Register a MOSS system to SLD

Hello Experts,
I'd like to know if there is some way I could register a MOSS system (defined as far as I know as a 3rd party system) as a technical system into the SLD?
As for now, any ABAP or J2EE system is registered automatically to the SLD during installation. What is the case regarding a MOSS system? can it be defined as a Data_Supplier to a SLD_Client?
Thanks,
Tomer

Maybe you can use sldreg?
Install saposcol and sldreg on windows machine. Use saposcol to generate Hardware Information XML and then use sldreg to send this information to SLD.
http://help.sap.com/saphelp_nw70/helpdata/en/42/efba5e93d51bc9e10000000a11466f/content.htm

Similar Messages

Register MOSS system in SLD

Hello Experts,
I'd like to know if there is some way I could register a MOSS system (defined as far as I know as a 3rd party system) as a technical system into the SLD?
As for now, any ABAP or J2EE system is registered automatically to the SLD during installation. What is the case regarding a MOSS system? can it be defined as a Data_Supplier to a SLD_Client?
Thanks,
Tomer

Hello Tomer,
Its possible.
Please check https://websmp101.sap-ag.de/~sapidb/011000358700000315592008E
Regards,
Abhay

Register MOSS system to SLD

Hello Experts,
I'd like to know if there is some way I could register a MOSS system (defined as far as I know as a 3rd party system) as a technical system into the SLD?
As for now, any ABAP or J2EE system is registered automatically to the SLD during installation. What is the case regarding a MOSS system? can it be defined as a Data_Supplier to a SLD_Client?
Thanks,
Tomer

Maybe you can use sldreg?
Install saposcol and sldreg on windows machine. Use saposcol to generate Hardware Information XML and then use sldreg to send this information to SLD.
http://help.sap.com/saphelp_nw70/helpdata/en/42/efba5e93d51bc9e10000000a11466f/content.htm

Tech System in SLD and RZ70 in 4.6c and 4.7 systems

Hi,
We have two legacy systems R3 4.6C and R3 4.7 Systems in our landscape and we are using PI 7.1.
we are setting up configurations for IDOC communications
1) between 4.7 and PI
2) between 4.6C and PI
for registering 4.7 system in SLD, we used RZ70 transaction in 4.7, and the tech system (of type AS ABAP) got created in SLD, so we could proceed with creation of Business system for one of its abap client.
but when we tried the same thing in 4.6c system, when we tried executing RZ70 in 4.6C system, it says "Transaction RZ70 does not exist". Since 4.6C does not support rz70, how can we register the corresponding Tech System in PI SLD.
Thanks in advance.

Hi
The ABAP-based SLD data supplier (transaction RZ70) is available for all SAP systems as of SAP Basis release 4.0B.
For details see here: http://help.sap.com/saphelp_nwpi71/helpdata/EN/11/0dfe55e0c8fc4e910706a47ca6859b/content.htm
Are you sure you typed in transaction code correctly?
If everything does not help open a CSN at SMP and in the meantime - as a workaround - you can maintain the SLD manually for that system.
Regards,
Volker

How register the ECC Client to SLD automatically

Hi All,
I know the we could use RZ70 to register the ABAP system to SLD
but it seems RZ70 only could register it as the technical system in SLD
but i am wondering is it possible to register the client as the business system in SLD?
let's say: ECC host is erp, and the client is 100, how to register ERPCLNT100 into SLD automatically???
thanks a lot

Hi,
From PI7.0 onwards ECC client registered automatically in SLD.
Check more on PI installation guidelines.
Re: Installing PI 7.0
Thanks.
Boopathi
Edited by: Boopathi Thangavel on Jun 30, 2008 8:55 AM

Register system to SLD with fully qualified name

Anybody know how to register the host name for an abap system to the SLD so it uses the fully qualified DNS name? According to the help files in the SLD, it say's: "By default, host names in SLD are written lower case without any network domain"
Our SAP servers are in:
ex.) abc.domain.com
Our desktops are in:
ex.) def.domain.com
So, when developers try to register their local NWDS to the SLD, they cannot reach it. The only solution is for them to add the SAP Server domain (dx.domain.com) into their local tcp/ip settings on their desktop.
Does anybody else have this same issue? Any suggestions on how we can use a FQ DNS name for SLD registration?
-Dave

