Region into another one

Hi! I'd like to know if there's a way to create a region into another region. The thing is I have on one of my pages an item with several check boxes and we need to assign like a fine gray box for the entire item, I mean, to separate from the rest of the items. The only thing we can think of is to create like a subregion with that item (with the checkboxes) into the main region, but is that possible?
thank you very much.
Daniela.

Hello,
Unfortunately with how HTML DB lays things out that's a bit harder to do within a single, region the labels get messed up and there is less consistency. If you need exact form layout I would do something more like this, building your forms this way you can build some very complex layouts.
http://htmldb.oracle.com/pls/otn/f?p=11933:30
Instructions for this example can be found here
where can I modify the content of #BOX_BODY#
Carl

Similar Messages

I want to sign out of current apple id and into another one but I no longer have access to my current email address so I cannot log out

I want to sign out of current apple id and into another one that I own but I no longer have access to my current email address so I cannot log out (It is with an internet provider who I have just unsubscribed with) This is on an iPhone 5S, on iOS 8.1.

That email address is still a valid Apple ID. If you do not remember the passcode, sign onto Manage your Apple ID (Apple - My Apple ID) with that email address, and then click on Reset Password. You will be asked to answer your Security Questions in order to reset the password. If you do not remember the answers to your Security Questions, contact Apple Support to reset them for you:
ACCOUNT SECURITY CONTACT NUMBERS
Cheers,
GB

I want to import one imovie project into another one. In other words, I have created a short sequence in iMovie 11 on one computer, and I want to import it into a project that I am working on, on another computer.

I want to import one imovie project into another one. In other words, I have created a short sequence in iMovie 11 on one computer, and I want to import it into a project that I am working on, on another computer. I copied the project files onto a hard drive, and then connected that drive to the Mac that my main project is on, but when I select "import" the files are faint gray -meaning I can't select them. Help! I want to transfer a sequence of shots from one iMovie 11 project on one computer, into another iMovie 11 project on another computer.

Tell me it ain't so!
I wish I could. The research you've done is correct.
Wether you copy and paste or rebuild the Project from the other computer, you're going to need to get your Evnets copied from the other computer.
The Prjoject files only contain pointer back to the original media.
Matt

My Iphone 4 is changing screens without me touching it. I will be in a msg and it will jump out of that msg and into another one... can anyone please help me with what this could be?

my Iphone 4 is changing screens without me touching it. I will be in a msg and it will jump out of that msg and into another one... can anyone please help me with what this could be?

Try the basics from the manual.
restart.
reset.
restore.
iPhone User Guide (For iOS 4.2 and 4.3 Software)

HT1918 Dear Support team, I would like to change my account region into another zone, but my balance of account is Usd 0.22. Please kindly reset it into zero so that I can proceed. Thank you.

Dear Support team, I would like to change my account region into another zone, but my balance of account is Usd 0.22. Please kindly reset it into zero so that I can proceed. Thank you.

We are fellow users here on these forums, you're not talking to iTunes Support nor Apple. You can try contacting iTunes Support via this page and ask them if they can remove the balance so that you can change countries : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

Copying a flash file and pasting into another one...

I want to copy a .swf file I have and paste it into another one, frames and all. I have tried but nothing gets copied over correctly. Either that or my buttons are on a single frame.. and no longer act like a button with the -Over-Up-Down-Hit frames. Can this be done? please help...
Thanks Guys,
-Dedikation-

Select all of the timeline frame, right click the selection and choose Copy FRames. In the other file, Insert -> New Symbol -> MovieClip... etc... select the one keyframe in the empty movieclip's only layer, right click the selection and choose Paste Frames. All layers and frames should paste in as they were copied.

Windows's Restoration wizard is no longer recognising the WindowsImageBackup, when moved from one external HD into another one.

Hi,
I created WindowsImageBackup a three-month period ago and saved it on an external hard disk. Then, I have moved/cut this WindowsImageBackup from the external hard disk was first saved on while created into a subfolder
on another different external hard disk. Whenever now clicked 'advanced recovery methods', then chose use ' a system image'. However, when I booted into Windows environment, I didn't see that the external drive containing image wasn't listed, although I have
clicked on 'refresh' while external drive is plugged. When clicked on the 'advance' button, then click 'located driver if the drive isn't listed' link, I could naviaged into the external hard disk, which means it is recognised by Windows and it doesn't need
a driver.
NOTE: the image is for the same OS installed on my computer.
I really want to keep many full different Windows Image Backups, then when create Windows Image Backup, I moved it into subfolder in order the next new don't delete the older one.
I was expecting that this is because while external HD containing image is plugged in the USB3 port, however, when I let it plugged in the USB2 port, the drive wasn't listed in the list
A man should convert his anger and sadness into strength to continue living in this life.

