Region filed is not diplaying any values in e-shop application

Hi Experts,
I am working on e-shop application of CRM e-commerce.In my e shop registration page ,i have one select option filed called region.it display the country region list according to which country use has to be select.here i have one problem,,that is.I have two registration profile in Backend system.In this one registration profile countries is diplaying or getting all regions in the select feild of region of e-shop appllication. And for other registration profile it is not dipalying any regions.I am using the same logic for all coutries to diplay regions,but it is showing to some cooutries only.In the Backend all countries having region list.could you any body please suggest me? please suggest me the which RFC is calling for this.
Its very urgent.
Thanks in Advance!!!
Regards,
Kiran

Hi Mark,
I resolved the above problem.But i have another issue.i.e according to AddressforamtID ,layouts will change in B2C shops.as of now we are using to addressformatID s 0,1.But i created 2 more registratio profiles,so i have to change Layout for new registration profiles,could you please suggest me whic RFC or which configuration do we need to change.
Thanks in Advance!!
Thanks and Regards,
Kiran

Similar Messages

Standar ws ProjectByPartyQueryResponse_In is not returning any values

Hi gurus,
I'm trying to use the standar webservice ProjectByPartyQueryResponse_In in our landscape in order to get all the projects related to the person responsible for the project but the web service is not returning any values.
When I execute the service -using soapui- with the following values (or any other value for that matters):
<PartyID>20000143</PartyID>
<PartyRoleCode>ZA</PartyRoleCode>
The web service always returns :
       <Log>
            <BusinessDocumentProcessingResultCode>5</BusinessDocumentProcessingResultCode>
            <MaximumLogItemSeverityCode>3</MaximumLogItemSeverityCode>
            <Item>
               <TypeID>002(ECC_SE_COMMON)</TypeID>
               <SeverityCode>3</SeverityCode>
               <Note>No records returned for ZA 0020000143</Note>
            </Item>
         </Log>
The party Id exists and also de party role code and there is at least one project that has that party with that role. I'm sure because I use other web service to find a project by id and in the result the project has the <Party> section with those values.
I was looking for solutions, notes, threads in forums with no success, then i decided to debug the webservice and I did find the following line in the webservice code.
SELECT objnr INTO TABLE it_data FROM ihpa
WHERE parvw = role_code AND
         parnr = party_id AND
         obtyp = 'PDN'.
when that line executes the select always returns 0 values, then I look in the table IHPA using the SE16 without any filter and I found that my records exists!! but the select does not get it. I was wondering why the select is not working and then I filter the data in the SE16 using the same values that the query does
for example:
PARVW= ZA
PARNR = 20000143
OBTYP = PDN
And I was surprised when the SE16 did not found any value even I was seeing in the previous screen with no filters!!!! And I supouse thats why the webservice is not working. I started making filters one by one, for example firts filtering just de PARVW = ZA and works, but when I filter just the PARNR = 20000143 the SE16 can't find any value, just when I put an * at the end of the number the SE16 returns all the values expected, Im guessing that the fields in the database has blanks at the end but this is a standar table and a standar program.
Have any of you had the same problem? is there anything that I can do? does anyone knows if this is an unkown bug? becaus I could'n find any note on the marketplace.
Any help would be appreciated.
Gustavo Balboa

