Register new listener for newDB(with new Home) in existing 10.2.0.2 cluster

Dear Friends,
UAT Instance:
i have installed 10g cluster (10.2.0.2) and i have cretaed new 10g home and cretaed listener (with port ) and cretaed UAT database
No issues on the above
DEV Instance:
Now we have another database DEV and for this i have differnt oracle home (not same as UAT) and i created databases and converted to RAC but i want this database to be registered in the 10g existing cluster and the listener also i want to have new one with different port (not same as UAT)
so when we try to cretae new listener from new DB home it's throwing error.
"CRS-0215: could not start resource"
so please let me know how to
creating new listener with different port for new database having new DB home
and register it with the existing 10g cluster
Regards,
DB

Hi,
Is the database part of the cluster or not?
srvctl config database -d ... to find out if not add it to cluster
srvctl add database -d and then the instances
srvctl add instance -d dbname -i instance name
have a look in here for information related to listener/port
Changing Default Listener Port Number [ID 359277.1]
How to Create Multiple Oracle Listeners and Multiple Listener Addresses [ID 232010.1]

Similar Messages

HT1311 How can I get updates for apps with new Apple ID

How can I get updates for apps with new Apple ID. I have apps that I got for free, and some that I have purchased. I had to create a new Apple ID because I don't have a credit card now.

Apps will always be tied to the ID in which they were purchased or downloaded under. You can not change this unless you buy or download the free app using the new ID.

Can AirPort express be used for AirPlay with my home stereo, and to give my Xbox 360 a WIRED internet connection via ethernet, simultaneously?

I am considering buying an airport but I am not sure if it will work how I would like it to. I need it for two things. The first would be to use for AirPlay with my home stereo. The second would be to use as a way to give my Xbox 360 a WIRED internet connection via the ethernet port. I would like to do these things simultaneously, rather than constantly changing the configuration and being limited to a single function each time I do so.
Thanks!

The 802.11n AirPort Express Base Station (AXn) can be configured as a wireless Ethernet bridge. In this configuration, it would join an existing wireless network and its Ethernet port would be enabled for a wired client, like your Xbox 360. This configuration would also support AirPlay simultaneously.

Class not registered. Looking for object with CLSID:

Hi,
I had create a custom project system with the help of https://msdn.microsoft.com/en-us/library/vstudio/cc512961.aspx. And which is working fine that I can create a project with extension of .myproj in the VS Experimental Instance window. But when I go for
the properties in the created project, (Solution Explorer: Right click on the project folder and select properties) it will show an exception that "Class not registered. Looking for object with CLSID:{00000-00-00-000000}" How can I provide Properties
window for this project system or can I modify the Properties window for any other default VS project system? Please help me.

Hi mathikp,
I don't think you did something wrong while creating the project, but instead it could be the issue of environment, I would suggest you to validate following things:
1, Try to create another blank app to see if the exception still thrown.
2, Run with an administrator privilege to check if you can get the project work..
I would not consider its as a coding issue but try to fix Visual Studio probably helps.
--James
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How do I set new tabs to open with my home page

When I open a new tab, it opens with bingle and I want it to open with Google, which is my home page.

You can do that by using an add-on such as:
* NewTabURL - https://addons.mozilla.org/firefox/addon/newtaburl
* New Tab Homepage - https://addons.mozilla.org/firefox/addon/new-tab-homepage

Want new tabs to open with my home page

although firefox opens with my home page, new tabs open with blank pages instead of my home page. how do i make new tabs open with my home page. i use windows vista.

You can do this with an add-on such as [https://addons.mozilla.org/firefox/addon/newtaburl/ NewTabURL].

Creating new Attributes for use with AttributedStrings

I trying to find a way to change the color of key strings in a phrase so that they stand out. For example.
the String (The water is HOT). I want the word HOT to be the color RED.
I have noticed in using the TextAttributes option on the AttributedString doesn't have an option to change a color for a particular word in a String only a way to swap the foreground and background colors. In general is there a way to add new attributes for doing the above example?
Just a note. This modification is not being done in an editor pane or text field. I'm looking for a way to do this without user interaction.

