Regenerate the security files : SecStore.properties and SecStore.key

Hello Expert,
I have a big issue because I lost the both files : SecStore.properties and SecStore.key from the directory /sapmnt/SID/global/security/data. I tried to regenerate the SecStore.properties from another instance. And when I tried to connect via Configtool I have the following error message : The encryption key (usually in the key files) is
not the key that is required to decrypt the data in the secure store file or the system name is wrong (SID).
I think that the idea is to generate the new key file.
Could you please help me to find a solution to solve this issue.
Many thanks in advance for your greatfull help.
Regards
San

Check this out, though it doesn't directly address your problem. It should definately give you more insight.
http://help.sap.com/saphelp_nw04/helpdata/en/cd/14c93ec2f7df6ae10000000a114084/frameset.htm

Similar Messages

I can no longer print to the 3 Canon printers on my local area network. The print dialog box states that the print file is accepted and the job is printing, but the files never print. Everything worked when the computer and printers were initially set up.

I can no longer print to the 3 Canon printers on my local area network. The print dialog box states that the print file is accepted and the job is printing, but the files never print. Everything worked when the computer and printers were initially set up.

There may be some security issues related to the USPS PDFs.
http://www.certified-mail-envelopes.com/signatures-usps-certified-mail-return-receipt-requested
I can't help with the scan/print problem. You seem to have done everything I would try.
I don't know if maybe using a registry cleaner would help.
John Hoffman
Conway, NH
1D Mark IV, Rebel T5i, Pixma PRO-100, MX472

Where is located the security file of my iphone

I've got to reinstall the itunes and now when i try to sincronize my iphone 4 everything seems ok with all the other steps except that itunes reports that he couldn't make the copy of the security file because he thinks that it is damaged or it is not form this iphone (?). He advises to remove the copy of the security file and try again.
My question is: where in the PC is located this security file that I should remove? I'm running Windows XP.

A backup of a device with a newer version of iOS cannot be retored to a device with an older version. The solution is to connect to itunes and update the new device's iOS, then perform a restore.

1st RMI implementation: where to place the security files?

Hi all!
I'm preparing my first implementation of RMI, I'm using the following example:
http://java.sun.com/docs/books/tutorial/rmi/index.html
At the moment, I have the following questions:
where I have to place the security files? (which directory with what files)
when I try "javaw rmiregistry" there is an error message (can't find main class...)I don't know why... I use the same machine for both client and server... and almoust the same path (client: "...\bin\client" and "...\bin\engine" to server)
Can you help me?
Thanks and regards! :)

1) where I have to place the security files? (which directory with what files) For the given example,
For server, filename will be = server.policy
path = should be in the classpath, for better put in folder from where you are executing.
otherwise, put the exact path in the command as (if file is in c:\:)
{noformat}java -cp c:homeannsrc;c:homeannpublic_htmlclassescompute.jar
-Djava.rmi.server.codebase=file:/c:/home/ann/public_html/classes/compute.jar
-Djava.rmi.server.hostname=zaphod.east.sun.com
-Djava.security.policy="c:\server.policy"
engine.ComputeEngineSimilary you can do for client.
{noformat}

How can I auto export a PDF File using the "Smallest File Size" preset and set the Exported File Name based on information from an Imported PDF?

