Regional symbol problems using precalculation server ?
Hello,
BI server OS - AIX v6.1
BI - Netweaver v7.0
Precalc server OS - Windows 2003 SP2.
Precalc service - v7 patch 5
SAPGUI - v7.20 patch 8
Running precalculation server to generate excel report.
"SAP BW Precalculation Service Multi Instance" service logs on as prec1 windows user. Report generated this way contains wrong national symbols.
But if I log on interactively on precalculation host using prec1 and do report generation using BI analyzer - I get right regional symbols.
prec1 is windows local user and member of administrators group.
any ideas ?
thanks
VM
Edited by: Vilius Mockunas on Sep 19, 2011 9:48 AM
This is very similar problem:
[Precalculation server - precalculated workbooks without national characters;
We need Lithuanian language any ideas what value should I set ?
V
Similar Messages
-
Problems using smtp server in Mail
Hi, I'm using Mail on my iMac (Leopard) with a POP account for my incoming mail, and an smtp-server for the outgoing mails. Everything works fine.
Now I've also bought a new MacBook. I setup the Mail account exactly the same as on the iMac. I can recieve mails, but not send them? When I use Connection Doctor in Mail I get green markers for both incoming and outgoing servers. It says that the connection with the smtp server is fine. Still when I try to send mail it gets stuck in "Sending...", no error messages, nothing.
When I go back to the iMac, I can still send without problems.
Anyone have any solutions?
I can add that if I connect my 3G module for mobile internet to the MacBook and change the smtp server accordingly to that service provider, it sends mail without problems.
Message was edited by: drzetoUPDATE: I was able to set up the account using Eudora, and it worked fine. I guess it means that there's something funny happing with Mail.
-
Problem using Proxie server with Authentication & JEditorPane
Hello
I don't know if anyone has done this and if someone has I would really appreciate any help you could give me. I need to display a web page in a JEditorPane but the web page is accessed through a proxie server that uses authentication. I have tried using the setPage with username:[email protected] URL format for authentication but it doesn't work.
JEditorPane.setPage(new URL(urlStr))
this gives me an exception. The following is the exception message and printStackTrace
error:Server returned HTTP response code: 401 for URL: (Url I am trying to access)
at sun.net.www.protocol.http.HttpURLConnection.getInputStream(HttpURLConnection.java:709)
at java.net.HttpURLConnection.getResponseCode(HttpURLConnection.java:238)
at javax.swing.JEditorPane.getStream(JEditorPane.java:674)
at javax.swing.JEditorPane.setPage(JEditorPane.java:392)
at com.UrlChecker.panels.HTML.EditorPane._$2863(EditorPane.java:184)
at com.UrlChecker.panels.HTML.EditorPane.changeUrls(EditorPane.java:321)
Thank you for any help you can give me.Steve,
The URLs that I am using are internal. A similar type login page is the Oracle Metalink
http://metalink.oracle.com/metalink/plsql/ml2_gui.startup
I will try to find another webstie that you can test. Be back shortly
thanks -
Database connecting problem using iPlanet Server
hi experts,
i am new begi to iPlanet server.
before that i was using JWS2.0.
simple servlet is working fine in iPlanet.
when coming to database connectivity, there is error shown as
"SQLException java.sql.SQLException: [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified "
below is my servlet
import javax.servlet.*;
import javax.servlet.http.*;
import java.io.*;
import java.sql.*;
import java.util.*;
public class test1 extends HttpServlet
Connection dbCon;
Statement stat;
public void init(ServletConfig config) throws javax.servlet.ServletException
public void doGet (HttpServletRequest request,HttpServletResponse response) throws ServletException, IOException
ResultSet rs;
response.setContentType("text/html");
PrintWriter out = response.getWriter();
try
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
dbCon = DriverManager.getConnection("jdbc:odbc:collegeodbc","","");
stat = dbCon.createStatement();
rs = stat.executeQuery("select * from degrees");
rs.next();
out.println(rs.getString(1));
rs.close();
catch(ClassNotFoundException ce)
out.println("Class Not Found "+ce);
catch(SQLException se)
out.println("SQLException "+se);
public void destroy()
this same coding with void main() in system working fine.
still that servlet working fine with JWS2.0 also, but not in iPlanet.
any idea.
