Register HFM Adapter Error

have tried to register the target adapter for HFM (FM11X-G5-E) in FDM 11.1.2.1 I get an error message 76 Path not found? I copied the dll file into both the Adapters folder and SharedComponents folders. Does anyone know how to resolve this issue?

Copy the entire "AdapterComponents" folder that was extracted from the adapter .zip file to the Oracle\Middlware\EPMSystem11R1\Products\FinancialDataQuality\SharedComponents directory
Login to the application using the workbench client on the FDM application server
Choose File > register adapter and open the SharedComponents\AdapterComponents\fdmFM11xG5E\fdmFM11xG5E.dll file

Similar Messages

FDM 11.1.2.1 register HFM adapter problem

Hi experts,
i have seen many post about this problem when connecting to HFM using FDM, but never when you register the adapter, that's why i post this.
Our environment is Windows 2008 R2 64 bit with FDM11.1.2.1 32x installed. We have imported the file FM11x-G5-E.xml from FM11X-G5-E_1005.zip that worked fine. when File > register > we picked fdmFM11XG5E.dll from D:\Oracle\Middleware\EPMSystem11R1\products\FinancialDataQuality\SharedComponents\AdapterComponents\fdmFM11xG5E
it returns error 53 - File not found error
Please assist
Thanks
Andrew

Small update, Oracle support suggested Doc 1211618.1, done the steps, still having the problems. waiting for a web session with them.

The Messaging Engine failed to register the adapter for "WCF-BasicHttp" for the receive location

Could anyone please help in resolving the following
error:
Server Error in '/BizTalkXXXMyAppWcfService' Application.
The Messaging Engine failed to register the adapter for "WCF-BasicHttp" for the receive location "/BizTalkXXXMyAppWcfService/XXXMyApp.svc".
Please verify that the receive location exists.
It does exist: When I go to All Artifacts >> Receive Locations I can see: WcfService_BizTalkXXXMyAppWcfService/XXXMyApp
Also it is Enabled, green, up and running.
…and that the isolated adapter runs under an account that has access to the BizTalk databases. – Checked, the BizTalkUser has all the permissions to access BizTalk databases.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Runtime.InteropServices.COMException: The Messaging Engine failed to register the adapter for "WCF-BasicHttp" for the receive location "/BizTalkXXXMyAppWcfService/XXXMyApp.svc". Please verify that the receive
location exists, and that the isolated adapter runs under an account that has access to the BizTalk databases.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[COMException (0xc0c01666): The Messaging Engine failed to register the adapter for "WCF-BasicHttp" for the receive location "/BizTalkXXXMyAppWcfService/XXXMyApp.svc". Please verify that the receive location exists, and that the isolated
adapter runs under an account that has access to the BizTalk databases. ]
   Microsoft.BizTalk.TransportProxy.Interop.IBTTransportProxy.RegisterIsolatedReceiver(String url, IBTTransportConfig callback) +0
   Microsoft.BizTalk.Adapter.Wcf.Runtime.WcfIsolatedReceiver`2.RegisterIsolatedReceiver(Uri uri) +318
[AdapterException: Failed to register isolated receiver for address "/BizTalkXXXMyAppWcfService/XXXMyApp.svc"; receive location does not exist or is disabled.]
   Microsoft.BizTalk.Adapter.Wcf.Runtime.WcfIsolatedReceiver`2.RegisterIsolatedReceiver(Uri uri) +875
   Microsoft.BizTalk.Adapter.Wcf.Runtime.WebServiceHostFactory`3.CreateServiceHost(String constructorString, Uri[] baseAddresses) +363
   System.ServiceModel.HostingManager.CreateService(String normalizedVirtualPath) +1423
   System.ServiceModel.HostingManager.ActivateService(String normalizedVirtualPath) +50
   System.ServiceModel.HostingManager.EnsureServiceAvailable(String normalizedVirtualPath) +1132
[ServiceActivationException: The service '/BizTalkXXXMyAppWcfService/XXXMyApp.svc' cannot be activated due to an exception during compilation. The exception message is: Failed to register isolated receiver for address "/BizTalkXXXMyAppWcfService/XXXMyApp.svc";
receive location does not exist or is disabled..]
   System.Runtime.AsyncResult.End(IAsyncResult result) +890624
   System.ServiceModel.Activation.HostedHttpRequestAsyncResult.End(IAsyncResult result) +180062
   System.Web.AsyncEventExecutionStep.OnAsyncEventCompletion(IAsyncResult ar) +107

Hi,
This seems to be a permission issue.
Makesure account used in the application pool is a member of the BizTalk Isolated Host Users group.
Also its working considering either make the ASPNET user account a member of your BizTalk Isolated Host Users group to make sure it has access to the biztalk databases (or change the asp.net services to run under a different account, which would need
to be done from the framework's core .config files)
Regards
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful.

