Region Code Update from ECC to SCM

Hi Experts,
May I kindly ask if there is a way to transfer/update the regional codes of plants from ECC to APO?
Hoping for your help.
Thanks. Sincerely,
Ria

Hi Ria,
You may update/check a certain region in SCM also via..
SAP IMG > SAP Netweaver > General Settings > Set Countries > Insert regions
...same the ones in ECC.
Cheers!

Similar Messages

  • Material Updates from ECC to CRM

    Hi Experts,
    We recently had application of Enhancement Pack4 on our ECC system. After the application EHP4 pack, we have started getting some material updates from ECC to CRM. And those updates are failing in CRM as we do not have any material set up in CRM. Due to these failed updates, lot of dumps are getting created in CRM. So can u please advice where/how in ECC i can restrict these updates to go to CRM. Any help in this will be highly appreciable.
    Regards
    Charitha

    Hello Charitha,
    In txnn:R3AC4 of CRM , check INACTIVE flag for object MATERIAL (and any other objects whose data is not required in CRM)
    for your RFC destination (ECC).
    This would prevent any automatic data flow for this object from R/3 to CRM.
    Hope this helps!
    Best Regards,
    Shanthala Kudva.

  • How to Post Idoc's from ECC to SCM

    Dear Friends,
    This is Shalini Shah.
    how to post the Idoc(MATMAS05)
    from ECC to SCM-APO.
    please give me the details on this topic.
    Regards,
    ShaliniShah

    Please see the Wiki page details mentioned in this [sticky|Wiki page for SCM-APO; thread at the beginning of the forum.
    Refer to the [CIF|https://wiki.sdn.sap.com/wiki/display/SCM/CIF] Wiki page for details on setting up and using CIF. I am not aware of the IDOC details but if it material master (as SB has mentioned) then your best option of transferring the master data from ECC to SCM / APO will be to use the CIF.
    After intial CIF settings are maintained (see details inthe CIF Wiki page) you will need to create Integration Models and activate them for transferring the data.
    Somnath

  • Transport of Global Parameters from ECC to SCM

    We have tried to set up RSA1 in our SCM development systems for both F&R and EWM to allow us to transfer calendars, UOMs etc from ECC to these systems but have hit a couple of snags...
    We have the following system/client structures for the F&R SCM system:
    Development                    Quality Assur.                  Production
    DF0 260 (Golden)                 QF0 360                              PF0 960
    DF0 261 (Unit Test)
    DF0 262 (Perf. Test)
    And for BI we have:
    DB0 120                                QB0 220                             PB0 920
    For the QA and Production instances, we do not have an issue, since the limitation of having only one BI client per system doesn't matter as we only have one client to connect.
    But for the Development systems, currently it is the DF0 261 client that is connected to the DB0 120 BI client. We want to be able to pull the data from our ECC golden client (DE2 700) into each of the DF0 clients. But when we try and run RSA1 in any other client than 261, we get an error telling us that only one client can connect to BI and we must work in that client.
    I thought we could maybe get around it by simply running report RSIMPCUST in a batch job, but cannot see how to save a variant with the source client name in it since this is always greyed out when you run it online. I guess if I maintain the BI system as the default client for each of these F&R systems in SCC4 it might work, but I don't know what else uses this default client value?
    Does anyone know of any workarounds for this? It would be really nice to be able to synchronize all systems (especially as the link is between two non-BI systems, so the BI restriction should not even apply). If we have to go back to the current approach of manually updating the development systems for any changes in ECC then we may as well use that for all clients and just transport the changes. It is not a good solution though...
    Thanks,
    Luke

    there is some explanation to what you have mentioned in Re: Factory Calendar
    this talks about calendars and is relevant till SCM 4.x
    I would imagine the situation would be the same for UOM
    In SCM 5 you have the option to update the tables, Rebuild the tables and also a simulation option

  • Error while transferring SALES ORDER from ECC to SCM

    Hi Experts,
          I am working with SCM4.0 and ECC 5, while i transferring the sales order from ECC5 to SCM ,it encounters with the following errore message.
    <b>Sales order M-10 1000: Integration model does not contain material master
    Message no. XC100
    Diagnosis
    To ensure a consistent dataset in SAP APO, the material master data for filter object Sales order M-10 1000 also has to be known in SAP APO. In the current case no entry was found for the combination   in the models that were checked.
    System response
    Object Sales order M-10 1000 cannot be transferred correctly.</b>
    Any kind of suggestions would be appreciated well.
    Thanks in advance..
    Regards,
    A.Fahrudeen

    Hi Fahrudeen ,
    I hope the master Data like Material and Location and Customer are not CIFed to APO prior to Sales order or else while ciffing the sales order you have not selected the sales order radio button and same time only enter the Material ,location and customer wothout the tick on filter objects for Mat/Loc and Cust.
    Hope this helps..
    Regds// Digs...

