine and understand 10-15 Mb downloaded in couple of minutes and the connection sitting idle and not downloading anything later is fine, but if nothing is being accessed/browsed and
    still seeing 200-300 mb data being downloaded is something to be watched for.
    The same situation was seen when i enabled my wireless connection from another ISP provider (wifi) and don't know within a minute or so 50 MB data was consumed and to see what its actually doing, i waited for another 5 -10 minutes and huge data was downloaded
    (may be another 100-200 MB).
    Now before using my internet connection, I have done the following to ensure that unnecessary data is not downloaded from both USB 3G and wifi connection:
    1. I don't run any torrents. They are absent.
    2. I disabled automatic windows update
    3. I have disabled live tiles so that consant update to the windows app tiles are off.
    4. I have turned metered connection on for both the networks.
    5. I don't download anything from internet unless very important related to my studies. I do very normal browsing.
    I am pretty sure that antivirus signatures are not more than 5 mb or so (they are even smaller in files), so they won't eat that much data. 
    If at all, I have to see what is being downloaded to my system, where can i find that detail/information?
    How should I stop this from happening as i have to watch my 3g USB stats every now and then to see if its downloading lot of data or not?
    As this is a recently formatted system, I don't see any malware/virus issues as I have my system protected. Although now software can protect the system fully, but still i haven't access/browsed any website that might cause issues to my system. However,
    this is something i am trying to find out and if you guys can help/suggest me, it would be great.
    Warm Regards,
    R Janak Sundhar

    Hello Janak,
       1. make absolutely sure windows update is disabled, for this test.
       2.  Disable windows defender etc. for this test.
       3.  go though  programs and features and remove anything that is not needed or you thing might be sucking bandwidth.
        4.  hit CTRL ALT DEL, select task manager, more details, startup tab and disable everything as a possible cause of your issue.
    See if any of this makes a difference.
    Thanks, John

  • Can iPhone be set to prefer WiFi connection over Wireless?

    If I were to choose to switch to using a smartphone - say an Iphone -- I would want to minimize my dependence on its wireless connection to use its smartphone features -- use its  wireless capabiity to support being a mobile phone and when I'm not within reach of a decent and free WiFi connection particular when I'm at home and have a very robust WiFi network (802.11n).  I would prefer to use Wifi if a connectoin is available in order to minimize how much of my data plan I need to use.  Understand that iPhone5 supports both WiFi and Wireless. Downloaded the Iphone manual and searching  on the word WiFi produced zilch.  Thanks!
    Message was edited by: charwingz

    I was just trying to make sure we were insync on the terminology so we did not miscommunicate about your question.
    With an iPhone you have a lot of means to handle information, not just the usual phone and data and WiFi, but if you have people with iPhones, or iPads, or Mac computers you can all setup accounts (free) in iCloud and communicate by iMessages that do not go through the normal cellular provider data bundle.  They use cell or WiFi and communicate with each other and the messages are not taken out of your messaging allowance.
    Also, when you have WiFi available you can use FaceTime for telecommunication with another iDevice, do that with family weekly...great way to communicate.
    There are many things you can do that minimize the cellular service charges or limits if you just keep track of how you are connecting with others.

  • Will the AirPort Express Base Station create a wifi connection that will enable me to wirelessly connect to XBOX live on my xbox 360

    will the AirPort Express Base Station create a wifi connection that will enable me to wirelessly connect to XBOX live on my xbox 360

    Yes, but not in all cases with it provide your with an "Open NAT" condition that some on-line gaming require. However, for most Xbox LIVE access, it should work just fine.

  • Want stream Netflix to blueray via Airport Express wifi. The blueray finds my wifi but the wireless connection failed - said, Ensure DHCP server is enabled on router and restart router. Don't think I have DHCP server. Suggestions anyone?

    Want to stream Netflix to blueray player via my existing Airport Express wifi. The player finds my wifi but the wireless connection fails - says, " Ensure DHCP server is enabled on router and restart router." I don't think I have a DHCP server. Suggestions anyone?

