Regional Structure Re-Check
Hello Everyone,
I had a look at the report RSADRRS01, which basically lists all addresses that have failed the regional structure check by looking at the ADRC-CHCKSTATUS field. If I got it right, the report RSADRRS01 does not do a comparision against the regional structure but only a lookup on the ADRC-CHCKSTATUS.
My question is that after extracting the list and maintaining the missing streets/cities/post codes in the regional structure, is there a report available to ADRC-CHCKSTATUS field by doing a fresh comparison against the regional structure.
Kind regards,
Gaurav
Hi Gaurav,
There are quarterly adjustment reports provided by SAP that can be used to check postal addresses with regional structure
1.RSADRQU1
2.RSADRQU2
3.RSADRQU3
You can find further details on these reports at the following link.
Quarterly Adjustment - Business Address Services (BC-SRV-ADR) - SAP Library
Similar Messages
-
Log file in RSADRLSM02 : regional structure
Hello,
can somebody tell me what is the structure od the "log. file name log" passed like a mandatory parameter to the program RSADRLSM02 that is filling the regional structure ?
Thank you,
Tom.Puneet
I have a question related to address validation / verification. We want to understand the extent of checks SAP offers by using RSADRLSM02.
We have been suggested by some to go with external software for address checks as opposed to using SAP regional structures.
We are looking for some feedback from customers who have used SAP regional structures before we proceed one way or the other.
Would you mind sharing your experience or point me to a contact ?
Thanks
Sudhakar -
Automatic import mass data regional structure - Program RSADRLSM01
Hello,
regarding the automatic import mass data to the regional structure via
program RSADRLSM02, we are working in order to replace our third party
provider.
That is why, we need to deleted all the data imported from the city
file and the references before to import new provider data.
We have checked the SAP procedure defined in SAP note 132948 and the
mentioned program RSADRLSM01 but we need confirm that the regional estructure informed in the old documents saved in the system could be impacted if the program RSADRLSM01 is executed.
Any experience in this kind of process?
Thanks in advance.
Juan CarlosSince no one has replied - why not just try this in your test system and see what happens?
-
Failure: Exchange regional Text from ECC to CRM (regional structure)
Hi all,
we exchange the Employee from ECC (HR) to CRM and we have very often failure because of the potal code text in CRM is different and therefore it will not be exchanged and stayes in the queue.
(The function module is called: HRALXSYNC - the job is called ZS_ZN_120_T:HRALXSYNC = is a copy of the original job ...)
A colleague told me there is a regional structure which must be set up identical in both systems. I do not no were I need to search for this settings for the correct postal code text - regional exchange ?
Do you have any ideas?
Best regards, AnnDear Denis,
thank you for your replay
The challenge is that we have a list of 100 employees which could not be assigend because the system check against the regional structure wich is activated by country and it seems not unique (HR -CRM). That means simply in SAP HR the name of the place called Schlieren bei Köniz and SAP CRM the Name of the place called Schlieren b. Köniz, therefore the record will not be exepted, this is the list of failure in CRM:
#5517#5Ort Schliern in country CH not exist
#5517#5Ort Rohr AG in country CH not exist
#5517#5Ort Muri b.Bern in country CH not exist
... so on ...
I have checked the entry in the table T005 -> SPRO: Set country-specific checks
and for country CH is field "City file active" set in both systems (HR and CRM)
- > but maybe, this is the problem? Do you have any ideas?
Regards, Ann -
Political Regional Structure in BI---Utilities (ISU)
Hi Experts,
Plssssss help me to understand how to load Political Regional Structure Hierarchy in BI. I checked the available datasources but cud not find relevent datasource for the same.
Thanks in advance
Amitthanks Srinivas ,
just by making a node in hierarchy as City and then create a element for it.
regrds
Deepak. -
Hello friends,
what is regional structures?where we use regional structures and where can we find regional structures?
what is the difference between structures and regional
structures?Please help me on this it's very urgent.....