Sorry for the confusion. I think I may have mis-worded my own question. It was a Friday!
Want I meant to say was, our developers' local JCo connections fail when they try to make a connection to an SAP system listed in the SLD. This is because the two machines (pc and SAP server) reside in different domains.
SAP Servers are in abc.domain.com
Desktop computers are in def.domain.com
The only way for the JCo connection to work from their desktop, is if the developer adds "abc.domain.com" into the tcp/ip settings on their desktop.
If we could register the SAP system in the SLD as a Fully Qualified Name, I think the problem would disappear.

Registering a new technical system in SLD - ABAP based

Hi friends,
For ,Registering a new technical system in SLD - ABAP based
I followed the following steps...
At first
- went to the SDL - http://server:port/sld
- went to the "Administaton" tab
- went to the "Data Supplier Bridge"
In RFC Gateway
Server :
Service :
What I to give Here...
is it the R/3 System Server and Service
Please suggest regarding it...
With Regards,
Sunil

Hi Michal,
Thanks for the Blog. It was really enlightening to find out how the Technical systems are registered. But my problem is not solved yet.:(
I have newly installed a CRM 2007 system, and tried to see the Technical systems AS ABAP and AS JAVA which should be automatically created. But no AS ABAP system was created. So i tried doing it using your Blog.
In the Admin tab of SLD, i did not find any "Data Suppliers Bridge", but there was a "Data Suppliers" tab. On clicking it, i verified that sld/active was TRUE, and then updated the data in RZ70 and clicked on Activate button. The activation was successfully done, but no new AS ABAP Technical system appeared.
Is there any more configs left to be done? Please help me out with this issue. Thanks in Advance.
Regards,
Savan D.

Registering ABAP system with SLD Web AS JAVA

Hello,
I'm trying to register an ABAP only system with an SLD that resides on a JAVA-only system. When registering the ABAP system in RZ70, I enter the gateway host of the JAVA-only system and the gateway service as "sapgw<instance>". However, when looking at the java-only system, I don't see that the gateway is even running.
The JAVA only system is running on Windows 2008.
A couple questions:
1) Is "sapgw<instance>" the gateway service on a java-only system?
2) If the gateway is running, does it show in the services or in the SAP MMC?
3) I've tried starting the gateway manually using "gwrd -force pf=<start profile>" and the dev_rd log says"***LOG S00=> GwInitReader, gateway started ( 2980) [gwxxrd.c     1757]
ERROR => [CreateOsShm] CreateFileMapping(5,4 KB) failed with Err=5
              EIO*: Input/output error OR: Access is denied. [shmnt.c      2174]
ERROR => ShmCreate: Create (5,4096,1) failed [shmnt.c      506]
Is this the right way to start the gateway?
Any help would be greatly appreciated.
Thanks,
Dale Dingmann

Hi Dale,
could you please tell us which Release your AS Java is? I have an AS Java 7.01(UsageType EP) on an AIX machine with a local SLD to which an AS ABAP 7.01 should register. I am not sure whether I can use the solution mentioned above or whether I have to install a standalone gateway.
System Landscape Directory Planning Guide (March 2010, page 43) quotes quite a similar solution but without Information concerning the release. This information also belongs to a standalone SLD. The last three scentences of SAP Note 1057720 quotes that for releases up to and including Release 7.0 one has to install a standalone gateway. In higher releases however "the SCS of the AS Java installs an RFC gateway and configures it as the default in the SLD". Is AS Java 7.01 a higher release than 7.00 and how can I check wheter there is an installed Gateway on SCS instance or not?
Can someone clarify that point?
Best Regards

Hi business system in sld deleted

hi
one of the business systems(regarding SXI technical system web as abap) is deleted getting as error as integration server already defined when trying to
recreate

hi,
delete both of them
remember to recreate as shown in my blog:
/people/michal.krawczyk2/blog/2005/03/10/registering-a-new-technical-system-in-sld--abap-based
Rz70 will save your time
Regards,
michal

Third Party System In SLD??