  • Changes are not updated from ECC to CRM How to debug

    Hi,
    QCs 1140049726  and 1140047459 were updated in P20 system to remove the WBS.  This was done per normal P20 process and instructions.  P20 system correctly reflects that QCs have no WBS value and the contracts are BOX - all is correct in P20.
    CSP still shows these QCs as having a WBS assigned to them.  This is incorrect.  It has been over 24 hours since the P20 QCs were changed to reflect no WBS, but CSP still has not been replicated with the correct data.
    How to proceed with it. How to debug from ECC to CRM.
    Prem.

    Hello Prem,
    Could you please have a look at SAP note 656823?
    This note contains debug tips for btx data transfer. Please check point 6 which talks about the delta download.
    Hope this could be helpful.
    Best regards,
    Maggie

  • Sales document created from CRM 4.0 needs to be updated from ECC 6.0

    Hello experts,
    When I create one sales document from CRM 4.0 this document is moved to ECC 6.0. But updating sales document from ECC 6.0 I receive message
                 "Process the original document in the CRM system"
    and updates are not moved to CRM.
    How could I avoid this ?
    Usually I need update some fields from ECC 6.0 and move the information to CRM.
    Regards
    Juan

    Hi Juan,
    Please check the Note 541113 - Data exchange scenarios for orders (CRM-R/3) in which as per your requirement its the scenario Z i.e you want some data to flow from ECC to CRM for which below are the settings that needs to be done to make it effective.
    Activation of the scenario in table CRMPAROLTP of the R/3 plug-in:
    PARNAME:   CRM_SCENARIO
    PARNAME2:  UPLOAD_ORDER
    PARVAL1:   Z
    Go to SM30 and give the table name and put in the above values.
    And if you want to make amutual change situation then proceed as follows:
    Settings in the CRM Server: Table SMOFPARSFA
               Key: R3A_SALES
               Parameter Name 1: INT_CHANGE_ORDER
               Parameter Name 2: <sales document type> , for example TA
               Parameter Value 1: Z
    Settings in the R/3 system: table CRMPAROLTP
               Parameter Name: CRM_SCENARIO
               Parameter Name 2: INT_CHANGE_ORDER
               Parameter Name 3: <sales document type> , for example TA
               Parameter Value: Z
    Hope it helps.
    Regards
    Sidd

  • Drive Region Code different from iBook to PowerBook??

    I am visiting Germany from America and i have a Powerbook G4 and my girlfriend has a iBook which we purchased at the same time (before X-Mas) in america. now i know about drive region code settings and their purpose (although i dont undestand why they cant be changed as many times as needed, only 5), but my powerbook prompts me to change it when i input a German DVD and my girlfriends plays them no questions asked?? what is the deal there?? thanks

    Hey Mike,
    glad you got it figured out
    You can download VLC from here:
    VLC Media Player
    This article might also be helpful for you:
    Region Free DVD Playback with VLC

  • Problems if code copied from ecc 6.0 to ecc 4.7

    HI Experts,
        If i copy code from ecc 6.0 to ecc 4.7 any problems will arise. like function modules not exist. Please let me know the basic problems which i can face if i do this copy from 6.0 to 4.7.
    Thanks.

    why don't you just test it? Copy it over and do a syntax check.
    If there was no difference then SAP would not need to provide different releases.
    Of course there are function modules in current system which were not written when 4.7 was launched at the market. When we implemented ECC6 we upgraded as well to Unicode which forced us to change coding in old programs.
    There are ABAP commands which have not been there at 4.7 times.
    You can't get a clean bill of health for such generic question, you can just test it, and if there is trouble then you need to fix it to make it run.
    If you have read some OSS notes for new developed functionality then you could know how rarely SAP offers the option to implement such function in a lower releases. 