If you are not drawing this in an JEditorPane, but just with DrawText, you will have to split the text up your self, draw the first half, then switch colors, then draw the second half.

How do I download iLife for free with new macbook???

I just purchased a 13" Macbook Pro on Friday and am trying to figure out how to download iPhoto and iMovie on it. For some reason there is a cost for each program in the app store. I submitted an up-to-date request for Pages, Number, and Keynote which should be ok, and I have downloaded garageband for free in the app store. This is my very first mac so I was hoping someone can help with this. The link attached is on the apple site saying that the six programs are supposed to be free with new purchases.
http://www.apple.com/creativity-apps/mac/
Thanks!

Log into the APP store using the Apple ID that you used to set up the computer and go to purchases - you may have to accept the programs and then download and install them
LN

New camera for use with IM09

Looking at upgrading my camcorder and trying to figure out which would be best with IM09...
This is what I have been looking at...
http://www.bhphotovideo.com/c/product/576009-REG/Canon3085B001_VIXIA_HG20_AVCHDHard.html#features
I tend to lean towards the Canons, but how does this JVC compare?
http://www.bhphotovideo.com/c/product/572458-REG/JVCGZ_HD30US_GZ_HD30_Everio_HighDefinition.html#features
Then the other questions I have are:
Should I got HD based or stay MiniDV?
The Canon says it records progressive footage at 60i, does that mean it is not true progressive?
Will an MiniDV HD cam improve my standard MiniDV captures, will it up scale them?
Thanks for the help...
Message was edited by: s.m.t.

Sheryl Kingstone wrote:
I believe the real answer is not HDV vs ACHDV but progressive vs interlaced format. Imovie works better with progressive vs interlaced. However, shooting in 1080 60p needs a mac pro to really edit properly. Plus you need to trick imovie to consume it. However, I would still look into shooting progressive. Do a search on progressive and there are a few threads on it.
Yes, I have discovered that by working with IM09 with my standard DV cam. But it appears to me that both of the new formats will record in 30p and 24p (at least on the canon line). So will I not be importing progressive with either? Your right that is my top priority (and the major reason for getting a new cam) is to be able to record and import in progressive format...
The more I read, the more I am tending to lean toward HDV. I just want to make sure the qualities are the same...
Message was edited by: s.m.t.

Installing OS on a new HDD for imac with no installed HDD

Hi all
I am looking to buy an iMac 27", but it doesnt come with a HDD
So I wanted to know if I buy a new HDD for it, can I install Mavericks onto it and fit it to the iMac? How would I go about doing this?
I dont have access to another mac but I do have access to a windows machine. Can I do it from there?
Any help appreciated
Thanks

Where are you buying an iMac 27-inch, Late 2009 model that has no internal hard disk drive?
Having to assume it was removed by an original owner, does the computer work? Was it tested by use of an externally enclosed HDD with a correct bootable system installed?
There are various repair and upgrade guides online, several topics among them and several are free to view or use. There likely is an iFixit guide that may cover that vintage of iMac 27-inch build year model.
Not sure which iMac 27-inch model guide applies to your computer,
some appear here http://www.ifixit.com/Device/iMac_Intel
While considering the hard disk drive, be sure that if there are any sensors or special cables required to be in place and attached to a new replacement, they are in place and working; some users of later models found when a hard disk drive was replaced, their fans ran at high and uncontrolled speeds due to lack of sensor input. The default situation was for the computer act as though the unit was overheated. And third party fan control software to set a fan at low slower speeds does not take into account faster speeds are needed to cool iMacs. Yours may not exhibit this issue, but I am not certain either way.
When you get it set up, with HDD and original Snow Leopard installed & updated to 10.6.8, be sure to check to see if there are any hardware or firmware updates. I see there was one listed for your model and it may already be installed...
•27-inch iMac EFI FW Update 1.0:
http://support.apple.com/kb/DL1031
Hopefully this helps...
Good luck & happy computing!

