REGION MAP

Hello guys,
I have a problem, I created a Map Region, and in my table the name of the states are in UPPER CASE.
But how I have a map for the Brazil, I have a states like 'Rio Grande do Sul' and 'Rio de Janeiro', I think, that if I want to show one state, the label in the select must be equal to the label for the map. But how can I modify these labels in the map? Or another question, in map attributes, what is the Map Region Column attribute? And if I alter to REGION_ID or REGION_NAME?
Thanks
Raul Welter

Same issue here.
I am trying to draw our U.S. sales territories by Zip code (roughly 30,000 of them); it seems to start out OK, but after only 100-200 or so the PC stalls.
I've received the infamous Blue Screen Of Death too as a result of this (prior to actually seeing the BSOD though the screen will "flicker" a couple times; almost like it does when one goes to change the screen resolution.)
Disabling or enabling hardware graphics acceleration does not appear to have an affect.
My PC is a Lenovo T440P - 2.9GHz i7 - 16GB RAM - WIN7 64 bit
Currently Using Power Map - 16.0.2822.1000 (Not sure if this is the most up to date version, but it's what's on my machine.)<o:p></o:p>
And just in case someone suggests to send feedback via "Send a Smiley"; I've already done so, but immediately received a "Delivery has failed to these recipients or groups: [email protected]"
(Even though the original email was sent to "[email protected]")
ANY help or suggestions would be GREATLY appreciated!
Thanks in advance!!

Similar Messages

How can i add a new regional map component in xcelsius 2008 ?

hi,
we need to add a new regional map component in xcelsius 2008 , how can i do it ?
Where do I find any examples ?
Thanks

You might want to check out the Any Map Component found on the Marketplace: http://www.ondemand.com/information/xcelsius.asp. Then click on Visit the Marketplace to view all add-ons.
This is one of the cool components that the users created using the Xcelsius 2008 Component SDK.

Region map creation causes system crash

Hello,
I am new to power map (in 32 bit excel/offfice 2013 professional plus). I have tried to create a region map and get this blue screen error
"pc ran into a problem -something something something - it went to fast,
but i did see "system_service_exception" somewhere in the message
i have windows 8.1 installed,
i don't know what other info to provide, as i haven't had a laptop crash since maybe windows xp.
any help would be greatly appreciated.
thank you
tracy

Same issue here.
I am trying to draw our U.S. sales territories by Zip code (roughly 30,000 of them); it seems to start out OK, but after only 100-200 or so the PC stalls.
I've received the infamous Blue Screen Of Death too as a result of this (prior to actually seeing the BSOD though the screen will "flicker" a couple times; almost like it does when one goes to change the screen resolution.)
Disabling or enabling hardware graphics acceleration does not appear to have an affect.
My PC is a Lenovo T440P - 2.9GHz i7 - 16GB RAM - WIN7 64 bit
Currently Using Power Map - 16.0.2822.1000 (Not sure if this is the most up to date version, but it's what's on my machine.)<o:p></o:p>
And just in case someone suggests to send feedback via "Send a Smiley"; I've already done so, but immediately received a "Delivery has failed to these recipients or groups: [email protected]"
(Even though the original email was sent to "[email protected]")
ANY help or suggestions would be GREATLY appreciated!
Thanks in advance!!

I have a problem with FP 13 in that a Council website with a regional map viewer will not now open.

I have a problem with FP 13 in that a Council website with a regional map viewer will not now open. The site was designed around FP 10 and the link they have to download FP 10 nowalso directs to FP 13. I followed the "How to revert to FP 11.7 (Chris Campbell Oct 2013) along with the uninstall instructions link and now have both zip FP 10.3 and zip 11.7 in my downloads. I attempted to run FP 11.7, the "winax" file for IE after unzipping it but I am blocked bya window that says I cannot do this and must install FP 13. The only choice in this window, other than downloading is QUIT. What is the best approach now. The website is Auckland Council and the window concerned is "GIS Viewer". neither Chrome or IE will open it.

