Regenerate filter and aggregation with RSRT2

Hi Everybody,
We have a problem with a planningsequence, Global Support adviced us to regenerate the filter and aggregation. We're familiar with regenerating queries but not with filters and aggregations. Can somebody help me how te regenerate a filter with the transaction RSRT2.
Thanks,
Patrick
Answer Global support:
Regarding the issue,
As from the description in the message, you are using BI-Integrated
Planning. The problem occurs when you execute two planning sequences.
first sequence (FI01PV0069)
second sequence (FI01PV0070)
As per the description , the second sequence (FI01PV0070) is not workingas expected.
For this i would request you to please regenerate the 'filter' and the
'aggregation' which are used for these planning sequence.
You can regenerate the filter in transaction RSRT2.

Hi Patrick,
When you develop the input queries you should be pulling the filters/aggregation levels into the the Queries.
Though the message is to regenerate the Filters/Aggregation Levels.....inturn if you regenerate the Query everything below it gets re-generated.
Try that....you may make thing work.
Regards
Srinivas

Similar Messages

Filter and aggregation level in bi 7.0

hi friends,
what is aggregation level and filters option in bi 7.0 reporting when i open reporting that options are there. i observed in filter we are creating some variables.
ple give me clarification
Thanking u
suneel.

aggregation level is for SEM IP - integrated planning and filters are same
https://www.sdn.sap.com/irj/sdn/bi?rid=/webcontent/uuid/e78a5148-0701-0010-7da9-a6c721c6112e
In the above link check for "query designer" Demo for better explaination and its use.
Hope it Helps
Chetan
@CP..

Upload text file to oracle table with checking and aggregation

Hi Friends,
I am new to ODI. I have encountered a problem which is specific to ODI 11G (11.1.1.6.3) to upload text file to oracle table with checking and aggregation. Would you please teach me how to implement the following requirement in ODI 11G?
Input text file a:
staffCode, staffCat, status, data
input text file b:
staffCodeStart, staffCodeEnd, staffCat
temp output oracle table c:
staffCat, data
output oracle table d:
staffCat, data
order:
a.staffCode, a.staffCat, a.status
filter:
a.status = ‘active’
join:
a left outerjoin b on a.staffCode between b.staffCodeStart and b.staffCodeEnd
insert temp table c:
c.staffCat = if b.staffCat is not null then b.staffCat else a.staffCat
c.data = a.data
insert table d:
if c.staffCat between 99 and 1000 then d.staffCat = c.staffCat, d.data = sum(c.data)
else d.staffCat = c.staffCat, d.data = LAST(c.data)
Any help on fixing this is highly appreciated. Thanks!!
Thanks,
Chris

Dear Santy,
Many thanks for your prompt reply. May I have more information about the LAST or SUM step?
I was successful to create and run the following interfaces p and q
1. Drag text file a to a newly created interface panel p
2. Filter text file a : a.status = ‘active’
3. Lookup text file a to text file b : a.staffCode between b.staffCodeStart and b.staffCodeEnd
4. Drag oracle temp table c to interface panel p
5. Set c.staffCat : CASE WHEN b.staffCat IS NULL THEN a.staffCat ELSE b.staffCat END
6. Set c.data : a.data
7. Drag oracle temp table c to a newly created interface panel q
8. Drag oracle table d to interface panel q
9. Set UK to d.staffCat
10. Set Distinct Rows to table d
11. Set d.staffCat = c.staffCat
12. Set d.data = SUM(c.data)
However, the interface q should be more than that:
If c.staffCat is between 99 and 1000, then d.data = the last record c.data; else d.data = sum(c.data)
Would you please teach me how to do the LAST or SUM steps? Moreover, can interface p and interface q be combined to one interface and do not use the temp table c? Millions thanks!
Regards,
Chris