Macbook pro hard drive transfer to new i7 Mac Mini with new SSD

I've seen some of the threads on drive transfer but wanted to get more input. I currently have late 2008 Macbook Pro with 750gb hard drive running Lion latest version. I bought a new Mac Mini i7 with dual 500 gb drives. I also have new SSD 512gb. I want to use SSD as boot drive for Mac Mini and install 750gb drive as 2nd drive. I know how to remove and install the drives. What is best sequence, software and procedure to execute the exchange? Any help would be greatly appreciated in advance.

Hello,
Not clear on your circumstances, but...
Best way to get an exact bootable copy of your old drive to the new one is with Carbon Copy Cloner...
http://www.bombich.com/software/ccc.html

Mouse motion listener for JTable with JScrollpane

Hi All,
I have added mouse motion listener for JTable which is added in JScrollPane. But if i move the mouse, over the vertical/horizontal scroll bars, mouse motion listener doesn't works.
So it it required to add mousemotionlistener for JTable, JScrollPane, JScrollBar and etc.
Thanks in advance.
Regards,
Tamizhan

I am having one popup window which shows address information. This window contains JTable with JScrollPane and JButton components to show the details. While showing this information window, if the mouse cursor is over popupwindow, it should show the window otherwise it should hide the window after 30 seconds.
To achieve this, i have added mouse listener to JPanel, JTable, JButton and JScrollPane. so if the cursor is in any one of the component, it will not hide the window.
but for this i need to add listener to all the components in the JPanel. For JScrollPane i have to add horizontal, vertical and all the top corner buttons of Scroll bar.
Is this the only way to do this?

SCCP 8945 not registering with new instal for 2921 with CME 10.0

I have phones which won't register at all. They seem to be missing files, but I downloaded the CME 10.0 ZIP and TFTPd it to the router and phones have access to all 10 files that I will list below. This is a snip of the failures from the actual phone have been attached. TFTP bindings have been attached. Telephony service and voice service voip config has also been attached. Sho ephone register has also been attached.
Seems like the main problem so far is the phones cannot find the files, but the files needed are no where to be found at cisco.com under the 8945 downloads page.
I need all the help I can get

Also these files I have in TFTP now on the router are the only ones I found on the 8945 downloads page on cisco.com:
9       111552 Aug 23 2014 09:49:36 -07:00 SCCP8945/BOOT894x.0-0-2-0.bin.sgn
10      110004 Aug 23 2014 09:50:16 -07:00 SCCP8945/BOOT8941_8945.0-0-1-0.bin.sgn
11     3145116 Aug 23 2014 09:57:06 -07:00 SCCP8945/SCCP894x.9-4-2-8.bin2.sgn
12     3145116 Aug 23 2014 10:00:52 -07:00 SCCP8945/SCCP894x.9-4-2-8.bin3.sgn
13     3145116 Aug 23 2014 10:05:08 -07:00 SCCP8945/SCCP894x.9-4-2-8.bin4.sgn
14     3145116 Aug 23 2014 10:09:20 -07:00 SCCP8945/SCCP894x.9-4-2-8.bin5.sgn
15     3145116 Aug 23 2014 10:12:50 -07:00 SCCP8945/SCCP894x.9-4-2-8.bin6.sgn
16     3145116 Aug 23 2014 10:16:30 -07:00 SCCP8945/SCCP894x.9-4-2-8.bin7.sgn
17     3145116 Aug 23 2014 10:21:34 -07:00 SCCP8945/SCCP894x.9-4-2-8.bin8.sgn
18     2210816 Aug 23 2014 10:25:10 -07:00 SCCP8945/SCCP894x.9-4-2-8.bin9.sgn
19         667 Aug 23 2014 10:25:38 -07:00 SCCP8945/SCCP894x.9-4-2-8.loads
Files My phones seem to be missing are:
English_United_States/gb-sccp-sip.jar
United_States/g3-tones.xml
CTLSEP<MAC Address>
Failure is here:
Authenticating SCCP894x.9-4-2-8.loads file successfully.
BOOT894x.0-0-2-0.bin.sgn
SCCP894x.9-4-2-8.bin1.sgn
SCCP894x.9-4-2-8.bin2.sgn
SCCP894x.9-4-2-8.bin3.sgn
SCCP894x.9-4-2-8.bin4.sgn
SCCP894x.9-4-2-8.bin5.sgn
SCCP894x.9-4-2-8.bin6.sgn
SCCP894x.9-4-2-8.bin7.sgn
SCCP894x.9-4-2-8.bin8.sgn
SCCP894x.9-4-2-8.bin9.sgn
image_flag = 9
14:03:46, 08/01/2013 : upgrade SCCP894x.9-4-2-8.bin1.sgn from 10.244.47.65
Error code 1: No such file
File transfer error.
tftp_download_file, 185
tftp_download_file, 202
14:03:46, 08/01/2013 : upgrade SCCP894x.9-4-2-8.bin1.sgn fail (read fail)
*** cfgmgr_loads_task 785 callback return ***
14:03:46, 08/01/2013 : Upgrade Failed
Need to download locale resources. (English_United_States, , 10.244.47.65/getfontfail, ge
fontfail, 10.244.47.65)
Download English_United_States/gb-sccp-sip.jar ...
Error code 1: No such file

