Region setting is fixed to "Spain - Spanish" after PC Migration

MBP has been in use for a couple of years with 1 user account (set as English). Have just migrated another user from a Spanish PC (Windows 7) which was running with Spanish region setting with English as its language.
Used the Migration Assistant and all is well other than the Region is locked out in System Preferences. I can change it to anything I want but it reverts to "Spain - Spanish" regardless of any changes I make. I have added other languages and so on so the system (menus etc.) is okay but some basic preferences (e.g. dates, currency) will not change even in "Custom" setting.
When you scroll through the Europe drop down for Regions there is a small dash next to Spain.
Any advice on this strange one?
Many thanks in advance

Open the DVD Player, choose Get Disc Info from the File menu, and click on Regions.
(32630)

Similar Messages

  • HT1461 Win 7 set up and running OK,but after go back from OSX the wireless net work stuck at identification cause the window working without Internet.Can we fix it or I must use Windows off line all the time? I already contact Microsoft 2 times for activa

    Win 7 set up and running OK,but after go back from OSX the wireless net work stuck at identification cause the window working without Internet.Can we fix it or I must use Windows off line all the time?
    I already contact Microsoft 2 times for activations.Hope I can fix from Apple instead.

    Ok....Got "Problem 2 and 4" solved....still trying to figure out this pop up everytime I click something...it's crazy how fast the pop up blinks...maybe once or 3 blinks then nothing till you close the window, then pop up then disappears...then click something
    else and pop up then gone....never seen this before...ive seen it when you tried to get online which turned out to be a virus on a customers cpu I worked on some years ago, I think it has something to do with the deleted files that I spoke of on last
    post...I notice it does it on start up as well.....think something is trying to install but not sure. Need to figure out where the appdata or start up folder and see whats in there....maybe it's in there.......so I might wait to see how it acts in the next
    couple days for "Problem 1"...but other than that it's running like a champ...so right now I just want to get the pop up windows to stop........thx again for everyone's help on this.
    John

  • Why after I updated my iPhone 4S to the new software it goes dim on its on? I have to hit the sleep button or go to setting to fix it.

    Why after I updated my iPhone 4S to the new software it goes dim on its on? I have to hit the sleep button or go to setting to fix it. This has to be a bug.

    Hello 6underwood,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iOS: Troubleshooting car stereo connections
    http://support.apple.com/kb/TS3581
    If you are experiencing difficulties with the connection between your stereo and device, disconnect the device, and then power cycle the stereo and your iPhone, iPod touch, or iPad. When the Home screen reappears, reconnect your device. If you cannot power cycle the stereo, turn the car off and then back on to allow the stereo to power off.
    Best of luck,
    Mario

  • Error during running crystal report when the region setting to Vietnamese

    I have a report called stock movement which stockmovement.rpt file. It has some formula field where the formula is
    onlastrecord;
    numbervar SysClosingQty;
    IF {usp_Rpt_Crystal_StockMovement;1.ReferenceNumber}="" OR IsNull({usp_Rpt_Crystal_StockMovement;1.ReferenceNumber}) THEN
    {usp_Rpt_Crystal_StockMovement;1.SystemOpeningBalanceQty}
    ELSE
    SysClosingQty:={usp_Rpt_Crystal_StockMovement;1.SystemBalanceQty};
    After deploy to client side which have the region setting to Vietnamese culture, the execution of  this report throwing the following and the balance client machine working fine.:
    The remaining text does not appear to be part of the formula.
    Details:errorKind
    Error in File StockMovement
    .rpt
    Error in formula SystemClosingQty;
    'onlastrecord;
    The remaining text does not appear to be part of the formula
    Details :errorKind
    If we change back to English culture, it is working perfectly.
    How to resolve this issue.
    Kindly help and me and thanks for the kind help
    Malini

