Region in the Plant - Any impact?

Hello Friends,
I'm almost certain about this, but I would like to confirm this so that i don't mess up with the system
The "Region" in the plant address was wrongly maintained few years ago as 11 instead of 01. If we change this to 01, will there be any impact on any module side?
From SD point of view, I knew it will have impact on the Tax condition records as this is one of the field in the access. But except this, I do not think there will be any impact on MM, FI and CO reporting side. Am I correct?
Any inputs?

Hi
As you already aware thet Region has very important role in determining the Tax, so changing it will sure create an issue.
However I feel that you can do that but must take some precautions, like :-
1. Close all the transactions which are in process (Like open Order, Open Deliver, Invoice)
2. Discuss withh other module so that they must also do the same for their open transaction.
3. Check with your client, as changing the Region will have an effect on Taxes and Auditor may ask the reason since the transactions which are already posted may have wrong tax and wrong region.
4. Maintain the Tax records with new region.
Thanks and regards,
Amitesh Anand

Similar Messages

I'm thinking of using Final Cut Pro to straighten slightly crooked footage and then re-import back to iMovie to complete the video. Does this have any impact on image quality?

I'm thinking of using Final Cut Pro to straighten slightly crooked footage and then re-import back to iMovie to complete the video. Does this have any impact on image quality?

As your rotate the image, you will begin to see black edges. So, as Tom implies, the image must be scaled up to hide those voids. If you shot 4k ad are editing in a HD timeline, no problem, lots of room to spare. If you shot 1080 and are editing in a 1080 timeline, you will run into issues at a certain point. However, if your 1080 project is going to be transcoded to 720 or ye olde DVD you won't notice any deterioration at all.

Is there any impact on database if we change the time of server?

Hi,
Our DB server time is 45 minutes ahead of our application server. We have planned to reset the time of database server. Is there any impact on database if we change the timing of the server?
Platform: Solaris
DB version: 10.2.0.2.0
$ bash
bash-3.00$ date
Thu Apr 23 20:26:19 IST 2009
bash-3.00$ sqlplus /nolog
SQL*Plus: Release 10.2.0.2.0 - Production on Thu Apr 23 20:27:15 2009
Copyright (c) 1982, 2005, Oracle. All Rights Reserved.
SQL> conn /as sysdba
Connected.
SQL> select sysdate from dual;
SYSDATE
23-APR-09
SQL> select systimestamp from dual;
SYSTIMESTAMP
23-APR-09 08.27.53.250947 PM +05:30

That's an application question, not an Oracle question.
Oracle doesn't care what time it is or when the time changes. Your application(s), however, may care. If you use SYSDATE to populate a row and rely on the date later to be unique or to indicate the actual order rows were inserted, changing the date on the server, particular moving it backwards, might cause problems for your application. Does your application have problems running during daylight savings time changes?
Justin

TS1368 My account keeps asking for Region but the drop down menu lists Cities in China. I can,'t cange the region in my account because it asks me to check the date and time but these are correct. Any answers please?

My account keeps asking for Region but the drop down menu lists Cities in China. I can,'t cange the region in my account because it asks me to check the date and time but these are correct. Any answers please?

Look, I understand I still need a card attached to the account. The problem is, it won't accept my card because I only have 87 cents in my bank account right now.
If I had known there would be so much trouble with the iTunes card, I would have just put the cash in my bank account in the morning instead of buying an iTunes card (I didn't expect the banks to be open on Thanksgiving of course).
Apple will only accept cards that have a balance. The balance is so small in my account that it won't accept it as a valid card.
I'm going to have to contact Apple anyway to reset the security questions. That's obvious. Your answers were not exactly helpful. You didn't tell me anything I don't already know, but thanks for trying to be helpful.

Is there any impact on the Oracle server?

Hi all, currently i have an Oracle Application Server and the current version is 9.0.2.0.0. And another server is Oracle database 9i.
Could anyone tell me if there would be any impact on the oracle database server or the application if i want to install the new version (10.1.2.0.2) of Oracle AS? thx a lot.