Hi Friends...
i need to use third party systems in my scenarios..
for third party Business systems and Technical systems ..is this mandatory to provide Logical systems and host names in SLD.
regards
Ram

Hi,
I hope no..But..
Unlike SAP products, third-party products are not necessarily included in the SLD component description. Therefore, you must first register the third-party product before you can register an installed system of this third-party product in the SLD.
See below link..
http://help.sap.com/saphelp_nw04/helpdata/en/24/8fa93e08503614e10000000a114084/content.htm
Regards
Chilla..

[SLD] Autoregistration of ABAP System in SLD

Hi,
want to registrate an ABAP system in SLD.
RZ70 create errors, because RFC destination is missing.
Trying to create a destination type T to the SLD sytstem. I'm
using same parameter as define in another system that is
also connect to SLD, but he doesn't recognize the gateway service.
Without gateway information he says that the programm is not
registered yet.
Where to register the programm? In ABAP system or XI?
thanks

Hi,
you can find the solution here.........
XI Software Logistics Solution III: CMS
XI Software Logistics Solution III: CMS
XI Software Logistics II: Overview
XI Software Logistics II: Overview
XI Software Logistics 1: SLD Preparation
XI Software Logistics 1: SLD Preparation
SLD: General recommendation how to set up the system landscape directory
SLD: General recommendation how to set up the system landscape directory
TechEd '07: LCM228 - SAP NetWeaver System Landscapes
TechEd '07: LCM228 - SAP NetWeaver System Landscapes
TechEd '07: LCM112 - System Landscape Directory of SAP NetWeaver: Concepts and Best Practices
TechEd '07: LCM112 - System Landscape Directory of SAP NetWeaver: Concepts and Best Practices
Sizing a System for the System Landscape Directory of SAP NetWeaver
Sizing a System for the System Landscape Directory of SAP NetWeaver
An overview of the documentation required to set up the system landscape directory (SLD) of SAP NetWeaver
An overview of the documentation required to set up the system landscape directory (SLD) of SAP NetWeaver
Planning a Strategy for the System Landscape Directory (SLD) of SAP NetWeaver
Planning a Strategy for the System Landscape Directory (SLD) of SAP NetWeaver
ULM206: Landscape Strategies for the System Landscape Directory of SAP NetWeaver
ULM206: Landscape Strategies for the System Landscape Directory of SAP NetWeaver
Thanks,
Madhu

SID Problem : could not register two ABAP systems with same SID

Dear Expert:
We have to register two ABAP systems on different host to SLD, and these two systems have same SID.
We use rz70 to do this, but we found the lastest registration will overwrite the previous registration,
that
means we could register them both in the same SLD. (we checked this in Technical system area).
How could we do this? It makes us crazy........
Thanks very much
Ray

Dear Stefan,
Thanks so much for your anwser.
But the dilemma is in one SLD we achieved this, but it is only for one case and we could
not apply this for other systems.
This is the snapshot in our SLD for techical system:
Name                                        Host                             Version                                     Last Update
D01   on eisdq01                     eisdq01                         700                                           2010/12/06 12:45
D01   on eisdv01                     eisdv01                         640                                           2010/12/06 11:40
We don't know if this is the illusion that SLD could do this? But for other systems, e.g two Q systems
the lastest registration will overwrite the previsou one.
Thanks very much.
Welcome suggestions from very guru.
Ray