Hi!
The problem were solved but not using the Badi, because the badi only let you change the value of the var party_id and that var is declared as PARNR (of type numeric with length 10), and no mater wat you do the two 00 can´t be removed.
We solved the problem with an enhancement point in the code at the method "party_get_data", look at the beginin and at the end. We just change the type of var used for party_id.. now we use a CHAR one insted the numeric used by the original code.
And we repeat the select...
Thank you very much for the help.
METHOD party_get_data.
"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""$"$SE:(1) Class CL_PRS_PROJECTPRJPARTYQR, Method PARTY_GET_DATA, Start                                                                                A
$$-Start: (1)----
$$
ENHANCEMENT 1 ZPARTY_GET_DATA.    "active version
DATA : WA_PARNR TYPE I_PARNR.
DATA : WA_CHPAR(10) TYPE C.
ENDENHANCEMENT.
$$-End:   (1)----
$$
DATA : temp_object_number TYPE ihpa-objnr,
          field1 TYPE char50,
          field2 TYPE char50,
          field_role TYPE char50,
          field_party TYPE char50,
          st_object_number TYPE TABLE OF bapiprexp.
DATA : it_data TYPE TABLE OF st_data,
         wa_data LIKE LINE OF it_data,
         itab TYPE TABLE OF st_data,
         wa LIKE LINE OF itab,
         wa_project_details LIKE LINE OF project_details,
         null.
Select Object number based on input Party and Role
SELECT objnr INTO TABLE it_data FROM ihpa
WHERE parvw = role_code AND
         parnr = party_id AND
         obtyp = 'PDN'.
Select Project ID based on input Object number
LOOP AT it_data INTO wa_data.
    SELECT pspid post1 FROM proj INTO CORRESPONDING FIELDS OF wa_data
    WHERE objnr = wa_data-pspid.                         "#EC CI_NOFIELD
    ENDSELECT.
    MOVE-CORRESPONDING wa_data TO wa.
    APPEND wa TO itab.
ENDLOOP.
IF sy-subrc <> 0.
    field_role = cl_wd_utilities=>get_otr_text_by_alias( 'PLM-SE_PRS_XI_PROXY/ROLE_CODE' ) .
    field_party = cl_wd_utilities=>get_otr_text_by_alias( 'PLM-SE_PRS_XI_PROXY/PARTY_ID' ) .
    CONCATENATE field_role role_code_external INTO field1.
    CONCATENATE field_party party_id INTO field2.
    MESSAGE e002(ecc_se_common) WITH field1 field2 INTO null.
    CALL FUNCTION 'PS_BAPI_MESSAGE_APPEND'
      TABLES
        return = party_return.
ELSE.
    MESSAGE s082(ops_se_prs) INTO null.
    CALL FUNCTION 'PS_BAPI_MESSAGE_APPEND'
      TABLES
        return = party_return.
ENDIF.
LOOP AT itab INTO wa.
    MOVE-CORRESPONDING wa TO wa_project_details.
    APPEND wa_project_details TO project_details.
ENDLOOP.
"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""$"$SE:(2) Class CL_PRS_PROJECTPRJPARTYQR, Method PARTY_GET_DATA, End                                                                                A
$$-Start: (2)----
$$
ENHANCEMENT 2 ZPARTY_GET_DATA.    "active version
WA_CHPAR = party_id.
SHIFT WA_CHPAR BY 2 PLACES.
CLEAR party_return.
REFRESH party_return.
SELECT objnr INTO TABLE it_data FROM ihpa
WHERE parvw = role_code AND
         parnr = WA_CHPAR AND
         obtyp = 'PDN'.
Select Project ID based on input Object number
LOOP AT it_data INTO wa_data.
    SELECT pspid post1 FROM proj INTO CORRESPONDING FIELDS OF wa_data
    WHERE objnr = wa_data-pspid.                         "#EC CI_NOFIELD
    ENDSELECT.
    MOVE-CORRESPONDING wa_data TO wa.
    APPEND wa TO itab.
ENDLOOP.
IF sy-subrc <> 0.
    field_role = cl_wd_utilities=>get_otr_text_by_alias( 'PLM-SE_PRS_XI_PROXY/ROLE_CODE' ) .
    field_party = cl_wd_utilities=>get_otr_text_by_alias( 'PLM-SE_PRS_XI_PROXY/PARTY_ID' ) .
    CONCATENATE field_role role_code_external INTO field1.
    CONCATENATE field_party party_id INTO field2.
    MESSAGE e002(ecc_se_common) WITH field1 field2 INTO null.
    CALL FUNCTION 'PS_BAPI_MESSAGE_APPEND'
      TABLES
        return = party_return.
ELSE.
    MESSAGE s082(ops_se_prs) INTO null.
    CALL FUNCTION 'PS_BAPI_MESSAGE_APPEND'
      TABLES
        return = party_return.
ENDIF.
LOOP AT itab INTO wa.
    MOVE-CORRESPONDING wa TO wa_project_details.
    APPEND wa_project_details TO project_details.
ENDLOOP.
ENDENHANCEMENT.
$$-End:   (2)----
$$
ENDMETHOD.

