Register system R3, portal transaction rz70

Please helpme.
I have a problem, I need register my system r3 in the portral but I can´t
The follow is the error
Error when opening an RFC connection
ERROR: file communicate with gateway SAP ¿ Gateway SAP started.
In the potal sld I put this parameters
Sldprofilesection all--
GatewayHost (datasupplier): localhost portal
GatewayService (datasupplier): sapgw01 with 01 id instance.
Object Server (Server Settings): Ii put name instance abap.
inthe rz70 i put.
Gateway Host HOSTNAME PORTAL
Gateway service sapgw01
But the error continue.

Hi,
When registering an ABAP based system to SLD, there also needs to be an RFC connection setup on ABAP side to connect to the SAP Gateway service on the J2EE system with SLD.
Hope you have the RFC connection setup fine and working.
Can check below help on setting up ABAP systems in SLD.
Link: [http://help.sap.com/saphelp_nw70/helpdata/en/8a/361fb70681234fb7d3af841ec2383e/frameset.htm]
Thanks,
Swapna Priya.

Similar Messages

Register system r3 in the portal transaction rz70

Please helpme.
I have a problem, I need register my system r3 in the portral but I can´t
The follow is the error
Error when opening an RFC connection
ERROR: file communicate with gateway SAP ¿ Gateway SAP started.
In the potal sld I put this parameters
Sldprofilesection all--
GatewayHost (datasupplier): localhost portal
GatewayService (datasupplier): sapgw01 with 01 id instance.
Object Server (Server Settings): Ii put name instance abap.
inthe rz70 i put.
Gateway Host HOSTNAME PORTAL
Gateway service sapgw01
But the error continue.

Hi,
When registering an ABAP based system to SLD, there also needs to be an RFC connection setup on ABAP side to connect to the SAP Gateway service on the J2EE system with SLD.
Hope you have the RFC connection setup fine and working.
Can check below help on setting up ABAP systems in SLD.
Link: [http://help.sap.com/saphelp_nw70/helpdata/en/8a/361fb70681234fb7d3af841ec2383e/frameset.htm]
Thanks,
Swapna Priya.

Tech System in SLD and RZ70 in 4.6c and 4.7 systems

Hi,
We have two legacy systems R3 4.6C and R3 4.7 Systems in our landscape and we are using PI 7.1.
we are setting up configurations for IDOC communications
1) between 4.7 and PI
2) between 4.6C and PI
for registering 4.7 system in SLD, we used RZ70 transaction in 4.7, and the tech system (of type AS ABAP) got created in SLD, so we could proceed with creation of Business system for one of its abap client.
but when we tried the same thing in 4.6c system, when we tried executing RZ70 in 4.6C system, it says "Transaction RZ70 does not exist". Since 4.6C does not support rz70, how can we register the corresponding Tech System in PI SLD.
Thanks in advance.

Hi
The ABAP-based SLD data supplier (transaction RZ70) is available for all SAP systems as of SAP Basis release 4.0B.
For details see here: http://help.sap.com/saphelp_nwpi71/helpdata/EN/11/0dfe55e0c8fc4e910706a47ca6859b/content.htm
Are you sure you typed in transaction code correctly?
If everything does not help open a CSN at SMP and in the meantime - as a workaround - you can maintain the SLD manually for that system.
Regards,
Volker

