Register Rejected: security error

Hi
i have a CCM 9 with autoregister enabled, trying to register a CIPC said "register rejected: security error"
I have other CIPC and runs fine, but in one is failing, even with a manual registering said the same message.
any idea where can be the problem? In CCM is in rejected state.
Thanks.                

I was having the same error.
CUCM, CAPF and CTL service was running which i turned off. After deleting the Phones when i tried to re-register the phones they started to give me this error. "Registeration Rejected : Security Error" . I also switched the tftp from Publisher to a subscriber server.
Solution : I manually added each phone to the system since they were few phones. You can Use BAT to add the phones if you too many phone having the same problem.
Hope that helps
If any one figure out why it happened please share it here.
Thanks
Regards
Mazin Muhammad

Similar Messages

  • How do I stop security error messages being displayed?

    Multiple messages are displayed when I'm in hotmail saying "Due to Mozilla's security features a link was blocked" etc. It says there was a security error and gives long references. I have to close these messages down before my page will load properly, otherwise the page width is extended and I have to scroll to see things.

    Hi,
    I have a smiliar problem. And I wish I had an answer to yours! It seems that nobody knows the answer! I want to change the mobile phone number which people see when I send txt messages over skype. It confuses people when they see my Australian number (the one originally registered in skype) when I am overseas, people always think I am in Australia. The problem is I can never seem to remove that number I originally used when I set up skype a few years ago. I have changed every instance in skype (profile page etc) where the number appeared but it still displays when I send messages... Anyone know?? Thanks!

  • DreamweaverCtrls.dll Security Error

    Hi,
    I am using Dreamweaver 8, Asp.net and the control
    "DreamweaverCtrls.dll" to connect and access a mySQL database.
    Everything goes just fine in my local Web Server (windows
    2003, IIS 6), but when I upload the site to my web host then I get
    the following security error:
    Description: The application attempted to perform an operation
    not allowed by the security policy. To grant this application the
    required permission please contact your system administrator or
    change the application's trust level in the configuration file.
    Exception Details: System.Security.SecurityException:
    Security error.
    Line 1: <%@ Page Language="C#" Debug="true"
    ContentType="text/html" ResponseEncoding="iso-8859-1" %>
    Line 2: <%@ Register TagPrefix="MM"
    Namespace="DreamweaverCtrls"
    Assembly="DreamweaverCtrls,version=1.0.0.0,publicKeyToken=836f606ede05d46a,culture=neutra l"
    %>
    Line 3: <MM:DataSet
    After researching in several forums I found out that the
    possible solutions are:
    - Use a fixed DreamweaverCtrls.dll file
    - Instruct the Web Hosting provider to lower their security
    settings (unlikely)
    - Modify the config.web file's settings in order to make the
    .dll trusted
    I really don't know how to implement the above suggestions,
    does anybody know how? or does anybody know of another possible
    solution?
    Thank you.

    I have never seen that sort of error using the control. I
    would suggest that
    you contact your host and see if there is anything unique
    about the way that
    they implement ASP.Net
    Paul Whitham
    Certified Dreamweaver MX2004 Professional
    Adobe Community Expert - Dreamweaver
    Valleybiz Internet Design
    www.valleybiz.net
    "mcclausky" <[email protected]> wrote in
    message
    news:esjthb$qra$[email protected]..
    > Hi,
    >
    > I am using Dreamweaver 8, Asp.net and the control
    "DreamweaverCtrls.dll"
    > to
    > connect and access a mySQL database.
    >
    > Everything goes just fine in my local Web Server
    (windows 2003, IIS 6),
    > but
    > when I upload the site to my web host then I get the
    following security
    > error:
    >
    >
    Description: The application attempted to perform an operation
    not
    > allowed by the security policy. To grant this
    application the required
    > permission please contact your system administrator or
    change the
    > application's
    > trust level in the configuration file.
    >
    > Exception Details: System.Security.SecurityException:
    Security error.
    >
    > Line 1: <%@ Page Language="C#" Debug="true"
    ContentType="text/html"
    > ResponseEncoding="iso-8859-1" %>
    > Line 2: <%@ Register TagPrefix="MM"
    Namespace="DreamweaverCtrls"
    >
    Assembly="DreamweaverCtrls,version=1.0.0.0,publicKeyToken=836f606ede05d46a,cultu
    > re=neutral" %>
    > Line 3: <MM:DataSet
    >
    >
    > After researching in several forums I found out that the
    possible
    > solutions
    > are:
    >
    > - Use a fixed DreamweaverCtrls.dll file
    > - Instruct the Web Hosting provider to lower their
    security settings
    > (unlikely)
    > - Modify the config.web file's settings in order to make
    the .dll trusted
    >
    > I really don't know how to implement the above
    suggestions, does anybody
    > know
    > how? or does anybody know of another possible solution?
    >
    > Thank you.
    >