    See if the content of [this|http://msdn.microsoft.com/en-us/library/ms227600(VS.80).aspx] will help.
    The other option is to install CR 2008 designer on that computer - temporarily as a test only. Run the report in the designer and see if it works. Sometimes the designer will give you different error or better clues as to what is going on. E.g.; this could even be a database issue. An eval of CR 2008 is available from [here|http://www.sap.com/solutions/sapbusinessobjects/sme/freetrials/index.epx]
    - Ludek
    Edited by: Ludek Uher on Oct 7, 2011 7:23 AM

  • Page item value set in app process not maintained after page submit

    Hi -- I have a sequence of events that goes like this:
    1) Page 0 region REG_1 is rendered before footer
    - Region REG_1 uses javascript / AJAX to call App process PROC_1
    - PROC_1 sets Page1 item PAGE1_MESSAGE to X
    - After PROC_1 executes successfully, REG_1 does doSubmit()
    2) Page 0 region REG_2 is rendered before footer; this happens
    after the page submit done by REG_1. (Conditions ensure that
    REG_1 is not rendered again)
    - Region REG_2 displays PAGE1_MESSAGE (=X) in an alert.
    - Region REG_2 uses javascript / AJAX to call App process PROC_2
    - PROC_2 sets Page1 item PAGE1_MESSAGE to Y
    - PROC_2 sets Application item DEBUG to PAGE1_MESSAGE (this is for debugging)
    - PROC_2 sets Application item APP_MESSAGE to Y (this is also for debugging)
    - After PROC_2 executes successfully, REG_2 does doSubmit()
    3) After REG_2 submits the page, here's what I have:
    - Application item APP_MESSAGE = Y. Good. This is what it was set to in PROC_2.
    - Page 1 item PAGE1_MESSAGE = X. Bad. This is what it was set to in PROC_1.
    - Application item DEBUG = Y. Good. This at least shows that PAGE1_MESSAGE was
    set to Y within PROC_2... but for some reason that value is not being preserved
    after the app process is done executing.
    - There are several other application items set in PROC_2, and they're all correct.
    Any ideas as to why this is happening? It seems like this should be
    pretty straightforward: set the value, submit the page, the value should be what
    I set it to.
    Thanks,
    Carol

    Hi -- Thanks for the suggestions. First and 3rd (default value, or being overwritten by process or computation) aren't happening. The source for PAGE1_MESSAGE having is Always, Using app item PAGE1_MESSAGE... but I don't see what else could work here. Not sure if that's the problem.
    I've put an example on apex.oracle.com. Workspace is dew_mir_tor. Username is [email protected]. Password is Mir97Dew77!Tor. Application is 22679, RefreshAllTest.
    To reiterate the description in my original posting, but using the real application item/region/process names:
    0) Press Button REFRESH_ALL on Page 1. This branches back to Page 1.
    1) Page 0 region Refresh_All is rendered before footer
    - Region sends up an alert to show you it's working
    - Region Refresh_All uses javascript / AJAX to call App process REFRESH_CZAR (You'll see a "wait" window flash up briefly while the app process is running)
    - REFRESH_CZAR sets Page1 item P1_MESSAGE_1 to X (The text here indicates where
    the value is being set and when it should be displayed)
    - After REFRESH_CZAR executes successfully, region Refresh_All does doSubmit()
    2) Page 0 region Refresh_Non_Czar is rendered before footer; this happens
    after the page submit done by Refresh_Czar. (Conditions ensure that
    Refresh_Czar is not rendered again)
    - Region sends up an alert to show you it's working
    - Region Refresh_Non_Czar displays P1_MESSAGE_1 in an alert.
    - Region Refresh_Non_Czar uses javascript / AJAX to call App process REFRESH_NON_CZAR (You'll see a "wait" window flash up briefly while the app process is running)
    - REFRESH_NON_CZAR sets Page1 item P1_MESSAGE_1 to Y (The text here indicates where
    the value is being set and when it should be displayed
    - REFRESH_NON_CZAR sets Application item TEST_VALUE2 to P1_MESSAGE_1 (this just shows that P1_MESSAGE_1 was indeed set to Y in this process...)
    - After process REFRESH_NON_CZAR executes successfully, region Refresh_Non_Czar does doSubmit()
    3) After Refresh_Non_Czar submits the page, Page 0 region Display_Messages is rendered.
    It sends up an alert so you can see it's working, and then it displays the value in P1_MESSAGE_1.
    The value is still the one that was set in REFRESH_CZAR, not the one set in REFRESH_NON_CZAR.
    Note that Display_Messages sets P1_MESSAGE_1 back to null, so you won't see it in session state after it's displayed in the alert. But you can see that TEST_VALUE2 is set to the message from REFRESH_NON_CZAR.
    Hope this helps solve the problem!
    Thanks,
    Carol

