Regenerating an IMG project's scope

Hi All,
is is possible to regenerate an IMG project's scope. It doesn't tell me I can't but after trying I get a popup saying "Generate the Project IMG or Customizing view in Project Management" when I try to open up the IMG project in SPRO.
regards,
Jason

Hi jason,
After ur satellite system has been connected to solution manager u can Generate an IMG Project and an IMG View from Solution manager - T code -SOLAR_PROJECT_ADMIN under system lasndscape tab and IMG projects ,once the IMG is genereated u can then view this in ur satellite system
regard
Praveen

Similar Messages

Error while creating IMG project in solar_project_admin for the CHARM maint

Dear Experts,
   I am integrating the r3 system to the charm process.
I have created the maintainenace project in SOLAR_PROJECT_ADMIN
                                           gave tha logiccal component(TMS is configured ( DEV--> QA --> PRD) .
Now when i create teh img project for this it is throwing the error as below.
*S:No authorization to:000 on as a trusted system (Trusted RC=1).
Message no. No authorization to000
\I have all the roles to my user id mapped
Trusted rfc's
S_RFC
S_RFCacl
etc......
What might be the error................??
my need to be create in the clients 000 for which i am omplementing the charm..........??
What are the roles should be given in 000 client.
Regards,
Umesh
jsumesh85 at gmail

Hi Umesh,
Please confirm your problem by as issue with the trusted system, check the link below
[Trouble trusted system|http://help.sap.com/saphelp_nw04/helpdata/en/8b/0010519daef443ab06d38d7ade26f4/content.htm]
No authorization to log on as a trusted system (trusted RC = <0 1 2 3>).
Here, the trusted return codes ( = 0, 1, 2 or 3 ) have the following meanings:
1   Calling system is not a trusted system, or security
     ID for the system is invalid.
     Solution: Create (again) the trusted system (see above).
as of in trusted system, you supposed to get the same user in both the systemm witht the respected access like S_RFCACL.
complete explanation of trusted RFCs is in note 128447.Please follow the note
Thanks
Jansi

Error while creating IMG Project in Solman

Hi Folks,
As i'm in the process of implementing Charm process in solution manager. After importing the logical components into my project ( implemention / Maintenance ) .when i'm creating the IMG project for Dev system in project administration i'm getting following error ...
S:NUMBER_GET_NEXT AEND:000 G INTERVAL_MISSING
Message no. NUMBER_GET_NEXT AEND000
But where as i'm able to create it for others like Quality and production systems.
Please let me know if any one can thorough some lights on it.
Praveen

Hi Umesh,
Please confirm your problem by as issue with the trusted system, check the link below
[Trouble trusted system|http://help.sap.com/saphelp_nw04/helpdata/en/8b/0010519daef443ab06d38d7ade26f4/content.htm]
No authorization to log on as a trusted system (trusted RC = <0 1 2 3>).
Here, the trusted return codes ( = 0, 1, 2 or 3 ) have the following meanings:
1   Calling system is not a trusted system, or security
     ID for the system is invalid.
     Solution: Create (again) the trusted system (see above).
as of in trusted system, you supposed to get the same user in both the systemm witht the respected access like S_RFCACL.
complete explanation of trusted RFCs is in note 128447.Please follow the note
Thanks
Jansi

IMG Project and Objects

Hi everybody,
I have a question concerning how to use a IMG-Project.I'm totally new with this whole SAP and Solution Manager thing.
My questions:
1. When do I use a IMG-Project in the Configuration-Folder at a Business Process Part ?
2. The effectivelly customizing things has to be in the related system or ?
3. What will I assign then to the project ?
4. What can be choosen in the Object Part ?
I hope you don't think that they are strange questions. But I'm really struggeling with that kind of Problems.
Maybe someone can explain me that on a good exemple ?
Thanks in advance !
Guersel