Thanks a lot,
NOTE: system image Disc containing(old images, WindowsImageBackup1,2,3, and so on) wasn't listed/found, and not the Restoration failed
Let me give you this scenario:
I have created a Windows image backup for OS partition(C) and Data partition(D). Second: I have saved the created image into an external hard disk
Third: When the WindowImageBackup created in the external hard disk. I tried booting into Windows environment, and the wizard found the image automatically.
Froth: I have moved the 'WidnowsImageBackup' from a partition on an external hard disk (A) into another external hard disk(B)
Fifth: I have done some changes on the OS system(such as installing programs and so on) and data partition(such as adding data and so on)
Fifty: I have decided to create a new WindowsImageBackup and save it into external disk 'B', but before that I have done, I must rename 'WidnowsImageBackup by incrementing '1' after 'WidnowsImageBackup' in order ton not be overwritten.
Sixth: I created the new 'WindowsImageBackup'
The WindowsImageBackup just created is recognised by Windows's resoration wizard because it wasn't moved. However, windowsImageBAckup1 isn't recognised because it wasn't saved here, however, it was pasted here from another location.
I would like to save many full images:
WindowsImagBackup
windowsImageBackup1
-------------------------2
-------------------------3
and so on.
However, as I said before, when booting into Windows's restoration wizard, then clicked on 'selcte an image', I didn't find any option to search for the image.
Yes, there is an option saying 'if you don't see your 'system image disc' listed in the image location, then you can pluge your disc and click on refresh. I have done but only the 'WindowsImagBackup' created on the same external disc was
found. Even those images created in same external disc, but their main folder 'WindowsImageBackup' changed into 'WindowsImageBackup1, 2, 3 and so one were not found'
If someone wants to save many full WindowsImageBackups, then how can he be doing?
NOTE: Although I have read in the Windows help support what is below, I when I have copied the older system images into another locations, they became unrecognised/found in the restoration Wizard:
Keeping different versions of system images
If you're saving your system images on an internal or external
drive, or on CDs or DVDs, you can keep several versions of system images. On
internal and external hard drives, older system images will be deleted when the
drive runs out of space. To help conserve disk space, you can manually delete
older system images. For more information, see What backup
settings should I use to maximize my disk space?
If you're saving your system images in a network location, you can
only keep the most current system image for each computer. System images are
saved in the format of drive\WindowsImageBackup\computer
name\. If you have an existing system image for a computer and are
creating a new one for the same computer, the new system image will overwrite
the existing one. If you want to keep the existing system image, you can copy it
to a different location before creating the new system image by following these
steps:
Navigate to the location of the system image.
Copy the WindowsImageBackup
folder to a new location.
A man should convert his anger and sadness into strength to continue living in this life.

Placing an image into another one

Please help me with the following problem:
I'm trying to place an image inside another one. So, I used the magntic lace tool to make the selection, and then copied it and pasted it onto the other image, but only the outline of the shape appeared.
At first, only a white shape of the image appeared, but after changing some settings (I don't remember which) only the outline of the shape came up. I want the actual image to appear! How can I do this?

Thank you for that. The cracker package appears to only be the Background (Frondo) Layer, so there should not be an issue with the wrong Layer there.
I'd run that test mentioned, and just use the Rectangular Marquee Selection Tool, to do a rough outline of the cracker package. You will be on the Background Layer, so that a Copy should capture all of the pixels in the Selection. Then, go to the shot of the men, and Paste. Depending on the resolution of the two Images, you might need to do a Ctrl+T (Free Transform), to Scale, Rotate and also locate that new Layer to suit. Note: to constrain the Aspect Ratio of the pixels in that Pasted Layer, just click on a corner (little square), and hold down the Shift key. You can locate the Layer, as required, by either click-dragging inside the Bounding Box, or by using the cursor keys, or Shift+cursor key (larger increment of movement), until satisfied. Then hover the mouse's cursor outside the Bounding Box, but near a corner, and you will then see an arc with two arrowheads. Just click and move the cursor to Rotate. When done and satisfied, hit Enter, or Dbl-click inside the Bounding Box.
That should do the trick. If not, then please let us know more.
If all is well, it's a simple matter to create a Layer Mask for the cracker package Layer. To create that Layer Mask, one can use an number of Selection Tools, or the Pen Tool to create a Path to be turned into a Selection (my choice for situations similar to yours), that will become your Layer Mask to hold back the extra background pixels from the Rectangular Marquee. The beauty of a Layer Mask is that you can always go in and refine it. You can also directly paint onto, or paint away that Layer Mask. By using a small, soft-edged Brush, you can refine the Mask neatly. If you make a mistake there, or wish to add/remove from that Mask, just hit the X key to swap the colors of the Brush from black to white and back. I like Layer Masks for the level of refinement, and also for the ability to come back in and edit, as all you are doing is holding those extra pixels out of the Image, years later. Just be sure to do a Save_As PSD with the Layer and Layer Mask.
Good luck, and hope this helps,
Hunt

I had two files named graphics and I replaced one graphics file with another which was the wrong one. Can I undo my replacement? I move the wrong one, which was on my desktop into another one and that is when it as me if I wanted to replace the file.