  • [svn:fx-trunk] 10898: Fix for a bug: After playing a hide effect, a window wouldn't be visible again.

    Revision: 10898
    Author:   [email protected]
    Date:     2009-10-06 13:54:04 -0700 (Tue, 06 Oct 2009)
    Log Message:
    Fix for a bug: After playing a hide effect, a window wouldn't be visible again.
    The issue here is that all effects that occur because of HIDE end up calling setVisible() (see EffectManager.effectEndHandler).  Window/WindowedApplication was basically left with two concepts of setVisible...the displayObject one and the native application one, and they were out of synch.  So setting visible=true on the window wasn?\226?\128?\153t calling setVisible(true) which controls the display object visibility.  Now instead of doing our work in the visible setter, we override setVisible() and do it in there.
    QE notes: -
    Doc notes: -
    Bugs: SDK-23263
    Reviewer: Darrell
    Tests run: checkintests, Rob ran mustella window/windowedapplication
    Is noteworthy for integration: No
    Ticket Links:
        http://bugs.adobe.com/jira/browse/SDK-23263
    Modified Paths:
        flex/sdk/trunk/frameworks/projects/airframework/src/mx/core/Window.as
        flex/sdk/trunk/frameworks/projects/airframework/src/mx/core/WindowedApplication.as
        flex/sdk/trunk/frameworks/projects/airframework/src/spark/components/Window.as
        flex/sdk/trunk/frameworks/projects/airframework/src/spark/components/WindowedApplication. as

    I run Suse 9.1 Linux, and Suse has a package called lmsensors which by default on my machine gives readings like this:
    Code: [Select]
    temp1:       +27°C  (high =    +0°C, hyst =   +22°C)   sensor = thermistor
    temp2:     +41.0°C  (high =   +80°C, hyst =   +75°C)   sensor = PII/Celeron diode 
    Now that 41C is pretty high for an idle AMD643000+ running at 1000Mhz, 1.08V. Too high, I would say. temp 1 in this case is the SYS temp, temp2 is the CPU temp.
    Now, using lmsensors I can duplicate your little trick and tell it that temp 2 is in fact a 3904 transistor. Having done this can I get readings like this:
    Code: [Select]
    temp1:       +27°C  (high =    +0°C, hyst =   +22°C)   sensor = thermistor
    temp2:     +16.0°C  (high =   +80°C, hyst =   +75°C)   sensor = 3904 transistor 
    Problem is, I'm not sure that the sensor is actually a 3904 transistor! The number's lower, but I was pretty sure that the sensor in the AMD64 is in fact a diode. Also, surely the CPU temp can't actually be that much lower than the SYS temp.
    So, I think your fix succeeds in giving lower temps and that's great in that it will tell your system software that the CPU is not overheating, but I don't think it's the solution to high temp reporting. Anyway, as you say, its a solution for people who can't run with system shutdowns due to bogus high temps.  
    I've been looking at these temp issues with the MSI K8T, and I was thinking the problem was simply a miscalibration. The Winbond sensor chip on my board (maybe the K8N is the same, maybe not) has a sensor temp offset that gets added to the temp coming from the sensor. On the K8T this number is +54C.   Funny number I know, but I've "fixed" the problem while I wait for a real bios fix on the K8T by simply reducing this offset to give me a CPU temp that matches SYS temp when idle. This enables cool'n'quiet fan control to work properly on my system, which is my main practical concern.