  • RFC call from ECC to SCM -- Debug Steps required

    Hello,
    The steps being done for this issue is:-
    1) In ECC system ,CN22 Transaction Code (Change Networks) --> Click on Schedule (at the Header) and click on SAVE
    2) This seems to trigger an RFC call to SCM server (as per the trace log).
    3) From SCM, it comes back to ECC server as User 'BATCHRFC'. This has been defined in SM59 correctly.
    4) BATCHRFC in ECC system calls an RFC FM 'CIF_PJ_INBOUND' and changed the status of networks to DSEX (date set by External system)
    We are trying to understand why is the RFC call being made? I can debug the FM in ECC when an external breakpoint is used.
    However, I want to know where in ECC is the RFC call made (to SCM), and how? How can I control it as we do not want this to happen? How can I debug to understand how an RFC call is made?
    Your views would be appreciated.
    Regards,
    Sanjiv

    Hi,
        What you do is, enter the Tcode, CN22, then in Command window activate debugger by entering /H
    It takes u to debugger, from menu > utilities set a break point at Satetment Call Function, it will stop at all the Function modules in debugger, so you can look for the RFC FM in the program where it is called.
    And also look for setting in debugger, may be u have some options for RFC FM.
    Regards
    Bala Krishna

  • System Status Vs User Status updates from ECC to CRM

    Hi Frnds,
        Am facing a problem in Status Management , We have ECC as Backend , When ever we save the order in CRM it is Relicated to ECC thrgh CRM Middleware.
       (I) I have created User Status 'Z' Status Profile in CRM and Assigned that Profile to Status Triggering Business Transaction and to the Transaction Type.
              I have assigned this Status to INProcess and Released , with my 'Z' Status.
    I have Maintained the Same User Status Profile in ECC also.
    My questions are
    1) How can i Maintain the System Status with User Status in ECC (For example in CRM we maintain thrgh Business Transaction ,last field in Status Profile.) ?
    2)When ever i change the status in ECC that Status as to be update in the CRM?
            But here Order in CRM is not updated , For example , if i change the status to "COMPLETED" in ECC ,the Status "COMPLETED" is not triggered in CRM.  
            Here i need write a BadI or is there any Config settings that i need to Mainatain ??? or anything different approach ??
       Helpful Answer will be Rewarded with Points .
    Thanks in Advance
    Reagards
    Ram

    Hello Charitha,
    In txnn:R3AC4 of CRM , check INACTIVE flag for object MATERIAL (and any other objects whose data is not required in CRM)
    for your RFC destination (ECC).
    This would prevent any automatic data flow for this object from R/3 to CRM.
    Hope this helps!
    Best Regards,
    Shanthala Kudva.

  • Vendor deletion/Block update from ECC to SNC

    Hi
    When vendor is blocked or deletion flag is set, and after that when vendor is CIFe'd to SNC, is the status in SNC get updated.
    We have an issue that after CIF status of vendor still PO are able to be confirmed on SNC side?
    Is somebody having cllue on this, pl reply?
    Thanks
    Vipin

    Hi Vipin
    Once you have set the blocking indicator in the vendor master record, purchase orders can no longer be placed with this vendor
    It will not allow you to create new PO with this vendor in SAP ERP
    is the status in SNC get updated?
    Yes , in location master, general tab of supplier (/n/sapapo/loc3)
    The section Vendor, Central Purch. Block filed is checked or if it is deleted, deletion flag will be set.
    We have an issue that after CIF status of vendor still PO are able to be confirmed on SNC side?
    Yes for the orders which were created b4 blocking vendor can be still processed on SNC side
    If you dont want that vendor to confirm, please block the user.
    Regards
    Vinod