Plz help experts
thanks in adv.hi,
yes u can avoid restarting the server after compiling a servlet
just follow the following instruction
go to \Netscape\Server4\https-admserv\config\contexts.properties
and uncomment the following lines
context.global.reloadInterval=1
context.global.isModifiedCheckAggressive=true
and do the same step for the following properties file in
\Netscape\Server4\https-"ur machine name"\config\contexts.properties
and u can avoid restarting the server after u compile a servlet -
Problems using SQL Server 2014 upgrade advisor on a windows 2008 sp2 server
I got sql server 2014 upgrade advisor up and running on a windows 2012 vm and every thing works fine, but I am having trouble installing it locally for a SSRS Box. The SSRS box is running windows 2008 sp2 enterprise edition, but when I try
and run the SQLUA.msi install nothing happens.
anyone else experience this issue?
Hi jesse,
Welcome to the forum :-)
Can you please clarify your issue in more details. I did not understand what you are doing. What do you mean by "installing it locally for a SSRS Box". Do you mean that you are trying a simple installation which do not work, and raise an error?
If so then (1) we dont need the extra information about "why you need the SQL Server" :-) we just need to help you install it regardless the SSRS. (2) We do need the full error log and the error message that you get.
By the way, The SQLUA.msi is just a small utilities named "Upgrade Advisor"
http://msdn.microsoft.com/en-us/library/ms144256.aspx
Do you want to install the SQL Server itself?
What is your current SQL Server on the local windows 2008 server?
[Personal Site] [Blog] [Facebook] -
Configure precalculation server as unicode ?
Hello,
I have national symbol problem described here:
[Regional symbol problems using precalculation server ?;
We just compared correct report made interactively by live user and incorrect one made by precalculation service - looks like correct xls file chars are encoded by double byte, while incorrect one is encoded by single byte.
Other fact is that precalc server RFC connection test if "MDMP & Unicode" is set to Unicode, never works:
SM59->TCP/IP connections->PREC_OURPRECSERVER->MDMP & Unicode->Unicode
returns:
connection closed (no data)
While RFC conn test is OK if "MDMP & Unicode" is non unicode.
We concluded that our precalculation server runs as non unicode.
Very similar problem here:
[http://sap.ittoolbox.com/groups/technical-functional/sap-bw/precalculation-server-number-sign-at-the-workbooks-1844478]
Any ideas how to configure precalc as unicode ?
Any other ideas ?
Regards
Vilius MockunasHi,
Please check the note:
1000057 it should resolved your issue. As per the note: 1000057 you need to apply the patches to the .NET Connector 2.0.1 runtime DLLs contained in note 1413789.
Thanks,
Venkat -
Calendar Server 3.5: Problem using user's ID with uniuser -mod command
When there are two users who have the same Common Name (CN) in LDAP but
different User ID's (uid
field), I have a problem using the uid
field as an argument to
uniuser -mod in Netscape Calendar
Server (NCS) 3.5. For example, there may be two users, User1 and User2, who
both have the CN "John Smith."<BR>
<P>
<B>User1</B>
uid: jsmith2
sn: Smith
givenname: John
nscalxitemid: 10001:00314
<B>User2</B>
uid: jsmith
sn: Smith
givenname: John
nscalxitemid: 10001:00213
<P>
Let's say I want to change the value for nsCalOrgUnit2
for User1 to "jsmith." In NCS 4.0,
I can specify the uid as
an argument to uniuser -mod
. However, in NCS 3.5, if I specify the
uid as an argument to
uniuser -mod, the entry
for the user does not get changed.<BR>
<P>
<B>Calendar Server 4.0</B><BR>
<P>
%uniuser -mod "ID=00314" -m "OU2=jsmith/OU3=People" -n 10001
<BR>
uniuser: modified "Smith, John"<BR>
<P>
(The LDAP entry for User1 also reflects this change.)