  • I delete my google contact by fixing the duplicate names, after that I could not add back my contact ? but calendar and e mail works

    I delete my google contact by fixing the duplicate names, after that I could not add back my contact ? but calendar and e mail works

    On my old I phone 3 at the setting it show "mail,contacts, calendars, reminders" but why I phone 4 only show "mail calendar, notes" is this why I can not get my contact back to my phone?

  • How to set a fixed width for a box

    Hi there,
    Struggling here.... must admit. 
    I need a solution whereby I can set a fixed width for a box that is grouping two buttons.  I suppose generally, I want to know how to set a fixed width for anything element.
    See the picture below.  I want the two buttons to stay the same distance apart, and I want the grouped buttons to stay the same distance from the right edge of the window, even as a user resizes the window.
    This is what happens when you reduce the size of the window .....
    I would like to stop this from happening.
    I can't figure out how accomplish keeping the parent div a fixed width, and a fixed position from the right side of the window, so the buttons won't overlap.
    Perhaps I'm doing the whole thing wrong. 
    I mean, is there a way to accomplish this without grouping the buttons?  That is, make the buttons fixed width, fixed distance apart from each other, and fixed distance from the right side of the window, even as the user resizes the page?
    I am trying to accomplish this using the Min/Max width settings, but given that there are so many different units to choose from, and the fact that when I place a button or box on the screen, it seems to be creating that button or box with a percentage-based width, I don't know how many pixels to set it to.... sigh....
    Many thanks in advance for your help.
    Sam

    Okay after much futzing I figured out at least part of the solution I need, but if someone knows of a more efficent way to do this please let me know. 
    I set a fixed minimum width in pixels for both of the buttons at 156px.
    I then made the left button float left and the right button float right.
    I then made the parent div for the buttons float right.
    That made the buttons stay the same size.
    The only thing I need to figure out how to do now is make the parent div stay a consistent distance in pixels from the right.  I tried setting a right margin but that didn't work.  As you size the window down, the div gets closer to the edge, until it passes it.  

  • Is there a fix for Bluetooth failing after 1-2 hours of play on my remote audio speakers? It sounds like "gargling". It occurs with all bluetooth speakers and quitting and restarting bluetooth is the only remedy I've found. Others?

    Is there a fix for Bluetooth failing after 1-2 hours of play on my remote audio speakers? It sounds like "gargling". It occurs with all bluetooth speakers and quitting and restarting bluetooth is the only remedy I've found. Others?

    8-doing a factory reset, then repeating steps 1 through 6
    Do you mean a restore to factory settings?. If so did you set up as new or restore from back up afterwards?

  • How do I fix Mountain Lion issue after login where Keychain Access attempts to open, hanging up with "application not responding" message?

    How do I fix Mountain Lion issue after login where Keychain Access attempts to open, hanging up with "application not responding" message?

    You could try booting into Safe Mode to see if that will help. And "Repair Permissions" in Disk Utility.
    Have you got Keychain set to open on Login or is it attempting to open on it's own.

  • How to change regional setting in group policy?

    Hi guys,
    I have some problem with updating regional setting via group policy.
    On the windows server 2008 r2.  
    User Configuration\Preferences\Control Panel Settings\Regional option.
    On the Regional option, I clicked add and i set the short date formal dd-MMM-yy. But after clicking apply and ok again if i right click the same regional setting , the short date used to change to M/d/yyyy again to the default. 
    Therefore please anyone who has the solution for this issue , please help me..

