Regenerate BSP

I am getting the following error message when I open my web interface "Error with initialization or error on BSP page. ...BSP application wwww does not exist. Regenerate".
After transporting into another instance I did not open the WI in transaction bps_wif0, which could have caused the problem. I have tried deactivating and reactivating the WI in trans. sicf without much luck and transporting again did not help either. I had been able to open the WI and view correctly initially in the display preview in bps_wb. The web interface opens fine in the original system.
Any solutions to resolve this issue on how to regenerate the BSP?

Hi JaM,
Did you make sure to activate the BSP-page in transaction SICF?
If not check in transaction SICF if your page is active (Tree: SAP/BC/BSP/SAP).
Hope this will solve your issue!
Regards,
Kurt

Similar Messages

BPS - Regenerate a BSP after transport

Hi all,
We are currently experiencing the problem that after transport from D to Q, our BSP's are not being regenerated automatically.
So, although the correct configuration (in the WIB) is to be found in Q after transport, the ABAP workbench view of the same BSP is still reflecting the pre-transport configuration.
Any ideas please....?
Thanks,
Rael

Hi Alessandro,
Whenever I generate the BSP in the WIB(web interface builder) it prompts for a transport.
When you say the BPS transport manager, do you mean the transport manager found in tx code BPS0....? I don't see the possibility to transport web interfaces from this transport manager...?
Thanks,
Rael

Error while creating a BSP application

Hello Experts-
I am trying to create a BSP application. This is the error what I am seeing, can any one let me know on what settings i have to make it work.
Could not create the associated SICF node automatically.
Add a node manually using "HTTP Service Maintenance"
(Transaction SICF)
Steps which I followed to create BSP app are
Se80> BSP application > name of app> enter> create local object.
Thanks,
Raj

hi,
Please check the thread before you post it, becoz its already posted and answered too
after getting the message
"Could not create the associated SICF node automatically.
Add a node manually using "HTTP Service Maintenance"
in the same window in the common box type "/nsu53" and hit enter.
system will give details about the missing authorization .
or
when you generate the web interface it automatically creates the SICF entry. Just make a litte change to the web interface and activate it again.
You can also regenerate an entire BSP application by calling the O2_GENERATE_BSPAPPL function module in the test environment of
transaction SE37 .
cheers,
Bhavana

Error while enhancing the BP_ADDR component using BSP component workbench

Hi ,
I am trying to enhance the BP_ADDR component using the BSP component workbench. But when I try to regenerate GET_I methods of my context node, I am getting the following error:
"Component GET_ADDRESS_GUID does not exist.
Determination of BOL attributes failed"
Please let me know the reason for this error and how to resolve it.
Thanks
Mreddy

Hi,
You may manually create the Get method for the attribute ADDRESS_GUID in your context node class.
Regards
Prasenjit

CSS in BSP page

Hi all!
I need your help because a trouble in my BSP application.
In fact my BSP seems to be lost some stylesheet when viewing BSP in a web browser.
Instead to see a formatted web page, I can see only some forms without any style, in a white background page.
We do not modify any existing stylesheet.
Which could be the problem?
How can I restore the original css?
Thank a lot to all!
Regards
Dan

Hi all
I found something interest concerning my problem.
If I select transaction se80 I'm able to find the css of my bsp. But if I try to display it, I have the message: Error while opening document.
This error occurs only with MIME object type. If I select a HTML page, i'm able to see its code.
Even more I tried the same on another system: in this last system all work correctly. So I think the the trouble concerns something in se80 and in MIME.
I alreay read some post about HTTP proxy cache in tx SICF, but i don't know what could happen after.
In SICF I checked if the services were active: and they are.
My question at this point is: there is a way to regenerate the entire MIME content?
This is a very urgent issue.
Thanks a lot!!
Daniele

Integrating BSP In UWL

Hi All
I have a BSP application i.e Purchase Requisition BSP Application . And linked work flow task and BSP application using Tcode SWFVISU .i.e to TS90000015.
But when i excuted it through Task in UWL it is executing SAP GUI RELATED TO TASK directly instead of current BSP application.
where im going wrong .
Do we need to register the task in UWL . what are the steps involved in registering the task in UWL . And what is role of priority in UWL.
Please help me out
Thanks

