Regenerate all entries in tab InfoSource through tcode RSA1

Dear !
I am having a problem with tab InfoSource of Modeling in NW 7.0 EHP1 system through
Tcode RSA1. I have already installed a new NW 7.0 EHP1 system (new system
- no data)
My apprentice already deleted all entries in tab InfoSource of Modeling. Now tab
InfoSource empty
My apprentice already deleted following:
Nodeling -> InfoSource -> Delete Technical Content and delete all entries in Unassigned Nodes
I want to regenerate all original entries in tab InfoSource. How ?
Please help me
Thanks and best regards
Edited by: myfriend280985 on Jan 31, 2010 6:23 AM

I'm not sure if your are talking about Technical Business Content. If so it seems you have to re-activate it from Business Content.

Similar Messages

Having trouble with dreamweaver cs 6 spry tabbed panels, all content in each tab showes through like

Having trouble with dreamweaver cs 6 spry tabbed panels, all content in each tab showes through like it was all created on one page, plus mouse over doesnt work on them.
This started all of a sudden.
The entire website is a series of spry tabbed panels.
http://pacificlaser.com/const.html
if you click on General construction tab things work ok...
if you click on Machine control tab, mouse over doesnt work and all page content of each tab show through.
ive been looking for the answer for 4 months with no success.
Hope a fellow dreamwever-person can help
Thanks Rick

You called it: your links to the SpryAssets are linking to your hard drive, not to the files within the folder on the server.
Correct these links:
<script src="file:///C:/Users/work/Desktop/Sites/SpryAssets/SpryTabbedPanels.js" type="text/javascript"></script>
<link href="file:///C:/Users/work/Desktop/Sites/SpryAssets/SpryTabbedPanels.css" rel="stylesheet" type="text/css" />
And you should be good to go.
Beth
ps. If you run into more difficulties with the Spry Widgets, take your questions to the Dreamweaver Spry Forum http://forums.adobe.com/community/labs/spry, where they will get quicker attention.
B

Table entries update through tcode me21n

Hi ,i want to update the database table ekpo through the screen fields execution.
please help me with the code lines.
thanks

i am doing like this for updating the entries through tcode me21n.
IN PBO;
data: v_date type ekpo-zzpldte,
      v_code type ekpo-zzreason.
if sy-tcode = 'ME21N'
or sy-tcode = 'ME21'.
loop at screen.
    if screen-name = 'EKPO-ZZREASON'
     or screen-name = 'EKPO-ZZPLDTE'.
      screen-input = '0'.
      modify screen.
    endif.
endloop.
endif.
IN PAI:
types:ekpo.
data:it_ekpo like standard table of ekpo with header line,
     wa_ekpo like ekpo.
select * from ekpo
into corresponding fields of table it_ekpo.
loop at it_ekpo into wa_ekpo.
wa_ekpo-zzpldte = v_date.
wa_ekpo-zzreason = v_code.
modify ekpo from wa_ekpo.
endloop.
i dont know whther i am doing it correctly,
will this will give me the database updates.
please note v_date and v_code is my feilds on th screen for the user entry.
please suggest.
thanks.

Updating to v35.0.1 lost all my open tabs

I just updated to version 35.0.1, as suggested, and restarted. When FF reopened, all my open tabs -- 200 of them -- were gone. Sometimes problems like this resolve with a second restart, and I did that. No help. History -> Recently Closed Windows had only two minor entries. Keeping perspective, I won't call this a catastrophe; I reserve that for things like my home burning down. But it's a big loss. Some of what was open, I'll remember and find again. Most of it, I won't. I'll start looking through History, but some of these tabs have been open for a long time and I'll have to go back a long way, and look at many many tabs that I closed between then and now, to find the ones that were open before I did the update.
Can anyone suggest anything else I might try? I do a daily backup of my system drive. Are there FF files I could recover from backup that would bring back whatever tabs were open then.
I'd also like to know if anyone else had this problem.

