Regions no longer default to the "TrackNames" ??

Hi all,
Regions no longer default to the "TrackNames"....instead they get the "Instrument Names".........with VSL these are super-long confusing names.....how do I change it back to the behaviour in 7.1.0?
SvK
driving me batty.......

hey SVK
just go to Region>and tick track names to region
and you can also choose to have the instruments colors to region as well
this is all in the manual ( sorry to say that )
stash

Similar Messages

  • Acrobat XI save as is no longer defaulting to the previous files location

    As the title says Acrobat XI used to default to the location of the last file I saved when using 'save as'. This was extremely useful as I deal with multiple email attachments that go to similar directories that can be easily changed in the address bar in 'save as'. However after running an update for Acrobat this no longer happens and 'save as' defaults to Outlook's temporary internet files folder. Does anyone know how to undo this?

    Hi Fyfe_H,
    I was unable to replicate the issue with Outlook 2013 and Acrobat 11.0.09 on Windows 7-64 Bit.
    Please let me know the environment details for further analysis.
    Regards,
    Rave

  • Why does the Canadian regional date format default to the US date format?

    I've discovered that on the iPad, iPhone and MacBook that choosing the Canadian Regional format results in the US date format of mm/dd/yyyy rather than the Canadian format of dd/mm/yyyy. I can use a custom format on the MacBook (but why do I need to??) but can't see how to change under settings on my iPad and iPhone.
    -Bob.

    In iOS8 anyone can now select the "Canadian English" regional setting and you will get dates in correct ISO 8601 YYYY-MM-DD format.  To confirm this is what you should use, check your Ontario Drivers License, OHIP health card or the bottom date on any federal gc.ca  webpage.  Yosemite is also the same. Thanks Apple, for having listened to Canada!
    (You might want to change Siri back to the American female voice from the British-sounding male voice.)

  • The back button no longer works. I have disabled all add-ons, rebooted & reset the defaults for the browser and nothing has changed. This happens on all webpages.How do I get the back button to light up again?

    the back button no longer works. I have disabled all add-ons,rebooted & reset the defaults for the browser and nothing has changed. This happens on all webpages.How do I get the back button to light up again?

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
    *Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
    * Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
    Another possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
    *http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
    *https://support.mozilla.com/kb/Bookmarks+not+saved#w_places-database-file

  • HT4897 I created an alias precisely because I wanted to make it the new default name and then quickly realized it wasn't possible. How long after deleting the alias will it become available again so that I can create a new account with it?

    I created an alias precisely because I wanted to make it the new default name and then quickly realized it wasn't possible. How long after deleting the alias will it become available again so that I can create a new account with it?
    I'm trying to make iCloud mail my primary email but I'm concerned that I may have lost the perfect email address forever.

    I have the same problem. After our wedding I've created an alias ([email protected]) to my actual AppleID Account ([email protected]). Now I'd the idea to delete the alias and my actual AppleID to create a new AppleID with ([email protected]).
    Is there really no possibilty to do this?
    Thanks in advance for quick and positive feedback.

  • Why when I set up my Country or Region on my iPhone 5, the default language of the phone is the country's and not the one I selected when I set up my preferred language?

    Why when I set up my Country or Region on my iPhone 5, the default language of the phone is the country's and not the one I selected when I set up my preferred language?

    Go to Settings/General/Reset and choose Reset All Content and Settings. This will erase everything on the iPhone and allow you to set it up again as new with the proper Apple ID.

  • Config sync:error: Folder is no longer part of the system data source or the folder not found

    This is the message I am getting when i try to configure synchronization through intellisync in all functions.  Any ideas?
    Folder is no longer part of the system data source or the folder not found
    JT

    jtwilcox wrote:
    Mail account is MAPI
    XP
    Outlook 2007
    thanks for your help so far!
    JT
    Hi...
    Based upon the folder error, my guess is the Desktop Manager is having difficulty determining your default mail client. I am not sure why but it is easy enough to redo a profile in Outlook just to test this. (Control Panel / Mail)
    Of course, I would backup my PST file prior to doing this and then create a new profile and import the PST file into the new profile. Once the profile is running and tested ok, I would again go to the Control Panel / Mail and set the default profile to point to the newly created profile. Then run the Desktop Manager and see what happens....
    H.
    +++++++++++++++++++++++++++++++++++++++++++++++++
    If successful in helping you, please give me kudos in my post.
    Please mark the post that solved it for you!
    Thank you!
    Best Regards
    hmeister

  • WRT54G ver. 6 can no longer connect to the internet after reset

    I reset my WRT54G ver. 6 to clear the password, and now I can no longer connect to the internet with it. I can see the router itself from my PC, but that is all. I've followed the directions here for connection problems, but I can't seem to get an IP Address for it in the Web Configuration tool. Anybody have any thoughts?