<P>
<B>Calendar Server 3.5</B><BR>
<P>
%uniuser -mod "ID=00314" "OU2=jsmith/OU3=People" 10001
<BR>
uniuser: no need to modify "Smith,John"<BR>
<P>
(The LDAP entry for User1 does not reflect the change.)<BR>
<P>
%uniuser -mod "S=Smith/G=John/ID=00314" "OU2=jsmith/OU3=People"
10001<BR>
uniuser: no need to modify "Smith,John"<BR>
<P>
(The LDAP entry for User1 does not reflect the change.)<BR>
<P>
If I use the command uniuser -mod "S=Smith/G=John"
"OU2=jsmith/OU3=People" 10001
in NCS 3.5, the script will change the entry of the first "John Smith" in the
database and will cause the LDAP entry for this user to be updated as well.
However, the entry modified may or may not be the correct one. So, in
NCS 3.5, is there a way to specify a particular uid
to ensure that the correct LDAP entry
is modified?
<P>
To modify a user's information using the uid
field in Calendar Server 3.5, change
the user.ini file. The
following steps show how to change a user's information by modifying the
.ini file:<BR>
<P>
<OL>
<LI>Open the user.ini
file, which is in the path /users/unison/misc/user.ini
<P>
<LI>Add a section containing the desired changes. For example,<BR>
<P>
[Test]<BR>
OU2 = jsmith<BR>
OU3 = People<BR>
<P>
<LI>Run uniuser with
the following options:<BR>
<P>
% uniuser -mod "ID=00314" -s Test 10001
</OL>It turns out to be a problem with the user Keychain. It has some weird entry that was sending the wrong password. I delete all entries to the server and that corrected the problem
-
Hi,
This is similar - yet different - to a few of the old postings about performance
problems with using jdbc drivers against Sql Server 7 & 2000.
Here's the situation:
I am running a standalone java application on a Solaris box using BEA's jdbc driver
to connect to a Sql Server database on another network. The application retrieves
data from the database through joins on several tables for approximately 40,000
unique ids. It then processes all of this data and produces a file. We tuned
the app so that the execution time for a single run through the application was
24 minutes running against Sql Server 6.5 with BEA's jdbc driver. After performing
a DBMS conversion to upgrade it to Sql Server 2000 I switched the jDriver to the
Sql Server 2000 version. I ran the app and got an alarming execution time of
5hrs 32 min. After some research, I found the problem with unicode and nvarchar/varchar
and set the "useVarChars" property to "true" on the driver. The execution time
for a single run through the application is now 56 minutes.
56 minutes compared to 5 1/2 hrs is an amazing improvement. However, it is still
over twice the execution time that I was seeing against the 6.5 database. Theoretically,
I should be able to switch out my jdbc driver and the DBMS conversion should be
invisible to my application. That would also mean that I should be seeing the
same execution times with both versions of the DBMS. Has anybody else seen a
simlar situation? Are there any other settings or fixes that I can put into place
to get my performance back down to what I was seeing with 6.5? I would rather
not have to go through and perform another round of performance tuning after having
already done this when the app was originally built.
thanks,
mikeMike wrote:
Joe,
This was actually my next step. I replaced the BEA driver with
the MS driver and let it run through with out making any
configuration changes, just to see what happened. I got an
execution time of about 7 1/2 hrs (which was shocking). So,
(comparing apples to apples) while leaving the default unicode
property on, BEA ran faster than MS, 5 1/2 hrs to 7 1/2 hrs.
I then set the 'SendStringParametersAsUnicode' to 'false' on the
MS driver and ran another test. This time the application
executed in just over 24 minutes. The actual runtime was 24 min
16 sec, which is still ever so slightly above the actual runtime
against SS 6.5 which was 23 min 35 sec, but is twice as fast as the
56 minutes that BEA's driver was giving me.
I think that this is very interesting. I checked to make sure that
there were no outside factors that may have been influencing the
runtimes in either case, and there were none. Just to make sure,
I ran each driver again and got the same results. It sounds like
there are no known issues regarding this?