Hi 34wiki,
There is only one uninstaller for Windows that will uninstall both 32- and 64-bit versions of the Flash Player. At one point there were two separate installers (one for 32-bit OS and another for 64-bit OS), but that has not been the case for a long time. Based on the error, it's possible you may using an older version of the uninstaller (to find out the version of the uninstaller, right-click on the file, select properties, then the 'details' tab). The latest version is always posted to this link, and will work on both 32- and 64-bit operating systems. If you get the same error using this uninstaller, please post the contents at the end of the FlashInstall.log file, that show the uninstall attempt. Since you have a 64-bit OS, there will be two files at the following locations:
32-bit: C:\Windows\System32\Macromed\Flash
64-bit: C:\Windows\SysWOW64\Macromed\Flash
Maria

Updating country and regional maps with Nokia Suit...

Hi Folks
I am an E72 owner and a frequent user of Nokia Maps. Hence I use Nokia Suite to keep the map data up to date, time to time.
I normally download all countries by right-clicking the ALL item and choosing 'download all'. I thought I could download all available maps this way. But when all downloads are finished, I still can see some regional maps are NOT downloaded as the 'download' button is available for the regions.
Initially, I thought the regional maps of a country were NOT necessary if their country map has been downloaded simply because the country map should cover its all regions (comparing the map size of a country and its regions, and the regional maps were not automatically downloaded by default)
But it seems not that ture, at least for the latest map data v0.1.29.100.
As shown in the attached screenshot, for some countries, e.g.China, France, India, Italy, Spain and USA, some regional maps were automatically downloaded though most regional maps remain undownloaded (the 'download' button is available).
Why? Only those regional maps have been updated?
Do I really need to download ALL regional maps to keep all data up to date?
FYI
Model: E72-1
Type: RM-530
Software Version: 091.004
Software Version Date: 02-Jun-2012
Custom Version: 091.004.C00.01
Nokia Maps v3.04 10wk32 b04 MW OpenGL L MN
Map version 0.1.29.100
Nokia Suite 3.7.22
Any comments please?
Regards,
bbao
bbao
* If this post helped you, please click the white Kudo star.
* If this post has solved your issue, please click Accept as Solution.
Attachments:
Scr000078.jpg ‏44 KB
Nokia_Suite.Maps_1.jpg ‏150 KB
Nokia_Suite.Maps_2.jpg ‏156 KB

bbao wrote:
Thanks so much for effort farby and scoobyman.
It is interesting that the World Maps of scoobyman's E52 does not show any regional maps of China. The regional map of Heilongjiang will not appear in scoobyman's Nokia Suite, as there is no triangle symbol before 'China' indicating no regional maps for China at all. That definitely looks like the same thing that I saw on my E72 before updating to 00.01.29.100 map data.
First, scoobyman 's post has created confusion as he has not checked the same way as OP has done. He has checked selecting Maps and Voice Guidance on Phone at the bottom and not by selecting All under Maps at the top. If you see both attachments posted by me you can see the difference how they are displayed.
bbao wrote:
Yes, farby's India map with Nokia 5800xm seems having totally different map data. e.g. India map: 532 MB vs 372 MB, and Delhi map: 51 MB vs 33.7 MB.
BTW, it notice that you both are using a new version of Nokia Suite 3.8.13 Beta. Not sure if it could make any difference.
Whether Maps version is same or different is not the point. Even if the Maps version is different in both the cases it is being displayed the SAME way as OP ..only difference being the sizes of the data files ...

Updating regional maps

For larger countries like France, the maps are divided into regions. My French geography isn't great, hence wanting the maps! I know roughly where I;m going, i.e.. Le Havre - Loire valley & back to Dieppe, how can I tell which regional maps I need without putting each name into Google maps to find out?
Nokia N8 on Belle

@davej65
Normandy, Center, Limousin, Poitou-Charentes & Pays-de-la-Loire should suffice.
Happy to have helped forum with a Support Ratio = 42.5

ISupport Page Region Mapping table

Hi,
Can someone please point me to the iSupport Page Region Mapping database table?
Finding information from front-end is a little bit of a task.
Kind Regards.