I accidently replaced a file with another. Can I undo my action?
I had two files named graphics. One was on my desktop and another was within another file called solitarie. I move the one on my desktop (wrong file) into the solitarie file and was asked if I wanted to replace the graphics file in the solitarie folder (the correct one). I said yes accidently and then remembered that I had made a mistake. If I use undo, it only move the wrong file back to the desktop. Is there an undo of replace?

Sorry, but's that's why you get the warning. "Replace" means just that - the new file over-writes the old one. There is no undo.

When copied/pasted, My contents in a project won't paste into another one.

I have 1.5 hour worth of video in one project, and 1.5 hours worth of pictures in another project, but when I copy either one of them, and paste it into the other project, it doesn't paste and acts as if I didn't paste it, and then freezes up...which means i have to force quit it. how do i fix this?

What might be easier and less taxing on iMovie is to just output each project individually (iMovie is not really stable with longer video over 1hour in length). Go to Share > Export Movie.. (choose Large Size) > And save it to the desktop. Export both projects separately from one another. Then create a new Event Folder, import both of those projects into that new Event. Then drag them both into a new project then Export Movie... to the desktop. That should keep iMovie from becoming unstable and crashing.

Automatic copying row from one table into another one

Hi,
I am looking for some help on how to do the following:
I use Number to track my finances. I have two tables - one for my checking account and the other one for my cash account. When I withdraw cash from my checking account I record a transfer or debit transaction in my checking account table (in the type column of this table I enter "transfer" and in the category column of this table I enter "cash account"); Obviously I have to record a matching transaction in my cash account where the category column shall read "checking account". Both records represent one and the same transaction. In order not to enter this transaction twice I would like to "automate" this process so that once I enter the transaction in either of the two table (checking or cash) the matching entry automatically appears in the other table. Is there any way to do this.
Thank you,
Evgeny

You can use Connection#getMetaData() to retrieve information about the tables and the columns of the table.
After all, it is better to gain information about the table first and then issue a query in the form of "INSERT INTO table1 SELECT * FROM table2", including the eventual column selections and/or data conversions at SQL level.

Tranfer a picture into another one

How do I take out a picture from a photo and add it to another photo in Photoshop ?

Rick,
Try this:
In Editor, go to the expert tab.
Open picture B, the one you wish to select something from to add to another picture.
Use one of the selection tools, e.g. selection brush, lasso tool, to select the object. You will see an outline ("marching ants") once the selection is complete
Go to Edit menu>copy to copy the selection to the clipboard
Open picture A, then go to Edit>paste
Use the move tool to position object from picture B.
In the layers palette you should see picture A as the background layer, and object B on a separate layer.

How can I [cmd]+A including text boxes? Or how to import one Pages document into another Pages document?

Hi there,
I am working on my thesis with several Pages documents (for the first time). And I really have searched all over the Internet to find an answer to exactly my question but I cannot find it.
First my question was: How can I import one Pages document into another one? I found the answer on that (I think) and there is nothing else than just make a new section and copy/paste it in.
But then another issue pops up: I cannot [cmd]+A my whole document including the texboxes to paste it in the other Pages document. Then the document will be paste without the textboxes (and I have quite a lot of them in that document) and the text will not be at the right place.
So please explain to me: How I can combine two Pages documents and keep them exactly the way they are? Is that even possible?
I thank you so much in advance!

Hi Fruhulda,
I have already tried to mark the textboxes in line but that did not work, and besides then the text and the boxes won't be at the rigt places either. Thank you for your reply .

After I have migrated a 'master' profile into another, the browse button (for a download location) in Options, General doesn't work anymore. How can I fix this?