    I can't speak specifically regarding LG, but the Whole Home feature on Direct TV (record a movie on one DVR and watch it on another TV in another location) just won't work with wireless, and I have a strong fast connection at 300 Mbps. Ethernet works perfectly.
    Few audio/video products will accept "n" wireless at 5 GHz. I suspect that your LG accepts a 2.4 GHz signal, which would top out at 130 Mpbs.
    If you are trying to stream High Definition video, especially at 1080P, my opinion would be that it is unlikely that you will be able to do so reliably using wireless.
    Perhaps another user who has figured out how to do this will post with some input.

  • TS1398 Hi I run the 6.0.2 patch and I stiil have the same problem, no wifi connection even if i change the wireless antenna and the security any ideas??

    Hi I run the 6.0.2 patch and I stiil have the same problem, no wifi connection even if i change the wireless antenna and the security any ideas??

    There are two steps to the update for an iPhone 5. First you run the patch then you update the iOS. Did you do both? And does iOS 6.0.2 show up in Settings > General > About > Version
    The first thing apple will tell you to do if you bring them the phone is to reset the phone. Try that before going any further.
    First thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.

  • New imac 27(Intel based,bought 2013) slow wifi connection with my Verizon fios actiontec router. All other wireless devices in the house(ipad 3gen,MacBook Air ,hp laptop) have a much faster connection. Should I change router settings to G only,etc

    New imac 27(Intel based,bought 2013) slow wifi connection with my Verizon fios actiontec router. All other wireless devices in the house(ipad 3gen,MacBook Air ,hp laptop) have a much faster connection. Should I change router settings to G only,switch channel from auto to maybe 6,channel width to 20mhz? Already changed security settings to WPA2.  Currently router is running in mixed b and g mode.

    If you have one computer running on G they will all run on G. All ROUTERS are backward compatible, in otherwords if you have a group of computers and all of them are N compatible and one or two are G They will all work but the N computers will run at N and those that are G will run at G speed not N.
    It can get confusing but really it is simple. The newest is 802.11 AC and ic used with the newest Mac Computers made available in November 2013. So if you have the newest Airport Extreme that is 802.11ac and the newest computers that are AC compliant your speed will be 5 times faster than anything on the market right now.

  • Problems with my wifi connection after iOS6 download.

    After I made actualization for my iPad and iPhone to iOS6, I have problems with the wifi of my devices. When I use them in my room what is served with my access point, the connection interrupt after few minutes. The signal is there but I cant navigate or download nothing. But this not happend in the room where my main router is. Can you help me? I already made som changes at the devices, but it doesen't work !
    In awaiting your help.
    Regds
    Bruno Meckien

    iOS 6 Wifi Problems/Fixes
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting
    http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet
    http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • My phone is not working without a Wifi connection.

    I had to get a new cell phone because my speaker phone no longer works. Luckily my phone was still under warranty. Now my phone does not connect wirelessly unless I have a wifi connection. I never had to have a wifi connection in the past to receive and send email, connect to the internet, etc.. How do I fix this problem?

    AnufromVA wrote:
    Now my phone does not connect wirelessly unless I have a wifi connection.
    That surprises you?
    I never had to have a wifi connection in the past to receive and send email, connect to the internet, etc.
    Are you trying to say you cannot connect via your carrier's cell network?  You did remember to put the SIM in?