AS-ABAP (BI) system registration in SLD RZ70 Error

Hi guys, I'm following the SAP note 983156 - BI configuration w. Template Installer and I'm in the step in order to establish communication between my BW IDES and Portal.
""Checking the AS-ABAP (BI) system registration in SLD""
the note says:
"When configuring the Webdynpro Jco destination connectivity the AS-ABAP (BI) system must be configured in the SLD."
Procedure:
Logon to the SLD: http://<host>:<port>/sld. (Your configured SLD (central or local SLD))
Please check in Home -> Technical Systems -> select type ABAP. This
should have configuration of your ABAP (BI) system.
If it is missing, logon to your ABAP (BI) system -> goto transaction RZ70. Fill in the SLD bridge: gateway info -> Activate -> Start data collection."
Well, when I'm in SDL Home > Technical systems, I have nothing there, so I started to enable the SDL Bridge in RZ70 and after running it, it gives me the error:
0: ibm_IAM_00                                : Collection of SLD data finished
0: ibm_IAM_00                                : Data collected successfully
0: ibm_IAM_00                                : RFC data prepared
0: ibm_IAM_00                                : Used RFC destination: IBM_PORTAL_IAN
0: ibm_IAM_00                                : RFC call failed: JCO.Server could not find server function 'SET_SLD_DATA'
0: ibm_IAM_00                                : Existing periodic jobs removed. Number: 1
0: ibm_IAM_00                                : Program scheduled: 20100602 000100
1: ibm_IAM_00                                : Event-controlled job already exists; scheduling not necessary
I looked through other posts, I eliminated SLD_NUC and SLD_UC from JAVA Visual Administrator, but still, the error persists.
Any ideas?

Hi Kuatroka,
In relation to the following error received: "JCO.Server could not find server function SET_SLD_DATA"
1) RZ70 could not find gateway - check gateway defined in RZ70 is up and running in host and SLD home page ->Administration -> Data Supplier Bridge and SLD gateway host is reachable from ABAP system host.
2) Be aware SLD/J2EE does not install a gateway as standard - you must either install a dedicated gateway instance using Presentation CD/DVD or you must use a local ABAP gateway (normally local ABAP stack if SLD runs on J2EE ADDIN) or ensure the definitions are correct for any other ABAP systems gateway you choose to use
3) Check the definitions in SLD -> Administration ->Data Supplier Bridge match the definitions in RZ70 - try also FQDN. Ensure these are the same!
4) If you are operating multiple SLD see SAP note 700127
5) Ensure you have not manually created entries for SLD_UC and SLD_NUC in the JCO RFC provider of the visual administrator. The SLD has its own internal JCO provider so there should be no entries in that of the Engine.
I am not sure of your SP levels, but this may also apply: if you have a gateway service on the defined host, the definitions
match between RZ70 and SLD, the gateway is running then it could be a problem with RZ70 - implement notes 906454 and 926089 and 907729.
I hope this information helps.
All the best,
Cristiano

Problem while creating Logical System Connecting Portal to ECC (Backend)...