  • Help with error program not registered CPI-C error CM_ALLOCATE_FAILURE_RETR

    I have the following connection error in SM59 ...
    Connection error        program ZCCCOM_NZ_PMH01 not registered / CPI-C error CM_ALLOCATE_FAILURE_RETRY. 
    I have deleted and re-registered the program but still no connection. Any ideas as to what/where I am going wrong would be fantastic!!
    RFC Destin = CCCOM
    Type = T
    Gateway Host = ntchsapqas
    Gateway service = sapgw00
    ERROR                program ZCCCOM_NZ_PMH01 not registered      
    LOCATION             SAP-Gateway on host ntchsapqas / sapgw00    
    DETAIL               TP ZCCCOM_NZ_PMH01 not registered           
    COMPONENT            SAP-Gateway                                 
    COUNTER              19364                                       
    MODULE               gwr3cpic.c                                  
    LINE                 1593                                        
    RETURN CODE          679                                         
    SUBRC                    0                                       
    RELEASE              46D                                         
    TIME                 Tue Jun 10 14:47:28 2008                    
    VERSION              2

    Something helpful related to this
    The program in the above error should be registered in the gateway for this connection test to complete successfully. The server program rfcexec is responsible for its registration on the gateway.
    To register the program login into the OS level as sudo su - <sid>adm and execute the following command.
    rfcexec u2013g<program id> -a<gateway host name> -x<gateway service>
    rfcexec is the server program name, the <program id> can be obtained from SM59, it is case sensitive and should match with the entry in SM59. The <gateway host name> and <gateway service> can be obtained from the transaction SMGW. When this command is executed it goes to a hanging loop.
    The connection will fail once this command is terminated or the user executing this command logs off
    To avoid this, instead of using the above mentioned command an entry should be made in the file saprfc.ini
    To do this, execute the following command
    sudo su - <sid>adm
    rfcexec u2013D<destination name>
    <destination name> is the RFC destination name in SM59
    So now we are done with registering the server program, but how do we check it is registered, once a server program is registered it is displayed in the Logged on clients in SMGW.
    In transaction SMGW choose GOTO-> Logged on clients. There should be an entry for the server program in the screen that is displayed with system type Registered_TP (which indicates that the program is registered)

  • Flex encounters "Security error accessing url.Unable to load WSDL"

    i have created a flex application which connects to SAP via web service.
    when i try to run my flex application i encounter the following error.
    "Security error accessing url.Unable to load WSDL"
    i went through various posts relating a BSP application and crossdomain.xml
    i have created the crossdomain.xml file in the application and
    i tried those options and still not able to figure out the problem.
    the security error is because of the absence of the crossdomain.xml file, and in which path should i be saving the file?
    Kindly help me solve the problem.
    Thanks in advance.