    Since you reset your router, you need to reconfigure it back again. try the online utility that automates the configuration. download Easy Link Connect utility at www.linksys.com/connect then download "Netset" and follow instructions.
    if not Easy Link connect didnt work then you need to do the configuration manually.
    1. check physical connection modem should be connected wired to internet port of the router then PC to numbered ports of the router.
    2. Brighthouse i believe is cable connection, right? try power cycle your devices (turn off modem and router then turn on modem 1st then router next). check if your online.
    3. if not. check PC ip. click "start" then "run" type in "cmd" then press "OK". the command prompt should pop-up. type "ipconfig" and check IP and gateway. you should be getting an ip: 192.168.1.x and gateway: 192.168.1.1
    4. access router. open IE, then type in http://192.168.1.1 on address bar.
    5. you will be prompted with username and PW. "admin" is the default password. on setup, just below are subtabs. select "MAC address clone". in it, set "mac clone" to "enable" then click on "clone" then "save settings".
    6. power cycle devices again. try to go online
    note: if you dont have latest firmware. try updating if needed
    Message Edited by whodas on 11-07-200601:28 PM
    it is EVIL enough for GOOD men do NOTHING.

  • IMac Can No Longer Connect to the Internet

    My parents use a 2006 Intel Core Duo iMac (the 17", 1.83GHz model) running OS 10.6 (Snow Leopard). They typically connect to the internet using a wireless network set up using an Airport Extreme with RCN as their ISP.
    As of yesterday, the computer can no longer connect to the internet, while all other computers in the house, both Mac and PC, still can. I've tried power cycling the modem and the router, connecting using ethernet, and connecting the computer directly into the modem. Thus far, none of these attempts have succeeded. I've taken a look at the network settings for the computer and while networking is most certainly my thing I wasn't able to detect a change. As a last ditch attempt I tried using Google's public DNS service, rather than RCN's default, but that made no difference, so I've reverted it.
    I realize that the information available in this thread is almost certainly too little to guess at what the problem might be, but I'm more than happy to fetch information that might be helpful in finding a solution.
    Thanks for taking the time to read the problem; hopefully there's an obvious solution.

    JJ247 wrote:  I typically say a restore would correct any software issues but your drive is dead.
    "Drive is dead????" what in this thread gives you that idea? What card might be failing?
    Agent: do you have any Input Managers (might be called Input Methods) either in the Home Folder/Library or in the HD/Library (not /System/Library.)
    Yes, do try another Account and test for this there.
    I know you've already tried Google DNS, but try OpenDNS
    You don't need to go to the OpenDNS site to use OpenDNS. Simply open Network>Advanced>DNS in Sys Prefs and enter the following numbers for the interface you use, e.g. Airport or Ethernet,
    208.67.222.222
    208.67.220.220
    Hit OK and then Apply. Make sure those numbers are entered above any others you may have there.
    To check to see if it's working
    http://www.opendns.com/welcome/

  • I have updated to Mozilla 16.0.1 and yahoo toolbar 2.4.8.20120412011105. Search assist now no longer works on the toolbar. Enter key also will not work on toolb

    I have updated to Mozilla 16.0.1 and yahoo toolbar 2.4.8.20120412011105. Search assist now no longer works on the toolbar, nor does the enter key. I've reinstalled both Mozilla and the yahoo toolbar. I've followed the instructions given in the customize toolbar section, but I am thinking that perhaps this toolbar just doesn't work with Mozilla?

    '''Try the Firefox Safe Mode''' to see how it works there. The Safe Mode is a troubleshooting mode, which disables most add-ons.''
    ''(If you're not using it, switch to the Default theme.)''
    * You can open the Firefox 4.0+ Safe Mode by holding the '''Shift''' key when you use the Firefox desktop or Start menu shortcut.
    * Or use the Help menu item and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
    ''Don't select anything right now, just use "'Start in Safe Mode"''
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shift key) to open it again.''
    '''''If it is good in the Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one.
    Please follow the [[Troubleshooting extensions and themes]] article for that.
    ''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''

  • When i double click on Mac HD the view has changed and my user name is no longer listed on the left. How can I reset this

    When i double click on Mac HD the view has changed and my user name is no longer listed on the left. How can I reset this?

    Do a factory reset .. nothing will be deleted from your backups and you will be able to get access to them again.
    The Factory Reset Gen1-4.
    Unplug your TC. Hold in reset. and power the TC back on.. without releasing reset for about 10sec. When the status light flashes rapidly; release it.
    Be Gentle! Feel the switch click on. It has a positive feel..  add no more pressure after that.
    TC will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
    No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.