Hi
- I am trying to connect portal to ABAP so that from portal's iView i could access any ABAP T-Code (e.g. SE37).
- Secondly, just wanted to let you know that i am not implementing SSO.
- I used iView's SAP GUI Type = SAP GUI for HTML.
I made following 3 tests, out of which ITS connection is failed. and while previewing my iView i m not able to connect with ABAP and giving error: "The URL http://192.168.1.104:8001/sap/bc/gui/sap/its/webgui was not called due to an error."
Could u pls guide me what to do.... And i mentioned everything at the bottom in detail.
Thanks & looking forwarded for your replies.....
SAP Web AS Connection (Successful)
Test Details:
The test consists of the following steps:
1. Checks the validity of system ID in the system object.
2. Checks if the system can be retrieved from the PCD.
3. Check whether a SAP system is defined in the system object
4. Validate the following parameters: WAS protocol; WAS host name
5. Checks if the host name of the server can be resolved.
6. Pings the server to see if it is alive.
7. Pings the WAS ping service; works only if the service is activated on the ABAP WAS.
8. Checks HTTP/S connectivity to the defined back-end application
Results
1. The system ID is valid
2. The system was retrieved.
3. The system object represents an SAP system
4. The following parameters are valid: Web AS Protocol (http) Web AS Host Name (192.168.1.104:8001)
5. The host name 192.168.1.104 was resolved successfully.
6. The server 192.168.1.104 was pinged successfully.
7. The Web AS ping service http://192.168.1.104:8001/sap/bc/ping was pinged successfully.
8. An HTTP/S connection to http://192.168.1.104:8001/sap/bc/bsp/sap was obtained successfully.
ITS Connection (Failed)
Test Details:
The test consists of the following steps:
1. Checks the validity of system ID in the system object.
2. Checks if the system can be retrieved from the PCD.
3. Check whether the system object has a valid system alias
4. Check whether a SAP system is defined in the system object
5. Validate the following parameters: ITS protocol; ITS host name
6. Checks if the host name of the server can be resolved.
7. Pings the server to see if it is alive.
8. Checks HTTP/S connectivity to the defined back-end application
Results
1. The system ID is valid
2. The system was retrieved.
3. Retrieval of the default alias was successful
4. The system object represents an SAP system
5. The following parameters are valid: ITS Protocol (http) ITS Host Name (192.168.1.104:8001)
6. The host name 192.168.1.104 was resolved successfully.
7. The server 192.168.1.104 was pinged successfully.
8. User mapping is valid
9. An HTTP/S connection to http://192.168.1.104:8001/sap/bc/gui/sap/its/webgui/ was not obtained successfully; this might be due to a closed port on the Firewall.
Test Connection with Connector (Successful)
Test Details:
The test consists of the following steps:
1. Retrieve the default alias of the system
2. Check the connection to the backend application using the connector defined in this system object
Results
1. Retrieval of default alias successful.
2. Connection successful.
I am getting following error while Previeiwng iView.
Error when processing your request
What has happened?
The URL http://192.168.1.104:8001/sap/bc/gui/sap/its/webgui was not called due to an error.
Note
The following error text was processed in the system D10 : Template interpretation cancelled, syntax error.
The error occurred on the application server eccdcs1s_D10_01 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
      SYSTEM-EXIT of program SAPLSFUNCTION_BUILDER
      Function: RS_FUNCTION_INITIAL_SCREEN of program SAPLSFUNCTION_BUILDER
      Method: IF_WB_PROGRAM~PROCESS_WB_REQUEST of program CL_FB_FUNCTION_INITIAL_SCREEN=CP
      Method: DO_THE_NAVIGATION of program CL_WB_NAVIGATOR===============CP
      Method: DO_THE_NAVIGATION of program CL_WB_NAVIGATOR_VIS_AS_DYNPRO=CP
      Method: PROCESS_WB_REQUEST of program CL_WB_MANAGER=================CP
      Method: PROCESS_REQUEST_QUEUE of program CL_WB_MANAGER=================CP
      Method: IF_WB_MANAGER~SET_WORKSPACE of program CL_WB_MANAGER=================CP
      Method: START_INTERNAL of program CL_WB_STARTUP=================CP
      Module: MANAGER_START of program SAPLWB_MANAGER
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the   system D10 in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server eccdcs1s_D10_01 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 0 in transaction ST11 on the application server eccdcs1s_D10_01 . In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-http -c: 001 -u: SAPUSER -l: E -s: D10 -i: eccdcs1s_D10_01 -w: 0 -d: 20090924 -t: 202054 -v: RABAX_STATE -e: ITS_CANT_LOAD_INCLUDE
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team
Edited by: Harpal Singh on Sep 24, 2009 4:55 PM

Hi,
> Goto SE80, Select "Internet Service". Give service name as WEBGUI and enter. Right click on the WEBGUI and select Publish - > Complete service.
Source : http://wiki.sdn.sap.com/wiki/display/BI/BiAdminCockpit+Issues
Or call transaction SIAC_PUBLISH_ALL_INTERNAL to publish all services.
[Note 964521 - Short dump ITS_CANT_LOAD_INCLUDE w/ call of SAP GUI for HTML|https://service.sap.com/sap/support/notes/964521].
Regards,
Pierre

Portal Transaction iView not opening in browser but its open in R/3 screen

Hi
I have 2 senario.
First Scenario:
I login only into the portal and not login into R/3. I could access the portal transaction iview in the new broser portal window. And this is the expected behaviour.
second senario
I login into Portal as well as R/3 through SAP logon Pad (SAP GUI).
Now if I access Transaction Iview through portal , this transaction Iview is opened in R/3 side window not in portal browser window .And also same time we can see only new blank portal window iopen n portal side.
My question is that whichever transaction iView we access through portal we want to see that transaction iView in portal browser window like in first senario not in R/3 window.
Please help me to resolve this problem
Regards
Ruturaj