I did some more research and recovered my tabs. But questions remain, and if this happens again I'd like to know as much as possible about it. I'd be grateful to anyone who can answer them.
This article led me toward the fix: https://support.mozilla.org/en-US/questions/1023996 . It gives these instructions:
o go to C:\Users\username\AppData\Roaming\Mozilla\Firefox\Profiles\somerandomnumber
o rightclick on sessionstore.js
o properties
o previous versions
o restore the version before you crashed
I found that directory but sessionstore.js wasn't there. Three other files whose names begin with sessionstore -- sessionstore-1.js, sessionstore.bak, and sessionstore.bak-20140923175406 -- were no help because they were, respectively, empty (0 bytes) and last updated in 2012, last updated on 2014-10-28, and last updated on 2014-09-24.
But also in the directory <somerandomnumber> is the subdirectory sessionstore-backups. It contains several files, the most recent one being upgrade.js-20150122214805. The time stamp in the file name is odd because it doesn't match the Properties information, which says it was created today, about the time I did the FF upgrade. But since the Properties info seemed right, I viewed the file with WordPad and it *was* the list of my open tabs just before I upgraded.
So I thought the fix was to close FF, copy upgrade.js-20150122214805, paste it into the <somerandomnumber> directory, rename it sessionstore.js, and restart FF. I closed FF, but as it closed, sessionstore.js appeared in the <somerandomnumber> directory. That was puzzling, but I viewed it, and it was the list of tabs I'd opened since upgrading and losing my old set of tabs. I couldn't restore a previous version because I don't have versioning enabled. So I saved that version of sessionstore.js under another name and created a new sessionstore.js as I described. I restarted FF, and glory be, my old tabs were back.
I watched the <somerandomnumber> directory again as FF restarted, and as it did, sessionstore.js disappeared again. To see if that behavior repeated, I exited FF, and as it closed, sessionstore.js reappeared. I opened FF again, and sessionstore.js disappeared again. Apparently FF moves that file somewhere else while it's running.
So my problem is fixed but several questions remain. I hope FF staff or someone with deep knowledge of FF can answer them.
1) Why did I lose my tabs during the upgrade to 35.0.1? Was it just me, just a fluke? Or has it also happened to others who upgraded to 35.0.1?
2) What created the three other sessionstore* files in the <somerandomnumber> directory? I'm pretty sure I didn't, and whatever did create them apparently doesn't do so consistently and in any case stopped doing so three months ago.
3) If those aren't the backups of sessionstore.js, where do those live? I've had plenty of FF crashes and System Restore has brought them back almost every time. Clearly they're stored somewhere.
4) What does FF do with sessionstore.js while it's running?
5) Why is the timestamp in 'upgrade.js-20150122214805' several days off the actual creation date and time correctly listed in Properties?

Administrative Limit Exceeded - DSCC Entry Management Tab

DS 6.3.1
When performing searches in the DSCC under the Entry Management tab I am getting an error that says Administrative Limit Exceeded. I know this is being caused by the global searchlimit and/or lookthroughlimt settings. I can set those to unlimited to resolve the issue but I don't want to open those values up to all users. I also know that I can set these same limits on a per entry basis by adding the nssizelimit and nslookthroughlimit attributes with -1 values to the particular user's entry.
In the DSCC however, the user that is binding to my DS instance and performing the searches is: cn=admin,cn=Administrators,cn=dscc
This user exists in the DSCC registry, not my DS instance. I assume it can BIND to my DS instance via the Pass Through Authentication plugin. I have tried setting both the nssizelimt and nslookthroughlimit attributes to -1 in that user's entry in the DSCC registry but it doesn't work like it does when I set those to an entry that exists in my DS instance. I'm guessing the Pass Through Authentication plugin doesn't look for those attributes and/or doesn't return them to my DS instance.
Is there a way to set the sizelimit and lookthrough limits for "cn=admin,cn=Administrators,cn=dscc" so I don't get the error in the DSCC and where I don't have to open up those limits globally? Is there a best practice for this other than telling me that the Entry Management tab is not the best place to be doing such tasks? I'm aware of that but this is actually for a customer who desires to use the Entry Management section to search for and periodically manage his entries.
Thanks in advance.