Lsnrctl start newlist, TNS-12560: TNS:protocol adapter error

Hello I am using Windows 7. Oracle 11g R2. Firstly I created my directory C:\oracle\net. Then I created an entry for TNSADMIN in the windows registry entering the newly created c:\oracle\net.
I ran Oracle Net Manager. The path C:\oracle\net is displayed in the title bar.
Using Oracle Net Manager I created my listener with the following settings as saved to listener.ora in the C:\oracle\net directory
# listener.ora Network Configuration File: C:\oracle\net\listener.ora
# Generated by Oracle configuration tools.
ADR_BASE_NEWLIST = C:\app\oracle\product\11.2.0\dbhome_2\log
NEWLIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 127.0.0.1)(PORT = 2521))
From the command line prompt I type ......
lsnrctl start newlist
The following is returned
starting tnslnsr: please wait...
followed by
TNS-12560: TNS:protocol adapter error
TNS-00530: TNS:protocol adapter error
??? How do I resolve this? thanks

The above scenario is part of a learning exercise (ex6.1) from the chapter on configuring the Oracle Net Environment OCA Oracle Database 11g Administration I Exam Guide by John Watson from the Oracle Press series.
127.0.0.1 is the loopback address of (all) local machines.
This step is step 16 of the learning exercise. Until I resolve it I cannot complete the remaining steps!
The steps of the exercise are as below..........................
Configure Oracle Net
In this exercise, you will set up a complete Oracle Net environment, using graphical
and command-line tools. Where there are differences between Windows and Linux,
these will be pointed out.
1. Create a directory to be used for the Oracle Net configuration files, and set
the TNS_ADMIN variable to point to this. It doesn’t matter where the direc-
tory is, as long as the Oracle user has permission to create, read, and write it.
On Linux:
mkdir /u01/oracle/net
export TNS_ADMIN=/u01/oracle/net
Ensure that all work from now is done from a session where the variable has
been set.
On Windows:
mkdir d:\oracle\net
Create and set the key TNS_ADMIN as a string variable in the registry in
the Oracle Home branch. This will typically be
HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\KEY_OraDb1g_home1
2. Check that the variable is being read by using the TNSPING command from
an operating system prompt:
tnsping orcl
This will return an error “TNS-03505: Failed to resolve name” because there
are no files in the TNS_ADMIN directory. On Windows, you may need to
launch a new command prompt to pick up the new TNS_ADMIN value from
the registry.
3. Start the Net Manager. On Linux, run netmgr from an operating system
prompt; on Windows, launch it from the Start menu. The top line of the Net
Manager window will show the location of the Oracle Net files. If this is not
the new directory, then the TNS_ADMIN variable has not been set correctly.
4. Create a new listener: expand the Local branch of the navigation tree,
highlight Listeners, and click the +.
5. Enter a listener name, NEWLIST, and click OK.
6. Click Add Address.
7. For Address 1, choose TCP/IP as the protocol and enter 127.0.0.1 as the
host, 2521 as the port. The illustration that follows shows the result.
8. Create a new service name: highlight Service Naming in the navigation tree,
and click the +.
9. Enter NEW as the net service name, and click Next.
10. Select TCP/IP as the protocol, and click Next.
11. Enter 127.0.0.1 as the host name and 2521 as the port and click Next.
12. Enter SERV1 as the Service Name, and click Next.
13. Click Finish. If you try the test, it will fail at this time. The illustration that
follows shows the result.
14. Save the configuration by clicking File and Save Network Configuration.
This will create the listener.ora and tnsnames.ora files in the
TNS_ADMIN directory.
15. Use an editor to check the two files. They will look like this:
LISTENER.ORA:
NEWLIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 127.0.0.1)(PORT = 2521))
TNSNAMES.ora:
NEW =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 127.0.0.1)(PORT =
2521))
(CONNECT_DATA =
(SERVICE_NAME = SERV1)
16. From an operating system prompt, start the listener with lsnrctl start
newlist.
17. From an operating system prompt, test the connect string with tnsping new.
000
18. Connect to your database using operating system authentication, bypassing
any listener, with sqlplus / as sysdba.
19. Set the service_names and local_listener parameters for the running
instance (memory only, not the parameter file) and register the new service
name with the new listener:
alter system set service_names=serv1 scope=memory;
alter system set local_listener=new scope=memory;
alter system register;
20. From an operating system prompt, confirm that the new service has registered
with the new listener with lsnrctl services newlist.
21. Confirm that the new network environment is functional by logging on:
sqlplus system/oracle@new