Actually there could be anything from no impact to a severe impact, depending on what you want to achieve.
If you let your current environment unchanged and do a fresh install of the 10.1.2.0.2 nothing will happen. If you want to upgrade the 902 into 101202 than you should read the very detailled upgrade guide.
Give us some more details and maybe we are able to answer your question.
cu
Andreas

Is there any impact if the files in the Log/ Cache folder are deleted?

Dear All,
We are working on BODS v4.1 SP2 and it looks like some log files in the application server are taking about 30GB of space.
The folder path on the server is
Program Files (x86)\SAP BusinessObjects\Data Services\Log\Cache
and the 4 files are named
PPF_file_21_116_56_1761_1_0_21
PPF_file_21_116_56_1761_1_1_21
PPF_file_21_116_56_1761_1_2_21
PPF_file_21_116_56_1761_1_3_21
Will there be any impact if these files are deleted from the above folder? Anybody has come across this issue before?
Thank you!
Sriram.

Hi Sriram,
Log files are generally .txt which won't occupy much space. But .dmp files occupy huge amount of space and is better to remove it once in a while. Both log and dmp files can be removed to free the disk space. The files in pcache folder are used while running the job because your jobs are executed with pageable cache and not in-memory, hence those files are needed while running the job.
Arun

Is there any impact if we delete the indeces on Ods

Hi Experts,
The data does not get updated until and unless we activate the indices of ODSes .This has to be done everytime, when we are loading data from ODS.
We are facing the problems in WBP900 as we are loading data from ODS to infocube .
Is there any impact, if we delete the indeces please let me know.
Thanks In advance
Sivanand

Deleting index will not create any problem , but if the indexes are used by the queries and if the indexes are relevant, then..
But you can always rebuild the indexes.
Ravi Thothadri

Mobile not covered under warranty for hairline INTERNAL crack appearing without fall or any impact

Job No. W115041604910
I own a Sony Xperia Z1 compact mobile, which I purchased on 29th July, 2014, and around 11th April, 2015, I started to face touch screen problem in the middle region of my mobile. I was playing games on my phone when this issue cropped up.
The issue was very strange as at times the phone would start typing on its own on security pin screen. This lead to all my data being erased!
Later, I noticed that the lower part of the front screen of my mobile had a hairline crack - this was strange as my phone did not have any fall or any impact that would result in an INTERNAL hairline crack with no impact on the exterior of the screen.
I took my mobile to the authorized Sony service center in Koramanagala (Vigneshwar Services) on 16th April, 2015 and on 23th April, 2015 I was provided an estimated bill of Rs. 6000/-.
When I escalated the case by writing to "[email protected]", after multiple call and email exchanges, I was provided the "management" response on the Sony letter head stating that "the display was broken and needs to be replaced for satisfactory working of the set and the service estimate for the faulty part is Rs. 6007/-."
I declined to approve the amount for my repair, as my phone is within the warranty period.
Please go through the spec of Sony Xperia Z1 Compact on the below website, where it clearly says that the display is shatterproof;
http://www.gsmarena.com/sony_xperia_z1_compact-5753.php
Firstly, since the Spec claims that the glass is shatterproof, the crack on my mobile does not void the warranty.
Secondly, since the hairline crack on my mobile has appeared under "mysterious" circumstances and not a result of any fall or human error on my part, I decline paying any repair cost for my mobile. Also, this is an INTERNAL crack only, which will not appear due to a fall.
Thirdly, I should not be penalized for the faulty design issue for this model of Sony mobile.
At one point I would patronize with brand Sony, but sorry to say that is no longer true due to the trauma in dealing with Sony Service Center and Bangalore Regional Office.