The behaviour you're observing is documented in a bug. Unfortunately it's not implemented since the 5.2 days and not targeted for 7.0 either. You could create a local admin user and assign rights, or use a tool like "Apache Directory Studio" and log in as directory manager.
4534340 reslimit should provide interface for chaining and PTA plugin

Performance Issue in Select Statement (For All Entries)

Hello,
I have a report where i have two select statement
First Select Statement:
Select A B C P Q R
     from T1 into Table it_t1
          where ....
Internal Table it_t1 is populated with 359801 entries through this select statement.
Second Select Statement:
Select A B C X Y Z
     from T2 in it_t2 For All Entries in it_t1
          where A eq it_t1-A
             and B eq it_t1-B
             and C eq it_t1-C
Now Table T2 contains more than 10 lac records and at the end of select statement it_t2 is populated with 844003 but it takes a lot of time (15 -20 min) to execute second select statement.
Can this code be optimized?
Also i have created respective indexes on table T1 and T2 for the fields in Where Condition.
Regards,

If you have completed all the steps mentioned by others, in the above thread, and still you are facing issues then,.....
Use a Select within Select.
First Select Statement:
Select A B C P Q R package size 5000
     from T1 into Table it_t1
          where ....
Second Select Statement:
Select A B C X Y Z
     from T2 in it_t2 For All Entries in it_t1
          where A eq it_t1-A
             and B eq it_t1-B
             and C eq it_t1-C
do processing........
endselect
This way, while using for all entries on T2, your it_t1, will have limited number of entries and thus the 2nd select will be faster.
Thanks,
Juwin

How can I see all my open tabs?

When I use the drop-down Windows menu, it only shows the name of the window, not the tabs within each window. And I don't an option for "Activity Window" (like on Safari), or anything else that will show me all open tabs. How can I see them, as flipping through every open window is a pain....

Does anyone have a response? Or know why even the windows listed in my dropdown list isn't even in alphabetical order? Why does FF make managing open windows and tabs so very, very, cumbersome and difficult?? No other browser is this lame when it comes to that.... Is it really so hard to put them in order, or to add an "Activity Window", which would show all windows and tabs that are open?
Also, WHY DON'T the tabs and windows that open up when I hit Restore Previous Session show up in the HISTORY???? If they did, then I could simply delete all the other history, and I would have a list of all the tabs/windows, so when the number becomes too big, I can simply close them out, and at least have access to a means of re-opening them, As of now, I'm stuck either writing them all down, or one by one saving them as bookmarks (which i really don't want to do), , or who knows what, but again, this is a royal pain, that other browsers make far easier....

Error occured when giving down payment request through Tcode F-47

Dear All,
Following error occured when giving down payment request through Tcode F-47 by
inserting purchase contract in Purch. Doc. field :
Purch. doc. 4600000442 neither a purch. order nor a schedul. agmt.
Message no. ME703
please suggests
Regards
Shailesh

Hi
As error message states, you should put PO number instead of Purchase Contract number in downpayment request.
You can create a PO for that Purchase contract if you want purchase contract should also be used in that process.
Brgds
Abdulla

Key focus is not visible for all objects when tabbing

I'm using LabView 5.1.
The key focus is not visible for all objects when tabbing through a "disabled and grayed-out" object.
For example, let's say I create a panel with 3 buttons. If I create a "disabled" attribute for button 2 and assign the value "2" (disabled and grayed-out) to it. When I will run this VI, the key navigation will go through button 1 and button 3 (skipping button 2 as expected) but the key focus on button 3 will not be visible.
Is this a bug with LabView or am I doing something wrong ?

Hi Ben,
Don't worry, time is not an issue... I'm posting an example of a VI with the problem I described. I noticed that the problem occurs only with "dialog buttons".
When you have time, let me know if you see the same behavior. If you do, I will report the problem to National Instrument.
Thanks for your time !
BigBen
Attachments:
3buttons.vi ‏22 KB

Simply delete all entries in a database.

Hello,
how do I simply delete all entries in a database (which must be thread safe, and most probably is)? For instance it is needed, as I'm developing a versioned open source XML/JSON database system, whereas I'm using a BerkeleyDB environment/database as a transaction log per revision (resource/log/version_number/...) for dirty blocks/pages and now want to introduce checkpointing (with currently only a single write-transaction per resource). That is another reading transaction (possibly another thread might read a transaction log, a BerkeleyDB environment/database while another thread, the checkpointer (most probably a deamon thread) commits, that is writes the log periodically or during less workload into the real resource. After the data is commited, the transaction-log must be emptied, but probably a reading transaction still reads from the log and falls back to reading from the real resource if the page is not in the log. That is I can't remove the database, but probably simply have to delete all entries and a simple .commit-file flag which indicates if the data has been written back to the real resource or the checkpointer must be writing it back sometime in the future (if the .commit-file still exists). Do I have to iterate through the database with a cursor (and .getNext())? Or does a dedicated method exist?
kind regards
Johannes