The Messaging Engine failed to register the adapter for "WCF-BasicHttp"

Hi,
I have a strange problem with BizTalk 2013 on Windows 2012.
It is with exposing an orchestration or schema as a web service, I always get the error "The Messaging Engine failed to register the adapter for 'WCF-BasicHttp' "
This happens also am sure I did the followings:
-Enabled the receive location
-Have separate pool for each web service
-The pool user is part of the Isolated Group & IIS_Users group
-The user has access to BizTalk databases
I tried the procedure on different environment, and it works just fine, what is causing this on this environment really I don't know!!
Is there something I should do on the IIS?

I just resolved it, the issue was with the server name exceeding 15 characters; which resulted in mismatch in credentials, since Windows will only take the first 15 characters.
So, I shortened the server name to 15 characters, and everything now works fine.
Thanks again,

Hfm.appcontainer error

Hi,
After configuring 11i for HFM I cannot connect to HFM via the Workspace. I get an hfm.appcontainer error. I would usually refer to the HFM.CONF file to rectify this but this file doesn't seem to exist with 11i. Any help would be appreciated.
Thanks
G

I assume that you still have the first problem described in your first posting, i.e. that the HFM system described in your second point is reinstalled (and overwritten).
So if you have tried my first suggestion and still you don't see the consolidations option in the navigate menu, then you may re-run the full configuration of Hyperion Reporting and Analysis. Make sure you select all the options (Register with SS, Product Options, Configure Database, Configure Financial Reporting, Deploy to Application Server and Configure Web Server). You will have to stop serveral services before you proceed, i.e. Workspace, Financial Reporting Web Application and Web Analysis, in order to release ports. After the configuration is complete, make sure to start the appropriate services (or even better restart your system to play it safe).
KN

Help with error program not registered CPI-C error CM_ALLOCATE_FAILURE_RETR

I have the following connection error in SM59 ...
Connection error program ZCCCOM_NZ_PMH01 not registered / CPI-C error CM_ALLOCATE_FAILURE_RETRY.
I have deleted and re-registered the program but still no connection. Any ideas as to what/where I am going wrong would be fantastic!!
RFC Destin = CCCOM
Type = T
Gateway Host = ntchsapqas
Gateway service = sapgw00
ERROR program ZCCCOM_NZ_PMH01 not registered
LOCATION SAP-Gateway on host ntchsapqas / sapgw00
DETAIL TP ZCCCOM_NZ_PMH01 not registered
COMPONENT SAP-Gateway
COUNTER 19364
MODULE gwr3cpic.c
LINE 1593
RETURN CODE 679
SUBRC 0
RELEASE 46D
TIME Tue Jun 10 14:47:28 2008
VERSION 2

Something helpful related to this
The program in the above error should be registered in the gateway for this connection test to complete successfully. The server program rfcexec is responsible for its registration on the gateway.
To register the program login into the OS level as sudo su - <sid>adm and execute the following command.
rfcexec u2013g<program id> -a<gateway host name> -x<gateway service>
rfcexec is the server program name, the <program id> can be obtained from SM59, it is case sensitive and should match with the entry in SM59. The <gateway host name> and <gateway service> can be obtained from the transaction SMGW. When this command is executed it goes to a hanging loop.
The connection will fail once this command is terminated or the user executing this command logs off
To avoid this, instead of using the above mentioned command an entry should be made in the file saprfc.ini
To do this, execute the following command
sudo su - <sid>adm
rfcexec u2013D<destination name>
<destination name> is the RFC destination name in SM59
So now we are done with registering the server program, but how do we check it is registered, once a server program is registered it is displayed in the Logged on clients in SMGW.
In transaction SMGW choose GOTO-> Logged on clients. There should be an entry for the server program in the screen that is displayed with system type Registered_TP (which indicates that the program is registered)

