Region Field in COPA

Hi,
Requirement is to bring in Region Field in COPA..
The Region field is available in Customer Master data.. so the relevant tables involved are:
KNA1 - Customer, Address key
ADRC - Address key, Region
Check table: T005U
Now, how do we create a COPA characteristic Region and what should be the derivation rules..
Please suggest..

HI,
KEDR (Derivation)->Table lookup on table KNA1.
Source
KNA1-KUNNR = CO-PA-KUDNR (system proposes)
Target
KNA1-REGIO = CO-PA-WWREG (your region Characteristic in CO-PA).
When Region field available n populated in KNA1, you don't need ADRC table.
Hope this helps.

Similar Messages

  • State (Region) Derivation in COPA

    HI,
    I currenlty have the COPA derviation for State (Region) mapped to KNNR, based on the Customer number (KNA1) and the Region Field (Regio).  I feel this is incorrect becusae while the sales team changes the ship to address for the customer, it will not reflect this in COPA.  does anyone know what the correct mapping should be?  I asked the SD guy and he is not sure. 
    Thanks,
    Rashad

    Hi,
    the SAP standard customer in CO-PA characteristic KUNNR is the sold-to-party customer. So if you want to derive another SD partner role (ship-to-party, payer,...) follow SAPNET note 36557. Once the ship-to-party customer is derived you can derive state (or anything else) in the same way as its done for the sold-to-party customer.
    Best regards, Christian

  • Transporting New Value Fields in COPA

    Hi All,
    I have created new value fields in COPA and regenerated the Op Concern in Dev. I need help to transport them to Quality and then to Production.
    Basically I need help on the Objects I need to select and pre-cautions I need to take.
    Appreciate your help on this.
    Thanks.
    Sree

    HI sree,
    ofter creation value field and saving that time reqwest number appeare copy the reqwest number and go through the se01 select that reqwest number select and transport click the truck symbole, and draft a mail to basis guyw.
    Thank You!
    Best Regards,
    pradheep.

  • User defined field in SD and its link to Value field in COPA (??)

    Dear All,
    We have created one "Z" field i.e. user defined field and its in VBRP Table. This is a quantity field. to update the values in this field we have used an exit in sales and distribution module. Now, by defining this exit values are correctly populated in VPRP table on line item basis.
    Requirement here is we need to get this field in COPA, for same i have carried out the quantity field assignment to value field (KE4M).
    Even after this configuration profitability segment is not updated.
    Regards,
    Sayujya
    Edited by: sayu on Mar 15, 2010 10:13 AM

    In the past I did something similar and had to use function module EXIT_SAPLKEAB_001 in enhancement COPA0002 to populate the field.  To use this exit you'll first need to add a user exit id to your valuation strategy (transaction KE4U).  The help on the function module is pretty good, but if you run into a problem let me know.
    thanks,

  • Assign direct material cost to value field in copa while issue to Prod orde

    Dear All,
    My requirement is like this:
    There are some 16 material groups from A to P each containing some materials(finished goods).
    I want to allocate overhead to different material groups(Charecteristic in copa) in COPA using the periodic assesment cycles. I am able to allocate overhead(admin & sales cost) to different value fields in copa from different cost centers.
    I want to analyse the product cost and also the profitability of each material group in COPA using Report painter. Iam able to pull all the costs which i assign to value fields using assessment. But, i am NOT able to get the direct material cost which is issued to production orders using BOM.
    My question is whether we can assign the direct material cost to any user defined value field(material cost value field) while the material is being issued to production orders. Is there any automated way where we can directly assign the direct material cost to value field in copa while issuing the material to Production orders.
    Pls explain me whether we can do it. if yes how?
    Thank you very much in advance.
    Regards,
    Vishnu
    VST-IT.

    PA is a Profitability analysis tool. That means it gets updated when a sale is made, not before. (Except for settlements and assessment of overheads.)
    Goods issues for production gets updated in CO-PC, and needs to be analysed there. If you don't, you loose all the inbuilt tools for variance analysis, cost estimate comparisons, Wip Calculation etc. To the best of my knowledge, a Profitability Segment cannot be used as a cost object in Production Planning, because amongst others, you need to be able to capitalise the produced materials to stock at the end of the production run, or to WIP at the end of the Financial period,which is not possible with PS.
    Similarly, overheads are recorded in CCA and needs to be analysed there.
    If one goes against these big groupings in SAP, you always run into problems.