Hi Guersel,
1. "But was is not clear for me, can I just use Solution Manager to refer to the corresponding IMG Task ?"
Yes, you can just use Solution Manager to to perform IMG Task. You can logon SAP Solution Manager, then try the transaction SOLAR_PROJECT_ADMIN to create a new project (The interface of SOLAR_PROJECT_ADMIN is similar to SPRO_ADMIN). In the project, go to tab "System Landscape" -> "IMG Projects", here, you can link SAP Solution Manager with any of the IMG projects. (You can centrally link serveral systems here, so that all of the project work can be performend via SAP Solution Manager)
2. "So what would happen if the Solution would implementated for a new location ? Has all settings has do be done agan ? If yes, what are the benefits of Solution Manager rather then documentation ?"
SAP Solution Manager is a central tool for project admin, it provides the function called "Global Roll-out". Once your project has been finished, all of the projct documents, configuration details, test cases maintained in solution manager can be transfered to other branches. In this case, lots of works of project documentations can be saved.
You should still do the configuration in the new systems, since solution manager dosen't store the detailed customizing BC sets and programs of the satellite systems. But you still have other better options. For example, you can do an system copy from the existing production system to the new development system in other banches. Since all of the documentations are available in solution manager, you can just update the copied solution instead of a new implementation, which you can benefits from saving lots of project efforts.
Besides, there're lots of benefits:
1. if you perform the project in solution manager, SAP GO-LIVE check service is much easier, which can reduce the risk of go-live.
2. If you needs to perform Business Process Monitoring in the operation phase of this solution, that would be much easier. Since all of the core business process and KPIs have already been maintained during implementaiton.
3. Upgrade risk will be reduced. solution manager has tools to identify the core business process and calculate the upgrade risk and effort. All of the tool is free of charge. But the prerequisites are, solution documentation is maintained.
4 ..........
Regarding your fourth question, the selection pops-up, then you need to select the related tree of IMG project of this step. In the realization phase, the configuration work will only see the restricted areas of IMG tree, so that the IMG project view is related to the business steps of current configuration in solution manager.
My suggestion is that, you can check the knowledge transfer URL http://service.sap.com/rkt-solman -> SAP Solution Manager 7.0 -> click on the role of Solution Consultant on the right of new page, check the documents that you are interested.
Hope that helps,
Thanks, Jett

Before creating IMG Project in Project Adminstration

Hi,
1. In ProjectAdmin(solar_project_admin)under the system landscape tab,to create IMG Projecs for the defined landscape i have created system and logical components
is it necessary that befor doing this i need to do system configurations like - Creating server,DB,System,Logical components..
2.For SMSY RFC creation will the Solman expects to and Fro connection between satellite systems and Solution Manager.
Thanks in advance.
RGds,
Vasanth.
Message was edited by: Vasanthakumar Balasubramani

Thanks for both of you.
I could create IMG Project and it's working fine.
But when i want to delete the assigned logical component in the systems->system landscape it is not allowing to delete giving the following error
"The logical component XXXX is still being used"
If i try to delete those assigned logical systems in SMSY->logical components even then it is not allowing me to delete.
How to delete the logical componenet that has been already assigned for a project ?
Thanks in advance.
RGds,
Vasanth.

ABAP Error When Creating IMG Project

I have just installed Solution Manager 7.0 EHP1 in a Central Instance on Windows 2003 with MSSQL. Using transaction SPRO_ADMIN, I am trying to create an "Initial IMG-Project" per the Solution Manager Master Guide. But I get a runtime error. The following is the first part of the error screen. Searching the forums, it appears that note 638084 might fix this problem. Since I don't yet have the service interface working, I tried local download to PC and then Note Upload. in SNOTE, I got the error "SAP Note does not contain valid correction". Any ideas?
++++++   ERROR SCREEN FOLLOWS (truncated) ++++++++
Runtime Errors         MESSAGE_TYPE_UNKNOWN
Date and Time          21.09.2009 13:00:23
Short text
Message type " " is unknown.
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLSPROJECT_SYSTEM_LANDSCAPE" had to be terminated
because it has
come across a statement that unfortunately cannot be executed.
Edited by: Jonathan Cohen on Sep 23, 2009 3:23 PM
I uploaded and applied note #1172948. I also tried rebooting the server. But this error persists.
Edited by: Jonathan Cohen on Sep 23, 2009 3:25 PM