Unable to create database due to ORA-12560, TNS protocol adapter error

Hello,
I'm trying to create an 8.1.7.0 database on a W2k server, but it is failing because as soon as svrmgrl is launched, I get an ORA-12560, TNS: protocol adapter error:
D:\oracle\db_creation_scripts>D:\oracle\ora81\bin\svrmgrl @D:\oracle\db_creation_scripts\mterm62run.sql
Oracle Server Manager Release 3.1.7.0.0 - Production
Copyright (c) 1997, 1999, Oracle Corporation. All Rights Reserved.
ORA-12560: TNS:protocol adapter errorEcho ON
SVRMGR> connect INTERNAL/manager
ORA-12560: TNS:protocol adapter error
SVRMGR> startup nomount pfile="D:\oracle\admin\mterm62\pfile\initmterm62.ora"
LCC-00161: Message 161 not found; product=RDBMS; facility=MGR
My ORACLE_HOME, ORACLE_SID, and TNS_ADMIN environmental variables are correctly set, and I'm able to tnsping the listener.
I've enabled tracing, and my client trace file is:
--- TRACE CONFIGURATION INFORMATION FOLLOWS ---
New trace stream is d:\trace\client_trace.log_2084_9.trc
New trace level is 6
--- TRACE CONFIGURATION INFORMATION ENDS ---
--- PARAMETER SOURCE INFORMATION FOLLOWS ---
Attempted load of system pfile source d:\oracle\ora81\network\admin\sqlnet.ora
Parameter source loaded successfully
Attempted load of local pfile source D:\oracle\db_creation_scripts\sqlnet.ora
Parameter source was not loaded
-> PARAMETER TABLE LOAD RESULTS FOLLOW <-
Successful parameter table load
-> PARAMETER TABLE HAS THE FOLLOWING CONTENTS <-
TRACE_DIRECTORY_SERVER = d:\trace
TRACE_DIRECTORY_CLIENT = d:\trace
NAMES.DIRECTORY_PATH = (TNSNAMES, HOSTNAME)
SQLNET.CRYPTO_SEED = 4fhfguweotcadsfdsafjkdsfqp5f201p45mxskdlfdasf
TRACE_FILE_CLIENT = client_trace.log
TRACE_FILE_SERVER = server_trace.log
SQLNET.AUTHENTICATION_SERVICES = (NTS)
TRACE_UNIQUE_CLIENT = on
TRACE_LEVEL_CLIENT = ADMIN
TRACE_LEVEL_SERVER = ADMIN
--- PARAMETER SOURCE INFORMATION ENDS ---
--- LOG CONFIGURATION INFORMATION FOLLOWS ---
Log stream will be "D:\oracle\db_creation_scripts\sqlnet.log"
Log stream validation not requested
--- LOG CONFIGURATION INFORMATION ENDS ---
nigini: entry
nigini: Count in NI global area now: 1
nigini: Count in NI global area now: 1
nrigbi: entry
nrigbni: entry
nrigbni: Unable to get data from navigation file tnsnav.ora
nrigbni: exit
nrigbi: exit
nigini: exit
niqname: Hst is already an NVstring.
niqname: Inserting CID.
niotns: entry
niotns: niotns: setting up interrupt handler...
niotns: Not trying to enable dead connection detection.
niotns: Calling address: (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=BEQ)(PROGRAM=oracle)(ARGV0=oracleMTERM62)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))')))(CONNECT_DATA=(SID=MTERM62)(CID=(PROGRAM=D:\oracle\ora81\bin\SVRMGRL.EXE)(HOST=SERV0354)(USER=tarisa))))
nsmal: 140 bytes at 0x12493f0
nscall: connecting...
nladini: entry
nladini: exit
nladget: entry
nladget: exit
nlpcaini: entry