OBIEE 11g - Aggregation With filter

Hi all ,
I have a reg where the condition to be applied in ONE COLUMN of a report is as follows
select count(*)
from (SELECT SUM(quantity),SUM(quantity_received) qty_rec ,SUM(quantity)-SUM(quantity_received) qty ,po_header_id
      FROM F_ERP_PO
      group by po_header_id)
where qty > 0
and qty_rec <> 0
.. I have multiple columns in the reports with varying conditions
I tried out in different ways but could not bring the answer since this condition is just ofr one column and the next column has other conditions.
Kindly help me in simplifying this report . I am stuck with it for long
Thanks in advance,
Regards,
Niv d

Hi Chris,
Thanks for ur response.
I tried usinf FILTER() function in different ways. But I had a comparison like
FILTER("F1 Facts"."Total Revenue" USING (sum("PO"."Quantity") = sum("PO"."Quantity_Recieved") )) .
Here the error is like Cannot use aggregation with the USING clause .
I even tried with, Filter based on another request feature , it throws an error saying 'cannot use multiple select clause '
Any suggestions would be very helpful.
Regards,
Niv D

How to use aggregator with filter operator

Hi,
how can i use aggregation with filter operator. i have a table, form this table i have to calculate this valurs
1. no of notes
2. no of open notes where attribute =y (logic for one notes is count(notes) where attribute =y)
2. no of closed notes where attribute =n
for this i used like this
table --> two filter operators 1 is for attribute =y and one is for attribute=n ----> to aggregaror operator. --- i am getting error.
Regards,
Jyothy

Jyothy,
Try this..
U can use the below code in the aggregator without filters
sum(decode(notes,'y',1,0) adn sum(decode(notes,'n',1,0)
Regards,
Sivarama

WebI issue with hierarchy display and aggregation

Trying to wrangle what looks like a defect in WebI's handling of hierarchy display and aggregation. We just completed an update cycle and are running BOBJ 4.1 SP4.
The hierarchy is a standard FM Commitment Item hierarchy in which both the nodes and leaves are Commitment Items (i.e. it uses InfoObject nodes, not text nodes). An example of one of these nodes looks like this in BW:
Cmmt_Item A - Node
    Cmmt_Item B - Leaf
    Cmmt_Item C - Leaf
Let's pretend Commitment Item A has $50 posted to it, B has $20 and C has $30. Analysis for OLAP handles this by adding a virtual leaf line to distinguish postings that are on the parent node like so:
Cmmt_Item A - Node       $100
    Cmmt_Item A - Leaf    $50
    Cmmt_Item B - Leaf    $20
    Cmmt_Item C - Leaf    $30
So you see both the total for the node ($100) and a line for each Commitment Items with KFs posted to them. Our users like this. They can easily see the aggregation and the breakdown.
WebI, on the other hand, will display it like this:
Cmmt_Item A - Node       $150
    Cmmt_Item B - Leaf    $20
    Cmmt_Item C - Leaf    $30
It doesn't create a separate line for the value of the parent node, but it does add it's value into the aggregate. Twice. Modifying the table with the 'avoid duplicate row aggregation' checkbox yields output like this:
Cmmt_Item A - Node       $100
Cmmt_Item A - Node        $50
    Cmmt_Item B - Leaf    $20
    Cmmt_Item C - Leaf    $30
We're about halfway there. While the top row now shows the correct aggregation and it creates a new line to show the distinct amount on the parent node, that new line appears on the same level as the parent. It's no longer clear that there's an aggregate and a breakdown. And attempting to expand or contract a node will now crash the report with one of those 'Error 16' messages.
Has anyone encountered this issue with hierarchies in WebI? This report was built from scratch in 4.1, so I'm not sure if this affects older versions or not. Or if it would affect any hierarchy that uses InfoObject nodes instead of text nodes.