Hi,
This EO query could be of help :
Select PageRegionMappingEO.source_context_target_id, PageRegionMappingEO.source_context_type_id,
PageRegionMappingEO.OBJECT_VERSION_NUMBER, PageRegionMappingEO.CONTEXT_VALUE1, PageRegionMappingEO.CONTEXT_VALUE2,
PageRegionMappingEO.CONTEXT_VALUE3, PageRegionMappingEO.SEED_TARGET_VALUE1, PageRegionMappingEO.SEED_TARGET_VALUE2,
PageRegionMappingEO.CUST_TARGET_VALUE1, PageRegionMappingEO.CUST_TARGET_VALUE2, PageRegionMappingEO.CREATED_BY,
PageRegionMappingEO.CREATION_DATE, PageRegionMappingEO.LAST_UPDATED_BY, PageRegionMappingEO.LAST_UPDATE_DATE,
PageRegionMappingEO.LAST_UPDATE_LOGIN , CSCT.Source_Code, PageContent.Meaning pageName, CSCT.Context_Type,
contextContent.meaning contextMeaning, '' SR_Type_ID, '' respon_id, '' appl_id, '' SR_Type_Meaning, '' respon_meaning,
'' appl_meaning
from apps.CS_CF_SOURCE_CXT_TARGETS PageRegionMappingEO, apps.CS_CF_SOURCE_CXT_TYPES CSCT, apps.FND_LOOKUP_VALUES_VL pageContent,
apps.FND_LOOKUP_VALUES_VL contextContent
where PageRegionMappingEO.source_context_type_id = CSCT.source_context_type_id and PageContent.lookup_code = CSCT.Source_Code and PageContent.lookup_type = 'IBU_CF_PAGE' and contextContent.lookup_code = CSCT.Context_Type
and contextContent.lookup_type = 'IBU_CF_CONTEXT_TYPE'
--and PageRegionMappingEO.source_context_target_id = :1
--and PageRegionMappingEO.last_update_date like '12-JAN-10'
ORDER BY LAST_UPDATE_DATE DESC;
Regards,
Mohammed

Why is India by Region Map not a component?

I am working with a client who needs worldwide global sales based on region. India is one of the prominent regions whose map component I am unable to find in Xcelsius 2008.
I have installed SP3 and still can't find India Map.
How can I find this component?

Hi,
first you will need the anymap add-on from the BO marketplace:
[https://information.ondemand.com/istore/#shopby=Marketplace/Xcelsius%20Add-Ons%20(All)|https://information.ondemand.com/istore/#shopby=Marketplace/Xcelsius%20Add-Ons%20(All)]
Then you can download from reportex the map file for india:
http://www.reportex.co.uk/xc_maps.html
Regards
Victor

Power Map causes Intel HD Graphics Driver to crash or Blue Screen (BAD_POOL_HEADER)

Hello,
I have a user who is attempting to use Excel 2013's Power Map Add-in, however, he had this to say:
"I can regionally map counties without an issue, but the Zip Code mapping is
always giving me problems. It may be because there are so many zips in the
state."
He is using a Lenovo 440p laptop with Windows 7 Professional x64 and I have already updated his Intel HD graphics driver using the official driver tool from Intel, has well
as Lenovo's driver update software. Also, here are some screenshots below. Are there plans for a hotfix or can someone advise on a solution? Thank you.

same problem here, easily shows column, bubble or heat map but crashes every time when I choose region map. Trying to draw 64 countries and one single value column on a world map. any solutions?

Urgent help. Nokia Maps... Asha 309

I am unable to download and install offline maps... Says the data on memory card maybe corrupt. How do I fix.
Tried reinstalling software...
Help..!
Thanks!
Solved!
Go to Solution.

Just opening Nokia Maps application with newly formatted memory card should create the necessary folder structure to be recognised by Nokia Suite. You could try copying existing E:\cities and .qf file if present on memory card to folder on your PC for safe keeping and delete these from memory card and re-open Maps and try again to download regional mapping.
Happy to have helped forum in a small way with a Support Ratio = 37.0

N8 map problem PLEASE HELP!!!

i don't know why my device and ovi suite are giving me this issue. i did a delete data and restore after having issues with bubbles and sleeping screen, when they were in beta form. also something else was causing the phone to run slowly, i don't know what it was. after the delete and restorel, i re-installed the firmware 014.002. now everytime i plug in my mobile to my computer and i try to re-install the maps i get a message saying that i need to update my old maps. the thing is, i don't have any maps on the phone. i'm using Maps version 3.06 if that helps. i even tried delete data and restore, and re-installing the firmware again to see if that would help, but no success.
please somebody help me. i sold my GPS unit and was using the N8 as a replacement. it was doing an awesome job up until now. also i tried contacting nokia about the problem and their tech support seems to have reading problems and they keep telling me to do the steps i already did....