Greetings all,
I am trying to create a script to automate a PDF export process for my company for inDesign. I’m fairly new to inDesign itself and have no previous experience with javascript, although I did take C++ in high school and have found it helpful in putting this code together.
We have an inDesign template file and then use the Multi-page PDF importer script to import PDF files. We then have to export two version of each file that we import, then delete the imported file and all of the pages to reset the template. This has to be done for nearly 1000 pdf files each month and is quite tedious. I’m working on automating the process as much as possible. I’ve managed to piece together code that will cleanup the file much quicker and am now trying to automate the PDF exports themselves.
The files are sent to us as “TRUGLY#####_Client” and need to be exported as “POP#####_Client_Date-Range_North/South.pdf”
For example, TRUGLY12345_Client needs to be exported as POP12345_Client_Mar01-Mar31_North and POP12345_Client_Mar01-Mar31_South.
There are two templates built into the template file for the north and south file that are toggled easily via layer visibility switches. I need to get a code that can ideally read the #s from the imported Trugly file as well as the Client and input those into variables to use when exporting. The date range is found in the same place in the top right of each pdf file. I am not sure if this can be read somehow or if it will have to be input manually. I can put North or South into the file name based on which template layer is visible.
I am not sure how to go about doing this. I did find the following code for exporting to PDF with preset but it requires me to select a preset and then type the full file name. How can I set it to automatically use the “Smallest File Size” preset without prompting me to choose and then automatically input some or preferably all of the file name automatically? (If the entire filename is possible then I don’t even want a prompt to appear so it will be fully automated!)
PDF Export Code (Originally from here: Simple PDF Export with Preset selection | IndiSnip [InDesign® Snippets]):
var myPresets = app.pdfExportPresets.everyItem().name;
myPresets.unshift("- Select Preset -");
var myWin = new Window('dialog', 'PDF Export Presets');
myWin.orientation = 'row';
with(myWin){
    myWin.sText = add('statictext', undefined, 'Select PDF Export preset:');
    myWin.myPDFExport = add('dropdownlist',undefined,undefined,{items:myPresets});
    myWin.myPDFExport.selection = 0;
    myWin.btnOK = add('button', undefined, 'OK');
myWin.center();
var myWindow = myWin.show();
if(myWindow == true && myWin.myPDFExport.selection.index != 0){
    var myPreset = app.pdfExportPresets.item(String(myWin.myPDFExport.selection));
    myFile = File(File.saveDialog("Save file with preset: " + myPreset.name,"PDF files: *.pdf"));
    if(myFile != null){
        app.activeDocument.exportFile(ExportFormat.PDF_TYPE, myFile, false, myPreset);
    }else{
        alert("No File selected");
}else{
    alert("No PDF Preset selected");
So far my code does the following:
1) Runs the Multi-Page PDF Import Script
2) Runs PDF Export Script Above
3) Toggles the Template
4) Runs #2 Again
5) Deletes the imported PDF and all pages and toggles template again.
It’s close and much better than the original process which was almost 100% manual but I’d like to remove the Preset prompt from the PDF script and have it automatically select the “Smallest File Size” preset. and then if there’s a way to have it auto-fill in the file name so no user input is required at all other than selecting each file to import. (If there’s a way to setup a batch action for the multi-import script that would be even better!)
Thanks in advance and if there’s anything else I can provide that would help please let me know! Even a nudge in the right direction will be a big help!

If you hold down the option key, it will typically show the location. Or you can often hit option-return on the file and it will reveal the file in the Finder, instead of opening it.
Final option is to open it, and just option-click the filename in the toolbar of Preview and it should show you the location.
It's probably an attachment to an email you've received. If you have Mail set to cache emails and their attachments it'll be stashed in a subdirectory of ~/Library/Mail. Which is fine.

'the preferences file is corrupt and has been reset to the default settings' - cs4 Mac

greetings!
every time i start illustrator i encounter a new error.
"the preferences file is corrupt and has been reset to the default settings."
"the corrupt file will be backed up as Adobe illustrator Prefs.err"
this problem manifested after i added some more .ai and .ase files to my swatches directory. i do not believe anything else changed.
not sure how to diagnose the problem. is there a debug mode or something? perhaps an offending file.
an option would be to try remove each added swatch file or folder individually, but this would be a very very time consuming process for me.
i use cs4 on a Macbook pro running Snow Leopard - 10.6.2 and would appreciate your advice.
thank you
-s

s,
Every time you close down Illy, the current preferences (which may have been changed while you worked on files) are saved, and every time you start up Illy, those preferences will be used.
Usually, preference corruption probably occurs randomly, caused by the OS, but if something in your files change the preferences to something that is not viable you will get an error like that.
You may press Cmd+Option+Shift during startup, which will replace the current preferences with the defaults, and probably you will get rid of the error message. It is probably not a cure, though.
If the error is persistent, the cure would be to get rid of the offending things in the files you work with.

