Region content preview ?

Yes, i'm busy for a new poster, but i just wanted to ask if this was possible.
Ive been using Logic for many years but never been able to find out how to change the region contents preview from notation to piano roll, so that my midi regions show a piano roll style preview instead of the regular musical notation, when in the arrange window.
Ive been told on here that this is possible, but i'm pretty sure it's not.
Please help.

X-man,
I see... Well, there is no option that controls the behavior of what's displayed. The behavior is to show notes when the zoom level is sufficient to display that. If you're zoomed out far enough you see nothing.
Would be a nice option to have tho.
-=iS=-

Similar Messages

  • "view content preview in thumbnails" option is not available in view settings for "finder" for one user

    "view content preview in thumbnails" option is not available in view settings for "finder" for one user

    I hope this discussion can be revived. I have the same problem. There seem to be quite a few Japanese sites that don't bother specifying their encoding. Perhaps they are older and from a time when it was not necessary to adhere to standards. Examples: http://www1.plala.or.jp/CUE/cave_yozawa.html, http://chigaku.web.fc2.com/saitama/sanchi/youzawa/youzawa.html. Happy to upload screenshots, but how?
    Is there a way to tell Safari what encoding to use if the web page fails to do that?

  • Items above/below region content

    Hello ApEx development team,
    What happened with this enhancement:
    Items above/below region content
    I think, this limitation is annoying and needs to be removed. It takes to much unnecessary
    workaround to overcome such a trivial problem.
    Best regards,
    Denes Kubicek
    http://deneskubicek.blogspot.com/
    http://www.opal-consulting.de/training
    http://htmldb.oracle.com/pls/otn/f?p=31517:1
    -------------------------------------------------------------------

    Hi,
    Yes, that would be an excellent enhancement!
    I was just struggling with getting a "Display as" item (showing the total of the report) under a report. There was no way, it always displayed above the report, even with "Horizontal / Vertical Alignment: right bottom".
    This post made me try to move the region from "Display Point: Page Template Body (3)" to "Display Point: Page Template Body (2)". Now it works fine...
    Vikas' proposal:
    Yes, I had brought this up more than a year ago. This would allow us to use a WYSIWYG HTML editor to design a region template with #ITEM_NAME# substitutions in it and items with those names would be plopped into those positions.
    ...would be great indeed!
    Regards,
    Roger

  • Items above region content

    Hi,
    How can I customize "Page Template Region 5" to show the "items" above the region?
    I want to customize this region something like "Page Template Body (3. items above region content)".
    Thanks in advance.
    Balaji Chellappa

    No
    "Page Template Body (3. items above region content)". was the only option.
    Alternatively you can create a blank region just above the region and can keep the buttons over there. Its the ugly idea but it works.

  • Region Content Properties

    In the content area page style -> folder layout tab -> region properties -> region content properties -> how do the "In Place Item Display" and "Associated Functions" settings affect the region, what is their purpose and when should they be used. I could not find any documentation. Thanks for your help.

    The sort order only applies to the Sort By property, not the
    Group By property.
    Regards,
    Jerry

  • View Region Content

    ....Anyone knows where is the View Region Content command ????
    ( Manual says in view .....but no voice for...)
    Thanks...
    Anton

    ..because when i am working on 20 minutes cues using approx 40 midi tracks i want to see all events from arrange view. Like previous version.
    A

  • Content Preview - portal

    Hi All,
    I am developing corporate site using weblogic portal 10.2 and MySql5.0
    This site requires most of the content management opreations.
    Custom Workflow is associated with content.
    Assume a content is created by the creator , it should be aproved by manager.
    How a manager can preview the content/page, before aproval.
    Means , how "Content Preview" can be achieved using admin portal.
    Srinivas

    Not knowing the extent in what the new workflow does, the quick and dirty way would be to add an attribute to your content that was called approved(or a status)... and change all your prod content selectors, code , etc to make sure that flag is set to approved=yes before it shows it on the production site... On the flip side you would have to create code that would show the content in process(approved=no)... There might be a better/easier way with the new workflow that WLP offers but again this would be a quick and dirty way if not...