  • Wifi connection issues with Home Hub 5

    Hi can any body help because I am starting to get very frustrated with the Home Hub 5 and it's wireless connection.
    infinity 2 was installed at my house in the beginning of September, everything worked Ok for three weeks then for no apparent reason the hub kicked out all of my wireless devices (phones, kids iPods, tablets etc) at 6:45 one morning. When I got home from work I rang BT and was told to perform a Pin reset. This seemed to work but less tham 48 hours later at exactly the same time in the morning the hub kicked out all of my devices again, this time I just pressed the restart button on the top of the hub and everything reconnected but the Wifi range within my house had dropped. A few days later the hub kicked all my devices out again (each time it has done this the light on the hub has remained blue showing it is supposedly working OK)
    One evening this week the hub of its own accord cycled through all the colours of lights indicating problems and that it was restarting. Today at 10:15 the hub kicked all my Wifi devices out again. I have contacted BT every time this has happened and told them about the poor range of the Wifi signal.
    I do not want to be restarting/resetting my Hub every couple of weeks i need a permanent solution.
    One of the reasons I switched from TalkTalk to BT when fibre became available was the fact that the Home Hub 5 was supposed to be the best provided router by any of the networks, being the only one that is an AC class router. The thing costs £130 if you want to by one. Quite frankly the £60 TP-Link dual band router I bought when I was with TalkTalk had a better range and was more stable. I would switch back to that if I knew BT's router settings (but they like to keep that a secret)
    I really am beginning to regret switching from TalkTalk. Please someone restore my faith in BT.
    Sorry for the lengthy rant but I hope you can understand why I've ranted for so long.
    Nick

    Hi imjolly
    Sorry its taken a while to reply to your post.
    I wanted to try BT's latest attempt at a solution before i tried your idea.
    Since your reply the Home Hub 5 has dropped the Wifi connection to my devices another three times.
    The second time less than 30hours after BT's so called fix, which was to make sure the 5Ghz channel was not syncing with the 2.4Ghz channel. Tonight it went again and BT's response was to take the router out of smart channel selection and manually select channel 9,6 or 11 on 2.4Ghz and 36,40,44 or 48 on 5Ghz. Well I havent even bothered with that, if the prats at BT would look at their records they would see they have already suggested that.
    This HH5 is the most unreliable piece of garbage i have ever had the misfortune to use. WHY OH WHY did I leave TalkTalk
    I have tonight tried your solution. Fingers crossed that this works.
    Nick 

  • Issues with WiFi connection to Deskjet 3545

    Hi,
    I have number of issues with WiFi connection to my new Deskjet 3545 AIO:
    1. Printer is not able to get IP address automatically from home WiFi router (all other devices get IP with no problem). Using WPS allow printer to register in network but after switching off, WPS setting is not stored, so I have to do it again. This I was able to solve with manual entering of IP address, netwrok mask, DNS and gateway address.
    2. Official HP software installed from HP site was able to find printer for 3dattempt, and it started to work. But after a while, "HP utility" program loose connection to printer,  so I can not see any parameters, and I get "can not find printerä message when start to to print. After a some time (minutes to hours), whithout any action from my side, connection to printer seems to be restored, so I can see printer parameters in "HP utility" and printing is started.
    3.  Official HP software installed from HP site on PC (Windows 7) is not able to find printer on WiFi at all, works only with USB.
    All this is disaponinting and unexpected, as my office HP LaserJet Pro 400 Color works perfect.

    Hi @DmiBro,
    Welcome to the HP Forums!
    I see that you are having some wireless issues with your HP Deskjet 3545 to your Mac OS X 10.10 and Windows 7 computers. I am sorry to hear this, but I am happy to help!
    I would recommend the following guides:
    HP Single-Function and Multifunction Printers - 'Printer is offline' Message Displays on the Compute.... (The solutions for OS X v10.8 Mountain Lion and OS X v10.9 Mavericks will work on Mac OS X 10.19 Yosemite.)
    HP Single-Function and Multifunction Printers - 'Printer is offline' Message Displays on the Compute....
    HP ENVY 4500 and HP Deskjet Ink Advantage 3540 e-All-in-One Printer Series - Printer Does Not Mainta....
    Tips for troubleshooting wireless connection issues
    The following tips can help you troubleshoot and avoid wireless connectivity issues. You can try these tips separately or in combination to get a successful wireless signal.
    Move the printer and the computer closer to the router, but no closer than 6 ft (1.8 m). Wireless signals can be weaker at greater distances between the printer and the router.
    If you are experiencing an intermittent wireless connection, try restarting your router. Consult your router manufacturer, Internet service provider, or network administrator for instructions on how to restart the router.
    Remove any metal objects between the printer, the computer, and the router. Objects such as refrigerators, microwaves, or metal bookcases can interfere with wireless transmission.
    Move any device that emits radio signals, such as microwaves and cordless telephones, farther away from the printer. Such devices can interfere with wireless signals.
    I would also recommend this website, HP Wireless Printing Center - Troubleshooting Issues.
    Hope this information is helpful, and have a nice day!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • Use airplay with Apple TV without wifi connection