XMLTABLE function not returning any values if xml has attribute "xmlns"

Hi,
XMLTABLE function not returning any values if xml has attribute "xmlns". Is there way to get the values if xml has attribute as "xmlns".
create table xmltest (id number(2), xml xmltype);
insert into xmltest values(1,
'<?xml version="1.0"?>
<emps>
<emp empno="1" deptno="10" ename="John" salary="21000"/>
<emp empno="2" deptno="10" ename="Jack" salary="310000"/>
<emp empno="3" deptno="20" ename="Jill" salary="100001"/>
</emps>');
insert into xmltest values(2,
'<?xml version="1.0"?>
<emps xmlns="http://emp.com">
<emp empno="1" deptno="10" ename="John" salary="21000"/>
<emp empno="2" deptno="10" ename="Jack" salary="310000"/>
<emp empno="3" deptno="20" ename="Jill" salary="100001"/>
</emps>');
commit;
SELECT a.*
FROM xmltest,
XMLTABLE (
'for $i in /emps/emp
return $i'
PASSING xml
COLUMNS empno NUMBER (2) PATH '@empno',
deptno NUMBER (3) PATH '@deptno',
ename VARCHAR2 (10) PATH '@ename',
salary NUMBER (10) PATH '@salary') a
WHERE id = 1;
The above query returning results but below query is not returning any results because of xmlns attribute.
SELECT a.*
FROM xmltest,
XMLTABLE (
'for $i in /emps/emp
return $i'
PASSING xml
COLUMNS empno NUMBER (2) PATH '@empno',
deptno NUMBER (3) PATH '@deptno',
ename VARCHAR2 (10) PATH '@ename',
salary NUMBER (10) PATH '@salary') a
WHERE id = 1;
how to get rid out of this problem.
Thanks,
-Mani

Added below one in xmltable, its working now.
XmlNamespaces(DEFAULT 'http://emp.com')

IE/ExternalInterface do not return any value if movie added with appendChild

There is a problem with IE/ExternalInterface if movie is added to DOM f.ex appendChild. JavaScript functions are called but they do not return any value.
MS first response was that this is 3rd party/Adobe problem.
Fixing this with innerHTML is not the solution. Using here Any suggestions ?
Simplified test case has
          var flashMovie = '<OBJECT id="testId" codeBase="http://fpdownload..
          // Works in IE and FF
        document.getElementById("testdiv").innerHTML = flashMovie;
          // ExternalInterface.call calls JS but does not return value in IE. Works in FF
          var tempDiv = document.createElement("div");
          tempDiv.innerHTML = flashMovie;
          document.body.appendChild(tempDiv);
Here is complete code
http://pastebin.com/fbc0aa9a
Here is AS3 code in for ajax.swf
http://pastebin.com/d4efd47b
-H

You are right about that duplicate id of the movie in this example, but that is not case here.
I appreciate if you try this and confirm that problem exist or any work-around.
Here is more explanation to original post:
In HTML is JavaScipt
function fromJs()
     return "text from js..";
that is called from AS3
var s = ExternalInterface.call("fromJs");
This "s" value and also ExternalInterface.objectID are null in AS3.
Here example again only with non-working case without that duplicate id with innerHTML
http://pastebin.com/f4e33af93
and also movie with AS3 code is attached.
Using plain innerHTML this case works
document.getElementById("testdiv").innerHTML = '<OBJECT..
and with appendChild does not work
var tempDiv = document.createElement("div");
tempDiv.innerHTML = "<OBJECT ..
document.body.appendChild(tempDiv);

Constant PCORP for Ledger !* does not contain any value

Dear SAP Guru's,
I have a user attempting to process a credit memo via t-code FB75 and is receiving the following error message while attempting to post the transaction.
Constant PCORP for Ledger !* does not contain any value
The user was able to post to other customer accounts but this one. The customer master looks fine.
POINTS AWARDED.
Thanks!

Hi,
Pls go to the following path
GL accounting(new)-business transaction-Doument Spiltting-Activate doument spiltting.
Praobaly you would have chosen the standary a/c assignment check box and constant.
That's y this error occured even i have got same error and it resolved now.

Function Does Not Return any value .