  • How to create Formula based value field in COPA

    Hi,
    I want to know how to create formula based  value field in COPA
    My Requirement is i want to collect some value in formula based value field and want to use in copa allocation cycle as a tracing
    factor.
    anybody give some light on the same topic or requirement ?
    Thanks
    Nilesh R

    The key figure you are creating in KE2K is not a value field, i.e. you can't post to it and you can't use it in a report. It is a caluculated value that can be used only in assessment and top-down-distribution.
    In Ke2K, enter a name for your key figure, then click on the the white sheet button to create it. Now the formular area is open for input. Input your formular (e.g. VV001 + VV002 - VV003 .... where VVXXX are the technical names of value fields).
    Now click the "check formuar"-button. Then save.
    Before you can use the key figure in assessment, execute TC KEUG.
    Now the key figure is available as any value field in the tracing factor selection of your assessment cycle.
    I hope this made it clearer.
    Regards
    Nikolas

  • Origin Group as Value field in COPA - Is that Possible

    Hello Gurus,
    The business requirement is to see all the Origin Groups as Value fields in COPA - Is that Possible? If Yes, Please suggest me the steps to follow.
    Thanks a lot for your time.
    Regards,
    PM

    Hi Praveen
    Origin group cant be a Value Field.. It can be a Characteristic...
    Try with these 2 options
    1. KEA5 - Click on Create/Change a new Char and Try to create it with reference from table MBEW... If this is allowed, you will be able to plug in the Field Origin group in yur COPA data structure... regenerate your op concern after this
    2. If (1) is not allowed, then create a WW char and write a derivation rule in KEDR with ref to Table LOOKUP and use table MBEW
    Regards
    Ajay M

  • Only on value field in COPA gets values from SD

    Hi,
    I created two value fields for COPA. I assigned one of them to the condition VPRS (a cost) which works properly. The other condition, assigned, VKP0 doesnt appear in the COPA-document. We are using record type F.
    But when I ran an flow analysis I can see that the value from VKP0 has flown to COPA in record type A?
    I will assign point directly to a working solution.
    Best regards
    Carl-Johan

    HI,
    Billing document value flow is as per KE4I mapping to value fields.
    There are some value flow analysis tools under CO-PA to check your settings with respect to value flows. Use transaction KE4ST (Simulate billing document transfer -> Value flow (<Ctrl +F7>) to check where things went wrong.
    Hope this helps.

  • Recalculation of Value field in COPA

    Hi,
    We have a value field in COPA which derives its value from the UoM conversion maintained in Material Master,
    we have now realized that incorrect conversion factors were maintianed in some material master records due to which incorrect values are being displayed in COPA reports.
    We have corrected the Material Master records, but how can we update the existing COPA values ?
    Regards
    Sachin Bhutani

    Hi ,
    You cannot revalue value fields in COPA. You can however derive the characteristics derivation using Realignment functionality. In order to overcome your problem , you may have to resort to differential postings generation through KE21N.
    Enjoy
    Venkat.

  • Value Field in COPA doesn't updated in Pricing Procedure

    Dear SAP Experts,
    I have a problem about Value Field in COPA.
    Why the Value Field in COPA that have been assigned to Transfer of Billing Document for Statistical Condition Type doesn't updated in Pricing Procedure (SD) when Billing Posting?
    Any suggestion will be appreciated.
    Thank You
    Regards,
    Kursteilnehmer

    HI
    in pricing procedure SD consultant are creating the pricing condition rules wher these keys are purley belongs to revenue keys .the conditions wich are taken consideration these are all belongs to finding profit margin.
    coming to CO-PA the main objective of copa is analysig the profitability of particular segment .wher as in  CO-PA the most happend flow from sd saide . so wat ever conditions are taking in pricing procedure its compulsary add co-pa valu fields .to take the reports.
    even though in FI-SD interface levele this pricing is taking greater place to flow the values with the help accounting keys.
    coming to stastical condistion co-pa is real cost object

  • Populate New Value field in COPA for Previous periods

    Hi All,
    I have added a new value field to COPA structure and regenerated the Operating Concern. But I dont know how to populate this value field for all the exsiting records. Any help would be appreciated.
    Thanks
    MKR

    I have to manually update all the COPA tables for reporting.