Without a fix, the simplest workaround I can think of would be to restructure the hierarchy. It can't use postable nodes, so Cmmt_Item A - Node from my example would need to be converted into a text node and the postable characteristic added as a child on the same level as the B and C leaves.
This looks like it would affect anyone using hierarchies with postable nodes in a WebI report.
Another oddity in WebI's behavior here - even though the postable nodes show incorrect sums the sum at the root node is correct. So extending my examples from the original post:
Root Node                    $100
    Cmmt_Item A - Node       $150
        Cmmt_Item B - Leaf    $20
        Cmmt_Item C - Leaf    $30

Report with non aggregated and aggregated columns from different facts.

Hi,
We have got requirement as follows,
1) We have two dimension tables, and two fact(Fact1 and Fact2) table in physical.
2) In BMM we have made hierarchies for both dimensions, and are joins both logical fact table.
3)In fact1, we are having three measures of which we have made two as aggregation sum, and one is non aggregated(It contains character).
4)Fact2 have two measures, both are aggregation as sum.
5)Now here the problem arises, we want to make a report with some columns from dim and non aggrgated column from fact1 and and aggregated column fact2
How to resolve the above issue.
Regards,
Ankit

As suggested you really want to move your none-aggregated fact attributes to a logical dimension (using the same physical table as the logical fact). Map this in the BMM layer as a snowflake, Place a hierarchy on this dimension with (at minimum) Total -> Detail levels, then on the other fact table you want to include in the report, set the content level on your other fact measures to the 'Total' level for your new logical Dim and it will allow them to be present in the same report.

Use wildcard in LDAP search with filter and filter args fails

Hi,
I'm writing a function that receives the search filter and the filter arguments and returns the attributes of the found entries but I'm having problems when I pass the wildcard '*' as argument. For example I'm looking for cn=* but instead it looks for cn=\2a (searches for cn containing *).
I'm using the InitialLdapContext function:
public NamingEnumeration<SearchResult> search(String name,
String filterExpr,
Object[] filterArgs,
SearchControls cons)
throws NamingException
The problem occurs in the class com.sun.jndi.toolkit.dir.SearchFilter format method where it replaces the filter place holders with the filter arguments. There it calls getEncodedStringRep to the arguments and that function returns the wildcard '*' escaped.
Is it supposed to behave like that? I don't have problems using the search function search(String name, String filterExpr,Object[] filterArgs, SearchControls cons) but I'd like to be able to separate the filter and the filter arguments.

That's a forum artefact, as the boldface should make obvious.
My point is that you should specify the wildcard in the filter string, not as an argument. See http://download.oracle.com/javase/6/docs/api/javax/naming/directory/DirContext.html#search(javax.naming.Name,%20java.lang.String, java.lang.Object[],%20javax.naming.directory.SearchControls). (The forum will break that link too.) The argument asterisk is being escaped in accordance with what it says there. Or maybe you can escape it yourself as an argument as \0x2a.

Complex request with range filter and boolean search

Hi
I need a build and maintain complex requests to Oracle Endeca Server. These requests could include different types of attributes: string, datetime, int.
For string attributes I have created a search interface and use boolean search. For datetime attributes I use a range filter. Separately it works as I expected, but it fails with combined search with range filter and boolean search in a single request. As I see from results range filter is completely ignored. What could be wrong with following request?
<?xml version="1.0" ?>
<S:Envelope xmlns:S="http://schemas.xmlsoap.org/soap/envelope/">
<S:Body>
<ns3:Request xmlns:ns2="http://www.endeca.com/MDEX/lql_parser/types" xmlns:ns3="http://www.endeca.com/MDEX/conversation/1/0">
<ns3:State/>
<ns3:Operator xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="ns3:RecordFilterOperator">
<ns3:RecordFilter Name="OnlyData">AND(NOT(mdex-property_Key),NOT(mdex-dimension_Key),NOT(mdex-config_Key),NOT(mdex-precedenceRule_Key),NOT(system-group_Key),NOT(system-group-membership_Key))</ns3:RecordFilter>
</ns3:Operator>
<ns3:Operator xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="ns3:SortOperator" Direction="Descending" Key="string_prop" OwnerId="Records"/>
<ns3:Operator xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="ns3:RangeFilterOperator">
<ns3:RangeFilter AttributeName="dateTime_prop">
<ns3:LowerBound Inclusive="true">2012-07-24T19:47:01Z</ns3:LowerBound>
</ns3:RangeFilter>
</ns3:Operator>
<ns3:Operator xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="ns3:SearchOperator">
<ns3:SearchFilter SnippetLength="20" EnableSnippeting="true" Mode="Boolean" Key="orderSearch">multiple_prop : one</ns3:SearchFilter>
</ns3:Operator>
<ns3:ContentElementConfig xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="ns3:RecordListConfig" HandlerFunction="RecordListHandler" HandlerNamespace="http://www.endeca.com/MDEX/conversation/1/0" Id="Records">
<ns3:RecordsPerPage>3</ns3:RecordsPerPage>
</ns3:ContentElementConfig>
</ns3:Request>
</S:Body>
</S:Envelope>
If my approach is incorrect could you provide me a a better way to handle such requests?
Regards,
Eugene.