Hi Shanti
Thanks for replying.
The problem is that when our user trying to do same things in our system with his credentials means UID and PWD its working fine.But when he do the same things in his system with his credentials problem occured as per the senario 2.
This problem is not only that user but also whole their team member.
Regardfs
Ruturaj
Edited by: Ruturaj Inamdar on Sep 15, 2011 9:20 AM
Edited by: Ruturaj Inamdar on Sep 15, 2011 9:25 AM

Cannot drop the table because it does not exist in the system catalog. Transaction context in use by another session

Hi Every one,
An error has occurred during report processing. (rsProcessingAborted)
Get Online Help
Query execution failed for data set 'NonFinTran'. (rsErrorExecutingCommand)
Get Online Help
Cannot drop the table '#NonFinTran', because it does not exist in the system catalog. Cannot drop the table '#MultipleNonFinTran',
because it does not exist in the system catalog. Transaction context in use by another session.
NOTE: NonFinTran &
MultipleNonFinTran are
the Temp table in my storedPoc.
Please any help me to solve this issue.
Thanks & Regards,
Anil Kumar
Anil Kumar

Hi Harsh,
Below is my Stored Proc
SELECT @ServerName=datasource from master.dbo.sysservers WHERE catalog='Voyager'
SELECT @ServerName3=datasource from master.dbo.sysservers WHERE catalog='AuditLog'
SELECT @ServerName2=datasource from master.dbo.sysservers WHERE catalog='Portal'
IF @ServerName IS NOT NULL SET @ServerName='[' + @ServerName + '].' ELSE SET @ServerName=''
IF @ServerName3 IS NOT NULL SET @ServerName3='[' + @ServerName3 + '].' ELSE SET @ServerName3=''
IF @ServerName2 IS NOT NULL SET @ServerName2='[' + @ServerName2 + '].' ELSE SET @ServerName2=''
IF Exists(Select * From tempdb.dbo.SysObjects Where Name Like '#NonFinTran%')
DROP TABLE #NonFinTran
IF Exists(Select * From tempdb.dbo.SysObjects Where Name Like '#MultipleNonFinTran%')
DROP TABLE #MultipleNonFinTran
CREATE TABLE #NonFinTran (FirstName VARCHAR(40), TaxId VARCHAR(40), TrxID VARCHAR(40), Status VARCHAR(255), Field1 VARCHAR(255), Field2 VARCHAR(255),
Field3 VARCHAR(255), Field4 VARCHAR(255), Field5 VARCHAR(255), Field6 VARCHAR(255), DateTime DATETIME,
BranchID CHAR(3), BankID CHAR(1), FromAccountID VARCHAR(255), FromAccountType VARCHAR(255))
CREATE TABLE #MultipleNonFinTran (FirstName VARCHAR(40), TaxId VARCHAR(40), TrxID VARCHAR(40), Status VARCHAR(255), Field1 VARCHAR(255), Field2 VARCHAR(255),
Field3 VARCHAR(255), Field4 VARCHAR(255), Field5 VARCHAR(255), Field6 VARCHAR(255), DateTime DATETIME,
BranchID CHAR(3), BankID CHAR(1), FromAccountID VARCHAR(255), FromAccountType VARCHAR(255))
INSERT #NonFinTran
EXEC('SELECT FirstName, TaxID,
TrxID, Status, TrxField1, TrxField2, TrxField3, TrxField4, TrxField5, TrxField6, DateTime, '''', '''', '''', ''''