Hi Prasad,
It looks like you have an ABAP web dynpro in your visualization paramter in SWFVISU please check the link below for visualization paramater:
http://help.sap.com/saphelp_nw04s/helpdata/en/45/a7863f445f4617e10000000a114084/frameset.htm
After setting this all up in SWFVISU regenerate the HTML in your Portal for your UWL here is the link as well to do that.
http://help.sap.com/saphelp_nw04s/helpdata/en/59/6e0986d3bb4b05a08196a76c4a575f/frameset.htm
Cheers,

Integrating bsp inUWL

Hi All
I have a BSP application i.e Purchase Requisition BSP Application . And linked work flow task and BSP application using Tcode SWFVISU .i.e to TS90000015.
But when i excuted it through Task in UWL it is executing SAP GUI RELATED TO TASK directly instead of current BSP application.
where im going wrong .
Do we need to register the task in UWL . what are the steps involved in registering the task in UWL . And what is role of priority in UWL.
Please help me out

Hi Prasad,
It looks like you have an ABAP web dynpro in your visualization paramter in SWFVISU please check the link below for visualization paramater:
http://help.sap.com/saphelp_nw04s/helpdata/en/45/a7863f445f4617e10000000a114084/frameset.htm
After setting this all up in SWFVISU regenerate the HTML in your Portal for your UWL here is the link as well to do that.
http://help.sap.com/saphelp_nw04s/helpdata/en/59/6e0986d3bb4b05a08196a76c4a575f/frameset.htm
Cheers,

How can I open a PDF stored in IXOS and then display it in a BSP

Hello gurus,
I have created a PDF icon and an onclick action to open a pdf, that displays on every row of an assignment block in the actions column, but I do not know the technical process to determine how to get a PDF from the IXOS system from the line selected. (even if I know it depends on an ID attribute of that assignment block) I want to to call a transaction launcher with the url for the pdf in the IXOS that has an ID that identifies which line in the assignment block the user has clicked the pdf icon for (does that make sense?)
Therefore, I am assuming the PDF should correspond to the relance ID of the row in the assignment block, but I would like more information as per the business logic involved in able to achieve the desired results for this particular specification. I already confirmed that the XURL or any other attribute in the BOL object does not contain the URL to use for this. I have looked at the class I was told that it may contain the required business logic for determining which PDF in IXOS to fetch for a particular row, and I am currently trying to reverse engineer the logic through looking at other code and using the debugger, but so far I haven'T had much luck.
Here are some questions I have now for the functional side in the meantime:
1) Can we fetch the PDF in IXOS for each line of an assignment block?
2) Which URL should I call with the transaction launcher? a URL link to the PDF on the IXOS system??
3) Do we have to configure a transaction in the IMG to be launched?
4) Do we have to create a logical link there that I will make dynamic to call the right PDF for each table line?
5) Are there any existing examples of this or a similar functionality/ logic that I could refer to, preferably in CRM 7 WebUI?
6) Do you have any code to just display a PDF in a new window? Or prompt a download?
One possible way I thought of would be for me to have a logical link defined in the IMG, that I could call passing it different attributes (eg. some object id, etc) and then return the PDF and display it in the UI in a new browser window by itself. Alternatively, we can just prompt a download. What do you think would be the optimal behaviour here?
Please do not hesitate to propose any potential solution. Any partial answers/ links to wikis/ other threads, anything would be much appreciated.
Thank you in advance.
Best regards,
Jonathan Laplante

Hi,
I partially answered your question in another posting but I feel that you´re in the wrong forum for your problem. This is for BSP development and you talk about CRM.

Any ideas on a nice BSP view pretty printer?

