Register and manage data
Hi, i am trying to figure out the simplest way to register and manage a group of kids for a program and mange them in an excell spreadsheet
FormsCentral can help you with that. I suggest you try out our free account to see if it meets your needs.
formscentral.acrobat.com
Randy
Similar Messages
-
EData and Manage Data in BPC for Excel Hanging
Hi -
Running BPC NW 7.0...was working fine and this morning, anytime go into eData or Manage Data options, BPC for Excel hangs, until we have to go into Task Manager and kill the process. Is there anything (on the server or client side) that could cause this? Other e-menus appear to be working okay. Any ideas to resolve?
Thanks,Hi,
We are also facing the same issue in QA system. However we are on BPC7.5 SP05 Patch 1.
The system hangs when we go to eDATA. We then have to kill the session from Task Manager.
Any suggestions?
Regards,
Rashmi -
Verizon is using the Elipsis tablets to steal data from their customers. The only way to stop data from registering as cellular data is to pull the SIM card. This occurs with wifi enabled and cellular,dara disabled. If,you take your tablet to a Verizonstore they will upgrade your data plan to cover the overage and credit the upgrade. You will then have to remember to downgrade your plan or continue to pay for more data. Verizon, how would you feel if I walked into one of your stores and started filling my pockets with merchandise? If cought can I just give the product back and say "oops, sorry"
Today, my FCC complaint hit the same person working on the BBB complaint. Jimmie has been very nice and seems willing to work with this problem. We have been able to come to an agreement. I paid the purchase price for the phone and he returned my upgrade and unlimited data plan. This is what would have occurred if Verizon had given me correct information to begin with. I am happy with this result. He also brought quite a few instances concerning the handling of my transfer and upgrade that did not follow proper procedure. I am also confident that I would not have resolved this without complaining to BBB and or FCC. Verizon had no interest in solving the problem nor did they show any propensity to keeping a 20 year client. Even though this last CSR was very polite and helpful, his sole job is to respond to formal Federal and State complaints. He is required by law to address every complaint and report the reporting agency the agreed upon results - good or bad. Again, I suggest - If you are not getting the proper customer service, complain to someone outside of Verizon. Jimmie had not received any complaints registered with Verizon directly and I still have not had any contact with any other management representative that I was told would call.
-
Hi
I have SharePoint 2013 farm and installed Workflow Manager 1.0 and configured it and have been runing fine for several months. I upgraded this farm to SP 1 and then started having some issue with publish WF 2013 with task in SPD.
I re-Registered using Register-SPWorkflowService command and that fixed the problem and WorkFlow Manager running again OK. It has been couple of monthle and now I am having the problem again but with a different error on SPD
So doing what I did before, I tried to re-Registered WFM but this time getting the error below
Register-SPWorkflowService : The data or messaging layer is unavailable. Please retry
after 300 seconds.
The only possible resolution that I found is to add the -AllowOAuthHttp in my Register-SPWorkflowService cmdlet but that didnot not resolve the problem. I tried that anyway eventhough we do not allow http.
I did some checking for status and configuration and Get-SBFarmstatus showing all WFM services are running OK
I browsed to the WFM server https://servername:12290 and get the same error
- <Errorxmlns:i="http://www.w3.org/2001/XMLSchema-instance">
<Code>UnexpectedError</Code>
<Message>The data or messaging layer is unavailable. Please retry after 300
seconds.</Message>
</Error>
If anyone have advise / suggestion to resolve this issue, please share
Thanks in advance for all comments
SwanlHi Swanl,
Please refer to the article below for troubleshooting actions for workflow manager:
http://blogs.msdn.com/b/vincent_runge/archive/2014/01/07/troubleshooting-actions-for-sharepoint-2013-workflows.aspx
Moreover, activate workflow manager logs and see if there is any error message that could be help.
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] .