    Is it possible to use the AirPlay feature on an iPad with Apple TV without being connected to the internet via wifi? 
    I'm thinking about getting my mom an iPad for X-mas later this year so that she can help some of her visually impared students.  She has always wanted a good visual aid for all of her students and I figure that this would be the best solution.  The only problem is that I'm not sure if she would have access to the school's wifi connection. 
    I would normally suggest that she use the HDMI adapter but the projector in her classroom is mounted on the ceiling and it would be a bit of a hassle to have to disconnect the cable every time so that the kids wouldnt play with it.  So I figure if she can stream her content on her future iPad to the Apple TV wirelessly, she would be able to achieve what she has always wanted to do.  I dont think she will be streaming anything to the Apple TV like youtube or anything like that but it would be a nice tool to have in the event that she wants to present something to her kids wirelessly from her iPad.

    Unfortunately you can't send audio from the Apple TV to an airport express, but you can send audio from your mac/pc to the airport express via iTunes/Airplay, you could also send audio from an iPod/iPhone to the express. The express supports both optical and 3.5 mm in a unified port.

  • Sharing a WiFi Connection in OSX

    Lets say your in a hotel that has wifi and you have to pay $10 a day for the connection.  You don't want to have to pay $10 again for your iPad and iPhone to connect as well.
    I would like to share the WiFi connection on my MAC with other devices.  I know how to do this with two WiFi cards but can this be done with a single WiFi Card? 
    I know technicialy it is possible to do this with one card because I have see apps for Windows and even an iPhone using the Jailbroken MyFi App that used a bridge tethered mode to share a WiFi (not 3G) connection to a number of devices. 
    Anyone know of a way to do this on a MAC? 
    All the best,
    Joe

    Hi Sig,
    If only life was that simple.  The basic Mac XOS Internet Sharing will allows you to share a wired internet connection over wireless or a wireless internet connection over wire.  Or if you have two wireless cards you can share the connection on one wireless card with users onanother card.
    What I wanted to do was share the Wireless Internet connectionon the same wireless card.  It looks like you have to pick a different interface for sharing then the one your wish to share using the approach you are recommending.
    All the best,
    Joe

  • My mac wifi connection to DSL line was down when I tried to upgrade Ipad to IOS6, and it defaulted to Ipad data line and consumed my monthly allotment of data -- How can that happen as a technical matter?

    Maps did not work for me for the first week after upgrading to IOS6 on my New Ipad -- I have since learned that I exceeded my 2 gig monthly data plan and therefore I had no 4G access on my ipad, which meant Maps couldn't work while traveling.  Since I never download videos, I knew I had not knowingly downloaded that much data.  When I called AT&T, they told me that when I upgraded to IOS6 I consumed over 1 gig of data.  
    I did the upgrade while connected to my iMac, which in turn has a wireless connection to router connected to my home DSL line.   My wifi service has been spotty lately, possibly because router is defective.  So let's assume that when I tried to download IOS6 that my iMac did not have a good wifi connection.  Is the AT&T person correct that the download defaults to the Ipad's 4G cellular network, even though the iPad is connected to the iMac by USB cable?  I didn't think that was possible as a technical matter -- i.e., that the iMac gets automatic access to the iPad's connection to the cellular network.  (I'm sure I'm not explaining this right, I'm obviously not technical.)   
    Also, do you get any obvious warning or indicator on the device that you have exceeded your data limit for the month?  I sure didn't see any warning, (although I now know that I can go to Settings, then Cellular Data, then View Account and find the status of my data line account).  
    Thanks for any help on this. 

    Strange. It works fine with my setup which is no different from yours. Problem with the cable or LAN port(s)?

Maybe you are looking for