  • Problem Adobe ID in Digital Content Preview Tool for *.issue from InDesign

    Hi,
    I hope it is the right place for this post.
    So, I create a *.issue file with InDesign and the new Digital Publishing.
    Then I installed the Digital Content Preview Tool on the iPad and I have tryed login with Adobe ID to test the *.issue file.
    But login inside the iPad app has been failing by all the day...
    (ps: login from web browser goes well).
    Someone can help me?
    Thanks in advance,
    leleguera

    Thanks Bob!
    I'm going to try your solution.
    I have found the related post:
    http://forums.adobe.com/thread/742850?tstart=0

  • Diplaying region content based on multiple selection lists

    Hi,
    I have 3 select list on submit(P1A, P1B, P1C). And i have 3 report regions.
    now this is the scenario. the 3 select lists are on submit.
    the P1C is a dynamic list which shows contents based on the selection from P1A and/or P1B. so this is how my P1C LOV looks like
    SELECT DISTINCT COLLECTION d, COLLECTION v
    FROM viewvs
    WHERE (YEAR =   :P1A  OR  :P1A= '-1' )
    AND   (SEASON =  :P1B  OR  :P1B= '-1' )
    ORDER BY d i also have a 3 report regions which display result based on P1C selection.
    now when i select P1C then i am able to see the 3 regions. and when i go back and change P1A and/or P1B, then P1C changes output. and the 3 regions should not show any data unless i again select one from P1C but, the 3 regions still hold on to the previous data.
    what i am trying to say is, when the regions should display data only when P1C is selected, and when any of P1A or P1B is changed the regions should disappear and should not display any data, but instead the 3 regions show the previous data unless a new selection is done.
    How can i clear the report region when everytime a new value is selected from P1A and/or P1B.
    also the below is part of what i have entered in the report regions
    IF :P1C != 'NULL' THEN
    --DISPLAY THESE VALUES
    END IF;---------
    this is what i found the latest. whats happeneing is
    when i select listA, listB-- listC gets populated and when i select from listC based on that value which gets stored in session state, report regions get displayed
    but when i go back and change selection in listA, listB
    by default listC session value should go to NULL, and only after i make a new selection, then with this new session value for listC, the report regions get displayed.
    but when i checked the session value for listC, it still remains the same old value from the previous selection, because i haven't nade new selection and thats why the report regions are still showing the old result.
    so how can i remove this session value for listC after displaying the report results.
    Thanks,
    Philip.
    Message was edited by:
    [email protected]

    There is nothing wrong with your code, so I'd look elsewhere for the problem. Is this a direct copy of what you have on your page?
    :P1_COMBO1 in ('Option 1', 'Option 2')
    And
    :P1_COMBO2 = 'Option Combo 2'And the page item values are exactly as you have in the quoted strings? You might run the page in debug and confirm the page item values are exact.
    Edited by: Bob37 on Dec 6, 2011 2:18 PM

  • Content preview question

    Hi,
    We are using Content Management in Portal 9.2.1. We have written our code for content creation, workflow approval, deletion of content using CMS API and controls.
    Our process is
    1. Content creator logs in and creates content (workflow status = Ready)
    2. Content approver logs in and previews the content and publishes (workflow status from Ready to Published)
    3. Content selectors displays the published content
    We have problem at step 2, when the approver logs in and tries to preview the content, we got the following error message.
    <Jul 18, 2007 10:40:32 AM IST> <Error> <ContentManagement> <000000> <
    com.bea.content.RepositoryException: Either a Primary Property is not defined fo
    r Node: /BEA Repository/Images/homeImage or the node has not been published.
    at com.bea.content.manager.servlets.ShowPropertyServlet.printNode(ShowPr
    opertyServlet.java:294)
    at com.bea.content.manager.servlets.ShowPropertyServlet.doPost(ShowPrope
    rtyServlet.java:117)
    at com.bea.content.manager.servlets.ShowPropertyServlet.doGet(ShowProper
    tyServlet.java:104)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:743)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
    Truncated. see log file for complete stacktrace
    Can we use the cm:getNode to preview the content or do we have to write CMS API code to get content?. Both are same?.
    Can we preview a un published draft status content?. We assumed it will be possible as from administration console, we can able to do this.
    Someone please help us.
    Thanks
    bharat