Hi ,
I am wrtting the below funtion without using any cursor to return any message if the value enters by parameters
does not match with the value reterived by the function select statement or it does not reterive any value that
for the parameters entered .
E.g:
CREATE OR REPLACE FUNCTION TEST_DNAME
(p_empno IN NUMBER,p_deptno IN NUMBER)
RETURN VARCHAR2
IS
v_dname varchar2(50);
v_empno varchar2(50);
V_err varchar2(100);
v_cnt NUMBER := 0;
BEGIN
SELECT d.dname,e.empno
INTO v_dname ,v_empno
FROM scott.emp e , scott.dept d
WHERE e.empno=p_empno
AND d.deptno=p_deptno;
--RETURN v_dname;
IF p_empno IS NOT NULL AND p_deptno IS NOT NULL
THEN IF v_dname is NULL THEN
v_err :='Not Valid';
RETURN v_err;END IF;
ELSIF p_empno IS NOT NULL AND p_deptno IS NOT NULL
THEN IF v_dname is NOT NULL THEN
RETURN v_dname; END IF;
ELSE
RETURN v_dname;
END IF;
END;
Sql Statement
SELECT TEST_DNAME(1234,30) FROM dual
AND IF I enter a valid combination of parameter then I get the below error :
e.g:
SQL> SELECT TEST_DNAME(7369,20) FROM dual
2 .
SQL> /
SELECT TEST_DNAME(7369,20) FROM dual
ERROR at line 1:
ORA-06503: PL/SQL: Function returned without value
ORA-06512: at "SCOTT.TEST_DNAME", line 24
Where I am missing .
Thanks,

Format you code properly and look at it:
CREATE OR REPLACE
   FUNCTION TEST_DNAME(
                       p_empno IN NUMBER,
                       p_deptno IN NUMBER
    RETURN VARCHAR2
    IS
        v_dname varchar2(50);
        v_empno varchar2(50);
        V_err varchar2(100);
        v_cnt NUMBER := 0;
    BEGIN
        SELECT d.dname,
                e.empno
          INTO v_dname,
                v_empno
          FROM scott.emp e,
                scott.dept d
          WHERE e.deptno=d.deptno
            AND e.empno=p_empno
            AND d.deptno=p_deptno;
        --RETURN v_dname;
        IF p_empno IS NOT NULL AND p_deptno IS NOT NULL
          THEN
            IF v_dname is NULL
              THEN
                v_err :='Not Valid';
                RETURN v_err;
            END IF;
        ELSIF p_empno IS NOT NULL AND p_deptno IS NOT NULL
          THEN
            IF v_dname is NOT NULL
              THEN
                RETURN v_dname;
            END IF;
         ELSE
           RETURN v_dname;
       END IF;
END;
/Both p_empno and p_deptno in
SELECT TEST_DNAME(7369,20) FROM dualare not null. So SELECT will fetch some v_dname and v_empno. Since p_empno and p_deptno iare not null your code will go inside outer IF stmt and will execute its THEN branch. That branch consist of nothing but inner IF statement. And since v_dname is NOT NULL it will bypass that inner IF and exit the outer IF. And there is no RETURN stmt after that outer IF. As a result you get what you get - ORA-06503. Also, both if and elsif in your code check same set of conditions which makes no sense.
SY.