Thanks in advance.
Regards,
Sunita.hi
check this link out.
http://help.sap.com/saphelp_nw04/helpdata/en/e0/597b52e88b11d4b35d0050dadef62b/frameset.htm
regards
vijay
reward points idf helpfull -
CCS ISU: Regional Structure - REGIONAL STRUC GROUP & TAX JURISDICATION CODE
Hi there
I am working for a Canadian utility company running CCS-ISU running version SAP ERP 6.04 with Enhancement Package 4 on NetWeaver 7.02. We are looking to update the POSTAL REGIONAL STRUCTURE and have some questions concerning the Regional Structure Group (REGIOGROUP) and Tax Jurisdiction (TAXJURCODE) fields.
We are planning on using data provided by Canada Post to update the Postal Regional Structure, unfortunately Canada Post cannot provide the information that is stored in the Tax Jurisdication Code and Regional Structure Group/District Code. The current data we have stored in these fields is outdated and sometimes missing. We would like to update the Postal Regional Structure without these two fields as it would greatly simplify the update and maintenance of the Postal Regional Structure.
Questions:
1. What are the downstream impacts to the CCS-ISU if we do not store the Tax Jurisdiction Code and Regional Structure Group in the Postal Regional Structure?
We know that 3rd party non energy accounts will default the TAXJURCODE and REGIOGROUP from the Regional Structure if the data is available. If it is not, then the data must be manually entered onto the account. For regular accounts, the system will use the TAXJURCODE and REGIOGROUP that flows through from the Service Address. Are there any other downstream processes that rely on the TAXJURCODE and REGIOGROUP being in the Regional Structure tables?
2. Will there be any impacts to Financials?
3. What data have other companies used to populate the Tax Jurisdiction and Regional Structure Group fields and how has this data been obtained?
Thanks kindly
Jeanette Lau
Edited by: Jeanette Lau on Aug 31, 2010 1:38 AM
Edited by: Jeanette Lau on Aug 31, 2010 1:41 AM1. What are the downstream impacts to the CCS-ISU if we do not store the Tax Jurisdiction Code and Regional Structure Group in the Postal Regional Structure?
If you store the data at postal regional structure....these are defaulted at the respective screens connection object,move in screens.
Here u can validate the adress at the time of move in.
if u dont maintain the data at postal regional strucutre.....if these are required fields then u need to enter manually. If tax jurisdiction code activated then u need to enter the TJC.
2. Will there be any impacts to Financials?
Tax Jurisdicton code has an affect if u hve region specific taxation.
3. What data have other companies used to populate the Tax Jurisdiction and Regional Structure Group fields and how has this data been obtained?
check the objects connection object,premise,movein screens, and FPE1 screens. -
Hi,
Does someone know if it is possible to transfer Regional Structure Groupings from R/3 to SRM ussing some kind of load? Or how to disable the check on this field in SRM?
Due to address management Regional Structure Groupings are being assigned to vendors in R/3, and when I make a BBPGETVD transfer, the vendors are not accepted due to "Regional Structure Group does not exists" in SRM.Hi Anders,
we are working with SAP SRM 6.0 and SAP R/3 4.6 and have the same problems.
We don't want to transfer any Regional Structure Groupings, and we don't know why is mandatory.
In another project (with SAP SRM 5.0 and R/3 4.7 we didn't have problems. Of course in the R/3 system in that case there aren't any Regional Structure).
I checked the Help, but I didn't find some help around that.
I mean nowhere I see that it's mandatory to have the check of the address if is not set the XREGS flag.
Do you know something more about this issue? Did you find more info?
Maybe it's mandatory to have Regional Structure Groupings in the SRM system if they are in the R/3 system, what do you think?
And more: somebody has some ideas for that?
Thank you,
Maria -
Validation in SAP Regional structure
Hi All,
I have a situation here.