    Have you seen this blog
    "Crossdomain.xml" in ABAP Web AS Server cache

  • Security error accessing ur unable to load wsdl

    HI
    I am using a webservice(.net webservice) that is on my
    localhost and using it in flex application that is also on my
    system. Means both the webservice and flex application are on the
    same system.
    But when i gives the reference of the webservice using the
    system ip and run the application by the flex builder it generates
    the error as:
    mx.messaging.messages::ErrorMessage)#0
    body = (Object)#1
    clientId = "DirectHTTPChannel0"
    correlationId = "24CD6542-F141-1A05-BA35-00A108CB30A0"
    destination = ""
    extendedData = (null)
    faultCode = "Channel.Security.Error"
    faultDetail = "Destination: DefaultHTTP"
    faultString = "Security error accessing url"
    headers = (Object)#2
    messageId = "CC123DF0-0E6C-05FF-7894-00A109676283"
    rootCause = (flash.events::SecurityErrorEvent)#3
    bubbles = false
    cancelable = false
    currentTarget = (flash.net::URLLoader)#4
    bytesLoaded = 0
    bytesTotal = 0
    data = (null)
    dataFormat = "text"
    eventPhase = 2
    target = (flash.net::URLLoader)#4
    text = "Error #2170: Security sandbox violation:
    http://localhost:3000/MYCIMS/flex_bin/Design.swf
    cannot send HTTP headers to
    http://myip/MyServer/AdminWS.asmx."
    type = "securityError"
    timestamp = 0
    timeToLive = 0
    I have put crossdomain.xml file in the root of the localhost
    and made every changes possible in the crossdomain.xml file but the
    application is not running.
    Please somebody provide an effective solution, I have spend
    lots of time to resolve the problem but its not being....
    Thanks in advance
    Gopi Saini

    Have you seen this blog
    "Crossdomain.xml" in ABAP Web AS Server cache

  • Security error accessing url (Unable to load WSDL)

    Hi folks.
    I have a Flex project that use a WCF webservice. In my localhost everything is allright, but I want to upload my flex project to a web host (http://www.dorj.ir) and upload my WCF webservice to a server that has a valid IP...
    After going to http://www.dorj.ir, you can see this error
    Security error accessing url
    Unable to load WSDL. If currently online, please verify the URI and/or format of the WSDL (http://ip/service.svc?wsdl)
    I put the crossdomain.xml file in the root of my server:
    <?xml version="1.0"?>
    <!DOCTYPE cross-domain-policy SYSTEM "http://www.macromedia.com/xml/dtds/cross-domain-policy.dtd">
    <cross-domain-policy>
         <allow-access-from domain="http://www.dorj.ir" />
         <allow-http-request-headers-from domain="http://www.dorj.ir" headers="SOAPAction"/>
    </cross-domain-policy>
    But I have the same error, yet...!
    what should I do?!

    Have you seen this blog
    "Crossdomain.xml" in ABAP Web AS Server cache

  • I keep receiving security errors when trying to open a pdf.