I have already contacted the local Service Center and they are adamant on saying that I need to pay for the replacement of the front glass.
My question;
1. I have repeatedly told that my handset has an INTERNAL crack, which has appeared without any fall or impact. I believe that it is a design fault for which I SHOULD NOT be penalized.
To support my words, I find that similar issues have been reported for the same model across the globe;
http://conversation.which.co.uk/technology/sony-xperia-z-cracking-phone-screen-replacement-repair-wa...
Mine is not the only case wherein such cracks have developed. In UK, Sony has already confirmed this issue and agreed to replace the faulty units free of cost. Please read the link below and watch the video as well.
http://www.xperiablog.net/2014/05/30/bbcs-watchdog-investigates-xperia-z1-cracking-screen-issue-sony...
If in UK, this issue has been owned up by Sony company, should the same not be done in India, as ultimately it is Sony and region should not be a bar for taking such decisions especially in case of design flaws.

Error while copy the plant from 0001 ref available.

Dear All,
when i am copy the plant from 0001 ref plant i am getting the following warning message.
can you please tell me how can i avoid this warning & whats the impact.
and tell me if any other setting i has to do for plant creation through 0001 plant code.
Plant 0001 copied to 7102 without 4 number range
objects
regards,
Dinesh

Hi Dinesh,
You need not change any setting in the 0001 plant as this is the Standard SAP Plant.
Regarding the error you are getting you need not worry, i do not think it will have impact on the apllication objects.
You can ignore this message but make sure that you record the Error somewhere in case of any future references.
Thanks
Sunil Kumar

PR has been released, but i found the plant input is error.

PR has been released, but i found the plant input is error. i want to correct the plant, and i wish the release info is saved, i.e. the manager needn't release the pr again. is it posssible?

Hi,
You can modify the PR but will the changes trigger the Release strategy depends on the configuration which is done in your system.
If the Release Indicator is assigned for triggering the RS if there are any changes in PR the RS will get triggered and if it is not assigned it will not trigger.
Please check the Release indicator configuration on weather the Indcator are set for changes.
Thanks,
Vijay

How do I remove an extra editable region in the head of a specific page?

I have a single-template website. My template has the standard two editable regions in the head ("title" and "head"). Somehow, one of my pages ended up with three editable regions in the head - two named "head" as well as title. My template won't update this page because the editable regions don't match. How do I remove this extra editable region from the head of the page? I can't modify it on the page itself, of course, and I can't remove it by modifying the template because it's not part of the template.
Thanks in advance!

Your child page would not contain any editable regions if it wasn't attached to a Template. Perhaps you nested templates which is the wrong thing to do.
Go to Modify > Templates > Detach from Template.
Nancy O.

Is there a limit on number of object links to DIR, and any impacts of this

Hello All,
Can you please let us know if there is any limit on the No of Object links to be maintained in the Object Link tab of DIR,
Our major Concern comes as there is One DIR logo / symbol, which is maintained in most of the Material Master around 1000s
and also the same DIR is used in all the Service and maintenance Notification as an Attachment, so the list of Object link in DIR Object link tab is going beyond control above 10000s,
i wanted to know if there is any limit on no of Object links to be maintained in DIR object links, and is there any impact on DMS functionality if the list is ever increasing,
( also can i know if there is any workaround that the DIR is only displayed going in to Material master or Notifications but the same is not listed in the DIR object links tab as here it is going on increasing,)
Thanks and kind regards
Kumar S

Hello Christoph and Every one,
Thanks for the responses given, and providing a hint not to have many Object links, as it could be an performance issue going to the DMS DIR Object link TAB,
But in this particular case we are not assigning the Objectlinks going by the DMS Object links TAB, but it is done in other way round, going by the Equipment or Notification Screens,
There are few Health and safety document ( Which is created as a DIR in DMS) which needs to be assigned in Most of the Equipment and the new notifications created, and this document DIR is assigned from the Equipment and notification Screen,
And we may not be interested to go to the DIR to browse and Assign the Object Links, so as we do not frequently go and check the DIR or Use DIR Object link TAB for Object Link assignment will it in any ways cause performance Issue here??
And also as asked earlier can we have a one way attachment like the DIR is Visible in the Equipment or Notification Screen, but the DIR is not adding up the Equipment or Notification details in its Object links TAB, (by development or it is totally illogical to ask for)
Thanks and Kind regards
S Kumar