    Hi
    im not that familiar with 9.2 CMS but i believe you do need to use the API's
    This might work for you
    //id = ID of node
    //getContext() returns ContentContext
    IVersionManager vm = ContentManagerFactory.getVersionManager();
    VirtualNode vNode = vm.getNode(getContext(), id);
    Version ver = vNode.getCurrentVersion();
    //replace with the name of your property
    Property prop = ver.getProperty("Body");
    InputStream is = vm.getStream(getContext(),id, prop.getId());
    ..use stream
    is.close();
    //read the docs on retrieving stream in context of transactions
    HTH
    deepak

  • Content previews disappearing

    I'm using CS4, windows XP.
    As I began to use Bridge, my files in the Content window were shown as icons, so I could see the content of the file. Now, in the past week or so, as I save the files after changing them, I am only getting the InDesign logo instead of the small preview of the file. I did not change anything in my preferences, although I think there may have been some kind of Adboe update perhaps (?) as I also now have changes to the interaction with my printer (work-around found here).
    Has anyone else had this happen and have you found a way to fix it?
    Not a big deal, but it is a bit annoying.
    thanks!

    I would lpurge the cache in the problem folder (tools/cache) and see if that works.  May have a contaminated thumb.

  • Content previews missing....

    Hi
    we missing the previews of our content in iBA.
    Is there something we do wrong?
    After we export the iBook they are there.  ??????
    Thanx Andreas

    If you mean the thumbnails at the bottom of your TOC pages....  they do not show in iBA
    Preview in iBooks on your Mac and using the top menu...select "thumbnails" and your content pages show.
    Its all normal, don't worry.

  • Interaction on Windows 8//content preview

    Hi,
    we would like to create an applikation that runs on Windows 8, on a Sony Vaio tap 20.
    For this we already prototyped in Indesign, including panorama, buttons, links, pan and tilt and in generally all interactive elements.
    Is there a way to export for Windows 8? either as an App (Adobe announced in July) or in worth case as a swf or html5 (but will these be able to include all interactive elements), or even pdf?
    second: how can I preview my applikation on mac? the adobe content viewer did not interacted well. For example the pan and tillt did not work.
    many thanks,
    Kitz

    There is a beta version of the Adobe Content Viewer available in the Windows
    Store but it is Windows 8.1 only and is clearly a beta viewer. Many overlay
    features are not yet supported.
    If indeed this is a DPS issue please post follow up inquires in the DPS
    forum. If it's not about DPS you're going to need to clarify what you're
    doing.

  • Export - region content (file)

    Hi,
    How do I export the contents of a region (files) to another table outside the Oracle portal?
    tks
    Carlo

    Works fine here... no problems at all.
    Have you tried this in a different song? It may be something with this one Logic file... unless you can duplicate it in another song.
    As an alternative, I would suggest you simply export the whole track.

  • Adding Description or Content Preview to Search Result Web Part

    Hello,
    I am on Sharepoint Online 2013 working on an enterprise wiki site. I've added a search result web part and configured a query to return the results I want. The
    Results Control Display Template is set to Default and the
    Result type for item is set to Sharepoint Wiki.
    Is there a way to
    1) Customize the item display template to add in a description value, or show the first 'x' number of characters from the content?
    2) Customize the hover display to show only the body content (instead of complete page), or increase the zoom level where the content area is shown larger?
    Any help would be greatly appreciated.
    I had images to attach but will have to attach them later as I cannot until my account is verified.

    Hi
    Check this
    http://blogs.technet.com/b/tothesharepoint/archive/2013/09/05/understand-how-item-display-templates-and-hit-highlighting-work-in-sharepoint-server-2013.aspx
    http://blogs.technet.com/b/tothesharepoint/archive/2013/09/17/how-to-display-values-from-custom-managed-properties-in-the-hover-panel-in-sharepoint-server-2013.aspx
    http://blogs.technet.com/b/tothesharepoint/archive/2013/09/03/how-to-change-the-way-search-results-are-displayed-in-sharepoint-server-2013.aspx
    Please remember to click 'Mark as Answer' on the answer if it helps you

Maybe you are looking for