Hi Johannes,
As I think you've already discovered, there is no built-in method for deleting all records of a database that is open. The only similar built-in methods are those for removing or truncating an entire database (removeDatabase and truncateDatabase), and the database must be closed.
If you can't find a way to use removeDatabase or truncateDatabase, then you'll have to iterate through the records and delete them individually. If this is done for a large numbers of records in a single transaction, it will be expensive on a number of fronts, including memory usage for the locks: each record is individually locked.
If you don't need to delete all records in a single transaction (I couldn't completely understand your use case), then you can iterate with a cursor using READ_UNCOMMITTED and delete the records in individual transactions using Database.delete. This avoids using lots of memory for the locks, since only one record is locked at a time.
In either case the cost can be reduced by using DatabaseEntry.setPartial(0, 0, true) for the DatabaseEntry that is passed as the data parameter. You only need the key to delete the record, not the data, and avoiding a fetch of the data is a big cost savings (if the record data is not in cache). This optimization is only in JE 5.0 and above --in JE 4.1 and earlier, this has no advantage because the data is always fetched internally, as part of the deletion operation.
--mark

On Mac OS X snow leopard, when I quit firefox 4, all the app tabs I set up get deleted. Is that suppose to happen? on your website it says that when you close firefox and reload the browser the app tabs should be there on start up?

When I close the firefox browser but I do not quit the program entirely, the app tabs remain as I had originally set them up.
But when I fully quit firefox. All the app tabs I set up are gone and I have to set them up all over again every time.

Here's what happened in safe boot mode.
I click on apple logo > software update > see's that Super Drive 3.0 is checked > click install
I wait for the install to go through.
First pop up says " There was a problem installing this update" Quit all apps before installing bla bla bla... I noticed a sound when this pop up appeared. It's the sound of when you restart the macbok. There is another popup behind this saying that software update has been sucessfully installed.
So what I did first was click "quit" on the popup saying "There was a problem installing this update".
then I clicked "ok" where it said that the software installation update was successfully installed.
I get another pop up which is the Software Update window. I let it look for any updates and it then says that my software is up to date. I noticed that Super Drive 3.0 is listed and cannot be checked [x]. There's a Check mark with a green circle around it.
I quit the software update window and click on apple logo > software update and let it do its thing. Next thing you know, It says that Super Drive 3.0 needs to be updated. I also checked the SERIAL ATA and still shows rev. CP06.
I just recently installed this mac os X so there is no "important" data on this laptop. I don't have any money for OS Lion or Mavrick nor meet the system req to run it. 2gb to 4gb is expensive for a ddr2 800 200 pin ram

Select statment using FOR ALL ENTRIES not allow to do sum,

Hi All,
SELECT DELIV_NUMB
SUM( GRS_WGT_DL )
UNIT_OF_WT
FROM /BIC/AGSSD000600
INTO TABLE I_GROSS
FOR ALL ENTRIES IN I_LAYTWO
WHERE DELIV_NUMB = I_LAYTWO-DELIV_NUMB
GROUP BY DELIV_NUMB UNIT_OF_WT.
While compiling it shows the error
The addition "FOR ALL ENTRIES" excludes all aggregate functions with
the exception of "COUNT( * )", as the single element of the SELECT
clause.
Please give some solution to do sum
with regards,
Thambe .

You could just select all entries into an internal table and then loop through and use COLLECT or similar to get your sum values.
Gareth.

Usage of FOR ALL ENTRIES in SELECT query

Hi All,
While writing SELECT query using FOR ALL ENTRIES, in the WHERE condition can we use IN operator on a range table?
Will this work out.
Thanks,
Anil Kumar

HI,
Yes you can use the in operator.
SELECT *
FROM MARC
INTO TAB:E i_mARC
FOR ALL ENTRIES IN I_MARA
WHERE MATNR EQ I_MARA_MATNR
AND WERKS IN S_WERKS.