How to find a region in the Arrange Window

I'm trying to find two audio files that are apparently in regions in my arrange window on Logic 9. I can see them in my Audio Bin but I have no idea where to find them in my Arrange Window. I don't know if they're wedged in between or underneath a hundreds of other regions (yes I have that many regions).
Is there a method or shortkey I can use to find these specific regions? You know...like a "control F" for regions in the Arrange Window? Ideally I want to get rid of these files but I don't want to have any "ghost regions" that might complicate things. I just like to have everything nice and clean.
Thanks for any help.
p.s. In case someone asks these questions I already have answers:
Q1: Why can't you just find the regions you're looking for manually?
A1: Because I have too many regions in my Arrange Window.
Q2: Why do you have so many regions?
A2: Because that's how I work. The number of regions I have shouldn't be related to the efficiency of looking for specific regions.

You could check if the regions may exist inside a take folder, a normal folder, or press H to see if you have any hidden tracks.
But if you are brave enough to try to soft-delete all the other regions from the Bin, it should be easy to find the two remaing ones in the Arrange window, unless you also have a lot of MIDI regions. What happens if you select all the regions in the Audio Bin (Command-A), Shift-click on the two regions you talk about to deselect them, and then (temp.) delete all the regions in the bin? You can Undo this afterwards, but NB: remember to select "Keep" (and "for all") if you are asked whether you also want to delete the recordings from the hard disc itself.
"Zoom To Selection": select a region (not a file) in the Bin, activate Arrange (eg by pressing tab one of more times until Arrange has a white-ish frame), and then press Z on your keyboard. This will zoom in on the selected region, another Z will show the whole arrangement again.
"Play from Selection": press Shift and Enter.

Jquery accordion where we can open more than one region at the same time

Hi,
I am trying to create a jquery accordion where we can open more than one region at the same time. I saw a post
from patrick to do accordion where we can select only one region at a time.I am using Apex 4.0
Using jQueryUI Accordion with APEX 4.0
Any input on this will be appreciated.
Thanks,
Nav

Hi,
As I understand jQuery UI accordion do not have feature you looking for
Regards,
Jari
Edited by: jarola on Sep 7, 2010 12:29 PM
See documentation from here
http://jqueryui.com/demos/accordion/#default

External processing in the plant as vendor under same company code

Hi friends,
In our project under implementation we have following scenario.
we have 4 plants under one company code. one of the plant does powder coating as manufacturing activity. Other 3 plants sends components to the powder coating plant for coating purpose.
In IDES Standard scenario of external processing, a purchase requisition is raised thro info record maintained for the external operation. This scenarion works if the vendor is external.
In our case, the vendor is one of the other plant under same company code/client. Also the powder coating needs to be done without any profit margin for internal customers.
Our FICO guys have the opinion that, intra plant can't be a vendor; because raising invoices among plants under the same company codes is against accounting standars.
If anybody has faced this type of scenario nd found the solution, Please share it here.
Thanx in advance

Hi Shiva
STO scenario
You can not create only STO as you need to send the unpainted components to another plant through SAP & have them painted back with only payment of paining charges without margin.
Subcontracting scenario
You can not create the Subcontracting PO as this is not your external vendor.
Does this involves excise?
Then the PR/PO ctreated should be of combination of STO and subcontracting. If so this is not possible, as item category is the only field in PR/PO that identifies it as STO and subcontracting. obiviously it cann't have 2 values.
My suggesion on this as...
Create a BOM for painted component with sp procurement key as produced in another plant(paining plant). this will have STO cretaed for paining plant. This will inturn cretae a production order in painitng plant.
The BOM in painting plant will have the unpainted component with sp procurement key as produced in another plant ( fabricated plant) this will have STO created for unpainted components.
I hope I am clear & not confused you much.
Regards
Mahesh
Regards
Mahesh

Region in the Plant - Any impact?

Similar Messages

Maybe you are looking for