@wickedrandom
Whilst I would only ever advocate a "three key reset" upon S^3 device as a last resort due to erasure of data upon Mass memory amongst other issues, there is obviously something corrupted upon your device perhaps due to UDP = User Data Preservation feature which has not been cleared by your attempts so far.
It maybe that re-installation of complete software at a Nokia Care Point may be required to resolve this issue, which would also restore regional mapping included upon E:\ Mass memory.
Happy to have helped forum with a Support Ratio = 42.5

Map loader not recognizing phone

Hi everybody;
I have a new N95, updated all the software and have used maps at least once. Well, exactly once. After updating I went out and found a free WLAN and loaded the local map. Now back at my computer the map loader software says no medium detected please connect phone or card reader. My phone IS connected. This is as far as I can get since map loader shuts itself off.
Ideas?

Hi jp1159
In what mode is your N95 connected to PC by USB as default mode is "PC Suite" mode when it needs to be in "Data transfer" mode for downloading regional maps?
Happy to have helped forum in a small way with a Support Ratio = 37.0

Deactivating region (taskflow) when changing showDetailItem in panelTabbed

Jdev 11.1.1.4
I have a JSF page with a af:panelTabbed wiith two af:showDetailItem
In every af:showDetailItem I have a region mapping to the same task flow in both regions (in order to reuse).
The taskflow has to main steps: First one method call initializing some view objects and variables. the second a view displaying a JSF.
Every time the af:showDetailItem is changed (by clicking on the tab) I need the taskflow to be restarted and begin a new fresh copy of it.
To achieve this I have defined both af:showDetailItem like this
<af:showDetailItem text="#{viewcontrollerBundle['ALU.CERTIFICADOS']}" id="sdi1"
stretchChildren="first" immediate="true"
binding="#{backingBeanScope.pertanasSolCertCompBB.sdi1}"
*disclosureListener="#{backingBeanScope.pertanasSolCertCompBB.sdi1_disclosureListener}"*
partialTriggers="r1">
and
<af:showDetailItem text="#{viewcontrollerBundle['ALU.COMPULSAS']}" id="sdi2"
immediate="true"
binding="#{backingBeanScope.pertanasSolCertCompBB.sdi2}"
*disclosureListener="#{backingBeanScope.pertanasSolCertCompBB.sdi2_disclosureListener}"*
stretchChildren="first" partialTriggers="r2">
The sdi1_disclosureListener is defined:
public void sdi1_disclosureListener(DisclosureEvent disclosureEvent) {
activacionRegion activeRegionBean = (activacionRegion)resolveELExpression("#{activacionRegion}");
if (disclosureEvent.isExpanded()) {
activeRegionBean.setRegionCertificadosActivation(true);
AdfFacesContext.getCurrentInstance().addPartialTarget(r1);
AdfFacesContext.getCurrentInstance().addPartialTarget(r2);
else activeRegionBean.setRegionCertificadosActivation(false);
the sdi2_disclosureListener is defined more or less the same but opposite:
public void sdi2_disclosureListener(DisclosureEvent disclosureEvent) {
activacionRegion activeRegionBean = (activacionRegion)resolveELExpression("#{activacionRegion}");
if (disclosureEvent.isExpanded()) {
activeRegionBean.setRegionCompulsasActivation(true);
AdfFacesContext.getCurrentInstance().addPartialTarget(r2);
AdfFacesContext.getCurrentInstance().addPartialTarget(r1);
else activeRegionBean.setRegionCompulsasActivation(false);
The activeRegionBean.setRegionCompulsasActivation(false); and activeRegionBean.setRegionCertificadosActivation(false); is a bean controlling the binding of the regions in the page:
<taskFlow id="AlumnosSolCertificados1"
taskFlowId="/WEB-INF/Aumnos/AlumnosSolCertificados.xml#AlumnosSolCertificados"
activation="conditional"
xmlns="http://xmlns.oracle.com/adf/controller/binding"
active="#{activacionRegion.regionCertificadosActivation}">
<parameters>
<parameter id="TipoPantalla"
xmlns="http://xmlns.oracle.com/adfm/uimodel"
value="CERTIFICADOS"/>
</parameters>
</taskFlow>
and
<taskFlow id="AlumnosSolCertificados2"
taskFlowId="/WEB-INF/Aumnos/AlumnosSolCertificados.xml#AlumnosSolCertificados"
activation="conditional"
xmlns="http://xmlns.oracle.com/adf/controller/binding"
active="#{activacionRegion.regionCompulsasActivation}">
<parameters>
<parameter id="TipoPantalla"
xmlns="http://xmlns.oracle.com/adfm/uimodel"
value="COMPULSAS"/>
</parameters>
</taskFlow>
All this works ok when I click on B showdetailitem after intially having shown A. The task flow first terminates and then initiates a new taskflow.
But when I reactivate showdetailitem A clicking on it, the taskflow is first activated and then deactivated loosing all its initialization.
The problem is that ADF first executes always the conditional activation of the first showdetailitem and the the conditional activation of the second showdetailitem what is ok in one sense but not on the other because it closes the taskflow after having been opened.
Do I have any way to avoid this and control that the taskflow is always first deactivated and then activated ?