Hi Eugene,
As you know, this issue has been discussed further, so I am posting here the summary of the findings, with the hope that this summary will benefit the Endeca Server user community at large.
* Boolean search only works with range filters for the AND operator. The documentation link above confirms this.
*Because of this restriction, you need to build another query that would achieve the same result. Both options are equally good and would achieve the results you need. Two suggestions that we've received were:
- Option 1. You could perform the key restriction of the search via a restrictive search interface rather than using the boolean match mode. This would involve creating a search interface for each field and then querying against the search interface for the field in question:
<Operator xmlns="http://www.endeca.com/MDEX/lql_parser/types" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="SearchOperator">
<SearchFilter SnippetLength="20" EnableSnippeting="true" Mode="All" Key="orderSearch_for_field_multiple_prop">one</SearchFilter>
</Operator>
For this option, you would have to create a search interface for each attribute, using the Config Web Service. Here is the topic about loading config documents into the Endeca Server:http://docs.oracle.com/cd/E29805_01/server.230/es_dev/toc.htm#Loading%20configuration%20documents
- Option 2
* You could implement the range filter through EQL row expression syntax instead and pass it in via the DataSourceFilterOperator, which acts as a prefilter on all other query logic, using the Conversation Web Service. Thus you might include:
<Operator xmlns="http://www.endeca.com/MDEX/lql_parser/types" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="DataSourceFilterOperator">
<DataSourceFilterString>dateTime_prop <= TO_DATETIME('2012-07-24T19:47:01Z')</DataSourceFilterString>
</Operator>
For this option, using the DataSourceFilter does not require you to model the rest of the query in EQL. It will perform slightly better than the filter in option 1 because of the order in which record set intersections are computed, but the difference is likely to be very small.
Finally, if this addresses your question, please mark this question as answered, so that others can benefit from it on the forum. Big thanks to Endeca Server development team (you know who you are!), for helping to find solutions for this request.
Julia
Edited by: JuliaM on Aug 30, 2012 2:05 PM
Edited by: JuliaM on Aug 30, 2012 2:06 PM