nlpcaini: prg =
nlpcaini: arg[0] =
nlpcaini: arg[1] =
nlpcaini: exit
nsmal: 420 bytes at 0x12542f0
nsmal: 1712 bytes at 0x12572f0
nsopen: opening transport...
ntpcon: entry
ntpcon: toc = 1
sntpcall: entry
snlpcss: entry
ntpcon: exit
nserror: nsres: id=0, op=65, ns=12560, ns2=0; nt[0]=530, nt[1]=2, nt[2]=0; ora[0]=0, ora[1]=0, ora[2]=0
nsopen: unable to open transport
nsmfr: 1712 bytes at 0x12572f0
nsmfr: 420 bytes at 0x12542f0
nladget: entry
nladget: exit
nsmfr: 140 bytes at 0x12493f0
nladtrm: entry
nladtrm: exit
nioqper: error from nscall
nioqper: nr err code: 0
nioqper: ns main err code: 12560
nioqper: ns (2) err code: 0
nioqper: nt main err code: 530
nioqper: nt (2) err code: 2
nioqper: nt OS err code: 0
niomapnserror: entry
niqme: entry
niqme: reporting NS-12560 error as ORA-12560
niqme: exit
niomapnserror: returning error 12560
niomapnserror: exit
niotns: Couldn't connect, returning 12560
niotns: exit
nigtrm: Count in the NI global area is now 0
nnfgdei: entry
nrigbd: entry
nrigbd: exit
nigtrm: Count in the NL global area is now 0
My tnsnames, listener and sqlnet.ora files are very simple:
## BEGIN TNSNAMES.ORA
# TNSNAMES.ORA Network Configuration File: D:\oracle\ora81\NETWORK\ADMIN\tnsnames.ora
# Generated by Oracle configuration tools.
MTERM62 =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.3.1.75)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = mterm62)
(INSTANCE_NAME = mterm62)
INST1_HTTP =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 10.3.1.75)(PORT = 1521))
(CONNECT_DATA =
(SERVER = SHARED)
(SERVICE_NAME = mterm62)
(PRESENTATION = http://admin)
# LISTENER.ORA Network Configuration File: D:\oracle\ora81\NETWORK\ADMIN\listener.ora
# Generated by Oracle configuration tools.
LISTENER =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = serv0354)(PORT = 1521))
SID_LIST_LISTENER =
(SID_DESC =
(ORACLE_HOME = D:\oracle\ora81)
(SID_NAME = mterm62)
TRACE_LEVEL_LISTENER = ADMIN
# SQLNET.ORA Network Configuration File: D:\oracle\ora81\NETWORK\ADMIN\sqlnet.ora
# Generated by Oracle configuration tools.
TRACE_DIRECTORY_CLIENT = d:\trace
TRACE_UNIQUE_CLIENT = on
TRACE_DIRECTORY_SERVER = d:\trace
SQLNET.AUTHENTICATION_SERVICES= (NTS)
TRACE_FILE_CLIENT = client_trace.log
TRACE_FILE_SERVER = server_trace.log
TRACE_LEVEL_CLIENT = ADMIN
TRACE_LEVEL_SERVER = ADMIN
NAMES.DIRECTORY_PATH= (TNSNAMES, HOSTNAME)
SQLNET.CRYPTO_SEED = 4fhfguweotcadsfdsafjkdsfqp5f201p45mxskdlfdasf
Does anyone have any ideas what else I can check. I'm a Unix person, not a Windows person, which is making it even more complicated. If I was on Unix, I'd just blow everything away and start again from scratch, but since I'm not sure how to remove all traces from the registry, etc., I don't want to try that on this machine. There was already one other database created, but it's not goign to be used.
Any help would be greatly appreciated.
regards,
Tarisa.