If the Postal department of a country sends a record(address) which is either to be added or deleted in the SAP Regional structure,but my client(ISU company) wants somebody from his team to review or validate that address record before it is updated in the Regional structure.
This is because they think that they might be a year or so ahead from the Postal department in terms of addresses and might either have that record already present in the system or do not want to delete it as it might impact their assets on that address.
Could anyone tell me what all validations can be done corresponding to that record and what is the procedure for the same.We are only updating the Postal Codes,Streets and the Cities through the SAP standard report RSADRLSM02.
Remember that the person reviewing or validating the address will not have much knowledge of SAP,so he would expect some user friendly approach to do this.
Kindly suggest some feasible approach for the same.
Regards,
Puneet Jhari.Puneet
I have a question related to address validation / verification. We want to understand the extent of checks SAP offers by using RSADRLSM02.
We have been suggested by some to go with external software for address checks as opposed to using SAP regional structures.
We are looking for some feedback from customers who have used SAP regional structures before we proceed one way or the other.
Would you mind sharing your experience or point me to a contact ?
Thanks
Sudhakar -
How to create a hierarchy in Regional Structure and how to use it
Hi,
Please guide me how to create a Political Region Structure hierarchy and how to use it.
Thanks and RegardsHi,
Thanks for reply please.
I request you to please copy paste all the possible information here. It will be a great help.
I hope you understand why we can not provide our id on this forum.
Please guide.
Thanks and Regards
Edited by: MP Vashishth on May 18, 2009 7:14 AM -
How to create a Regional Structure and how to use it
Hi can anyone help me in creating the postal and political regional structures with T-CODES if u have any documents or screen shots
THANK YOU IN ADVANCE**Postal Code **
SR30 Create
SR31 Change
SR32 Display
**City **
SR10 Create
SR11 Change
SR12 Display
**Street **
SR20 Create
SR21 Change
SR22 Display
**Political **
ER30 Maintain Hierarchy
ER3D Display Hierarchy
ER31 Maintain Elements
ER32 Display Elements
Regards,
Siva Bontha
Edited by: Siva Bontha on Sep 4, 2009 12:38 PM -
Structural authorization check in HR-ABAP
Hello Friends,
I am not able to get how to do the structural authorization check, my exact problem was : There is a report where it diplays all the qualifications of the employees and now I should restrict to only the employees who belongs to the organization unit depending upon the user who is running the report belongs to. It should check some more authorization profiles also.
Regards,
Yoganand.Hi Yoganand,
if you use logical database PCH in your report, it should work by default.
Manually search for RHSTRUAUTH in transaction SE37. There
is a function modul which gives a list with the person the user has authorization.
With this list you could compare the list with selected persons.
hope this helps.
Regards
Bernd -
Need to deactivate structural auth. check for a custom Report
Hi all experts:
I have a report that is based on PNPCE logical database and it displays work hours for a project, all non-sensitive information. We would like a wide range of users to have access to this but since this is based on PNPCE logical database whenever a user runs it, the str. authorization check is performed. I have tried deactivate this check with P_ABAP object and coers 2 but it only ignores infotype auth. check but still checks the structural. We don't want to expand str. profile for users.
Do you know if there is a way to deactive this just for one report?
Your help will be greatly appreciated.
Regards,
NetThanks Kiran. I had tried that value but still got the same message. I am having problem understanding exactly when this value 2 ignores structural authorization because it works on some reports and not others. Anyway, we implemented BADI for this report to ignore structural auth. check and it is working fine.
Thanks again,
NT -
Hi friends,
I wanted to know how to upload the CRM regional structure with data?
Your suggestions / comments are welcome.
CliveRead in reference data
Copy postal reference data into the regional structure tables.
Use the program RSADRLSM02.
Read the program documentation.
See note 132948.
Fill regional structure with postal code, city, streets, ...
Title
Read in postal codes, cities, districts, streets, PO Boxes
Purpose
This program puts data in the regional structure, i.e. reads postal
codes, cities, districts, streets, PO Boxes and their objects from
external media into the R/3 System, independently of the format and
structure of the external data.