Rebecca Tu
TechNet Community Support -
Extraction and loading of Training and Event Management data (0HR_PE_1)
hello,
I've got the following doubt:
before BI 7.0 release, extractor 0HR_PE_1 extracts event data (eventid, attendee id, calday,...) but if you load straight to cube 0PE_C01, as Calendar year/month needs a reference date (for example, event start date), you'll get total duration of event in hours or days refered to event star date.
So in a query filtered by month, you get total duration of an event that starts in the filtered month but it couldn`t end until few months later o year later, so you don´t get appropiate information.
Example:
Event calday Hours
10004377 20081120 500 but from event_attr event end date is 20090410.
In a query filtered by 200811 you get total duration time (500 hours when in 200811 event hours have been 20) or if you filter by any month of 2009 you don´t get information of duration of that event.
I had to create a copy of standar cube (without calday, only Calendar year/month, Calendar year in time dimension) and disaggrate data creating as many entries for an event as months lasts and adjust calculation of ratios duration of event (duration of event in each month/ total duration of event).
The question is: Is there any improvement or change on business content in BI 7.0 to treat Training and Event Management data? Has anybody had to deal with that?
Thank you very much.
IRBHi,
TEM data is stored in HRP tables.
You can load the catalog by creating LSMWs for objects Business event group (L), Business event types (D), Locations (F), Organizers (U) as per requirement.
LSMW for tcode PP01 can be used to create these objects.
To create Business Events (E) you can create LSMW for PV10/PV11.
To book attendee create LSMW for tcode PV08 as here you can specify the actual business event ID which reduces ambiguity.
tcode PV12 to firmly book events
tcode PV15 to follow up
Hope this helps.
Regards,
Shreyasi. -
Training and Event Management Data Load
Hello Team
Would appreciate if any of you can advice on how to load Training and Event management data. I think its stored in HRP tables.
I'm working on an upgrade assignment.
ThanksHi,
TEM data is stored in HRP tables.
You can load the catalog by creating LSMWs for objects Business event group (L), Business event types (D), Locations (F), Organizers (U) as per requirement.
LSMW for tcode PP01 can be used to create these objects.
To create Business Events (E) you can create LSMW for PV10/PV11.
To book attendee create LSMW for tcode PV08 as here you can specify the actual business event ID which reduces ambiguity.
tcode PV12 to firmly book events
tcode PV15 to follow up
Hope this helps.
Regards,
Shreyasi. -
ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified in windows server 2008 r2.I made a application in asp.net c#.I am using ODBC connection.When I deployed my application in windows server2008 r2.There
is no Microsoft ODBC driver shown in ODBC Data source administrator.Then I go to the C:\Windows\SysWOW64 and open Odbcad32.exe and add Microsoft ODBC2 driver for Oracle and when I run my application I got following error
ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified
I am using follwoing string
<connectionStrings>
<add name="theconnetion" connectionString="DSN=abdb;UID=abc;PWD=xyz"/>
</connectionStrings>
Guide me What I do?Did you add a System DSN or a User DSN? If you added a User DSN from your own login, the asp.net application will not be able to use it unless its application Pool in IIS is configured to run under the same credentials that you used for creating
the DSN. It's better if you add a System DSN.
Also, be careful to ensure that you are using a 64 bit DSN, unless you configure the application to run in 32 bits. If the 64 bit application attempts to use the 32 bit driver you get the same error message "Data source name not found and no default
driver specified". See this KB article:
http://support.microsoft.com/kb/942976/en-us -
Getting Training and Event Management Data using IT0031
Scenerio:
One of the Employee Is Retired. Now we hire it again for the same role ( extending its period after posting it as retired).
So the good thing that we can use the IT0031 "Reference Personnel Numbers" to get the desired ITs and found that can get other cutomized ITs by checking in the "Copy Infotype" attribute of IT records.
Now this seems to be valid if we are in the same module
but waht if i want to get this magic "Referencing of ITs" done for the "Training and Event Managment" Data of the employee.