Problem creating new ABAP Technical System in SLD

I newly installed a ECC 5 IDES system (ABAP + JAVA) on my computer for ABAP and Webdynpro learning.
I got problem when I try to create new ABAP Technical System in SLD.
I put my steps of installation here so you know my full story.
1. Install Central Instance (Non-unicode);
2. Install Database Instance (Non-unicode);
3. Install Java add-in on ABAP;
4. Configure the HTTP connection parameters in J2EE Engine Visual Administrator
All of the above steps are successful.
Now my Webdynpro application need to access a Function Module, so I want to create a JCo connection in Webdynpro Content Administrator, but both application server and message server are not available, so I can't create any connection.
I go back to SLD to register ABAP Technical System step by step below:
1.      Choose Home ® Technical Systems.
2.      Choose New Technical System.
3.      Select the AS ABAP radio button.
4.      Choose Next.
5.      Enter system details (Installation number, host name).
6.      Choose Next.
7.      Enter message server and central application server details.
8.      Choose Next.
9.      Choose Next.
10.    Add New Client 800, leave logical name blank, click Add.
11.    Choose Next.
12.    Here the system says 'No product available', the whole effort make no sense.
I tried every possible settings, but at step 12 it keeps telling me 'No product available'.
This is the problem I want to fix.
Can anyone help me?
Thanks a lot in advance.

hi,
use th following thread,
No products installed while adding a Technical ABAP System in the SLD.
Regards
Jayapriya

How to register AS Java in Solman SLD right?

Hello Community,
i have little difficulties with our solution manager (7.01). I want to register a java system (netweaver portal 7.3) for implementing support package stacks. But i don't know how to do it right.
I tried it manually.
At first i created a server, then database and the product system in TA SMSY. My Product system is SAP NW 7.3 -> sid: GSP. The technical systems are: Java Extensions, AS JAVA, EP Core, Enterprise portal. All of them are relevant for the product system and assigned to a technical Java System.
When i start the mopz and create a new maintenance transaction i can see my system. Now i can choose:
Calculate Files Automatically - Recommended or Select Files Manually.
I want to chose the automatic version but i get this error: Wrong Input data: Wrong or higher EHP version found SAP EHP1 FOR SAP NETWEAVER 7.3
So how to do it right. Is there any way to register the java stack autmatically in the solman sld? Any ideas?
And is there any other way to get the support package stacks für a java stack? It is very hard to select and downlaod each of the nearly 100 packages manually.
Thanks for your help.

Hi Simon,
Please find below the steps to do this:
1. Please confirm which SLD your SOLMAN is poiting to.(Is it local SLD itself or some other Central SLD).
2. For Managed ABAP system, go to RZ70 of the managed system and put SLD details and send the data to SLD from there.
3. For Managed Java system, if it is netWeaver 7.3, Login to NWA since you dont have VA in netweaver 7.3.
follow the below link to update the data supplier in netweaver 7.3. Once the you have all the details, push the data from this system to SLD.
For Netweaver 7.3 Systems:
http://help.sap.com/saphelp_nw73/helpdata/en/48/b682df96655295e10000000a42189b/frameset.htm
For System where we have VA:
http://help.sap.com/saphelp_nw04/helpdata/en/ea/cd2e807e0e45bf9da67354f452fc05/content.htm
4. Verify if your ABAP and Java data are available in SLD.
5. If your landscape fetch job is running, it will automatically update your SOLMAN system, or go to transaction SMSY_SETUP and run the job. check once the landscape fetch job is finished in SM37.
This should help.
Please avoid creating manuall entries. If you have created manuall entries in SOLMAN, delete them.
Regards,
Sunny

Problem with business systems in SLD

Hey guys
i m doing a IDOC to file scenario and m creating two business systems in SLD
the first one uses the logical system name of the R/3 server and has been configured as WAS ABAP.
when i try to create the second one as a third party using the logical system name i defined in BD54(on R/3 server),i get the error sayin that a business system already exist with the logical system name.
i do have one businees system which is using the same logical system but that has been configured as WAS ABAP.
cant i assign two different business names to same logical systems?
thanx
ahmad
Message was edited by:
Ahmad

Hey
thanx ,now when i try to use the same business system name for the R/3 server in the second scenaario,i dont see the business system in ID,i did cache refresh,
also just want to make sure
i have configured my SLD as under for the first scenario
created two business system,first one is using the logical system name of the R/3 server configured as WAS ABAP and the second one is configured as third paarty and using the logical system name created in BD54.
do these setting looks good to u?
now can i use both these business system in my second IDOC to File scenariio?
thanx
ahmad

Register a MOSS system to SLD

Similar Messages

Maybe you are looking for