Prerequisites
This program processes files of a particular internal format. Such files
can be created from external source data with the LSM Workbench, using
various pre-defined transfer objects. The LSM Workbench is used as a
mapping tool which maps the data structures of various external media at
the interface of this program. This makes the program independent of the
format of the external data.
The LSM Workbench (Release 1.0 or higher) must be installed.
The procedure is described in note 132948.
Features
1. Data entry
The data to be processed is read directly from the application
server. The logical name of the data to be processed must be
specified. The file names are specified per object (city, street,
...), i.e. it must be made known, in which file the streets, in
which the cities, etc. are passed. If several or all objects are
passed in one file, the same logical file name must be specified
several times.
The Logical file name definition and the physical file name and path
assignment can be performed with the LSM Workbench.
2. Log/statistics
A log is created during processing. It is written to an application
server file together with statistics of objects read and created,
for further processing.
An existing logical file name must be specified.
The log file is line-oriented, i.e. it can be read record by record.
See also the ABAP command OPEN DATASET dsn IN TEXT MODE documentation.
3. Default creation language/country key
The default creation language and country for which the data are to
be created must be specified.
4. Storage restiction
To avoid a storage overflow, you can specify an approximate value in
kilobytes for how big an internal table in ABAP memory can become
without endangering the program.
The specified default value should only be changed if absolutely
necessary.
5. Internal and external number assignment
This program uses external number assignment, but in rare cases
certain objects cannot be created consistently with external
numbers. If the 'internal number assignment' flag is set, the object
indicated is created with another number, which is logged. Otherwise
such objects are not created.
6. Restart after program cancellation
If the program is cancelled, you can restart processing later where
it was cancelled. This position can either be automatically
determined or specified directly. The manually entered position is
not reprocessed, processing restarts with the next record.
Notes
o The program should run in the background with variants, because
reading the data can take a long time.
o The steps required for reading data into the regional structure are
described in detail in note 132948.
o It also describes how the data read in can be updated later.
Hope this helps
Julius -
How to create a tree structure with check boxs using Windows Activex Control?
Hi,
I am very new to LabVIEW. I am trying to create a tree structure with Check Boxes like the below. It would be great if someone would show me a right direction to go forward.
The aim is to select the item and one by one i have to get the Path and give as an input to by application VI.
Thanks and Best Regards
PrathapHi Andy,
Sorry i pasted the Picture.. Pls find the attached picture.
Following are my requirement:
1) I need to populate a tree given a root directory, listing all the Folders and file of cetain pattern(*.pjt... ther will be only one *.pjt in every subfolders).
2) I need a check box for every *.pjt to select the its path. The list of pjt files selected are used for my automation test suit.
Pls let me know if you need more info.
Best Regards
Prathap
Attachments:
tree.JPG 73 KB
Maybe you are looking for
-
I want to check the main diffrence in Pop up block enabled and disabled.But,i don't get any difference.Would u please help me to understand the difference using one practical example of website
-
Downloading free trial.
I think I am going to buy photoshop elements 8, But might be downloading the free trial of elements 9 first? My laptop does not have internet or virus protection. How likely is it that I could get a virus from going online JUST to download the tria
-
Talent Assessment form - what table is the data stored in?
Hi All, I am just wondering what SAP data table is used to store the data from the Talent Assessment form? Kind regards, Luke
-
How to keep last line together with table?
Hi guys, I am new to Reports , so please excuse me for probably primitive question. I am creating consolidated invoices report consisting of invoice date + 2 last lines of company signature like Yours, XXYYY Ltd. Depending on number of lines in invoi
-
L7 loadbalance content with special international language characters
Hi, I'm trying to do layer 7 loadbalancing with webpages that have links with special language characters in the url, our ACE drops these ie. åöä How to do? class-map type http loadbalance match-any FB0111661 2 match http url .* we running A1 code