Is it Possible Automatically ... or have to go fro ABAP... (I will not prefer ABAP)...
I hope i have stated the problem clearly ...
Feedback ... need it ASAP ...Hi,
TEM data is stored in HRP tables.
You can load the catalog by creating LSMWs for objects Business event group (L), Business event types (D), Locations (F), Organizers (U) as per requirement.
LSMW for tcode PP01 can be used to create these objects.
To create Business Events (E) you can create LSMW for PV10/PV11.
To book attendee create LSMW for tcode PV08 as here you can specify the actual business event ID which reduces ambiguity.
tcode PV12 to firmly book events
tcode PV15 to follow up
Hope this helps.
Regards,
Shreyasi. -
Batch management - Shelf life and Production date
Hi All,
I am working with batch management where i did all the setting of characterestics, Batch class and neccessary settings. i am working with three characterestics shelf life expiration, production date and last goods reciept.
I have to active shelf life and production date in Migo screen so that at the time of recieving my characterestics can store data. kindly help in customizing setting
Thank you in advance
MajidHi,
You need to activate shelf life expiration check in T.Code OMJ5 for movement type 101 and also plant.
This will activates the entry of Shelf Life expiration/Production Date at the time of goods receipt.
If you are using std. SAP Characteristic (LOBM) for Manufacturing Date,Best Before Date and Goods Receipt Date then the value of this characteristic will updates automatically in Batch ,depends on your goods receipt data.
Regards,
Dhaval -
Hey everyone, So I am trying to get a report onto the server, and in BIDS I kept getting a login screen repeating over and over when I tried to deploy my report, so I tried to upload the file at http://<servername>/Reports This worked, but then trying
to run this report from http://<servername>/Reports did not work either because "An error has occurred during report processing. (rsProcessingAborted) Cannot create a connection to data source 'FTYDataSource'. (rsErrorOpeningConnection) For more information
about this error navigate to the report server on the local server machine, or enable remote errors" Anyways I tried to add a New Data Source (which I would use in the report) at http://<servername>/Reports, type ODBC, with the connection string Dsn=blah_blahblah.
I try to test the connection here and get the error ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified This is really getting old fast, everything I try, a new error comes up. Granted I am new at this,
but this still should not be this troublesome. Does anyone have any ideas on what could FINALLY allow me to just put a report out onto the server?!? THANK YOU in advance for ANY help.Hi,
Please try setting the credentials of the datasource.
1. Double click and open the datasource in your project.
2. Click on the credentials tab, and click on option button 'Use this username and password'
3. Enter the username and password to connect to the datasource
4. Deploy or upload the datasource to the report server and try accessing the reports.
Hope this helps.
Please click "Mark as Answer" if this resolves your problem or "Vote as Helpful" if you find it helpful.
BH -
Dear all,
When I create a notification in SAP Work Manager 6.0, the notification gets created in the back-end with Start Date equal to Current Date + 1 day and End Date equal to Current Date + 3 days.
Can you advise where I can customize this behaviour, so that the Start Date is for example equal to the Current Date and End Date being 14 days in the future? Is this something that would need to be configured in Agentry Editor or within the ABAP stack?
Many thanks for your support.
Pavel
Tags edited by: Michael ApplebyHi Jason,
We went this route and identified the initial values, and tried to modify those.
No impact though, as if those values are being overwritten elsewhere (whatever value we set, no change on the backend).
Please see the attachments with screenshots of Agentry Editor.
Many thanks.
Pavel -
Hi I have SQL2012 installed on my local machine and have also installed MySQL 5.6.23 installed with a test database.
I also have my SQL connector installed and MYSQL ODBC Driver 3.51.
Which happily connects to the Mysqldb.