We have people looking into things on the DBMS side and I'm still
looking into things on my end, but so far none of us have found
anything. We'd like to continue using BEA's driver for the
support and the fact that we use Weblogic Server for all of our
online applications, but this new data might mean that I have to
switch drivers for this particular application.Thanks. No, there is no known issue, and if you put a packet sniffer
between the client and DBMS, you will probably not see any appreciable
difference in the content of the SQL sent be either driver. My suspicion is
that it involves the historical backward compatibility built in to the DBMS.
It must still handle several iterations of older applications, speaking obsolete
versions of the DBMS protocol, and expecting different DBMS behavior!
Our driver presents itself as a SQL7-level application, and may well be treated
differently than a newer one. This may include different query processing.
Because our driver is deprecated, it is unlikely that it will be changed in
future. We will certainly support you using the MS driver, and if you look
in the MS JDBC newsgroup, you'll see more answers from BEA folks than
from MS people!
Joe
>
>
Mike
The next test you should do, to isolate the issue, is to try another
JDBC driver.
MS provides a type-4 driver now, for free. If it is significantly faster,
it would be
interesting. However, it would still not isolate the problem, because
we still would
need to know what query plan is created by the DBMS, and why.
Joe Weinstein at BEA
PS: I can only tell you that our driver has not changed in it's semantic
function.
It essentially send SQL to the DBMS. It doesn't alter it. -
Problem while connecting to site using proxy server in weblogic 8.1
Hi All,
I am able to connect to the site www.testtest.com when i am running the below
program out side a bea weblogic server. but i couldn't able to connect to the
www.testtest.com when i am accessing thru a progam that was running in weblogic
server. i am getting the below exception
Tried all: '1' addresses, but could not connect over HTTP to server: 'www.testtest.com',
port: '80'
I am using weblogic server 8.1. Pls help me out in solving this.
import java.io.*;
public class testurl
public static void main(String[] args)
try
String username = "username";
String password = "password";
String proxy_internet_address = "111.111.12.12";
String proxy_internet_port = "80";
String urlString ="http://www.testtest.com/";
java.net.Authenticator.setDefault(new SimpleAuthenticator(username,password));
java.net.URL url = new java.net.URL(urlString);
java.util.Properties systemProperties = System.getProperties();
systemProperties.setProperty("http.proxyHost",proxy_internet_address);
systemProperties.setProperty("http.proxyPort",proxy_internet_port);
java.net.HttpURLConnection aConnection = (java.net.HttpURLConnection)(url.openConnection());
aConnection.setDoInput(true);
aConnection.setDoOutput(true);
aConnection.setUseCaches(false);
aConnection.connect();
java.io.InputStreamReader insr = new java.io.InputStreamReader(aConnection.getInputStream());
java.io.BufferedReader br = new java.io.BufferedReader(insr);
String s="";
String textString =null;
while((textString = br.readLine())!=null)
s = s + textString;
}//end of while
br.close();
aConnection.disconnect();
PrintWriter pw = new PrintWriter(new FileOutputStream("test.html"));
pw.println(s);
pw.close();
}catch(Exception e){
System.out.println(e.toString());I have a similar problem. I want to connect to a URL, but not using proxy. From outside BEA or in BEA 6.1 it works OK, but not in BEA 8.1.
Did you get to solve your problem ? -
Problem Using JSQL level 4 driver for SQL Server 2000
I am having problem , connecting to my Sql Server 2000 ( deployed on Windows 2000 Professional) using Microsoft JSQL level 4 Deriver .
I am doing it with following code,
Class.forName("com.microsoft.jdbc.sqlserver.SQLServerDriver");
Connection conn = DriverManager.getConnection
("jdbc:microsoft:sqlserver://192.168.0.232:1433;databaseName=DBNew;user=nakhter;Password=java;");
It gives me following Exception ,
java.sql.SQLException: [Microsoft][SQLServer 2000 Driver for JDBC][SQLServer]Login failed for user 'nakhter'. Reason: Not associated with a trusted SQL Server connection.