Hi Supporters,
I've been struggling with this some time (downloading / saving problems) and tried all kinds of variations. But I'll keep it simple for now.
As a test .. I've just created a fresh firefox profile. Checked out if could change the download location, through the Browse button, and indeed that worked. I got an explorer dialog to choose a folder.
Normally I would do the options, manage the search engines, do some layout stuff etc etc in order to get some 'baseline / master' profile I can evolve further into other more extended profiles. So you see this master profile will get copied into another one.
But, having copied that fresh profile (having done nothing yet) into another seems to disable choosing another download folder. The Browse button in Options > General does not work anymore.
There's more. If I browse to, say, C:\ as default download location but then enable 'ask me where to save ..' in the fresh profile and then copy this profile to another one .. if I then want to change the download location (which shows C:) it jumps to Desktop and again the Browse button won't work.
This is driving me mad. Any ideas? Sorry for the long story, hope it helps.

Hi guys,
@cor-el: getting rid of not needed parts is what I always do. Besides prefs and localstore, only the search-metadata and permissions / signons are passed along. Oh, forgot to mention the mimetypes.
No, my point is why is FF looking for those folders when there's no mentioning of these to be found in my options? Not even in de about:config ... When I state C:\ as my downloads location it's absurd to check any other folder first, which FF seems to do before giving me an explorer window showing .. C:\ as a starting point. Like my unrestricted laptop does.
@jscher2000: Even if there are pointers to those default folders, FF should not be checking those. When I state C: I mean C: (see my answer above).
No, I'm convinced this is a bug unless someone knows a way to stop that folder checking. And to be honest, the not working Browse button is the least of my problems (I use: ask everytime where). No it's the saving that is the problem. But I guess the underlying problem is the same. Saving / downloading, what's in a name ..
Guys, thanks for your help ! I can't fix a bug so I'm going to let it be. I'll rebuild my master and will keep checking of saving a website becomes a problem somewhere. Mind you, the solutions offered in kb.mozillazine.org/Unable_to_save_or_download_files didn't work.
Oh well, I'll keep my fingers crossed :)

Place one IDML file inside another one.

I want to place one or more IDML files into another single IDML "master" file.
The master file is sort of a template for a site layout. The IDML files I need to embed represent single content boxes with specific layouts. The files for those content boxes are created outside of InDesign with some texts I get from a database.
To retain those layouts I deemed it best to just place them into another document which is no problem with INDD but just with IDML.
I managed to link multiple INDD files into the master file in InDesign itself, but can not figure out how to link IDML files. I also found that it is possible to link INDD files into IDML files, just not IDML into IDML.
I need to be working with IDML as opposed to INDD because I have to be able to manipulate the files in an easy way outside of InDesign.
Is there any way to link IDML files into other IDML files? Or if not, is there a possibility to convert my IDML files to INDD files without having to use a real instance of InDesign?
Relevant Lines of code from the master IDML file taken from the Spread.xml file:
<Link Self="u9f81" AssetURL="$ID/" AssetID="$ID/" LinkResourceURI="file:/path/to/subtemplates/box2.idml" LinkResourceFormat="$ID/InDesign Format Name" StoredState="Normal" LinkClassID="35906" LinkClientID="257" LinkResourceModified="false" LinkObjectModified="false" ShowInUI="true" CanEmbed="true" CanUnembed="true" CanPackage="true" ImportPolicy="NoAutoImport" ExportPolicy="NoAutoExport" LinkImportStamp="file 130505142560000000 1396736" LinkImportModificationTime="2014-07-22T16:50:56" LinkImportTime="2014-07-23T11:42:22" LinkResourceSize="0~155000" />
If I leave this in and try to open the file in InDesign I get the error message that the linked file type is not supported
<Link Self="u9f81" AssetURL="$ID/" AssetID="$ID/" LinkResourceURI="file:/path/to/subtemplates/box1.indd" LinkResourceFormat="$ID/InDesign Format Name" StoredState="Normal" LinkClassID="35906" LinkClientID="257" LinkResourceModified="false" LinkObjectModified="false" ShowInUI="true" CanEmbed="true" CanUnembed="true" CanPackage="true" ImportPolicy="NoAutoImport" ExportPolicy="NoAutoExport" LinkImportStamp="file 130505142560000000 1396736" LinkImportModificationTime="2014-07-22T16:50:56" LinkImportTime="2014-07-23T11:42:22" LinkResourceSize="0~155000" />
If I put this in everything works fine.
Notes: box1.indd and box2.idml are the exact same files, just saved differently by InDesign. The path to both files is a valid file system path and has full read/write access.

Thank you for your reply. I already know that it is possible to edit IDML files, which is what I am already doing.
What I am now looking for is a way to place one IDML file into another one like you are able to do with INDD files.
Which file format should I use insted then? It must be editable outside of InDesign because I need to be able to change texts and stylings within the file.
Laubender
That possibly means you have to have InDesign Server to integrate in your workflow.
That's the exact thing I am trying to avoid here.

Region into another one

Similar Messages

Maybe you are looking for