The Datasource Name : mySQL conn
TCP/IP Server : localhost and Port :3306
User root
with pwd
On the SQL side I have used the following
EXEC master.dbo.sp_addlinkedserver
@server = N'MYSQLSRV',
@srvproduct=N'mySQL conn',
@provider=N'MSDASQL',
@datasrc=N'mySQL conn'
However when I try to selet using open query
SELECT * FROM OPENQUERY ( [MYSQLSRV], 'SELECT * FROM students' )
it comes back with
OLE DB provider "MSDASQL" for linked server "MYSQLSRV" returned message "[Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified".
Msg 7303, Level 16, State 1, Line 1
Cannot initialize the data source object of OLE DB provider "MSDASQL" for linked server "MYSQLSRV".
I cant understand what I have done wrong . Any help in this would be great as Ive hit a bit of a brick wallHi Robert3975,
In addition to other post, please also note the following things.
1. If you use the 32-bit driver on a 64-bit machine, please run the 32bit version of "odbcad32.exe" by running "c:\Windows\SysWOW64\odbcad32.exe"
from Start/Run menu and
create your ODBC DSN. However, for the 64-bit driver, use c:\windows\system32\odbcad32.exe to create your ODBC DSN. For more details, please review this similar
thread.
2. Expand the folder Providers under Linked server directory in SSMS and go to properties of MSDASQL provider and configure it properly as described in this blog:
Creating Linked server to MYSQL from SQL Server.
Thanks,
Lydia Zhang
If you have any feedback on our support, please click
here.
Lydia Zhang
TechNet Community Support -
Import and Management of Video Files by Date Still Broken
It really is very disappointing that after 3 versions, and 110 bug fixes, basic things like importing or managing a video file by date is still completely broken.
Even more troubling, is that for someone who uses LR3 this is a very obvious problem, and should be very easy to fix.
When you import a file on a wide range of cameras the date that is used for the video file as far as LR3 is concerned is the date you are importing it, not the date it was taken. This makes any management of the file, especially when managed next to pictures, very difficult.
The problem, as far as I can tell, is that in Windows, a file has both a 'Date Created' and a 'Date Modified'. 'Date Created' is whenever the file was created on the PC. If you bought a new computer and transferred a bunch of files over on 30/12/2010, all of your files will have a 'Date Created' that is 30/12/2010 regardless of when the photos or videos were taken. Or if you take a video on September 1st and import it onto your computer September 15th, it will have a 'Date Created' of September 15th.
'Date Modified' however lists the date that the file was last changed. For video files, that most likely was the date the video was shot.
Every program I have ever used for video files has always organized them by Date Modified (when organizing them by date). For example, its the default in Windows 7 Explorer when showing video files, all the video files listed by the date you have taken them. Date Created really doesnt have any useful information.
Its inexplicable to me why LR3 uses Date Created instead of Date Modified. It is a glaring error, that should be easily fixed. Microsoft can manage to do it right, as a byproduct in its OS, Im not sure why an imaging company in a $400 piece of specialist software cannot.
And just in case this is overlooked as a minor problem, it certainly is not. It happens to the following cameras:
D90 (first camera to shoot video)
D3s (thought by many to be the best low light camera)
D7000 (likely to be Nikon's most important DSLR)
D3100 (likely to be Nikon's most purchased DSLR)
Canon S95 (one of 2 most popular P+S for DSLR owners)
Fuji 31fd (Ill never forget you!)
And those are just the cameras I have on my desk, Im sure it happens to many others.
Also, when importing these files by date, LR3 will import them into a folder 1 date later then the date that LR3 is using for the file. So, just to be clear, you could take a video on May 1st, import it into LR3 on May 2nd and LR3 would say it was taken May 2nd, and it would be placed in the folder for May 3rd.
Im really not sure why something so basic has not been addressed in so long, and it makes any sort of managment of video files by date in LR3 useless.
Very disappointing.I agree that the wrong file system date is being used. But I scanned all my Lightroom files (manually) tagged with 'video'. When the file contains suitable metadata with a capture time that is used. When that's missing, the (wrong) file system date is used.