File Error: The Specified file is open and in use by this or another app...

I have imported a string of pictures and dragged them into the FCP timeline. I render them and it renders a certain percentage then it stops and says "File Error: The Specified file is open and in use by this or another application."
After reading this, I quit out of FCP, restarted my computer, opened FCP, nothing other program, tried to render again and same thing happened. It renders part of it then the error message pops up, then I can render again and it will do another percent then it will pop again and so on.
Suggestions, or does anyone know why this happened? Thank you very much for your time.
A

okay - don't know where you've got your scratch disc set but hopefully it's to another drive other than your boot.
The same drive where your render files should be located, ie some drive other than your boot drive.
Can you copy the jpegs over to that drive into a folder.
Delete them from your tl, delete them from your proj. Save your project. Close fcp.
If they're on your boot drive - delete them.
Reopen fcp and Reimport them from the new location.
Sorry for all the steps - but we have no idea how you have configured fcp or your level of experience. Trying to cover all the bases ...

FILE ERROR: The Specified file is open and in use...

FILE ERROR: The Specified file is open and in use by this or another application.
I get this error when I import a .MOV created by Live Type. All applications, except FCP, are closed. I can reboot the computer and get the same thing. It happens when I try and "render all". Thanks.

It's probably either spotlight looking at the files, or some anti-virus program thinking your render is a virus.

Hi can any body please tell me how to open the .exe files in mac and why it is not supported with unarchiever app , also i am not able to run and dvd's in my mac its not accepting any cd's or dvd'd why do i need to do some settings for it ?

Hi can any body please tell me how to open the .exe files in mac and why it is not supported with unarchiever app , also i am not able to run and dvd's in my mac its not accepting any cd's or dvd'd why? do i need to do some pre defined settings to run the cd's and dvd's ?

A .exe file is a Windows executable. OS X does not run Windows programs. If you need to use .exe files then you will need to install Windows on your Mac:
Windows on Intel Macs
There are presently several alternatives for running Windows on Intel Macs.
Install the Apple Boot Camp software. Purchase Windows XP w/Service Pak2, Vista, or Windows 7. Follow instructions in the Boot Camp documentation on installation of Boot Camp, creating Driver CD, and installing Windows. Boot Camp enables you to boot the computer into OS X or Windows.
Parallels Desktop for Mac and Windows XP, Vista Business, Vista Ultimate, or Windows 7. Parallels is software virtualization that enables running Windows concurrently with OS X.
VM Fusionand Windows XP, Vista Business, Vista Ultimate, or Windows 7. VM Fusion is software virtualization that enables running Windows concurrently with OS X.
CrossOver which enables running many Windows applications without having to install Windows. The Windows applications can run concurrently with OS X.
VirtualBox is a new Open Source freeware virtual machine such as VM Fusion and Parallels that was developed by Solaris. It is not as fully developed for the Mac as Parallels and VM Fusion.
Note that Parallels and VM Fusion can also run other operating systems such as Linux, Unix, OS/2, Solaris, etc. There are performance differences between dual-boot systems and virtualization. The latter tend to be a little slower (not much) and do not provide the video performance of the dual-boot system. See MacTech.com's Virtualization Benchmarking for comparisons of Boot Camp, Parallels, and VM Fusion. Boot Camp is only available with Leopard or Snow Leopard. Except for Crossover and a couple of similar alternatives like DarWine you must have a valid installer disc for Windows.
You must also have an internal optical drive for installing Windows. Windows cannot be installed from an external optical drive.

Hello, I am attempting to install Camera raw from a .zip file provided via a link provided by adobe for a Nikon D810. The .zip file unzips fine and I moved the files to the recommended folder. But the operation is failing

I am attempting to install Camera raw from a .zip file provided via a link provided by adobe for a Nikon D810. The .zip file unzips fine and I moved the files to the recommended folder. But the operation is failing

Can you describe what “the operation is failing” means? What is happening and how is it different than what you expect?
Also, what product are you trying to update manually, and do you have a link to the page of instructions, so we know what your attempting to do?