Anjali and Jagan,
Thank you again for all you help. I feel that I am making progress. Using RZ10, I have successfully created and activated a new "Default" profile with the following parameters added per Note
#parameter created                          by: COHENADMIN   29.09.2009 15:41:47
icm/keep_alive_timeout = 240
#parameter created                          by: COHENADMIN   29.09.2009 15:41:36
icm/conn_timeout = 20000
#parameter created                          by: COHENADMIN   29.09.2009 15:41:25
login/no_automatic_user_sapstar = 0
#parameter created                          by: COHENADMIN   29.09.2009 15:40:25
icm/server_port_1 = PROT=SMTP,PORT=25000
#parameter created                          by: COHENADMIN   29.09.2009 15:36:09
login/accept_sso2_ticket = 1
#parameter created                          by: COHENADMIN   29.09.2009 15:33:52
login/create_sso2_ticket = 2
Plus, the SID parameter is already present as :
SAPSYSTEMNAME = PD0
I restarted the SAP System using Management Console (sapmmc).
However, the Technical Configuration (step 2 of Initial Configuration in SOLMAN_SETUP) still returns the errors:
"E::000"
"System PD0 does not exist"
Any other ideas?
Thank you,
Jonathan

Delete CTS Projects not linked to IMG projects anymore?

Hello all,
I have a few CTS Projects in my Solution Manager system that I am not able to delete because the corresponding IMG projects have already been deleted. I know these CTS projects exist still, because they are all listed in the "Project" drop-down list in the Transport Organizer Web UI.
Any insights on how to do this?
Thanks,
Michele

hi,
I havent really worked upon this, but has the IMG project been delinked from SOLMAN Project list? Or has it been deleted altogether from the satellite system? Probably you can try and check in the dev system and if it still exists there, then delete the CTS project.
Regards
Sneha

IMG Project in ECC

When launching IMG objects using Solution Manager (SOLAR02) from the BPH... should an IMG Project be set up for the target ECC system? Whenever an IMG object is launched a message pops up indicating "No IMG projects found".
Any suggestions folks? We've found that the IMG objects can still be configured without this project. Should 1 be created? Remember, there is no Charm set up.
Thanks.

IMG projects are the ones whcih link your Solution Manager system with the satellite/managed system. The landscape that you have defined in the SMSY of SOLMAN, and the System landscape in the SOLMAN project..IMG project connects it with your managed system. THE IMG project that you create in Solar_Proejct_Admin as you know gets created in the development system of your landscape.
Let me know if you need more explanation/inputs.
Regards,
Sneha

Unable to Create IMG project.

hello all Solman Experts,
I have a quick question and hopefully get a quick answer too
We are investigating possible options for implementing CTS+ for our Portal Landscape.
We are on SM 7.0 and EP 7.0 2004s.
My understanding is that, the IMG Project is usually created in ABAP stack of the source system defined in the project Landscape
Our Systen Landscape configured in SMSY consists of 3 Portal instances (All JAVA stacks)
If we create a project, where will the IMG project be created?
Will it be possible to create a SM project (via SOLAR_PROJECT_ADMIN) for the portal landscape that has only java stacks?
Regards
Vijay

Hi Vijay,
its not possible to create IMG in a java only system. But you could create the IMG Project e.g. in the Solman System.
Regards
Andreas

Automatic IMG project reference to CR created from SolMan

Hi all,
i am using the implementation scenario of SolMan. i created an implementation project and related IMG project in the development system. Once stuctured my business scenarios i start to configure them in SOLAR02.
First i reference the IMG customizing tree, then i perform the customizing to the development system which is access by me from the SolMan system. when saving a transport request is required but the IMG project is not automatically assigned to my transport request. Did i miss any configuration to get this automatic step or it is not possible?
If i follow the same steps from the IMG project in the development system (without SolMan) this functionality works.
Thanks for any help
regards
Sara

Hello,
I have collected the data from our systems successfully. I have implemented the steps lsited at http://help.sap.com/saphelp_sm70ehp1_sp26/helpdata/de/45/51fbdbd4941803e10000000a1553f7/frameset.htm and it works fine.
Regards
Andreas

IMG Project

Hi everyone!
I want to implement the following scenario:
During the creation of a request in spro, field Project should be mandatory. What is more, user should have the authorization to choose only from specific IMG projects.
Any ideas?
Thank you for your help!