Hi there,
I am wondering whether somebody already tried to extend the SAP standard pretty printer by an own functionality which fits better for pages with mixed content, containing not only BSP-elements but also HTML-tags.
The standard pretty printer considers everything as plain text which is not a BSP-element and leaves it unaltered. Only BSP-elements are arranged according to their tree structure.
This produces ugly results for pages with mixed content.
1.) Requirement
A Pretty Printer for HTML-based BSP views should cover the following:
(a) HTML-Tags and BSP-elements together form the chain. As in following example:
<z:table table_id="testTab" binding="//test/gt_test" rows="5">
<z:tableBody position="top">
    <colgroup>
      <col width="4%">
      <col width="96%">
    </colgroup>
</z:tableBody>
<z:column name="type" header="<%=zcl_bsp_util=>dtel_text_s('EDI_TTYP')%>"
            listPos="10"/>
<z:column name="text" listPos="20"></z:column>
</z:table>
(b) Certain HTML formatting tags like I, B, etc. should not be added to the stack but be treated inline.
(c) HTML-attribute names should be converted to lower case, the attribute values should be quoted.
(d) Like for BSP-elements, there should be a threshold after which the attributes should appear in separate lines. Instead of a certain maximum "number of attributes", this could also be a maximum number of characters per line.
(e) Scripting Tags (<% ... %>) should start at a new line, if the content contains new-lines.
(f) Evaluation Scripting (<%= ... %>) should be inline, if they are contained within text nodes (and not within HTML oder BSP element nodes).
(g) The Pretty Printer should be parametrizable (with parameters like indent-depth,... ).
2.) Exits?
Of course, one could always use an external HTML editor and write an add-on for that editor which produces the desired result. Or one could take the view content into the clipboard, paste it into a plain text editor like UltraEdit or TextPad which allows external commands, apply an external, self-written pretty printer to it and then paste the result back into the View. But it would be easier to use the "Pretty Printer" button directly to get the result. Therefore the question arises at which point the standard Pretty Printer Functionality could be modified or extended.
I didn't find an exit. But the pretty-print itself is doubly-decoupled in the standard which minimizes the number of points where an extension has to be made:
2.a) First decoupling point: The Fcode handler method pretty_printer_ext( ) in cl_o2_page is calling
dynamically a method in cl_o2_co2_processor:
* call pretty printer
create object pp type ('CL_O2_CO2_PROCESSOR').
appl_str = me->pagekey-applname.
page_str = me->pagekey-pagekey.
try.
      CALL METHOD pp->('PRETTY_PRINT')
        EXPORTING
          indent              = 2
          ATTRIBUTE_NORMALIZE = 'X'
          ATTRIBUTE_THRESHOLD = 2
          BSP_UNFORMATTED     = source
          appl                = appl_str
          page                = page_str
        IMPORTING
          test_ok             = test_ok
          BSP_FORMATTED       = pp_source.
    catch cx_o2_co2_exception into o2ex.
2.b) Second decoupling point:
The method pretty_print() of class cl_o2_co2_processor (fancy names, by the way. It seems that many former chemistry students had joined the BSP team ),
there is a second delegation, to a local class, as follows:
data pretty type ref to LCL_BSP_PRETTY_PRINT.
pretty = LCL_BSP_PRETTY_PRINT=>getInstance( processor = me ).
The real logic for doing the Pretty Print, finally, is performed in this local class.
3.) Implementation.
Since, up to my knowledge, there is no HTML parser in the ABAP world,
the implementation could be based on existing HTML Parsers, like the Perl module Parser::HTML, or the Java package http://htmlparser.sourceforge.net/ . The pretty printer could then be called as external OS command.
Are there any ideas out there? Or is there somebody who already worked in this direction?
Regards,
Rüdiger

For those who are interested. I found out that the Dave Ragget's classic "HTML Tidy" (see <a href="http://tidy.sourceforge.net/">http://tidy.sourceforge.net/</a> ) is available in ABAP! There is a class CL_HTMLTIDY (at least here in my SAP_BASIS 700 system) which wraps calls of HTML Tidy by kernel modules.
The class is undocumented, but there are 2 OSS notes of this year for it, so it might well be that it is alive.
HTML Tidy can surely not directly be used for Pretty Printing BSP views, but for designing test cases or for doing things like HTML parsing, it might be a helpful tool.

Error in using PERFORM in eventhandler in a BSP Application.

Hi All,
Can we use Subroutines in BSP applications?
If yes then please help me with syntax .
Best Regards,
Anubhav.
Edited by: Anubhav Jain on Dec 20, 2007 10:52 PM

You can call subroutine with below Synatx:
DATA: progname(20) TYPE C VALUE 'YTESTINCLUDE' .
PERFORM your_perform_name IN PROGRAM (progname) IF FOUND.
"where your_perform_name is the form within the include program YTESTINCLUDE[/code]
Raja T
Edited by: Raja Thangamani on Dec 20, 2007 4:58 PM

Problem with index of numbers in BSP Front end

Hello All,
I am facing the below problem. Request your help.
Scenario: When I am trying to add the projects in the Front end , I am facing the problem with the index of numbering of the projects.
Example: If I am adding 6 projects ( at the max only 4 on each page i-e there are 2 pages ), then the index is wrongly numbered and the arrow (for direction of the pages) are wrongly displayed. The direction of the arrow is pointed to the next page rather pointing to the previous page and the index of numbering of the pages is wrong.
Request you to please suggest if this is any code fault in the table maintainance activity in the backend (BSP).