HT201363 i Want To Buy a Game On The phone but the security Questions i forgot and the Email

I Have a Iphone 5c i Want To Buy a Game On The phone but the security Questions i forgot and the Email To Change Them i forgot can you please help me with the email i sent them To?
<Edited by Host>

Welcome to the user to User Technical Support Forum provided by Apple.
Please do not post personal information on a Public Forum.
I have requested the Hosts remove it for you.
For your issue...
See Here > Apple ID: Contacting Apple for help with Apple ID account security
Ask to speak with the Account Security Team...
Or Email Here > Apple Support iTunes Store Contact
More Info > Apple ID: All about Apple ID security questions
Note:
You can only set up and/or change a Rescue Email Before you forget the questions/answers.

Mail the local files as attachment and some body text

hello Exprests
I have a requirement where i have to mail the local files as attachment and some body text also...
I am using the following code, and the problem is that i am getting a blank TXT as an attachment.
Please help me solve this issue, if u change the spool request no., client & put ur mail id and execute it u will find that apart from the pdf we get an un wanted attachment also..
Please suggest me the solution..
WORK TABLE AREAS
TABLES: tsp01.
INTERNAL TABLES
DATA: lt_rec_tab LIKE STANDARD TABLE OF soos1 WITH HEADER LINE,
lt_note_text LIKE STANDARD TABLE OF soli WITH HEADER LINE,
lt_attachments LIKE STANDARD TABLE OF sood5 WITH HEADER LINE.
DATA: lt_objcont LIKE STANDARD TABLE OF soli WITH HEADER LINE,
lt_objhead LIKE STANDARD TABLE OF soli WITH HEADER LINE.
DATA: pdf_format LIKE STANDARD TABLE OF tline WITH HEADER LINE.
TYPES: BEGIN OF y_files,
file(60) TYPE c,
END OF y_files.
DATA: lt_files TYPE STANDARD TABLE OF y_files WITH HEADER LINE.
DATA: l_objcont LIKE soli OCCURS 0 WITH HEADER LINE.
DATA: l_objhead LIKE soli OCCURS 0 WITH HEADER LINE.
STRUCTURES
DATA: folder_id LIKE soodk,
object_id LIKE soodk,
link_folder_id LIKE soodk,
g_document LIKE sood4,
g_header_data LIKE sood2,
g_folmem_data LIKE sofm2,
g_header_data LIKE sood2,
g_receive_data LIKE soos6,
g_ref_document LIKE sood4,
g_new_parent LIKE soodk,
l_folder_id LIKE sofdk,
v_email(50).
DATA: hd_dat LIKE sood1.
VARIABLES
DATA: client LIKE tst01-dclient,
name LIKE tst01-dname,
objtype LIKE rststype-type,
type LIKE rststype-type.
DATA: numbytes TYPE i,
arc_idx LIKE toa_dara,
pdfspoolid LIKE tsp01-rqident,
jobname LIKE tbtcjob-jobname,
jobcount LIKE tbtcjob-jobcount,
is_otf.
DATA: outbox_flag LIKE sonv-flag VALUE 'X',
store_flag LIKE sonv-flag,
delete_flag LIKE sonv-flag,
owner LIKE soud-usrnam,
on LIKE sonv-flag VALUE 'X',
sent_to_all LIKE sonv-flag,
g_authority LIKE sofa-usracc,
w_objdes LIKE sood4-objdes.
DATA: c_file LIKE rlgrap-filename,
n_spool(6) TYPE n.
DATA: cancel.
DATA: desired_type LIKE sood-objtp,
real_type LIKE sood-objtp,
attach_type LIKE sood-objtp,
otf LIKE sood-objtp VALUE 'OTF', " SAPscript Ausgabeformat
ali LIKE sood-objtp VALUE 'ALI'. " ABAP lists
CONSTANTS
CONSTANTS: ou_fol LIKE sofh-folrg VALUE 'O',
c_objtp LIKE g_document-objtp VALUE 'RAW',
c_file_ext LIKE g_document-file_ext VALUE 'TXT'.
*=======================================================================
*=
*=========
*z_send_email_fax2
*function z_faian_mail_fax2.
""Interface local:
*" IMPORTING
*" REFERENCE(SRC_SPOOLID) LIKE TSP01-RQIDENT
*" REFERENCE(FAX_MAIL_NUMBER) TYPE SO_NAME
*" REFERENCE(HEADER_MAIL) TYPE SO_OBJ_DES
*" REFERENCE(OBJECT_TYPE) TYPE SO_ESCAPE
*" TABLES
*" LT_BODY_EMAIL STRUCTURE SOLI
*" EXCEPTIONS
*" ERR_NO_ABAP_SPOOLJOB
Fist part: Verify if the spool really exists
*select single * from tsp01 where rqident = src_spoolid.
DATA src_spoolid TYPE tsp01-rqident VALUE '23242'.
DATA header_mail TYPE so_obj_des.
DATA lt_body_email TYPE STANDARD TABLE OF soli WITH HEADER LINE.
DATA l_t VALUE '1'.