    Hi,
    >>But after clicking apply and ok again if i right click the same regional setting , the short date used to change to M/d/yyyy again to the default. 
    What's the color of the underline of the setting? If it's Red, to enable the setting configured, you need to press F6 to make the underline turn
    Green.
    Regarding this point, the following article can be referred to for more information.
    Enable and Disable Settings in a Preference Item
    http://technet.microsoft.com/en-us/library/cc754299.aspx
    Best regards,
    Frank Shen
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Regional Setting

    Hi
    After changing the "Regional Setting" and refreshing the BW query, BW is working different depending on the Computer Regional Setting.

    A boolean variable will have the value true or false. That value only becomes a string when there is a conversion from boolean to string. For example, the following VBScript code converts a boolean to a string:
    Dim bVBBoolDim strVBBoolbVBBool = truestrVBBool = CStr(bVBBool)
    or this Javsscript code which converts a boolean to a string:
    var bBool = new Boolean(1);var strBool = bBool.toString();
    In VBScript, the assumption is that you are converting the boolean to a string for the purpose of displaying the value to an end user. So it attempts to "display" the value in the most suitable way for the end user. In the localized French IE, VBScript will convert the booleanvalue true to the string"vrai".
    If you call a VBScript function passing a boolean value on the same page, then the boolean will never be converted to a string and there will be no problem. When you try to pass a boolean value back to the server through a form parameter, that value must be converted to a string since that is the only way to send the value over Http. The best solution is to realize that there could be conversion error and pass an integer instead of a boolean. You might also have a similar problem if you were passing a datetime value. A datetime value internally is just a number. But if you try to pass it as a form parameter, then it will be converted to a string (and formatted according to some locale). The best bet is to proactively format in a locale neutral fashion so that the server will always know how to interpret the datetime regardless of the version of IE or the locale of the user.

  • How can I set my phone to delete messages after a certain period of time? 6 months, 1 year??? It is taking up over 4GB on my phone.  I don't want to delete everything just the oldest ones.

    How can I set my phone to delete messages after a certain period of time? 6 months, 1 year??? It is taking up over 4GB on my phone.  I don't want to delete everything just the oldest ones.

    If you update to iOS 8, you can select that in Settings>Messages>Keep Message and then select your option. If you don't update to iOS 8, you'll need to do it manually.

  • Currency in report taken from regional setting and not infocube

    Dear All,
    I am facing very strange issue. I am using BEx analyzer 7.0
    I executed a report in Windows 2000, Excel 2003. The values are displayed correctly with currency which is in cube irrespective of the currency set in regional option in control panel.
    We are doing testing on windows vista and excel 2007 as we will upgrade to SAP GUI 7.10 and windows vista. I executed the report and the result values are matching but the currency is differant. The currency is taken from the regional settings in control panel. If I go to regional setting and change the currency, the report which is open in BEx analyzer changes the currency.
    We are facing this strange issue for only queries on 1 infocube. Other queries on another infocubes/multicubes are working fine.
    Has anyone faced the same issue. Please provide some pointers/solutions for above issue.
    Regards,
    Niraj

    Hi Shalu
    The Library 0FL has 4 currencies... i.e.
    HSL  - Local Currency  
    TSL   - Transaction Curre
    KSL  - Second Currency 
    OSL  - Third Currency  
    Go to GRR2 (Report form of your report), and double click on any column... You choose Key Figures in the Columns in a areport painter report... there you would have chosen any one of these currencies...
    Right click on the column and Copy it and paste it... Now change the Key Figure of the copied column to the one you desire...
    This should give you values in both currency...
    To identify which form you have used in GRR2 - Execute your report and go to Extras Menu > Technical Information.. In the pop up window that opens, double click on field "Report".
    Regards
    Ajay M

  • How do I set a fixed page size in Muse so that the window always stays the same size

    how do I set a fixed page size in Muse so that the window always stays the same size

    Hi Aish & thanks for responding;
    I would like the window size to stay the same for the entire site and not be
    able to scale to drag & scale it. ie 950 pixels x 500 pixels.
    Thanks,
    JB
    On 12/4/14 3:30 PM, "Aishvarya Raj Rastogi" <[email protected]>

Maybe you are looking for