  • Job output is no longer available in the database control file

    Im running my rman backup with Oracle Enterprise manager grid control 10.2.0.1.
    In nocatalog mode.
    When I look for the job output in the "View Backup Report" section, it says
    Job output is no longer available in the database control file.
    Here is my rman setup:
    RMAN> show all;
    using target database control file instead of recovery catalog
    RMAN configuration parameters are:
    CONFIGURE RETENTION POLICY TO REDUNDANCY 7;
    CONFIGURE BACKUP OPTIMIZATION OFF; # default
    CONFIGURE DEFAULT DEVICE TYPE TO DISK; # default
    CONFIGURE CONTROLFILE AUTOBACKUP ON;
    CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '%F'; # default
    CONFIGURE DEVICE TYPE DISK BACKUP TYPE TO COMPRESSED BACKUPSET PARALLELISM 2;
    CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
    CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
    CONFIGURE CHANNEL DEVICE TYPE DISK MAXPIECESIZE 5 G;
    CONFIGURE MAXSETSIZE TO UNLIMITED; # default
    CONFIGURE ENCRYPTION FOR DATABASE OFF; # default
    CONFIGURE ENCRYPTION ALGORITHM 'AES128'; # default
    CONFIGURE ARCHIVELOG DELETION POLICY TO NONE; # default
    CONFIGURE SNAPSHOT CONTROLFILE NAME TO '/opt/oracle/app/oracle/product/10.2.0/db_1/dbs/snapcf_mus_prod.f'; # default
    anyone knows why i cannot see my rman job output?

    show parameter control_file_record_keep_time;
    NAME TYPE VALUE
    control_file_record_keep_time integer 7
    The backup is usually the last one. And it's the day before.
    If i go to the JOB tab in oem, then click on the job detail, i can see the detail of my rman backup. But i cannot see the backup detail in the View Backup Report section off the database. It says the error message : Job output is no longer available in the database control file

  • C855-S5190 restored via recovery to factory defaults, ran the Toshiba updater, no Windows Update

    I'm desperately searching for help!  My elderly father has a C855-S5190 and after trying the update to Windows 8.1 from the store, the laptop doesn't boot all the way up - kept giving various errors.  So, he dropped if off for me to try to fix.  I couldn't get around it so I did the restore to factory defaults from the restore disks.
    After that all finished, I tried the Toshiba service station and it gave me about 7 updates that I installed.  After that, I rebooted and then wanted to see about doing the Windows 8.1 update.  Went to Windows Store - it says I need to do Windows Updates.  I went to search, and now there's no Windows Update showing anywhere.  I checked settings, and everything is empty under there as well.  What happened??
    If someone could tell me how I can possibly do the Windows Updates.  I tried this once before trying the service center, the updates either fail, or they install, then it reboots, can't configure them, and gets stuck in a loop of trying to roll things back.  That caused me to have to do another restore to factory defaults - I've had to do it 4 times so far, and I just don't want to get stuck in that loop again.  So, I need to know what happened to my Windows Update, how do I get it back, and how the heck do I get this thing updated to 8.1?
    I booted a Linux live media before starting and was able to recover the files, etc., he had on it to a USB flash drive since I knew doing the restore would wipe that all out.
    Any and all input is GREATLE appreciated!!
    Dave

    Here's the link to the Microsoft page,  I had to do this to get Windows Update to run.  The Windows 8.1 upgrade would not let me do the upgrade until Windows Update was run, and I kept getting this error.  It takes a *long* time for this to straighten out if you've done a factory defaults restore - several reboots, etc..
    http://support.microsoft.com/kb/949358

  • Iv just introduced midi into my studio im running logic9 and have brought Midiman Aniversary 4in 4 out to my set up midi is running well but i cannot seem to mute or solo midi regions an isolate them from the audio can someone please help me Murray.

    Iv just introduced midi into my studio im running logic9 and have brought Midiman Aniversary 4in 4 out to my set up midi is running well but i cannot seem to mute or solo midi regions an isolate them from the audio can someone please help me Murray.

    Hi Charlotte,
    You don't say what your version of Windows you have. Assuming XP, go to Start | Run, type DXDIAG and click OK. Click the Sound tab and run the tests to eliminate a hardware problem first of all. If you don't hear anything, check your cables first of all. Also make sure "Mute" isn't checkmarked in your sound setup. You'll find that in Windows Control Panel.
    Which browser do you use? If you have Firefox 4, sign up to the HTML5 trial @ http://www.youtube.com/html5
    HTML5 is the latest video standard and doesn't require Flash player. Google is in the process of converting all its files to work with the new format. It may solve you problem. If you don't have Firefox 4, you can get it from here: http://www.mozilla.com/en-US/firefox/fx/
    IE8 doesn't support HTML5.
    To clean out your temp files, go to Start | Run, type: CLEANMGR and click OK. Click OK again to start the utility. Tick all the boxes except "Compress old files" because the latter takes too long, and then click OK. You can run this utility any time you wish by the way.
    The above steps will hopefully fix your problem. If not, post here again please.

  • This browser no longer exists at the location specified in the preview in browser preferences

    I am creating a new website using Adobe Dreamweaver CC 2014. I tried to preview it in Chrome and I received an error message saying, "This browser no longer exists at the location specified in the Preview in Browser preferences." It previews fine in IE. I use Chrome as my default, but I personally have not gone in and reset anything so I don't understand why this is happening since I created my last Dreamweaver site. Any ideas how I can fix this?
    Jennifer

    Okay, thank you. Inside Dreamweaver, I selected Edit Browser List and then it opened to show Chrome F12 and Internet Explorer. I chose Chrome F12 and I got the following responses in the screenshots below. I don't know what to do about the final image error message.

Maybe you are looking for