Jdev 11.1.1.4
I have a JSF page with a af:panelTabbed wiith two af:showDetailItem
In every af:showDetailItem I have a region mapping to the same task flow in both regions (in order to reuse).
The taskflow has to main steps: First one method call initializing some view objects and variables. the second a view displaying a JSF.
Every time the af:showDetailItem is changed (by clicking on the tab) I need the taskflow to be restarted and begin a new fresh copy of it.
To achieve this I have defined both af:showDetailItem like this
<af:showDetailItem text="#{viewcontrollerBundle['ALU.CERTIFICADOS']}" id="sdi1"
stretchChildren="first" immediate="true"
binding="#{backingBeanScope.pertanasSolCertCompBB.sdi1}"
*disclosureListener="#{backingBeanScope.pertanasSolCertCompBB.sdi1_disclosureListener}"*
partialTriggers="r1">
and
<af:showDetailItem text="#{viewcontrollerBundle['ALU.COMPULSAS']}" id="sdi2"
immediate="true"
binding="#{backingBeanScope.pertanasSolCertCompBB.sdi2}"
*disclosureListener="#{backingBeanScope.pertanasSolCertCompBB.sdi2_disclosureListener}"*
stretchChildren="first" partialTriggers="r2">
The sdi1_disclosureListener is defined:
public void sdi1_disclosureListener(DisclosureEvent disclosureEvent) {
activacionRegion activeRegionBean = (activacionRegion)resolveELExpression("#{activacionRegion}");
if (disclosureEvent.isExpanded()) {
activeRegionBean.setRegionCertificadosActivation(true);
AdfFacesContext.getCurrentInstance().addPartialTarget(r1);
AdfFacesContext.getCurrentInstance().addPartialTarget(r2);
else activeRegionBean.setRegionCertificadosActivation(false);
the sdi2_disclosureListener is defined more or less the same but opposite:
public void sdi2_disclosureListener(DisclosureEvent disclosureEvent) {
activacionRegion activeRegionBean = (activacionRegion)resolveELExpression("#{activacionRegion}");
if (disclosureEvent.isExpanded()) {
activeRegionBean.setRegionCompulsasActivation(true);
AdfFacesContext.getCurrentInstance().addPartialTarget(r2);
AdfFacesContext.getCurrentInstance().addPartialTarget(r1);
else activeRegionBean.setRegionCompulsasActivation(false);
The activeRegionBean.setRegionCompulsasActivation(false); and activeRegionBean.setRegionCertificadosActivation(false); is a bean controlling the binding of the regions in the page:
<taskFlow id="AlumnosSolCertificados1"
taskFlowId="/WEB-INF/Aumnos/AlumnosSolCertificados.xml#AlumnosSolCertificados"
activation="conditional"
xmlns="http://xmlns.oracle.com/adf/controller/binding"
active="#{activacionRegion.regionCertificadosActivation}">
<parameters>
<parameter id="TipoPantalla"
xmlns="http://xmlns.oracle.com/adfm/uimodel"
value="CERTIFICADOS"/>
</parameters>
</taskFlow>
and
<taskFlow id="AlumnosSolCertificados2"
taskFlowId="/WEB-INF/Aumnos/AlumnosSolCertificados.xml#AlumnosSolCertificados"
activation="conditional"
xmlns="http://xmlns.oracle.com/adf/controller/binding"
active="#{activacionRegion.regionCompulsasActivation}">
<parameters>
<parameter id="TipoPantalla"
xmlns="http://xmlns.oracle.com/adfm/uimodel"
value="COMPULSAS"/>
</parameters>
</taskFlow>
All this works ok when I click on B showdetailitem after intially having shown A. The task flow first terminates and then initiates a new taskflow.
But when I reactivate showdetailitem A clicking on it, the taskflow is first activated and then deactivated loosing all its initialization.
The problem is that ADF first executes always the conditional activation of the first showdetailitem and the the conditional activation of the second showdetailitem what is ok in one sense but not on the other because it closes the taskflow after having been opened.
Do I have any way to avoid this and control that the taskflow is always first deactivated and then activated ?