    I keep receiving a security error when trying to run my javascript program, the function previously worked, but now creates an error after I entered the addWaterMark function. I have put my whole code below for my script.
    The basic function is to load a text file into an array which has the path and file location, open the document, add a watermark, save the file, close the file, then repeat for the next array position.
    I am using Acrobat Standard so I am unable to debug using the console, therefore I am struggling to understand what I am doing wrong. I will point out that I am not a fluent programmer, only have a basic knowledge of programming.
    Code
    app.addSubMenu(
      cName:"Extras",
      cParent:"Edit"
    app.addMenuItem(
      cName:"Import File",
      cParent:"Extras",
      cExec:"main()"
    function main()
      var fileCount = 0
      var listOfFiles = []
      listOfFiles = importData()
      amountOfFiles = listOfFiles.length
      for (var i =0; i<listOfFiles.length; i++)   //calculates amount of entries in the array listOfFiles
      newFile = openFile(listOfFiles[i]) //Opens current file
      var d = app.activeDocs; //Gets current document title name 
      addWater(d[0]);
      app.execMenuItem("Save");
      for( var x in d ) d[x].closeDoc();
    function addWater(myName)
    { app.alert("watermark",0);
      myName.addWatermarkFromText(
      cText: "OBSOLETE",
      cFont: "Arial",
      nFontSize:36,
      aColor: color.red,
      nOpacity: 0.5
    //function SaveFile saves the current file but with an addition of WM to the filename
    saveFile = app.trustedFunction(function(currentDoc, currentFileName)
      { app.alert("savefile",0);
      app.beginPriv();
      currentDoc.saveAs(currentFileName);
      app.endPriv();
    //function openFile which opens the file named in the variable currentFilename
    openFile = app.trustedFunction(function(currentFileName)
      {app.alert("openfile" + currentFileName,0);
      app.beginPriv();
      app.openDoc(currentFileName);
      app.endPriv();
    //importData function imports the paths and filenames contained in the list.txt located on the desktop
    importData = app.trustedFunction(function()
      {app.alert("import",0);
      app.beginPriv();
      cFilePath = "/C/Users/103019944/Desktop/File_List.txt";
      var stmData = util.readFileIntoStream(cFilePath);
      var cData = util.stringFromStream(stmData);
      var cMsg = cData;
      var fileArray = cMsg.split("\r\n");
      for (var i =0; i<fileArray.length; i++)
      return(fileArray);
      app.endPriv();

    I have found the error, you are quite correct I had an extra letter in the filename, I thought I'd checked this but just shows that sattention to detail is the key.
    The script works perfectly now, thanks you for your help, really appreciated.
    Thanks again
    Ben

  • How can I fix 2121 sandbox security error, local swf MP3 player test calls MP3's from website?

    1st Issue.  I am a new user and am fighting #2121, #2044 & #2048 Flash security errors in getting an MP3 player to work as I test the fla file in Flash CS4 on my local computer.  The fla in Flash and swf in Dreamweaver calls mp3 files from our host server on the internet.
    After reading various sparce posts and Adobe articles on this issue, I have added a crossdomain.xml file at our websites root (see file below) and added the code, flash.system.Security.allowDomain in line 1 of the action script of the flash fla to allow our site access (-see script below).  These efforts have helped get the player to work better on our test site.
    But, I am still getting the 2121 error within Flash CS4 as I debug the player or play the swf in live view within Dreamweaver.  Playing the fla or swf will lock-up the Flash 10 player and crash the program. I am having the mp3 player access the mp3 files from our web site as I test the fla.
    Here is the debug message I am getting:
    Attemping to launch and connect to Player using URL C:\Web Site Files\Plank Productions afc\Plank Productions 2010\site\MP3_List_Player_AS3.swf [SWF] C:\Web Site Files\Plank Productions afc\Plank Productions 2010\site\MP3_List_Player_AS3.swf - 209827 bytes after decompression SecurityError: Error #2121: Security sandbox violation: Sound.id3: file:///C/Web%20Site%20Files/Plank%20Productions%20afc/Plank%20Productions%202010/site/MP3%5FList %5FPlayer%5FAS3.swf cannot access . This may be worked around by calling Security.allowDomain.
    at flash.media::Sound/get id3()
    at com.afcomponents.mp3player::MP3Player/get id3()
    at com.afcomponents.mp3player::MP3Player/handleBuffe ring()
    Here is the crossdomain xml code:
    <?xml version="1.0" encoding="utf-8"?>
    <?xml version="1.0"?><!DOCTYPE cross-domain-policySYSTEM "http://www.macromedia.com/xml/dtds/cross-domain- policy.dtd">
    <cross-domain-policy>
    <allow-access-from domain="www.plankproductions.com" secure="false"/>
    <allow-access-from domain="plankproductions.com" secure="false"/>
    </cross-domain-policy>
    Here is the AS3 in line 1 of the Fla file that I added:
    flash.system.Security.allowDomain("www.plankproductions.com", "plankproductions.com");
    2nd Issue.  The online playback of the mp3 player will play about 4-7 mp3’s then lock-up in Internet Explorer 8 on a pc.  I think that is related to flash security, not sure, I do not know how to debug the mp3 player on the web site.
    http://plankproductions.com/pptemplate_afc_mp3.shtml
    Questions.
    -How can I resolve the error 2121?
    -What as3 code do I need to target the local c drive to have security clearance and work properly, is this the problem?
    -Why is the mp3 player locking up on the web page?
    Thank you in advance for any help.
    Operating System: Windows XP Professional, CS4 Web Premium