at com.microsoft.jdbc.base.BaseExceptions.createException Unknown Source)
at com.microsoft.jdbc.base.BaseExceptions.getException(Unknown Source)
at com.microsoft.jdbc.sqlserver.tds.TDSRequest.processErrorToken(Unknown Source)
at com.microsoft.jdbc.sqlserver.tds.TDSRequest.processReplyToken(Unknown Source)
at com.microsoft.jdbc.sqlserver.tds.TDSLoginRequest.processReplyToken(Unknown Source)
at com.microsoft.jdbc.sqlserver.tds.TDSRequest.processReply(Unknown Source)
at com.microsoft.jdbc.sqlserver.SQLServerImplConnection.open(Unknown Source)
at com.microsoft.jdbc.base.BaseConnection.getNewImplConnection(Unknown Source)
at com.microsoft.jdbc.base.BaseConnection.open(Unknown Source)
at com.microsoft.jdbc.base.BaseDriver.connect(Unknown Source)
at java.sql.DriverManager.getConnection(DriverManager.java:517)
at java.sql.DriverManager.getConnection(DriverManager.java:177)
I am usign my windows authentication usrname and password .
I has tried it with user "sa" but still same exception .
Could someone help me in this regard ?You need to switch SQL server to just use SQL Server authentication or both. The problem is that it is looking for a Windows NT account for nakhter with the password java. We get this all the time on new SQL Server installs if you just take the defaults.
-
Problem using Detail group region
Hi Guys,
I'm having problems using a detail group container. The problem is that when the detail group is placed in the detail region group, there is no button under that group to add a new row to the group. Is this a bug in JHS or have I done something wrong?
The reason I'm using the container is that I want selective rendering of detail groups depending on the state of an item in the parent group.
Regards
Bar
JDev: 10.1.3.2.0
JHS: 10.1.3.1.26Bar,
I could reproduce both problems. To fix the problem with the New button, you can change the content of the tableGroupButtons.vm template:
#if ($JHS.page.hasDetailPageComponents || $JHS.page.hasGroupRegionPageComponents)
<af:panelButtonBar id="${group.shortName}TableGroupButtons">
#JHS_PARSE("NEW_BUTTON_NOT_IN_FORM_LAYOUT" ${JHS.current.model})
</af:panelButtonBar>
#end
To fix the issue with the roles check, you can enter the rendered expression that is missing in the rendered property of the group region.
Steven Davelaar,
JHeadstart Team. -
I'm having a problem running, closing vi's using vi server..
Hi,
I'm having a problem. I have a vi called A. This is a user interface where the operator enters some parameters. When an OK button is pressed, I would like to call another vi, called B, using vi server and close this vi. Note that vi B does not display it's front panel. I do this in a sequence where I call vi B then on the next frame close vi A.
What happens is vi A closes but vi B never runs. I have a Open Vi Reference in vi B at the beginning to open a reference to itself to try to keep it into memory, but same problem. Now the funny part is if I run vi A with execution highlighted, vi B runs. What gives?
Thanks for any help!This is something i once heard about, it seems that if you have a reference opened to a vi, this will be running untill you close the reference AND the front panel, so in your case when you close the reference to B and it's front panel (never opened) you just act as if you were closing your vi's front panel, quiting it. In highlight execution, you can see your B vi's front panel, so you don't close it, as long as you give time until A and the reference to B are closed.
Hope this helps -
I have a problem using Pages. Whenever I type fl I get a symbol instead. Does anyone else have this problem?
Hi Tom
On my machine it seems that the fi ligature doesn't exist with Times New Roman (installed version is 5.01.3x)
It's available in Warnock Pro but the st one which is designed in Warnock doesn't apply.
This last screenshot was made from Linotype Explore, the old free version.
Typography isn't really easy, even with modern tools
Yvan KOENIG (VALLAURIS, France) lundi 6 juin 2011 14:53:01
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.7
Please : Search for questions similar to your own before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer ! -
Problems using Bex 3.x on Citrix Terminal Server Nw2004s
Hello,
we've got some problems using Bex 3.x on Ctirix Terminal Server.