header_mail = 'Subject line of mail'.
IF l_t = '1' .
RAISE err_no_abap_spooljob. "doesn't exist
*ELSE.
client = '200'."tsp01-rqclient.
name = 'SPOOL0000023242'."tsp01-rqo1name.
CALL FUNCTION 'RSTS_GET_ATTRIBUTES'
EXPORTING
authority = 'SP01'
client = client
name = name
part = 1
IMPORTING
type = type
objtype = objtype
EXCEPTIONS
fb_error = 1
fb_rsts_other = 2
no_object = 3
no_permission = 4
OTHERS = 5.
IF objtype(3) = 'OTF'.
desired_type = otf.
ELSE.
desired_type = ali.
ENDIF.
CALL FUNCTION 'RSPO_RETURN_SPOOLJOB'
EXPORTING
rqident = src_spoolid
desired_type = desired_type
IMPORTING
real_type = real_type
TABLES
buffer = l_objcont
EXCEPTIONS
no_such_job = 14
type_no_match = 94
job_contains_no_data = 54
no_permission = 21
can_not_access = 21
read_error = 54.
IF sy-subrc EQ 0.
attach_type = real_type.
ENDIF.
CALL FUNCTION 'SO_FOLDER_ROOT_ID_GET'
EXPORTING
owner = sy-uname
region = ou_fol
IMPORTING
folder_id = l_folder_id
EXCEPTIONS
OTHERS = 5.
fill out informations about the header of the email
CLEAR: g_document.
g_document-foltp = l_folder_id-foltp.
g_document-folyr = l_folder_id-folyr.
g_document-folno = l_folder_id-folno.
g_document-objtp = c_objtp.
g_document-objdes = header_mail.
g_document-file_ext = c_file_ext.
g_header_data-objdes = header_mail.
CALL FUNCTION 'SO_DOCUMENT_REPOSITORY_MANAGER'
EXPORTING
method = 'SAVE'
office_user = sy-uname
IMPORTING
authority = g_authority
TABLES
objcont = lt_body_email
attachments = lt_attachments
CHANGING
document = g_document
header_data = g_header_data
EXCEPTIONS
OTHERS = 1.
folder_id-objtp = l_folder_id-foltp.
folder_id-objyr = l_folder_id-folyr.
folder_id-objno = l_folder_id-folno.
object_id-objtp = c_objtp.
object_id-objyr = g_document-objyr.
object_id-objno = g_document-objno.
link_folder_id-objtp = l_folder_id-foltp.
link_folder_id-objyr = l_folder_id-folyr.
link_folder_id-objno = l_folder_id-folno.
REFRESH lt_rec_tab.
CLEAR lt_rec_tab.
lt_rec_tab-sel = 'X'.
lt_rec_tab-recesc = object_type. "This field for FAX/MAIL
lt_rec_tab-recnam = 'U-'.
lt_rec_tab-deliver = 'X'.
lt_rec_tab-not_deli = 'X'.
lt_rec_tab-read = 'X'.
lt_rec_tab-mailstatus = 'E'.
lt_rec_tab-adr_name = fax_mail_number.
lt_rec_tab-sortfield = fax_mail_number.
lt_rec_tab-recextnam = fax_mail_number.
lt_rec_tab-sortclass = '5'.
APPEND lt_rec_tab.
lt_rec_tab-recextnam = ."Email id .
lt_rec_tab-recesc = 'U'. "object_type.
lt_rec_tab-sndart = 'INT'.
lt_rec_tab-sndpri = 1.
APPEND lt_rec_tab.
c_file = 'C:\Documents and Settings\abgupta\Desktop\Abhinav\zpk.txt'.
lt_files-file = c_file.
APPEND lt_files.
begin of insertion by faianf01
hd_dat-objdes = header_mail.
CALL FUNCTION 'SO_ATTACHMENT_INSERT'
EXPORTING
object_id = object_id
attach_type = attach_type
object_hd_change = hd_dat
owner = sy-uname
TABLES
objcont = l_objcont
objhead = l_objhead
EXCEPTIONS
active_user_not_exist = 35
communication_failure = 71
object_type_not_exist = 17
operation_no_authorization = 21
owner_not_exist = 22
parameter_error = 23
substitute_not_active = 31
substitute_not_defined = 32
system_failure = 72
x_error = 1000.
IF sy-subrc > 0.
ENDIF.
end of insertion by faianf01
lt_note_text-line = 'test prgram for email'.
APPEND lt_note_text.
send email from SAPOFFICE
CALL FUNCTION 'SO_OBJECT_SEND'
EXPORTING
folder_id = folder_id
object_id = object_id
outbox_flag = outbox_flag
link_folder_id = link_folder_id
owner = sy-uname
check_send_authority = 'X'
TABLES
receivers = lt_rec_tab
note_text = lt_note_text
EXCEPTIONS
active_user_not_exist = 35
communication_failure = 71
component_not_available = 1
folder_no_authorization = 5
folder_not_exist = 6
forwarder_not_exist = 8
object_no_authorization = 13
object_not_exist = 14
object_not_sent = 15
operation_no_authorization = 21
owner_not_exist = 22
parameter_error = 23
substitute_not_active = 31
substitute_not_defined = 32
system_failure = 72
too_much_receivers = 73
user_not_exist = 35.
ENDIF.
COMMIT WORK AND WAIT.