WebPart: Display the search result in an spgridview with filter and sort

hi,
For explain more in details.
I need the search result in a table displaying some meta common in the different library.
I've to have the possibility to filter and sort the grid.
i'm trying to extend Microsoft.Office.Server.Search.WebControls.CoreResultsWebPart
i can have the result from the textbox search with: SharedQueryManager.GetInstance(this.Page).QueryManager
My queryManager is populate in the method: CreateChildControls
I put the sample code i use. and in the populateData method, my querymanager is null while in the createChildContriol, it's correctly populate with : this.queryManager = SharedQueryManager.GetInstance(this.Page).QueryManager;
using System;
using System.ComponentModel;
using System.Web;
using System.Web.UI;
using System.Web.UI.WebControls;
using System.Web.UI.WebControls.WebParts;
using Microsoft.SharePoint;
using Microsoft.SharePoint.WebControls;
using Microsoft.SharePoint.Search.Internal.WebControls;
using Microsoft.Office.Server.Search.Query;
using Microsoft.Office.Server.Search.WebControls;
using System.Data;
using System.Xml;
namespace CustomSearchResultWebPart.CustomCoreResultWebPart
[ToolboxItemAttribute(false)]
public class CustomCoreResultWebPart : Microsoft.Office.Server.Search.WebControls.CoreResultsWebPart
private ObjectDataSource objDS;
private const string ObjectDataSourceID = "gridViewDataSource";
private QueryManager queryManager;
private SPGridView gridView = new SPGridView();
protected override void CreateChildControls()
//here is correctly populate
this.queryManager = SharedQueryManager.GetInstance(this.Page).QueryManager;
try
LoadSearchGrid();
catch (Exception ex)
Page.Response.Write(ex.Message + " - " + ex.StackTrace);
//base.CreateChildControls();
protected override void OnInit(EventArgs e)
base.OnInit(e);
protected override void OnLoad(EventArgs e)
base.OnLoad(e);
protected override void OnPreRender(EventArgs e)
//gridView.DataBind();
base.OnPreRender(e);
protected override void Render(HtmlTextWriter writer)
base.Render(writer);
public DataTable populateData()
DataSet dtSet = null;
DataTable dtTable = null;
//here is my query manager is null
if (queryManager != null && queryManager.Count > 0)
XmlDocument xdoc = new XmlDocument(); //We are using XmlDocument
xdoc = queryManager.GetResults(queryManager[0]);//xml returned by search
if (xdoc != null)
XmlReader xmlReader = new XmlNodeReader(xdoc);
dtSet = new DataSet();
dtSet.ReadXml(xmlReader);
if (dtSet.Tables.Count > 1)
dtTable = dtSet.Tables["Result"];
return dtTable;
private void LoadSearchGrid()
this.objDS = new ObjectDataSource();
this.objDS.ID = ObjectDataSourceID;
this.objDS.SelectMethod = "populateData";
this.objDS.TypeName = this.GetType().AssemblyQualifiedName;
this.objDS.ObjectCreating += new ObjectDataSourceObjectEventHandler(objDS_ObjectCreating);
this.Controls.Add(objDS);
gridView.ID = "_gridView";
gridView.AutoGenerateColumns = false;
gridView.Width = new Unit(100, UnitType.Pixel);
gridView.EnableViewState = false;
gridView.AllowPaging = true;
gridView.PageSize = 5;
gridView.DataSourceID = ObjectDataSourceID;
this.Controls.Add(gridView);
void objDS_ObjectCreating(object sender, ObjectDataSourceEventArgs e)
//e.ObjectInstance = objDS;
protected void gridView_RowDataBound(object sender, GridViewRowEventArgs e)
//throw new NotImplementedException();
Do you have a sample that i can use or some tutorial?
thanks for your help

I added this in my class
public class CustomResultsDatasource : CoreResultsDatasource
public CustomResultsDatasource(Microsoft.Office.Server.Search.WebControls.CoreResultsWebPart parentWebPart)
: base(parentWebPart)
View = new CustomResultsDatasourceView(this, GetType().Name);
public class CustomResultsDatasourceView : CoreResultsDatasourceView
public CustomResultsDatasourceView(SearchResultsBaseDatasource dataSourceOwner, string viewName)
: base(dataSourceOwner, viewName)
//make sure we have a value for the datasource
if (DataSourceOwner == null)
throw new ArgumentNullException("DataSourceOwner");
CustomResultsDatasource datasource = this.DataSourceOwner as CustomResultsDatasource;
this.QueryManager = SharedQueryManager.GetInstance(datasource.ParentWebpart.Page).QueryManager;
And this in my customSearchResultWebPart
protected override void CreateDataSource()
//base.CreateDataSource();
this.DataSource = new CustomResultsDatasource(this);
How can i use queryManager in populateData?
thanks for your help