Interestingly I even found one camera where the dates were originally right (in 2009), then disappeared for a while (probably due to a firmware upgrade!) and then came back again. Summary of what I found:
Very old (Philips) webcam / format AVI / no metadata visible / wrong date
Canon Powershot A80 / format AVI / metadata visible / right date
Nokia N73 cellphone / format MP4 / no metadata / wrong date
Canon EOS 5D Mark II around 2009 / format MOV / metadata visible / right date
Canon EOS 5D Mark II around 2010 / format MOV / no metadata / wrong date
Canon EOS 5D Mark II around 2011 / format MOV / metadata visible / right date
So my conclusion is that the camera makers are making a bit of a mess when they introduced video. Nikon introduced its video a year or so later than Canon. I don't know if "no metadata" means that there is none, or that Adobe just doesn't like the format. But given the pattern of the firmware updates with Canon, it looks like Canon and Adobe ultimately agreed on the format. But in any case Lightroom (I am using 3.4.1) has a bug w.r.t. its fallback scenario of reading file system dates.
In my case, the dates changed when I copied all my data from one disk (old NAS) to a new one (new NAS). It is disconcerting that you get the copying date despite comparison tools declaring the files to be identical (Beyond Compare 3 also keeps an eye on date differences).
Hope this helps, Peter -
What is data archiving and DMS(Data Management System) in SAP
what is data archiving and DMS(Data Management System) in SAP
Welcome to SCN. Before posting questions please search for available information here and in the web. Please also read the Rules of Engagement before further posting.
Edited by: kishan P on Aug 31, 2010 1:06 PMHi,
Filtering at the IDoc Level
Identify the filter object (BD59)
Modify the distribution model
Segment Filtering
specify the segments to be filtered (BD56)
The Reduced IDoc Type
Analyze the data.
Reduce the IDoc type (BD53)
Thanks and regards. -
Managing Org units and Master Data in project structure
How are Org units and Master data managed at the project structure? What would be the appropriate place holders for them in the structure. Should we manage it at the top of the project structure or within the business scenarios/processes. On what basis should we decide this? How would this impact in case of a global template rollout?
Please share your experiences regarding this.
Thanks.
Mikeany talented guy do this way.
i think that ur working in E2E project work
before singoff ur business process u should give to ur users master data templets..they collect for masterdatas in before realization phase...that time u should know how many specifications is there and in spections how many in quantitative and how many qualitative u will indentify. if any query let me back.
Edited by: Lakshmiananda prasad on Oct 6, 2009 11:48 AM
Maybe you are looking for
-
Please Help My External Speakers Are'n't Working
I am using a powerbook g4 (titanium) and OS 10.4.10. For some reason, my headphone jack plays sound when I plug in headphones but not when I plug in my speakers. Bought new pair of speakers and they still do not get sound ( Is this a coincidence?) I
-
Right now my ipod classic is set on 'music'. When I push the munu button, it will not go back to the main menus, but it will still go forward and select and play music normally. I tried resetting it by holding the menu and center buttons until the ap
-
No save as dialog box in elements 11, don't even get an error message.
Tonight I tried to use save as to save an image in elements 11 and nothing happened. No errors, no save as boxes, just nothing. It won't just save either, again, nothing happens. I've been running this program for months and this is the first time
-
Error ORA-28009: connection as SYS should be as SYSDBA or SYSOPER
hi, i try to connect to oracle in c#2005. I'm using oralce 10.2.0.3.0 in window vista. i can connect as user scott , but can't do the same thing with use sys like sysdba. i encouter error : "ORA-28009: connection as SYS should be as SYSDBA or SYSOPER
-
Mini Bridge isn't showing thumbnails
Hi. Everything with Photoshop and Bridge CS5 is working super accept for the mini bridge ??? It just shows "waiting for Bridge CS5" all the time and nothing ever happen and everything else is working perfect i think. Running iMac 27" i5, 8GB of Ram,