Hi Irina,
If you mean the number range is skipping 10 numbers in between runs then its because of the buffering in the number range.
To avoid the buffer influencing the number range, pass
'X' to the function module parameter: IGNORE_BUFFER.
This should resolve the problem.
Cheers,
Aditya

BSP Error while selecting "campaign elements" in spanish --- crm 2007

Hi experts,
I´m trying to look for a solution for a problem with an error that occours while selecting in WEB UI --marketing --- campaign elements , in spanish language.
Error Business Server Page (BSP)
<thtmlb:textView>: (design) The Attribute Value is not a Value from: STANDARD/HEADER1/HEADER2/LABEL/VALUE/ITALIC/BOLD
In english it works perfect.

Which field is? Has translate value content to spanish for this field?.
In SAP CRM UI, press F2 and tell me which is the field

Badi/exit/Workflow called during execution of the BSP "SRMSUS_SELFREG"

Hi all,
We are running on SRM 5.0.(SP06) Strategic sourcing scenario.We are using enterprise Portal as the front end.My query is that at the end of Supplier registration process,when the Supplier admin creates the USER ID's for the Suppliers(through BSP SRMSUS_SELFREG),is there any way by which we can create the enterprise Portal users for those suppliers at the same time(Automation) ?My BASIS person told me that the automation is possible when the EP system is connected only to 1 backend but in our landscape we are having several systems connected to EP.
Other alternative would be to send a mail to the EP administrator stating that the Vendors User ID's have been created in SRM and the EP ID's need to be created.
For this ,i didnt get any BADi/exit which gets triggered during this USER ID creation process wherein i can write my logic for sending the mail to the EP admin.
There are some Std workflows (e.g. WS10000209)for USER creation but these dont seem to be useful in this scenario.
So the only method left is to modify the Std BSP which we dont want.Has anybody worked on this kind of scenario?
Any suggestions are welcome and will be rewarded as well.
BR,
Disha.

Hi
I am still searching.. but no BADI/Exit is called in this case..
<u>Meanwhile, i found few SAP OSS notes, which you can go through -></u>
Note 1031896 Delimiting of Supplier Reg URL due to Special characters
Note 1031070 Supplier cannot be registered
Note 996030 Need to relogin to srmsus_selfreg service when using aliases
Note 1032573 FormofAddr field mandatory in userselfreg.htm page
Note 1003820 Supplier cannot be registered
Note 889451 Not Possible to register in Supplier self-registration
Note 807511 Error message after self registration of supplier admin user
Note 784883 Irrelevant warning message stops self registration
Do let me know.
Regards
- Atul

Xcelsius Dashboard on SAP R/3 Table using BSP and XML Mapping

Hi Experts,
I have developed a simple dashboard on small data set (10 records) that I am fetching from a R/3 Table into BSP and generating XML from there and consuming it in Xcelsius (SAP R/3 + BSP + XML Mapping).
Now I want to fetch data based on Variables values that should be passed from the dashboard at the runtime and should display the data accordingly. Any help on how it can be achieved?
Thanks..!!
Sharad

Hi,
You could try doing this by using XML data connection. You would have to make use of Enable load to get the data from XML and Enable send to send data back to XML from dashboard.
This would require you to write a script.
Thanks,
Amit

Unable to capture the Idle time for BSP page

Hi Experts,
I want to capture the Idle time of my BSP page. If that is 5 mins then i have to display the pop up displaying the remaining time.
Please let me know how to capture the IDLE TIME. not the time after the page is loaded.
Any suggestion will be helpful.
Aready checked in SDN but unable to get the solution so posting it.
Thanks in advance.
Sravanthi.V

hi,
After capturing the idle time iam giving the warning popup to user before 5mins of expiry.Now my requirement is if the user clicks on OK button of popup the page should get refresh. i.e.Idle time should of system should break and we have to get one more hour for expiry.
Thanks in advance,
Sravanthi.V

Regenerate BSP

Similar Messages

Maybe you are looking for