1.) There are 3 Windows displayed (1)sapbex.xla
remote (2) Mappe 1
remote (3) Mappe
Why these Remote-Windonws are diplayed ? Do I have to set a path ?
2.) There occurs after a time when the Query should be changed ? No entry in SM21 ? An unexpected 'unable to show modal form within this context' error occured in wdbrlog"
Is there any connection time out-setting for the Bex ?
Thanks
FrankHi,
the problem resulted while implementing Citrix Hotfix XE104W2K3R02 and was fixed with XE104R02W2K3001.
Citrix Info:
Hotfix Rollup Pack XE104W2K3R02 - For Citrix MetaFrame XP 1.0 for Windows Server 2003
Known Issue(s) in this Release
After applying this hotfix rollup pack, seamless connections to Microsoft Office applications may display multiple icons on the client taskbar. To resolve this issue, apply Hotfix XE104R02W2K3001.
Hotfix XE104R02W2K3001 - For MetaFrame XP 1.0 for Windows Server 2003
Issue(s) Resolved in this Hotfix
1. After applying Hotfix Rollup Pack 2, seamless connections to Microsoft Office applications may display multiple icons on the client taskbar.
Kind regards
Frank -
Month Display problem in OBI using SQL server
Hi I am using SQL Server and in one of the reports that I am producing the month is displayed as
CAL_MONTH
APRIL
AUGUST
DECEMBER
FEBRUARY
JANUARY
JULY
JUNE
MARCH
MAY
NOVEMBER
OCTOBER
SEPTEMBER
instead of
CAL_MONTH
JANUARY
FEBRUARY
MARCh
I used the Evaluate function that I used in Cube (ESSBASE) where it worked OK.
I created a logical column "Sort Order" and used the following expression:
EVALUATE('Rank( %1.dimension.currentmember,%2.members)' AS INTEGER , "MIC"."MIC_DL"."dbo"."DM_DATE"."CAL_MONTH", "MIC"."MIC_DL"."dbo"."DM_DATE"."CAL_MONTH")
Then I set the the Sort Order column with the CAL_MONTH column.
But this is giving me the following error when retrieving thru presentation layer
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 16001] ODBC error state: 37000 code: 8180 message: [Microsoft][ODBC SQL Server Driver][SQL Server]Statement(s) could not be prepared.. [nQSError: 16001] ODBC error state: 37000 code: 1035 message: [Microsoft][ODBC SQL Server Driver][SQL Server]Incorrect syntax near 'Rank', expected 'OVER'.. [nQSError: 16002] Cannot obtain number of columns for the query result. (HY000)
SQL Issued: SELECT DM_DATE.CAL_MONTH saw_0 FROM MIC_DL ORDER BY saw_0
I used the expression Rankover in place of Rank but nothing fruitful.
Pls. guide.
Edited by: user10729112 on Aug 24, 2009 7:52 AMCould anyone guide on this pls....
I could create a duplicate column containing the vlaues 1,2 .....for the month and use "Case - When " expression but the table has already been built with Jan, Feb ......
Pls. help.
Maybe you are looking for
-
How do I restore my iTunes library from a backup?
Like an idiot I deleted my Itunes library after backing it up to an external HD. After doing this I deleted my original iTunes library and lo and behold I had no music. I thought I would be able to play them from the external HD but this wasn't the c
-
My dilemma: I have a desktop computer with Windows XP installed. Other household laptops use Windows vista and want to be able to print through my printer which is directly connected to my desktop using XP. How can I set my Vista laptops up to acce
-
Enhanced protected mode and global named shared memory object
Good morning. I've written a bho that do data exchange with a system service. The service creates named shared memory objects in the Global namespace. Outside appcontainer IE 11 sandboxed everything works fine lowering objects integrity level. Inside
-
the conection on my ipod has 3 bars and i am able to connect safari and seach on google but when i try youtube it says "cannot connect to youtube" every time, how can i fix this?
-
Hi SAP Gurus, We have a requirement to process Gross Payrun for our UK client and send the payroll outsourcing file to the 3rd party. Would like to know if it is possible to send the PY data as IDOC to the 3rd party for UK. Thanks Lakshmi