    Do you have the standard or debug player installed?  Such errors should not occur with the standard player.
    See http://helpx.adobe.com/flash-player/kb/find-version-flash-player.html#main_Find_Flash_Play er_version_type_and_capabilities__Flash_developers_only_

  • Today I tried to open Safari and what I was presented was several minimized windows stating that there was a security error detected, also a suspicious activity was found in my computer. How do I go by in getting this cleared off?  Help.  Thanks

    MAcBook Pro, 2.4 Ghz Intel Core 2 Duo, 4GB 1067Mhz DDR3, Software Mac OS X Lion 10.7.5 (11G63). 
    Problem:  i tried to open Safari about a couple of hours ago and I was presented with this error message block with an address of http://www.virushealthcheck.com. The message is; Windows detected security error, due to suspicious activity found on your computer.  Contact Windows Certified Live Tech ( 1.866.606.2003).  If I clk the OK button , there are multiple layered windows that will appear after that.  Can't get out of it , except to quit Safari.  earlier today before this happened I was on Facebook, Instagram, responding email cutting and paste transactions and saving it to Microsoft word.  then I turned off my lap top for several hours. When I turned it back on awhile ago, I discovered this problem.  on top of that aI can't even clear the history everything is gray out except for the Earlier today, and the day and date of the month. I tried several times to quit Safari, turn off and turn back on my lap top to no avail.  My question is; How do I go by to in getting this error message when I click on Safari? Does that mean that I might have a virus in my lap top? Please Help.  Thanks.

    Force Quit .
    Press command + option + esc keys together at the same time. Wait.
    When Force Quit window appears, select the Safari if not already.
    Press Force Quit button at the bottom of the window.   Wait.
    Safari will quit.
    Relaunch Safari holding the shift key down.
    http://www.thesafemac.com/fbi-ransomware-virus-rampant/

  • Security error while loading pdf file in jsp in firefox?

    When i type in the following link manually in firefox as " file://///172.16.2.1/copyediting/ELS/mallet.pdf", pdf file is loaded successfully in the firefox browser. PDF file is located in remote server which is referred by IP 172.16.2.1.
    I've assigned the Same link in a String in jsp page and tested it through my tomcat application as
    <%
    String linktotest="file://///172.16.2.1/copyediting/ELS/mallet.pdf";
    %>
    <a href="<%=linktotest%>">link</a>
    when i click on the hyperlink , the pdf is not loaded in firefox and i'm getting the following error in firefox error console
    Security Error: Content at http://172.16.3.222:8080/FMS/source/journal/ProductionEntry.jsp may not load or link to file://///172.16.2.1/copyediting/ELS/mallet.pdf
    can any one please give me the solution.

    Links and forms in HTML should point to public URL´s (with http:// or https:// protocol), not to the file system (with file://).
    If those files are not public accessible by URL, then you need to create a servlet which does the file streaming task. This example may be useful then: [http://balusc.blogspot.com/2007/07/fileservlet.html].