Hi,
Please tick the CheckBox "Restrict Change to nodes in project to assigned Team Members" under the Tab "Prj. Team Member". This will do the following
Project Node Change
If you check this box, only team members who are assigned in the 'Administration' tab can work on the nodes of a project structure. Other team members can only open the tab in display mode.
Dependencies
You need change authorization for the tab (authorization object AI_SA_TAB), for the assigned team members to be able to work in the tab.
Please award points if the answer is useful.
Regards,
Rajesh

Difference between a Solution Manager project, and IMG project.

Hello,
We are in process of installing and thereby configuring scenarios for Solman 4.
While reading about it on help.sap.com, I came across following:
<b>
"<i>The Change Tracking function of Change Request Management allows you to track everything that relates to changes within the context of a Solution Manager project, or an IMG project."</i></b>
Please help me here by clarifying difference between two.
regards, Shantanu

Hi Shantanu,
Let us assume you have captured everything w.r.to an SAP Implementation project in Solution Manager and this project has gone live. Here all details relating to an SAP Project are captured in a Solution Manager Project. Solution Manager project acts as a container to hold all the details relating to the SAP Project.
Now when this SAP Project comes in the support/maintenance phase, whenever a small change needs to be done to this SAP Solution, it will be raised as a Change Request. This change request will be captured in Solution Manager (starting from the point when the request was raised from an end user as a support message, which eventually might have evolved as a Change Request). All details about this change request, its approval workflow, task control being transferred to different roles(people), movement of the request along the transport path, everything is captured and controlled in the Solution Manager Project.
So, we are clear about Solution Manager Project now.
What is an IMG Project?
For each and every component involved in this SAP project, an IMG project will be created with the same name as the Solution Manager Project in the component systems. These IMG projects in the Satellite systems are the same as the normal Project IMGs which we use in any SAP Project to hold all details relating to an SAP Project w.r.to that component.
In the context specified by you, it has been told that any changes w.r.to a Solution Manager project or an IMG project can be tracked in CHARM. It is because any change that is requested w.r.to any component(say SRM or ECC) will result in a change in the details captured in Solution Manager project about that SAP Project, and also will result in a change in the details captured in the appropriate Project IMG (say SRM or ECC).
Hope it is clear.
Dont forget to reward points for useful answers.
best regds,
Alagammai.

Locking of transports with IMG projects

Hi!
I would like to know whether it is possible to lock all the transports from DEV to QAS system that are not belonging to some IMG projects?
Thank you very much!
regards

Hi Thom Heinemann,
I am not sure about locking the system for specific transports. You can do that if you are using any thired party tool / z program to perform imports other than STMS into quality system. With the help of STMS transaction code > over view > systems > select the system press F9 like this, we can make the system not to accept imports.... i mean we can lock the system.
Regards,
S.Manu.

Difference between SAP Reference IMG & Project IMG...

Hi SAP Gurus,
Can anyone explain me about the difference between
SAP Reference IMG & Project IMG...
Thanks in advance,
Praveen.

Hi !
The SAP Reference IMG contains alle the customizing functionallity of SAP.
Within a Project IMG you can restrict the availible customizing function.
Thinking about having an MM project. When you create an "MM" Project IMG you will only "see" MM relevant customizing functions in your project IMG.
Regards
Rainer
Some points would be nice if that helped.

Transporting SPRO img project documentation

Hi,
We have a system config client copied from another system.
We currently have a requirement to transport all SAP SPRO project documentation from source system to another without a system export.
We were able to transport the project with the meta data and have the configuration.We now require the related sapscript notes that relates to the specific IMG configuration settings.
Please can you advise how to get this documentation over to the new system?
Kind Regards

Hi,
Please check the below link it might help you :
http://help.sap.com/erp2005_ehp_04/helpdata/EN/81/8c5738ee806b0ee10000009b38f889/frameset.htm
Regards
Sreedhar Reddy

Regenerating an IMG project's scope

Similar Messages

Maybe you are looking for