Hi!
Add the actual body right after the line, you have created the Multipart object.
// create and fill the first message part
MimeBodyPart mbp1 = new MimeBodyPart();
mbp1.setText(this.text); //body of message
Multipart mp = new MimeMultipart();
// Adding the body
mp.addBodyPart(mbp1);
//adding attachments
//... and so on...-Raine-

Flash play installation not work - The exe file deelete automaticly and the process is still running

Flash play installation not work - The exe file deelete automaticly and the process is still running

Why i get no answer?

How can my laptop access the downloaded files like mp3 and pdf documents which are in my iphone 4G?

how can my laptop access the downloaded files like mp3 and pdf documents which are in my iphone?

Yes you will need to NAT at some point to go from private to public address space. Here is a basic configuration if you are interested:
interface F8
ip nat inside
interface G0
ip nat outside
ip access-list standard NAT
permit 192.168.11.0 0.0.0.255
ip nat inside source list NAT interface G0 overload

About the bat file to start and stop the weblogic server10.3

I am using windows 2003 os.
i installed the WLS 10.3 .
can anyone help me how to write the bat file for starting and stoping the weblogic server instance.so that it willl run as background service.
I am new to this .Please suggest me
Any help is appreciated.
Thanks
Sailaja.

Hi David,
yes.i am talking about Admin server.
when i am creating the new domain,i didn't encounter any prompt asking me to run the Admin server as windows services.why i am not getting this prompt?where exactly i will get this prompt while creating domain.
i am using the weblogic 10.3
how can i make the admin server as windows services.
Thanks
Sailaja.
Edited by: sj0609 on Dec 2, 2008 4:02 PM

Regenerate the security files : SecStore.properties and SecStore.key

Similar Messages

Maybe you are looking for