  • Security Error when creating a web service with Flex

    Hello comminuty.
    I'm using Flex to create a standalone application and I have to use web services to retrieve data from SAP.
    I used the bapi bapi_flight_getlist to create an associated WS that works fine (tested with the Eclipse's WS Explorer).
    In Flex Builder, I use the following code to create my web service:
         <mx:WebService
              showBusyCursor="true"
              id="service"           
              wsdl="{wsdl}"
              result="resultCreateWSHandler(event);"
              fault="faultCreateWSHandler(event);">
                <mx:operation name="FlightGetList"
                     result="resultWSHandler(event)"
                     fault="faultWSHandler(event)"></mx:operation>                    
            </mx:WebService>
    And this is the error I'm getting:
    (mx.messaging.messages::ErrorMessage)#0
      body = (null)
      clientId = "DirectHTTPChannel0"
      correlationId = "E578ED8C-EF29-44E7-8D57-57B4DB6EB613"
      destination = ""
      extendedData = (null)
      faultCode = "Channel.Security.Error"
      faultDetail = "Destination: DefaultHTTP"
      faultString = "Security error accessing url"
      headers = (Object)#1
        DSStatusCode = 0
      messageId = "6E7AC45E-418D-90CD-96AD-57B52DB1DAF4"
      rootCause = (flash.events::SecurityErrorEvent)#2
        bubbles = false
        cancelable = false
        currentTarget = (flash.net::URLLoader)#3
          bytesLoaded = 0
          bytesTotal = 0
          data = (null)
          dataFormat = "text"
        eventPhase = 2
        target = (flash.net::URLLoader)#3
        text = "Error #2048: Violation de la sécurité Sandbox : http://localhost:8300/ztest2/bin-debug/ztest2.swf ne peut pas charger de données à partir de http://XXXX:8006/sap/bc/srt/wsdl/bndg_DEB8A28C2E19EEF19C080050568D135B/wsdl11/allinone/ws_policy/document?sap-client=800."
        type = "securityError"
      timestamp = 0
      timeToLive = 0
    Translation: "Error #2048: Sandbox security violation: http:....swf cannot load data from http:...client=800"
    Would any of you have an idea about what is causing this error??
    Thanks for any help you can provide.
    Regards,
    C.

    Hi Cristina
    Did your flex application worked. i am also having same problm. cant access the BAPI from standalone flex application.
    Jay

  • Java Security Error while Launching the Application through JNLP

    Hi!,
    I have a problem in launching my Application through JNLP. It is giving the Error dialog as "Unable to lauch application" with the dialog title as "Java Security Error".
    I don't know why this problem is coming but when I have reset my profile on my system & then I tried to launch the same application & I got success.
    Can anyone suggest me what was the problem?
    Pradeep Gupta

    hi,
    usually it is the web dynpro launch system that is causing the issue, OR there is a misconfiguration in the backend like the tasks are set up with com.sap/esslea in the backend and the xml file is referencing sap.com <SWITCH>/esslea and the dynpro is showing this as not deployed.
    Regards
    Sharanya Rajagopal

  • Security Error when trying to access web service

    I have an app that connects over HTTPS to a web service on
    our internal network. The interface to the web service was created
    by using the WSDL Import function of the Flex IDE.
    I can run the app and retrieve data without a problem when I
    run from the debug-bin folder that the Flex IDE compiles to.
    However, I cannot connect to the web service from anywhere else,
    such as a different location on my own local drives, a network
    drive, or another persons machine.
    I've setup a local instance of Apache with mod_ssl so I could
    host the app under an HTTPS connection itself, which the
    documentation seemed to imply that would work. However, when I run
    the app, I get:
    [FaultEvent fault=[RPC Fault faultString="Security error
    accessing url" faultCode="Channel.Security.Error"
    faultDetail="Destination: DefaultHTTPS"] messageId=null
    type="fault" bubbles=true cancelable=true eventPhase=2]
    I am accessing the app by going to
    https://mymachine.companydomain.com/myapp.html, and the web service
    is being accessed through https://webservice.companydomain.com/.
    Anybody have any thoughts on what I should be looking at?
    I've been searching and trying things for a few days with no luck.
    Any help would be appreciated. Thanks.