UTL File not return any values in .CSV oracle plsql hrms

Hello experts,
We want to extract employee details from Core hrms with output as .csv file :
i have created below package for utl but not return any values in csv file pls help me on this.:::
CREATE OR REPLACE PACKAGE BODY APPS."XXPER_PAYROLL_XIR_PKG"
AS
procedure payroll_main (
in_from_date IN date,
in_to_date IN date,
p_errbuf OUT VARCHAR2,
p_retcode OUT NUMBER
) is
cursor c_person is
SELECT distinct ppf.person_id
FROM per_person_types ppt,
pay_payrolls_f pp,
per_person_type_usages_f pptu,
per_all_people_f ppf,
per_all_assignments_f ppa
WHERE ppf.person_id = pptu.person_id
AND pptu.person_type_id = ppt.person_type_id
AND ppt.user_person_type in ('Employee', 'Ex-employee' ,'Intern')
AND ppf.person_id = ppa.person_id
AND ppa.assignment_type = 'E'
AND ppa.primary_flag = 'Y'
AND ppa.payroll_id = pp.payroll_id
-- and nvl(ppa.ass_attribute10, 'N') = 'Y' -- this is in Production
AND pp.payroll_name = 'Calendar Payroll'
AND trunc( ppf.last_update_date) between in_from_date and in_to_date
AND trunc( ppa.last_update_date) between in_from_date and in_to_date
AND trunc( ppt.last_update_date) between in_from_date and in_to_date
AND trunc( pptu.last_update_date) between in_from_date and in_to_date
AND trunc(sysdate) between ppf.effective_start_date and ppf.effective_end_date
AND trunc(sysdate) between ppa.effective_start_date and ppa.effective_end_date
AND trunc(sysdate) between ppf.effective_start_date and ppf.effective_end_date
AND trunc(sysdate) between pptu.effective_start_date and pptu.effective_end_date
AND ppf.employee_number <> 'NONE';
v_person_id number;
v_dom_eff_dt date;
io_err_flag varchar2(1);
io_err_desc varchar2(2000);
io_record_update boolean;
BEGIN
dbms_output.put_line('in_from_date-' || in_from_date);
dbms_output.put_line('in_to_date-' || in_to_date );
open c_person;
loop
fetch c_person into v_person_id;
exit when c_person%NOTFOUND;
get_person_information( v_person_id ,
in_from_date ,
in_to_date ,
io_err_flag ,
io_err_desc );
dbms_output.put_line('Per_id-' || v_person_id || ': ' || 'Payroll_main' || sqlcode || sqlerrm );
end loop;
close c_person;
end payroll_main;
PROCEDURE get_person_information(in_person_id IN number,
in_from_date IN date,
in_to_date IN date,
io_err_flag IN OUT varchar2,
io_err_desc IN OUT varchar2) is
--v_service_date DATE;
v_data_file UTL_FILE.FILE_TYPE;
v_record VARCHAR2(1000);
v_header VARCHAR2(1000);
v_record_mail VARCHAR2(1000);
v_file_name VARCHAR2(100);
v_file_name_mail VARCHAR2(100);
v_ser_name VARCHAR2(50);
v_dir VARCHAR2(100) :='XX_XIR_HR_PAY';
v_con_req_id NUMBER;
v_user_id NUMBER;
v_resp_id NUMBER;
v_resp_appl_id NUMBER;
p_request_id NUMBER;
P_status VARCHAR2(100);
cursor c1 is
SELECT ppf.person_id per_id,
ppf.employee_number emp_num,
ppf.first_name f_name,
ppf.last_name l_name,
ppf.national_identifier nat_id,
ppf.date_of_birth dat_birth,
ppf.sex sex_g,
-- TO_DATE(ppf.attribute1,'DD-MON-YYYY') att_date,
ppt.user_person_type per_type,
ppf.email_address email_id,
ppf.last_update_date last_upd_date
FROM per_person_type_usages_f pptu,
per_person_types ppt,
per_people_f ppf
WHERE ppf.person_id = in_person_id
AND ppf.person_id = pptu.person_id
AND pptu.person_type_id = ppt.person_type_id