Select query like For all Entries

Hi,
I have a requirement like:
I need to extract data (BKTXT) from table BKPF based on some criteria, into one internal table and I need to query on REGUP table for the above data, the selection criteria on REGUP as follows:
BKTXT(Document Header Text with 25 Char) is a combination of DATE and character string.
Ex: bkpf-bktxt = 20060710-PL02 (YYYYMMDD)
it is like LAUFD + LAUFI (of table REGUP)
i.e: LAUFD (REGUP) = 07/10/2006 (MM/DD/YYYY) and LAUFI(REGUP) = PL02
here I am thinking to use a select query on REGUP using FOR ALL ENTRIES of table i_bkpf..
How can I change the date format YYYYMMDD to MM/DD/YYYY for my requirement?
((    Run-on Date (REGUP-LAUFD) = the first 8 characters in the Document Header Text (BKPF- BKTXT) in MM/DD/YYYY date format (e.g. 07/10/2006)
   Run ID (REGUP-LAUFI) = the 10th character through the 15th character in the Document Header Text (BKPF- BKTXT)

It is not possible to do in the way you are thinking of doing. "For all entries" requires you to have the itab table field and the database table field to have the same type and length. So something like below <u>will not work</u>.
TABLES: regup.
DATA: BEGIN OF itab OCCURS 0,
        text LIKE bkpf-bktxt.
DATA: END OF itab.
DATA: BEGIN OF itab_regup OCCURS 0.
        INCLUDE STRUCTURE regup.
DATA: END OF itab_regup.
SELECT * INTO TABLE itab_regup
         FROM regup FOR ALL ENTRIES IN itab
        WHERE laufd = itab-text+0(8).
If you run this code, you will get an error as follows:
<i>"When using the addition "FOR ALL ENTRIES IN itab", the fields "LAUFD" and "ITAB-TEXT+0(8)" must have the same type and length."</i>