    The SSL handshake works differently to a browser as it is making the connections automatically.
    The browser asks every time if you want to trust an expired certificate, and it also recommends not to. Its impractical to manually check every service call to say do you trust the certificate so the functionality doesn't exist. I doubt any integration product does this. Therefore there isn't a option to ignore the certificate if it has expired.
    This makes sence as the certificate is untrustworthy. The whole idea around SSL is trusting the site you are communicating with, all parties need to be trusted. This stops hackers from replicating their site and intercepting data.
    If the administrator of the remote site is not willing to renew the certificate, are they really interested in SSL. I suggest they expose a non SSL service.
    cheers
    James

  • Webservice - security error

    Hi All,
    We are receiving the security error provided below while invokingthe LegalReportingUnitService -http://Host:Port/finLeLegalEntitiesModel/LegalReportingUnitService?WSDL using HTTP Analyzer (Jdeveloper) or SOAP UI.
    Also we find that the web service is having OWSM Policies - Directly Attached Policy - oracle/wss11_saml_or_username_token_with_message_protection_service_policy
    Please let us know what information has to be provided apart from username/password credentials to this webservice.
    a. Error message while invoking the web service using ext port & SSL url :
    https://xxxx-fin-ext.example.com:xxxxx/finLeLegalEntitiesModel/LegalReportingUnitService?WSDL
    Error Message: 401 Unauthorized.
    Log details:
    Response Header-----------------=_Part_9_498083750.1342417354448
    Content-Type: application/xop+xml;charset=UTF-8;type="text/xml"
    Content-Transfer-Encoding: 8bit
    Content-ID: <a1759cc915eb4db6ab48a1b97d3f1386>
    <?xml version="1.0" encoding="UTF-8" ?>
    <env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/" xmlns:ns1="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd" xmlns:ns2="http://xmlns.oracle.com/apps/financials/legalEntity/legalEntities/legalReportingUnitService/types/" xmlns:ns3="http://xmlns.oracle.com/apps/financials/legalEntity/legalEntities/legalReportingUnitService/"><env:Header><ns1:Security><ns1:UsernameToken><ns1:Username>Fusion</ns1:Username><ns1:Password>welcome</ns1:Password></ns1:UsernameToken></ns1:Security></env:Header><env:Body><ns2:createLegalReportingUnit><ns2:legalReportingUnit xmlns:ns2="http://xmlns.oracle.com/apps/financials/legalEntity/legalEntities/legalReportingUnitService/types/"><ns3:PartyId xmlns:ns3="http://xmlns.oracle.com/apps/financials/legalEntity/legalEntities/legalReportingUnitService/">300000002842377</ns3:PartyId><ns3:LegalEntityId xmlns:ns3="http://xmlns.oracle.com/apps/financials/legalEntity/legalEntities/legalReportingUnitService/">300000002842369</ns3:LegalEntityId><ns3:GeographyId xmlns:ns3="http://xmlns.oracle.com/apps/financials/legalEntity/legalEntities/legalReportingUnitService/">300000000225396</ns3:GeographyId><ns3:Name xmlns:ns3="http://xmlns.oracle.com/apps/financials/legalEntity/legalEntities/legalReportingUnitService/">Test123</ns3:Name><ns3:MainEstablishmentFlag xmlns:ns3="http://xmlns.oracle.com/apps/financials/legalEntity/legalEntities/legalReportingUnitService/">Y</ns3:MainEstablishmentFlag><ns3:MainEffectiveFrom xmlns:ns3="http://xmlns.oracle.com/apps/financials/legalEntity/legalEntities/legalReportingUnitService/">2011-07-03+05:30</ns3:MainEffectiveFrom><ns3:MainEffectiveTo xmlns:ns3="http://xmlns.oracle.com/apps/financials/legalEntity/legalEntities/legalReportingUnitService/">2012-07-16+05:30</ns3:MainEffectiveTo><ns3:EffectiveFrom xmlns:ns3="http://xmlns.oracle.com/apps/financials/legalEntity/legalEntities/legalReportingUnitService/">2012-07-16+05:30</ns3:EffectiveFrom><ns3:EffectiveTo xmlns:ns3="http://xmlns.oracle.com/apps/financials/legalEntity/legalEntities/legalReportingUnitService/">2012-07-16+05:30</ns3:EffectiveTo><ns3:ObjectVersionNumber xmlns:ns3="http://xmlns.oracle.com/apps/financials/legalEntity/legalEntities/legalReportingUnitService/">1</ns3:ObjectVersionNumber><ns3:ActivityCode xmlns:ns3="http://xmlns.oracle.com/apps/financials/legalEntity/legalEntities/legalReportingUnitService/"/><ns3:SubActivityCode xmlns:ns3="http://xmlns.oracle.com/apps/financials/legalEntity/legalEntities/legalReportingUnitService/"/><ns3:TypeOfCompany xmlns:ns3="http://xmlns.oracle.com/apps/financials/legalEntity/legalEntities/legalReportingUnitService/"/></ns2:legalReportingUnit></ns2:createLegalReportingUnit></env:Body></env:Envelope>
    ------=_Part_9_498083750.1342417354448—
    b. Error message while invoking this web service using int port –
    http://xxx-fin-int.example.com:xxxx/finLeLegalEntitiesModel/LegalReportingUnitService?WSDL
    Error Message: 500 Internal Server error.
    Log details:
    Response Header: ------=_Part_8_481967515.1342415673437
    Content-Type: application/xop+xml;charset=UTF-8;type="text/xml"
    Content-Transfer-Encoding: 8bit
    Content-ID: <f4ef59739fc64cacb9829403d3a171d5>
    <?xml version="1.0" encoding="UTF-8" ?>
    <env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/"><env:Header/><env:Body><env:Fault xmlns:ns0="http://schemas.oracle.com/owsm/policy-enforcement-2007-06"><faultcode>ns0:GenericFault</faultcode><faultstring>GenericFault : generic error</faultstring><faultactor></faultactor></env:Fault></env:Body></env:Envelope>
    ------=_Part_8_481967515.1342415673437—
    Regards,
    Ramesh