hi,
thanks for the info. the problem, as it turns out, was that I was connected to the db server via a terminal service (Microsoft Management Console), which for some reason caused probelms with TNS. After I connected directly to the machine using VNC, I was able to create the database with no problems. strange but true.
regards,
Tarisa.

"TNS: Protocol adapter error" while creating a database

Hi All,
I´m new to Oracle and trying to create a database.
We use Oracle 8.1.7
I´m using the Database Configuration Assistant. The problem is when creating the database I get the error:
TNS-12560 TNS: Protocol adapter error
Any help will be really appreciated.
Thanks in advance,
Carlos.

Do you have ORACLE_HOME and/or ORACLE_SID defined in the environment which are different than the settings for the new database that you are trying to create?

TNS-12560: TNS:protocol adapter error, ORA-12535: TNS:operation timed out

I installed Oracle 9i (9.2.0.1.0) on a Windows XP machine (the machine is in a domain). There were no errors during the instalation, but I have problems connecting from the same machine using the sid. Here are some examples from a command promt:
D:\>tnsping orcl9i
TNS Ping Utility for 32-bit Windows: Version 9.2.0.1.0 - Production on 31-OCT-20
08 17:43:22
Copyright (c) 1997 Oracle Corporation. All rights reserved.
Used parameter files:
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)
(HOST = timisoara01)(PORT = 1521))) (CONNECT_DATA = (SERVICE_NAME = orcl9i)))
TNS-12560: TNS:protocol adapter error
D:\>sqlplus "sys/pass@orcl9i as sysdba"
SQL*Plus: Release 9.2.0.1.0 - Production on Fri Oct 31 17:54:54 2008
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
ERROR:
ORA-12535: TNS:operation timed out
Enter user-name:If I don't use the sid I can connect:
D:\>sqlplus "sys/pass as sysdba"
SQL*Plus: Release 9.2.0.1.0 - Production on Fri Oct 31 18:05:46 2008
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected to:
Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production
With the OLAP and Oracle Data Mining options
JServer Release 9.2.0.1.0 - Production
SQL>If I go to services I see that the service is running: OracleServiceORCL9I Started.
Thx.

Yes, the XP firewall is running. During the Oracle instalation it poped up twice, but I selected 'Unblock'. I can't turn it off because it is running using the domain settings, but I can add exceptions (programs or ports). Port 1521, tnsping or sqlplus are not blocked and there is an option 'Display a notification when Windows Firewall blocks a program' witch is checked.

File adapter error after updating to SP19 (INBOUND_BINDING_ERROR)

File adapter error after updating to SP19 (INBOUND_BINDING_ERROR)
Hi all,
im having some troubles after the installation of SP19 (from SP16 in NW04) with File Adapter (File->Idoc scenario).
In message monitoring (Adapter Engine), I have several messages with status "System Error". The error text is :
Received XI System Error. ErrorCode: INBOUND_BINDING_ERROR
ErrorText: ErrorStack: Error in sender agreement for party '', service 'LEGACY_DEV', interface namespace 'http://XXXXX.com/XXXXXX', interface 'INTERFACE_OB' No sender agreement found for , , , , ,
Im sure that the Integration Directory settings have not been changed. So I tried the following, but the problem persists:
- Deactivation/Activation of File Adapter channel
- check that user XIISUSER is not locked
- checked SXI_CACHE (it seems ok)
- Many CPA full refresh
- Dummy modifications of File Adapter channels (a dummy modification of the description)
- Reboot J2EE
I've seen that someone else had problems after upgrading to SP19. I'd really appreciate any suggestion of how to solve my issue.
Thank you
Manuel

Hi Prabhu,
I've already tried to restart server, but nothing happened. (Before update to SP19, the interface worked well).
This is the error log from message monitoring:
 2007-01-16 16:37:34 Success Channel cc_File_Snd_Bolle: Entire file content converted to XML format
2007-01-16 16:37:34 Success Send binary file "BOLLE_20061229142059.CSV" from FTP server "AS810T:/sapinbound", size 8733 bytes with QoS EOIO
2007-01-16 16:37:34 Success Application attempting to send an XI message asynchronously using connection AFW.
2007-01-16 16:37:34 Success Trying to put the message into the send queue.
2007-01-16 16:37:35 Success Message successfully put into the queue.
2007-01-16 16:37:35 Success The application sent the message asynchronously using connection AFW. Returning to application.
2007-01-16 16:37:35 Success The message was successfully retrieved from the send queue.
2007-01-16 16:37:35 Success File "BOLLE_20061229142059.CSV" successfully archived on FTP server "AS810T" as "/sapinbound/bolle/20070116-163735-245_BOLLE_20061229142059.CSV"
2007-01-16 16:37:35 Success The message status set to DLNG.
2007-01-16 16:37:35 Error Received XI System Error. ErrorCode: INBOUND_BINDING_ERROR ErrorText: ErrorStack: Error in sender agreement for party '', service 'LEGACY_DEV', interface namespace http://XXXXX.com/XXXXXX', interface 'INTERFACE_OB' No sender agreement found for , , , , ,
2007-01-16 16:37:35 Error Transmitting the message to endpoint http://SERVERNAME:8000/sap/xi/engine?type=entry using connection AFW failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: INBOUND_BINDING_ERROR:. 
2007-01-16 16:37:35 Success The asynchronous message was successfully scheduled to be delivered at Tue Jan 16 16:42:35 CET 2007.
2007-01-16 16:37:35 Success The message status set to WAIT.
2007-01-16 16:42:35 Success Retrying to send message. Retry: 1
After this, the system try to resend the message, and the same error appears several times.
Ty,
Manuel