Nokia E71 -Hangs when we go to Maps

I recently purchase Nokia E71, Whenever i used to open the MAPS it hangs. I have waited for 5 or 6 hrs even it is not comming up. Everytime i needs to remove the battery and reset the Phone.
Is this the manufacturing defect of Phone or Maps will always hangs ?. Any users or moderators having such kind of problem.
Can you please suggest me.
Thanks

Hi roaming1977
I would check that in Menu > Tools > Settings > General > Positioning > Positioning methods that a valid network internet access point is defined, because if Assisted GPS feature can't get a network connection this can cause application to hang. Although in Nokia Maps application you can set "Go-online at start-up" to "always ask, no or yes" the Assisted GPS connection is a separate process. As you mention in another post that you don't have a "Data plan" then you need to DISABLE the Assisted GPS feature in "Positioning methods".
If it wasn't for need to backup essential data, I might have suggested a "hard reset" to return device to "out of the box" state to eliminate any possible software corruption. This would also be a good time to download latest version of Nokia Maps v2.0_4503 from here:http://europe.nokia.com/A4984199
Almost certainly this is a setting or software related problem and you would be also advised to download the latest regional maps to your device with Nokia Maploader on your PC.
Let us know how you are getting on and if you have any further questions.
Message Edited by scoobyman on 27-May-2009 11:14 PM
Happy to have helped forum in a small way with a Support Ratio = 37.0

Working with Groups, Region Data Somehow Misaligned Locations in Audio Files.. How to Realign?

Hello All,
I'm a nonexpert, so please excuse in advance any lack of knowledge that I probably should have. I've been heavily editing a recording of several days of jams for a long time, basically by cutting and aligning very disparate parts to form something new. I had been working with my drummer's audio tracks in group, so each would be aligned as I cut, pasted and stretched regions. Now to my dismay, the all of the kick drum regions have become unaligned with the other drum tracks. This isn't something I can simply nudge, because it has shifted the location of the audio data of all of the kickdrum regions back 5 or 6 seconds. Therefore, the proper start of the region is not even loaded. If you look at the screenshot below, there are two audio files, one drum overhead (0022 AIRE 2) and the kickdrum (0023 BOMBO). The regions 0022 AIRE 2.89, 107, 108, etc. should correspond in sample location with 0023 BOMBO.89, 107, 108, etc. But, as you can see, the BOMBO samples have been shifted leftwards, all of them. All of the other drum tracks have the correct alignment for each region. My question is: Is there a way I can copy the region mapping information between 0022 AIRE 2 and 0023 BOMBO? Or are there any other ways to tell 0023 BOMBO regions 89, 107, etc. to pull audio data from the same location as 0022 AIRE 89, 107, etc.? I really hope so, because if not I'm helpless. Thanks to anyone and all who might have some advice. JS

Jeez, now it has happened to my other tracks as well.. If someone could please help, I would be grateful. Put too much work into it to have this ruin everything.. Here is another picture, how can I get these samples to realign? Remember, they are supposed to be part of a group and thus aligned. For some reason, the samples for the track 040 BOMBO have been all shifted leftwards in time from where they take the sample from the audio track. How can I fix this? Thank you anyone who can help..

REGION MAP

Similar Messages

Maybe you are looking for