    Hi, I am using Weblogic Oracle 12c and standalone server no clusters. I have a webservice configured which is working from the Weblogic, using DemoTrust.jks I just downloaded the SOAP-UI and having issues with this, I set up the aut Tab to use Global HTTP Settings for the authorization type and added a keystore which is pointing to the DemoTrust.jks.
    When I run a test, I receive this error
    Tue Jul 31 09:40:38 PDT 2012:DEBUG:<< "<env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/"><env:Header/><env:Body><env:Fault xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd"><faultcode>wsse:InvalidSecurity</faultcode><faultstring>Error on verifying message against security policy Error code:1000</faultstring></env:Fault></env:Body></env:Envelope>"
    You wouldn't know what this is about, from what I am reading it seems I need to pass a policy to the server from the client but unsure what to configure.
    If you have any insight I would appreciate it.

Maybe you are looking for

  • How do I move a proxy/alias address from one user to another?

    We have a user that is leaving the company, we'll call her Clerk.  She has her normal email address ([email protected]), but she also uses a proxy address or alias ([email protected]).  The new user taking her place will have the same setup, her norm

  • User-Exit/Badi for F-47/F-58

    Hi All, I have a developed a custom workflow for f-47 (vendor down payment request). Now whenever the document is approved/rejected the status is stored in a custom ztable. This document is posted in f-58. My requirement is whenver the document is re

  • My music isn't in my library

    I just purchased an album off the iTunes store and it says that it has been downloaded. It is in my purchased playlist and recently added playlist but not in my library. Therefore it isn't being synced onto my iPod. Please help. Thanks, JDubz

  • Cross Docking for stock category Q (inspection stock)

    Hello everyone, My client uses cross docking in 4.7 release and recently a requirement came up where they wanna be able to cross dock stock received from production while the User Decision from QM is still pending. I have tried to walkthrough the cod

  • Printing sticky address labels

    When using Pages to print address labels on an Avery L7163 label sheet how do I fill a full sheet of 14 labels with the same address?