Select using for all entries

hi gurus,
plz check my report using for all entries where i am give data in selection screen from date to date as 3.01.2007 to 4.02.2007
my code does not provide me data between above date to date.
it fetch data from other date like 26.06.2006 to some other
plz check code and give me solution for it.
TABLES: bseg, bkpf.
*ALV grid_data
TYPE-POOLS: slis.
                       INTERNAL TABLES
TYPES: BEGIN OF it_output,
       bukrs TYPE bseg-bukrs, "Company Code
       belnr TYPE bseg-belnr, "Accounting Document Number
       gjahr TYPE bseg-gjahr, "Fiscal Year
       buzei TYPE bseg-buzei, "Number of Line Item
       augdt TYPE bseg-augdt, "Clearing Date
       shkzg TYPE bseg-shkzg, "Debit/Credit Indicator
       dmbtr TYPE bseg-dmbtr, "Amount in local currency
       kostl TYPE bseg-kostl, "Cost Center
       hkont TYPE bseg-hkont, "G/L Account
       matnr TYPE bseg-matnr, "Material Number
       werks TYPE bseg-werks, "Plant
       erfmg TYPE bseg-erfmg, "Quantity in unit of entry
       blart TYPE bkpf-blart, "Document type
       bldat TYPE bkpf-bldat, "Document Date
       budat TYPE bkpf-budat, "Posting Date
       monat TYPE bkpf-monat, "Fiscal period
       cpudt TYPE bkpf-cpudt, "Document Entry Date
       usnam TYPE bkpf-usnam, "User name
       tcode TYPE bkpf-tcode, "Transaction Code20
       bktxt TYPE bkpf-bktxt, "Document Header Text
       waers TYPE bkpf-waers, "Currency Key
       awtyp TYPE bkpf-awtyp, "Reference procedure
       awkey TYPE bkpf-awkey, "Object key
      END OF it_output.
TYPES: BEGIN OF it_bkpf,
       bukrs TYPE bkpf-bukrs,
       belnr TYPE bkpf-belnr,
       gjahr TYPE bkpf-gjahr,
       blart TYPE bkpf-blart,
       bldat TYPE bkpf-bldat,
       budat TYPE bkpf-budat,
       monat TYPE bkpf-monat,
       cpudt TYPE bkpf-cpudt,
       usnam TYPE bkpf-usnam,
       tcode TYPE bkpf-tcode,
       bktxt TYPE bkpf-bktxt,
       waers TYPE bkpf-waers,
       awtyp TYPE bkpf-awtyp,
       awkey TYPE bkpf-awkey,
      END OF it_bkpf.
DATA: lt_output TYPE it_output OCCURS 0 WITH HEADER LINE.
DATA: lt_bkpf   TYPE it_bkpf OCCURS 0 WITH HEADER LINE.
                   ALV DECLARATION DATA                              *
DATA: it_fieldcat   TYPE    slis_t_fieldcat_alv,
      it_heading    TYPE    slis_t_listheader,
      it_sort       TYPE    slis_t_sortinfo_alv,
      it_events     TYPE    slis_t_event,
      it_alv_event TYPE    slis_alv_event,
      gv_repname    TYPE    syrepid,
      gv_save       TYPE    char1,
      is_layout     TYPE    slis_layout_alv.
                 SELECTION SCREEN                                    *
SELECTION-SCREEN BEGIN OF BLOCK bl WITH FRAME TITLE text-011.
SELECT-OPTIONS: s_bukrs FOR bseg-bukrs NO INTERVALS,
                s_blart FOR bkpf-blart,
                s_budat FOR bkpf-budat.
SELECTION-SCREEN END OF BLOCK bl.
                 START OF SELECTION                                  *
START-OF-SELECTION.
PERFORM get_data.
                   End of Selection                                  *
END-OF-SELECTION.
PERFORM build_field_catalog.
PERFORM eventstab.
PERFORM display_data.
                         FORMS                                       *
*&      Form get_data
      Get Data
FORM get_data .
SELECT bukrs
         belnr
         gjahr
         buzei
         augdt
         shkzg
         dmbtr
         kostl
         hkont
         matnr
         werks
         erfmg
         INTO TABLE lt_output
         FROM bseg
       WHERE bukrs IN s_bukrs.
IF sy-subrc = 0.
    SORT lt_output BY belnr.
    DELETE ADJACENT DUPLICATES FROM lt_output COMPARING ALL FIELDS.
ENDIF.
IF NOT lt_output[] IS INITIAL.
    SELECT bukrs
           belnr
           gjahr
           blart
           bldat
           budat
           monat
           cpudt
           usnam
           tcode
           bktxt
           waers
           awtyp
           awkey
       INTO TABLE lt_bkpf FROM bkpf
       FOR ALL ENTRIES IN lt_output
       WHERE bukrs = lt_output-bukrs AND
             belnr = lt_output-belnr AND
            gjahr = lt_output-gjahr."AND
             blart IN s_blart        AND
             budat IN s_budat ."     AND
            blart = 'SA'     OR
            blart = 'SB'     OR
            blart = 'AB'     OR
            blart = 'ZC'.
*sort lt_bkpf by blart budat.
   DELETE lt_bkpf WHERE blart NOT IN s_blart AND
                        budat NOT IN s_budat.
ENDIF.
SORT lt_bkpf BY bukrs belnr.
SORT lt_output[].
DELETE ADJACENT DUPLICATES FROM lt_output COMPARING ALL FIELDS.
LOOP AT lt_output.
    READ TABLE lt_bkpf WITH KEY bukrs = lt_output-bukrs
                                belnr = lt_output-belnr
                                budat = lt_output-budat
                                BINARY SEARCH.
    IF sy-subrc = 0.
      MOVE: lt_bkpf-gjahr TO lt_output-gjahr,
            lt_bkpf-belnr TO lt_output-belnr,
            lt_bkpf-blart TO lt_output-blart,
            lt_bkpf-bldat TO lt_output-bldat,
            lt_bkpf-budat TO lt_output-budat,
            lt_bkpf-monat TO lt_output-monat,
            lt_bkpf-cpudt TO lt_output-cpudt,
            lt_bkpf-usnam TO lt_output-usnam,
            lt_bkpf-tcode TO lt_output-tcode,
            lt_bkpf-bktxt TO lt_output-bktxt,
            lt_bkpf-waers TO lt_output-waers,
            lt_bkpf-awtyp TO lt_output-awtyp,
            lt_bkpf-awkey TO lt_output-awkey.
      MODIFY lt_output.
   ELSE.
     DELETE lt_output.
    ENDIF.
ENDLOOP.
ENDFORM.                    "get_data
thanks jayant

Hi Jayant,
You cannot retrieve data first from BSEG and then from BKPF.
It is not correct and you cannot get the correct data.
You should use BKPF which is header table first and then
using for all entries retrieve data from BSEG.
Use date field in the select statement condition for BKPF table retrieval and
you don't have posting date field in BSEG.
If you do like this, it will definitely work.
Retrieve data from BKPF using date condition in SELECT statement.
Then, using for all entries retrieve from BSEG.
Reward if helpful.

Regenerate all entries in tab InfoSource through tcode RSA1

Similar Messages

Maybe you are looking for