How do I set up my new tc to work with my home hub 2?

Hi. This is my first time in this community, so hope I'm doing this right! I have a bt home hub2 and have just purchased a 2tb time capsule to go with my brand new iMac. Please help me to set up the tc to work with the bt home hub. I want to use the tc wireless capability and think I will have to set up a new network and switch off bt wireless, but I'm not sure. Bit of a novice at this kind of thing so any help you can give in nice simple steps would be greatly appreciated. Thanks in advance.

In UK BT generally use PPPoA authentication only so you will have to keep using the home hub as the main router. Put the Time Capsule.. TC.. in bridge mode. To do this go to the airport utility, on menu selection go to internet, and make sure it is set to ethernet for method of connection, and in connection sharing, select bridge. Then select update.. it will probably list some issues like password needing changing and access via wan etc .. almost all of which you can simply ignore.. as you are not using it in router mode.
The TC will save the setting and restart.. it will now exist as a wireless access point and switch on the network. The WAN is swapped to LAN, so there is no WAN port as such but it is still convenient to use WAN port marked <...> ethernet between home hub and the TC. Then setup wireless as you like. You can turn off the wireless in home hub, and just use the TC.. or use both, on different channels. That is no big problem. Set the security for the wireless is important and I would also manually set wireless channels and use different name for the 2.4ghz and 5ghz wireless. But just start and learn what you need to as you go along. Getting the basics working should be fairly easy. Some of the more complex stuff you just need to read carefully the instructions..
And read this site.
Carefully and until your eyes bleed. Almost everything you want to know is there already.
http://web.me.com/pondini/Time_Machine/FAQ.html
There are many areas he covers.
http://web.me.com/pondini/Time_Machine/Home.html

Ipad 2 or new computer for Garageband? new home studio - Help

Any advice would be great. I built a home studio loft in an old barn in my yard. Problem is my main computer (imac) that I do all my work on has to stay in the house (we all use it - family) SO .. I have to decide what to record on in the studio. I have an ipad 2 .. do I by the interface for it? Use it to recoed, and then trasfer the garageband files /recordings from the ipad to my imac in the house ... and do my editing there? Or do I look for a 3 year old macbook or some type of used Apple computer for the studio?
PS .. my set up curently is
imac 3.06 GHz Intel Core 2 Duo
Garageband 09 ver. 5.1
TASCAM US-144 usb audio interface
MXL V63M - MIC
Then obviosly all my live instuments including a Roland TD4 drum kit (that is not easy to mix once recorded - kick drum)
My studio monitors or SAMSON USB Studio dock ... and they are not great
Any advice/coments on the equipment would be great too .. thanks eveyone
John

jvmix wrote:
Could I record with that and as you say .. do the heavy lifting in the house on the imac
if you already have it, try it and see how the workflow is.
the caution is that this too is a one way street: the new version of GB on the iMac will open the older files, but once you save them you won't be able to open the newly saved files on the old machnie in the old version of GB

Register new listener for newDB(with new Home) in existing 10.2.0.2 cluster

Similar Messages

Maybe you are looking for