  • Type incompatible while activating in ECC 6.0 after updating from ECC 4.6

    <b>Error : VGARTI-DB and VGARTP are type-incompatible in DO...Varying..loop</b>
    DATA: BEGIN OF VGARTP,              " Vorgangsparameter
            VGART LIKE TM07I-VGART,    " char  2
            XHINZ LIKE TM07I-XHINZ,        " char  1
            XZAEL LIKE TM07I-XZAEL,      " char  1
            XDIFF LIKE TM07I-XDIFF,        " char  1
            XNACH LIKE TM07I-XNACH,    " char  1
          END OF VGARTP.
    DATA: BEGIN OF VGARTI,              " Aktionen zur Vorgangsart   " Changed for unicode compatibility
            DB(6) TYPE C VALUE 'DB  X ',
            IB(6) TYPE C VALUE 'IBX   ',
            ID(6) TYPE C VALUE 'IDXXX ',
            IN(6) TYPE C VALUE 'INX  X',
            IZ(6) TYPE C VALUE 'IZXX  ',
            ZB(6) TYPE C VALUE 'ZB XX ',
            ZE(6) TYPE C VALUE 'ZE X  ',
            ZL(6) TYPE C VALUE 'ZL X  ',
            Z$(6) TYPE C VALUE '$$$$$$',
          END OF VGARTI.
      DO ANZ-SEGM TIMES VARYING VGARTP FROM VGARTI-DB NEXT VGARTI-IB.
        IF VGARTP(2) = T158I-VGART.
          EXIT.
        ENDIF.
        IF VGARTP = VGARTI-Z$.
          MESSAGE E001 WITH SPACE SPACE SPACE 'VGARTI'.
        ENDIF.
      ENDDO.

    Shouldn't the variable you are "varying" be the same length / type as the "from" and "to" i.e. more like (from SAP help):
    DATA: BEGIN OF TEXT,
            WORD1(4) VALUE 'This',
            WORD2(4) VALUE 'is',
            WORD3(4) VALUE 'a',
            WORD4(4) VALUE 'loop',
          END OF TEXT.
    DATA: STRING1(4), STRING2(4).
    DO 4 TIMES VARYING STRING1 FROM TEXT-WORD1 NEXT TEXT-WORD2.
      WRITE STRING1.
      IF STRING1 = 'is'.
        STRING1 = 'was'.
      ENDIF.
    ENDDO.

  • Vendor Sync Job not updating all vendors from ECC to SRM

    The vendors are updated from ECC to SRM by batch job
    Z_SUP_BAT_VENDORSYNC (object BBP_VENDOR_SYNC).
    This job is missing updation of some vendors from ECC to SRM.
    Its happening on and of.We are updating these leftout vendors manually by TCODE BBPUPDVD and new left out vendors by BBPGETVD.
    We have concluded that information in these vendors is replicated from
    ECC to SRM GUI but it is not reflecting in SRM portal.
    Reasons looks like when vendor data(Incoterms/Payment terms) is replicated from ECC to SRM an
    addition row is created in vendor data in SRM which does have this information(Tcode ;BBPMAININT).
    Though the information is present in second row in vendor data tab of vendor information when executed using TCODE BBPMAININT but Vendor information in portal is picked from 1st row and does not appear when try to shop.
    Can anyone suggest how to resolve this?

    Hi Harleen,
    The problem is because of the inconsistency in the tables BBPM_BUT_FRG0060 and BBPM_BUT_FRG0061.
    From table BUT000 take the partner guid for the problematic vendor.
    Enter the partner guid as input to the table BBPM_BUT_FRG0060  . check the number of available rows.
    Now check the table BBPM_BUT_FRG0061 with the partner guid. check the number of rows.
    You must see the inconsistent number of records in these 2 tables for the partner, like 1 row in BBPM_BUT_FRG0060  and 2 rows in BBPM_BUT_FRG0061.
    Delete the invalid row in the table BBPM_BUT_FRG0061. That should resolve the problem you are facing.
    Regards,
    Sapna

  • Region Code Error while replicating locations from backend.

    Hi,
    While executing the program BBP_GET_LOCATIONS_ALL we got error as region XX not defined for country IN (India). This error is for all regions in the log.
    We suppose this was because the standard regions codes(States) in ECC backend and SRM are mismatch. For eg. Region Code for Maharashtra is "13" in SRM whereas it is "MAH" in ECC.
    Is our assumption correct. What could be the possible solution to resolve this issue?
    Immediate responce will be higly appreciated.
    Thanks
    Hussain

    Hi. Just change the config in SRM to match ECC.
    It is almost the same IMG path in the 2 systems.
    In SRM it is SAP Web Application Server > General Settings > Set Countries > Insert Regions.
    You can also set up a distribution model to automatically syncronise the config or you could go to Utilities > Comparison in the config in SRM then select your ECC system as the logical destination and it will syncronise as a one off for you.
    Regards,
    Dave.

Maybe you are looking for