and trunc(ppf.last_update_date) between in_from_date and in_to_date
and trunc( pptu.last_update_date) between in_from_date and in_to_date
AND trunc( ppt.last_update_date) between in_from_date and in_to_date
AND trunc(sysdate) between ppf.effective_start_date and ppf.effective_end_date
AND trunc(sysdate) between pptu.effective_start_date and pptu.effective_end_date
AND ppt.user_person_type in ('Employee', 'Ex-employee' ,'Intern')
and ppt.system_person_type in ('EX_EMP', 'EMP') ;
cursor c2 is
SELECT substr(pa.address_line1, 1, 60) address_line1,
substr(pa.address_line2, 1, 60) address_line2,
pa.town_or_city city,
pa.region_2,
pa.postal_code,
pa.region_1,
pa.country,
pa.date_from,
nvl(pa.date_to, to_date('12/31/4712', 'mm/dd/yyyy')),
pa.creation_date,
pa.last_update_date
FROM per_addresses pa
WHERE pa.person_id = in_person_id
AND pa.last_update_date between in_from_date and in_to_date
AND trunc(sysdate) between date_from and nvl(date_to, to_date('12/31/4712', 'mm/dd/yyyy'))
AND pa.primary_flag = 'Y';
cursor c3 is
SELECT pp.phone_number pnum
FROM per_phones pp
WHERE pp.parent_id = in_person_id
AND pp.last_update_date between in_from_date and in_to_date
AND trunc(sysdate) between date_from and nvl(date_to, to_date('12/31/4712', 'mm/dd/yyyy'))
AND phone_type = 'H1';
cursor c4 is
SELECT ppos.period_of_service_id,
ppos.date_start start_date,
ppos.adjusted_svc_date,
ppos.actual_termination_date,
TO_DATE(ppos.attribute1,'yyyy/mm/dd hh24:mi:ss') last_day
FROM per_periods_of_service ppos
WHERE ppos.person_id = in_person_id
AND ppos.last_update_date between in_from_date and in_to_date
AND ppos.date_start = ( select max(date_start)
from per_periods_of_service
where person_id = in_person_id
and trunc(date_start) <= trunc(sysdate) );
Begin
dbms_output.put_line('Directory:'||v_dir);
BEGIN
v_header := 'Employee Number'||CHR(9)
||'Fore Name'||CHR(9)
||'Sur Name'||CHR(9)
||'PPS'||CHR(9)
||'Date of birth'||CHR(9)
||'Gender'||CHR(9)
||'Person Type'||CHR(9)
||'Email Address'||CHR(9)
||'Last Update Date'||CHR(9)
||'Address1'||CHR(9)
||'Address2'||CHR(9)
||'Phone_Number'||CHR(9)
||'Start Date'||CHR(9)
||'Last Day';
v_file_name :='XIR_DATA.xls';
dbms_output.put_line('Excel_file_name:'||v_file_name);
v_data_file :=UTL_FILE.FOPEN(v_dir,v_file_name, 'W');
UTL_FILE.PUT_LINE(v_data_file,v_header);
FOR i IN c1 LOOP
FOR j IN c2 LOOP
FOR k IN c3 LOOP
FOR m IN c4 LOOP
dbms_output.put_line(' excel file loop ');
v_record:=i.emp_num||CHR(9)
||i.f_name||CHR(9)
||i.l_name||CHR(9)
||i.nat_id||CHR(9)
||i.dat_birth||CHR(9)
||i.sex_g||CHR(9)
||i.per_type||CHR(9)
||i.email_id||CHR(9)
||i.last_upd_date||CHR(9)
|| j.address_line1||CHR(9)
||j.address_line2||CHR(9)
||k.pnum||CHR(9)
||m.start_date||CHR(9)
||m.last_day;
UTL_FILE.PUT_LINE(v_data_file,v_record);
END LOOP;
END LOOP;
END LOOP;
END LOOP;
UTL_FILE.FCLOSE(v_data_file);
dbms_output.put_line(' close excel file');
EXCEPTION
WHEN OTHERS THEN
dbms_output.put_line('unable to create data excel file in proc1'||SUBSTR(SQLERRM,1,25));
END;
end get_person_information;
END xxper_payroll_xir_pkg;
EE Number Forename Surname Dept effective Start Date_dept Start Date Leave Date effective Start Date_leave_Dt Date of Birth Address1
Thanks
Edited by: 981527 on Feb 12, 2013 5:59 AM
Edited by: 981527 on Feb 12, 2013 6:05 AM