Receiver Mail adapter Error

HI All
   i    am doing   a   scenario     SFTP    to mail adapter,   i am sending a    file    to    SFTP ADAPTER and   Mail adapter   send the   mail to    clint,   i am   using java mapping ,   i have checked the message in    RWB mesage is    fail   in mail adapte,
   ERROR :   Message processing failed. Cause: java.lang.Exception: java.io.IOException: server does not support PLAIN or LOGIN authentication
anyone suggest me     soloution?

Hi Pankaj,
Remove your mail server user id and password and keep authentication mode as Plain and try in mail adapter configuration.
You can try accessing ID from within IR via menu options or via a direct URL.
Thanks,

TNS-12560: TNSrotocol adapter error

Iu2019m installing SAP ERP 6.0 on a Windows server 2008 with Oracle 10.2.0.4.0.
First of all I installed the Oracle software by means of Oracle Universal Installer.Then I used the Sapinst tool. At the step u201CConfigure Oracle server Networku201D I get an error. In the lsnrctl.log file I can read:
TNS-12560: TNSrotocol adapter error
TNS-00530: Protocol adapter error
These are my .ora files in the path <oracle-home>\NETWORK\ADMIN::
1 )LISTENER.ORA
ADMIN_RESTRICTIONS_LISTENER = on
LISTENER =
(ADDRESS_LIST =
(ADDRESS =
(PROTOCOL = IPC)
(KEY = DEV.WORLD)
(ADDRESS=
(PROTOCOL = IPC)
(KEY = DEV)
(ADDRESS =
(COMMUNITY = SAP.WORLD)
(PROTOCOL = TCP)
(HOST = SAP-BTdemo)
(PORT = 1527)
STARTUP_WAIT_TIME_LISTENER = 0
CONNECT_TIMEOUT_LISTENER = 10
TRACE_LEVEL_LISTENER = OFF
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = DEV)
(ORACLE_HOME = F:\oracle\DEV\102)
2) SQLnet.ora:
AUTOMATIC_IPC = ON
TRACE_LEVEL_CLIENT = OFF
NAMES.DEFAULT_DOMAIN = WORLD
05.01.06 unsorported parameter now
#NAME.DEFAULT_ZONE = WORLD
05.01.06 set the default to 10
SQLNET.EXPIRE_TIME = 10
SQLNET.AUTHENTICATION_SERVICES = (NTS)
05.01.06 set to default
#TCP.NODELAY=YES
05.01.06 set to 32768
DEFAULT_SDU_SIZE=32768
3) tnsname.ora:
DEV.WORLD=
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS =
(COMMUNITY = SAP.WORLD)
(PROTOCOL = TCP)
(HOST = SAP-BTdemo)
(PORT = 1527)
(CONNECT_DATA =
(SID = DEV)
(GLOBAL_NAME = DEV.WORLD)
I have set the following Environment Variables:
u2022 ORACLE_HOME = F:\oracle\DEV\102
u2022 ORACLE _SID= DEV
u2022 TNS_ADMIN= F:\oracle\DEV\102\NETWORK\ADMIN
I have installed Oracle by Universal Installer and, in the Server Manager, I got only the following Oracle Service:
OracleDEV102iSQL*Plus
If I use the command lsnrctl start from Windows prompt I get the same error.
Can anyone help me?