Create prompt with date-filter and initialize it with current date

Oracle BI 11 g
Hi!
I need to create dashboard prompt with date-filter and initialize it with current date. How can I do that?
I tried to create repository initialization block and add variable. But I don't know what should I write to DataSource? I tried to use functions Now(), Current_Date, sysdate (for example, SELECT Now() FROM tbl_Calendar) but without results - when I pressed "Test..." button I got errors - something like "Now() is unknown function" or "Incorrect syntax near key word Current_Date".
After that I tied to use Presentation Variable in Prompt, but also without success ((
Please, help me.

I've created Repository Variable "CurrentDate", using SQL-query like this "select convert(varchar(10), getdate(), 104)" and now this variable is being initialized by value "07.04.2011". But I don't understand how to use this varible in DashboardPrompt! What item in list "Default selection" I should choose - "Variable Expression", "Server Variable" or something else? When I chose "Variable Expression" and write "CurrentDate" I got just string "CurrentDate" when preview Prompt. @{CurrentDate} gave me the same result.

What is the difference between Aggregation and Composition with example

plz help me to find the difference between Aggregation and Composition with example

Dear [email protected]:
Get back to work.
August 4, 2007 stalin_gnana asked:
I would like to know the description about 'is a' ,'has a' ..relationship in java.plz reply me to the above doubt if known
August 8:
Can any one encounter the clarification on how and where Observer class and Observable interface can be applied..plz answer me
August 10:
May you find a solution on why not have the concept of pointer,opterator overloading,virtual function and destructor in java
(Also August 10):
I would desire to apprehend the brief description about usage of Singletone class and where it can be applied.plz help me
Today:
I am having the doubt of 'is there any relation among Delegation and composition'.if have,plz answer to regarding question.
And then this thread today too.
sniff sniff
I smell a lazy attempt at getting others to do one's homework for him.

[All Platforms][Your Music] Make it possible to tag and filter "My Music" with user-defined tags

It would be very nice and convenient to be able to tag and filter "My Music" (playlists, songs, albums and artists) with user-defined tags. I'm sure quite a few users would like to classify their music by genre. Myself, I would like to tag my albums, assigning them to different virtual collections.

Updated: 2015-07-23Hello and thanks for the feedback!
A similar idea has also been suggested here:
https://community.spotify.com/t5/Live-Ideas/Your-Music-Grouping-or-Sorting-by-Tags/idi-p/744947
Add your kudos and comments there please! ;)

The Graduated Filter and Adjustment Brush in Lightroom 4 | The Complete Picture with Julieanne Kost | Adobe TV

In this episode of The Complete Picture, discover the power of making selective adjustments like dodging and burning, color corrections and noise removal using the Graduated Filter and Adjustment Brush in Lightroom 4. Note: although this video was recorded in Lightroom, the same techniques are available in Adobe Camera Raw in Photoshop CS6.
http://adobe.ly/QPYXzm

Julianne is a great tutor but the picture behind her head is distracting.
Tom Torda

Increments Of 100 With Grad Filter and Adj Brush Using Scroll Wheel and Arrows

For Vista 64 bit and Nvidia GeForce 8500 GT driver version 7.15.11.6960,
both the graduated filter and adjustment brush change at increments of 100 or 200 using the scroll wheel or arrows for everything except exposure. Brightness goes from -200 to 0 to 200 while the others go from -100 to 0 to 100.

Seen that as well. Keyboard focus has been an issue for me on Vista x64 OS for quite sometime.Sometimes the arrows don't move in even increments on all the sliders for various adjustments.
In this case the arrow keys move either side of 0 to the maximum exent of the range. In this case brightness has a range of + or - 200 while the other sliders move = or - 100

Regenerate filter and aggregation with RSRT2

Similar Messages

Maybe you are looking for