Did you make sure that the queries are returning values in the first place? From the last few lines, it looks like you have the header written to the file. Is that correct?
-Karthik

Table TZC37 field STATU search help drop down is not pulling any values?

Hi,
In table TZC37 field STATU(Contract status) search help is not pulling any values( drop down list when execute the table values) .. but the table has values for this field.
And also I checked in the configuration, this field has values in the config also. But still the search drop down is not getting any values.
Can any one knows what could be the reason and how to solve this issue?
I am using this field in transaction FNVS when searching loan number based on Status field.
Thanks for your time.
Murali.

Hi Micky,
I am using this in transaction FNVS (when searching Loan number based on Status field( this is Custom Search help added this field ( VDARL- SSTATI )
Value table for this data type - STATI is TZC37.
While getting records from these tables(TZC37 or VDARL ) I am trying to use drop down values for searching data using this field SSTATI. But its not showing any drop down values. It supposed to show what ever values exists for this field right?
I checked in the cofig of this table and values exists for this field.
Any help appreciated.
Thanks.

Vendor Search not returning any values in SRM

Hi Gurus
Has any one come accross the following issue? Kindly advice.
SRM 3.0
Search Vendor (F4) not returning any value although Vendor exist in SRM (system allows to raise Cart if Requestioner keys in the Vendor Number manually, ie. Vendor has very much got replicated in SRM)
Steps to replicate the issue
1) Log on to SRM portal
2) Expand the Go Shopping and click on Shop (Extended Form)
3) Click on Create Limit Item
4) Fill in the Description, Select the Product Category, Enter the Value Limit & Expected Value & fill in the required date
5) To search for Supplier, click on the find button
6) In the Find Vendor screen press the start button without entering any restriction
7) System throws a message "No Vendor found"
Kind regards,
Mehul Shah

Hi Muthu,
Thanks for replying Muthu.
Entries do exists in VENMAP.
No filters are set while searching for Vendor.
In fact, If I find the Vendor code from ERP and key in the vendor number in the Supplier field in SRM, it rightly picks up the vendor from the Vendor code.
The only issue is....while I try to search for Supplier using the Supplier search functionality (by clicking on the binocular), the search functionality does not return any values (I put no restriction).
By the way, Is there any missing Attribute in PPOMA_BBP that may be causing this?
Regards,
Mehul.

OWHS table not getting any value in PLD

I am trying to make a pld in which i want to pull the database table owhs and place the warehouse address i am not getting any value in the PLD however there is adress in the ware house field still its not getting me any result
Please help
Regards,
manish

Hi Manish....
Even if you get the OWHS table you wont get the address format as you desire. That is complete concatenated address. It will be like city, street, country like that.....
Regards,
Rahul

Interfacing S7-300 PLC with OPC variable not having any value

Hi, i am trying to interface a Seimens S7-300 PLC with LabVIEW with the MPI protocol. I followed the webcast "Connect to any PLC using LabVIEW". There are 2 problems that i face,
1. There is a Timeout Dialog Box which ofcourse times out the connection to the PLC. This allows a max time of 30seconds. Can i increase the Time out in any way?
2. When i create a variable as shown in the webcast, it does not have any value nor does it have a time stamp value as the variable in the webcast. I am uploading a picture here to make it clear. I wanted to know why does this happen? It does display the system variable values as being valid and also updates them.
Thanks.
LabVIEW 8.2,8.6,2009...still learning
Attachments:
bolen input error.JPG ‏106 KB

Hi David,
This is the webcast i am talking about
http://zone.ni.com/wv/app/doc/p/id/wv-263
I am using LabVIEW 8.6, NI OPC Servers to connect with an S7-300 PLC using the MPI protocol. Following the procedure outlined in the webcast:
Opened OPC servers:
1.Created a Channel.
2.Cose the device driver.
3. Set the serial communcations settings(Baudrate etc) according the configuration settings of the PLC.
After doing step 3 i get a dialog box asking me to set the time out period of the PLC (which i set to 30 seconds i-e the max that was allowable). I also set the write attemps before failure(which i set to 8).
4. Added a Device and gave it an arbitrary name.
5. Chose the device model.
6. Set the Device ID to 1.
Than i added a tag. Gave the name Input, the address of the input and all(which was accepted by the OPCServer).
After creating a tag when i open the OPC Client, all system variables are displayed as being valid and also get updated but the tag i created has no value and there is not updating taking place as indicated by the time stamp. I will change the tag and also see if i can upload a video of exactly what i am doing.
Thanks for your reply.
LabVIEW 8.2,8.6,2009...still learning

Off setting account not displaying any values in FBL3N AND FBLL03

Hi Experts,
We did customization and assigned Customer ,Vendor ,plant fileds as special fields in customization client ,which same are appearing in FBL3N and also FBLL03 but without any value.
I post an entry
Rent account Dr
To Vendor account.
If i select Rent account in FBL3N GL line item display ,there is no value updated in vendor filed.Please help me
Rgds
Suma Mani

Hi,
In the Standard FBLxN it is not available.
These are the steps required to have it available:-
Contra Account in FBLxN
Transaction FIBF
Menu>Settings>Products> of a customer.
New Entry:-
Product = RFPOS
Activ = Set Flag
Save
Menu>Settings>P/S Function Modules> of a customer
New Entry
Event = 00001650
Product= RFPOS
Module = Line_Items_Get_GKONT
Regards,
Amit

RFC call do not return any value

Hi All,
I have an RFC written in one R/3 system(call center R/3) and i am calling this RFC in the ERP system.
If i try to run the RFC locally in the call center system ,it runs correctly and returns me proper values.
But when i try to call it from other R/3 system(ERP) the RFC does not return value.(both cases i am passing same parameters).
Also , RFC parameters are defined with pass by value option.
I am not able to trace why this behaviour,can anyone pin point what could be the possible cause of error.
Thanks in advance,
Swati