  • Changing value fields in COPA

    Hello,
    I want to change :
    - the text description for 2 value fields in COPA.
    - These value fields are assigned to the value field group Z002 (in the T code KEVFG), and I want to change this assignment
    by linking them to the value field group Z001.
    These 2 value fields are not any more used for 2 years. Can this change have a lot of impact in the production system?. Shall I need to generate again the operating concern after these changes?
    Thanks in advance
    Barondra BERGET

    Hi,
    If you want to change the description of a characteristic
    or value field you must change the descriptions of the related
    data element.
    Therefore you need to perform the following steps:
    1. In KEA5 / KEA6, type in the name of the characteristic/
       value field and click on the create / change button
    2. On the next screen, double click on the data element of your
       characteristic/value field
    3. On the 'Display Data Element' screen, click on the tab strip
       "Field label".  You can see the four field lables short, medium, long
       and heading.  You should change all four field labels and then
       regenerate the data element.  After having done this you may have to
       to regenerate the characteristic/value field and the operating
       concern.
       I hope this answers your query. If so please close this message by
    pressing the confirm button. Else do not hesitate to get back for more
    clarifications.
    Kind Regards,
    Abhisek Patnaik,

  • How to change report region fields in read only mode?

    How to change report region fields in read only mode?
    skud.

    add the following javascript fuction to page header(or Javascript function and variables section)
    function disableItems(pRegionStaticId,pDisableFlag) {
      $('#'+pRegionStaticId).find('[name^=f]').each( function(){ /* matches fxx */
        if( $(this).attr('name').match(/f[0-9][0-9]/) ){
          return $(this);
      }).attr('disabled',pDisableFlag);
    pRegionStaticId is the region's static Id+
    Note that this code specifically disables only application arrays. Disabled items are not available after submission (and hence are different from readonly) . But any page javascript can modify disabled or readonly items(client side), so you must check at the server side to validate the data.
    You can disable items using
    disableItems('MY_REGION_ID' ,true);and enable them by passing false
    disableItems('MY_REGION_ID' ,false);

  • Region Field Mandatory in TRIP in Travel Management

    Dear Gurus,
                 I have able to make region field mandatory in PR05 . In our client site all permutation and combination has been done according to region field. But I am unable to bring Region field in TRIP or TP04 and also I want that field to be mandatory . Could you please guide how to bring Region field in TRIP or TP04 and how can I make that mandatory too.
    Please suggest.

    Unfortunately this is a limitation of the backend functionality because the REGION field was a new functionality starting ERP2005 in Web Dynpro, and this field is only available in FITVFELD_WEB. The field was integrated with the "Country" field in Web Portal. The customising point for Travel Request was also added in Portal which as you see is not available in FITVFELD.
    And when you create expenses for the request, the REGION field can be input manually, the value is maintained in Table T702O.
    So as a standard solution so it is not possible without making a modification
    I mentioned modifying the table PTRV_T706Z_FLDS but actually just reading it again I dont think this will work for TRIP in this manner.
    Edited by: Sally Redmond on Dec 13, 2011 12:10 PM
    Edited by: Sally Redmond on Dec 13, 2011 12:11 PM

  • Is it possible to have Auxiliary Cost Component as Value Fields in COPA

    Respected Gurus,
    Is it possible to have Auxiliary Cost Component as Value Fields in COPA - Please Advise?
    Thanks
    PM

    Hi Praveen ,
    It is possible.. in Transaction KE4R .. we have to specify the cost component structure .. where you map the cost components with value fields..
    Please use your auxiliary Cost Comp Structure in KE4R to achieve your purpose
    Regards
    Sarada

Maybe you are looking for

  • How can I protect my iphone from restoring if stolen?

    Hi I'm looking for a way to prevent or protect my iPhon/iPad from being restored after somebody stole them.... because my iPad wasn't exactly cheap I want to protect it as much as possible. I allready set up "find my ipad/iphone" but still can't stop

  • I signed up for Apple ID and Apple Support Communities separately. Can I merge the two accounts?

    I signed up for an "Apple ID" and an "Apple Support Communities username" separately using the same e-mail address.  Is there any way to merge the two accounts? I signed up for "Apple Support Communities" several years ago to get help with Apple prod

  • Can 2 Ipods have the exact same Itunes files?

    I have 2 30GB Video Ipods (5th gen I think). I would like to sync them to the same Itunes account on the same computer (including all the same folders). I have read the tutorial, but it sounds like they assume each Ipod would have different folders.

  • EASY General Class for structure of ITAB / dynamic ITAB / FCAT

    Hi Guys. Seeing all the convoluted posts about Dynamic ITABS, getting the structure of ANY ITAB (whether or not it's in the dictionary) building Dynamic FCATS etc. I'm actually very puzzled as the whole concept is CHILDISHLY SIMPLE. If you model this

  • RIM missses the obvious

    or did they? why in the name of all   that's holy did RIM    not  make it possible to access all the functions of the   bb most notably the calendar  through the desk top manager? was it stupidity or  was  it just beyond their capability? I   wonder