Ok, I made all the things that you say: installed Oracle sw, installed the Opatch end started SAPinst.
But SAPinst stops when configuring oracle server network. I really don't understand what to do. If i write the command of LSNRCTL and tnsping the DEV (my DBsid) i have the following error:
LSNRCTL> services
Connecting to (ADDRESS=(PROTOCOL=IPC)(KEY=DEV.WORLD))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
 64-bit Windows Error: 2: No such file or directory
Connecting to (ADDRESS=(PROTOCOL=IPC)(KEY=DEV))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
 64-bit Windows Error: 2: No such file or directory
Connecting to (ADDRESS=(COMMUNITY=SAP.WORLD)(PROTOCOL=TCP)(HOST=10.32.33.4)(PORT
=1527))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
 64-bit Windows Error: 61: Unknown error
LSNRCTL> status
Connecting to (ADDRESS=(PROTOCOL=IPC)(KEY=DEV.WORLD))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
 64-bit Windows Error: 2: No such file or directory
Connecting to (ADDRESS=(PROTOCOL=IPC)(KEY=DEV))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
 64-bit Windows Error: 2: No such file or directory
Connecting to (ADDRESS=(COMMUNITY=SAP.WORLD)(PROTOCOL=TCP)(HOST=10.32.33.4)(PORT
=1527))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
 64-bit Windows Error: 61: Unknown error
C:\SAPinst>tnsping DEV
TNS Ping Utility for 64-bit Windows: Version 10.2.0.4.0 - Production on 27-OCT-2
010 14:11:45
Copyright (c) 1997, 2007, Oracle. All rights reserved.
Used parameter files:
F:\oracle\DEV\102\NETWORK\ADMIN\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (COMMUNITY = SAP
.WORLD) (PROTOCOL = TCP) (HOST = 10.32.33.4) (PORT = 1527))) (CONNECT_DATA = (SI
D = DEV) (GLOBAL_NAME = DEV.WORLD)))
TNS-12541: TNS:no listener
Why isn't SAPINST able to use the listener??
Edited by: Paolo Rubino on Oct 27, 2010 3:16 PM

ORA-12560 TNS protocol Adapter error in 11g (11.1.0.6)

Hello All,
I have Oracle 11g installed on my machine and when i tried to log in to sql plus i got the error below:
ORA-12560 TNS protocol Adapter error
By setting the ORACLE_SID = orcl by browsing to the bin directory of Oracle Installation the above error disappaears and i am able to log in from sql plus.
My intention is to create a db backup for which i am trying to use the exp command...this time the same error appears.
Also the solution of setting the ORACLE_SID is cumbersome..everytimt i want to use sql plus i need to go in and set the ORACLE_SID.
Can anybody please help me out find a good solution for this?
Any help would be appreciated friends.....
Thanks in Advance!!!!!
Regards.
Alicia

Also the solution of setting the ORACLE_SID is cumbersome..everytimt i want to use sql plus i need to go in and set the ORACLE_SID.
Can anybody please help me out find a good solution for this?The solution depends on your (not specified) operating system...
Anyway, if you have more than one database it's normal that you have to set ORACLE_SID, if not how can Oracle know which database you want to access to ?
You can create batch files, one per database, or you can use connection strings, e.g. sqlplus username/password@<DB>.

ORA-12560: TNS:protocol adapter error in Oracle Forms...

Hi, I installed Oracle developer suite to use for Oracle forms but am getting "ORA-12560: TNS:protocol adapter error" when trying to run a form. The database is running locally on my PC.
I've run the command line to see if hostname matches up with the "HOST= " in the ".../network/admin/listener.ora " file match, they do. What can I try next? I did have Oracle 10gXE installed, which I have now removed. I'm including my tnsnames and listener file content:
# tnsnames.ora Network Configuration File: C:\oracle\product\10.2.0\db_1\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
LISTENER_ORCL =
(ADDRESS = (PROTOCOL = TCP)(HOST = frankenputer)(PORT = 1522))
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = frankenputer)(PORT = 1522))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
# listener.ora Network Configuration File: C:\oracle\product\10.2.0\db_1\network\admin\listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\oracle\product\10.2.0\db_1)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(ADDRESS = (PROTOCOL = TCP)(HOST = frankenputer)(PORT = 1522))
Thanks in advance for any help!

Of course you found another one. Each .and every Oracle database client home (such as developer, app server) has one.
Don't just change the port - the tnsnames.ora in the dev home does not point to a database service. It only points to an extproc [external procedure called by a database]. You need to put a database service entry into that file similar to the one in the database home. (Easiest solution - copy the tnsnames.ora from db home ... after you've made a backup)
And please don't tell me you are using Developer 6i - a simple Google search would verify that the networking is incompatible.

Register HFM Adapter Error

Similar Messages

Maybe you are looking for