No ,there i snot RFC connection problem ,i have checked it from SM59.
Neither do i get any dump or error of no authorization.In fact the sy-subrc after the RFC call is 0.
St22 do not have any trace for the same.
my RCC call is something like this,
IF dest <> ' '.
CALL FUNCTION 'Z_GET_CIC061' DESTINATION dest
                  EXPORTING
                       p_comp        = itab_cic-company
                       p_asc_code    = itab_cic-customer
                       p_wbill_no    = itab_cic-bill_no
                  IMPORTING
                       e_tr_no       = tr_no
                       e_model_code = model_code
                       e_data_origin = data_origin
                 EXCEPTIONS
                         communication_failure = 1
                         system_failure        = 2.
ELSE.
            MESSAGE i000 WITH 'RFC Destination is empty!'.
            EXIT.
          ENDIF.
Can anyone please suggest whats wrong in the above code.
Also what is transaction RFC call?is it related to what i am using in the above code of mine.
Thanks in advance,
Swati

Netweaver 04s F4 on Fiscal Year / Period Variable does not retun any value

Netweaver 04s
F4 on Fiscal Year / Period Variable does not retun any list. When I tried to run the same query in RSRT, It gave a screen where it stopped at a break point.
62     *_____________________________________________________________________
63
64     *              error in >> l_repid       <<
65     *                       >> l_include     <<
66     *                       >> l_source_line <<
67     *__________________________^^^^^^^^^^^^^^_____________________________
68                 BREAK-POINT.                                   "#EC NOBREAK
69                 l_message = rs_c_true.
70               ELSE.
71                 CALL FUNCTION 'RRSV_SYSTYPE_GET'

Press F5 after that..lets see wat happens to it.
and tell wat value is there in your 0FISVARNT infoObject.
Regards,
San!

'F4IF_INT_TABLE_VALUE_REQUEST' is not returning any value when selecting da

*Hello Guys.*
*I hv inserted search help in an field of screen exit in T-code IW21. Its showing value properly when i press f4 but when selecting value its nt returning any value properly....*
*I am pasting code ..please help me out*
*. Process of value Request*
*field <fieldname> module F4_AGENCY*
*MODULE F4_AGENCY INPUT.*
*DATA: IT_AGENCY TYPE TABLE OF ZF4_AGENCY WITH HEADER LINE,*
        *it_FIELD_TAB      type table of DFIES WITH HEADER LINE,*
        *IT_DDSHRETVAL TYPE TABLE OF DDSHRETVAL WITH HEADER LINE.*
*REFRESH : IT_AGENCY[].*
*clear : VIQMEL-ZZAGENCY.*
**SELECT * FROM ZF4_AGENCY INTO TABLE IT_AGENCY.**
*CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'*
    *EXPORTING*
DDIC_STRUCTURE           = 'ZF4_AGENCY'**
      *RETFIELD               = 'ZZAGENCY'*
    PVALKEY                 = ' '**
     *DYNPPROG                = sy-cprog "'SAPLXQQM'*
     *DYNPNR                  = sy-dynnr   "'0101'*
     *DYNPROFIELD             = 'VIQMEL-ZZAGENCY'*
    STEPL                  = sy-stepl**
     *VALUE_ORG               = 'S'*
   *TABLES*
    *VALUE_TAB              = IT_AGENCY[]*
    *FIELD_TAB              = it_FIELD_TAB[]*
    *RETURN_TAB             = IT_DDSHRETVAL[]*
DYNPFLD_MAPPING        =**
EXCEPTIONS**
PARAMETER_ERROR        = 1**
NO_VALUES_FOUND        = 2**
OTHERS                 = 3**
*IF SY-SUBRC <> 0.*
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO**
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.**
*ENDIF.*
*wating for any reply*

Did you take a look at the help for FM? pass the hardcoded value for DYNPPROG and DYNNR (and see if that works)
DYNPPROG and DYNNR cannot be passed as SY-REPID and SY-DYNNR because they are only analyzed after the function module has been called. Instead, first copy the SY fields to local variables and then pass them to the function module.

Region filed is not diplaying any values in e-shop application

Similar Messages

Maybe you are looking for