FROM ' + @ServerName3 + 'AuditLog.dbo.CCAuditLogEntryView AS Audit, ' + @ServerName + 'Voyager.dbo.CCUser AS CCUser
WHERE CCUser.UserID = Audit.UserID
AND Audit.Succeeded = 1
AND Audit.TrxID IN (''ChangeBillPayDefaultAccountEdit'',''ChangeExpiryUserPassword'',''ChangePasswordEdit'',
''ChangeUserPassword'',''ManageAddressMaint'',''ManageContactMaint'',''ManageSecretQuestionAnswerEdit'',
''ManageTransLimitMaint'',''OtherBankAccountMaintAdd'',''OtherBankAccountMaintDelete'',''OtherBankAccountMaintEdit'',
''WithinAmBankAccountMaintAdd'',''WithinAmBankAccountMaintDelete'',''WithinAmBankAccountMaintEdit'',
''SetAccountMaskPreferenceAudit'',''ChangeLoginIdAudit'')
AND DATEDIFF(DAY, CONVERT(DATETIME, CONVERT(VARCHAR(10), ''' + @StartDate + '''), 103), Audit.DateTime) >= 0
AND DATEDIFF(DAY, CONVERT(DATETIME, CONVERT(VARCHAR(10), ''' + @EndDate + '''), 103), Audit.DateTime) <= 0 ')
INSERT #MultipleNonFinTran
EXEC('SELECT DISTINCT FirstName, TaxID,
TrxID, Status, TrxField1, TrxField2, TrxField3, TrxField4, TrxField5, TrxField6, Audit.DateTime as AuditDateTime,
(SELECT DISTINCT SUBSTRING(A.BranchCode,3,3) FROM ' + @ServerName + 'AuditLog.dbo.CCAuditLogEntryView X INNER JOIN ' + @ServerName + 'Voyager.dbo.CCuser U
ON X.UserId = U.UserId INNER JOIN ' + @ServerName + 'Voyager.dbo.AMHZ_CustomerProfile P ON P.EnrolId = U.TAXID
INNER JOIN ' + @ServerName + 'Voyager.dbo.AMHZ_AccountListing A ON A.CIFNO = P.CIFNO
WHERE X.UserId = Audit.UserId AND A.AccountNo = SUBSTRING(Audit.TrxField1,11,16) AND P.CIFNO = A.CIFNO
AND (SUBSTRING(A.BranchCode,3,3) <> NULL OR SUBSTRING(A.BranchCode,3,3) <> '''')
AND CHARINDEX(''AccountID='', Audit.TrxField1, 1) > 0),
SUBSTRING(TrxField1,14,1), CASE WHEN CHARINDEX(''AccountID='', TrxField1, 1) > 0 THEN
SUBSTRING(TrxField1,11,16) ELSE '''' END, CASE WHEN CHARINDEX(''AccountType='', TrxField2, 1) > 0 THEN SUBSTRING(TrxField2,13,3) ELSE '''' END
FROM ' + @ServerName3 + 'AuditLog.dbo.CCAuditLogEntryView AS Audit, ' + @ServerName + 'Voyager.dbo.CCUser AS CCUser
WHERE CCUser.UserID = Audit.UserID
AND Audit.Succeeded = 1
AND Audit.TrxID IN (''SetAccountAttributesAudit'',''SetAccountFriendlyNameAudit'',
''AccountProfileMaintULDelete'',''AccountProfileMaintLHAAdd'',''AccountProfileMaintLSCAdd'')
AND DATEDIFF(DAY, CONVERT(DATETIME, CONVERT(VARCHAR(10), ''' + @StartDate + '''), 103), Audit.DateTime) >= 0
AND DATEDIFF(DAY, CONVERT(DATETIME, CONVERT(VARCHAR(10), ''' + @EndDate + '''), 103), Audit.DateTime) <= 0 ')
SET @stmt = '
SELECT * FROM
SELECT BranchName,
CASE WHEN SUBSTRING(FromAccountID,1,6) IN (''519901'',''559409'') THEN ''DC''
ELSE
CASE FromAccountType WHEN ''01'' THEN ''SA '' WHEN ''02'' THEN ''CA '' WHEN ''03'' THEN ''FD ''
WHEN ''SA'' THEN ''SA '' WHEN ''CA'' THEN ''CA '' WHEN ''FD'' THEN ''FD '' ELSE FromAccountType + '' ''
END
END +
case when Len(FromAccountID) =16 Then
CASE FromAccountType WHEN ''VC'' THEN
SUBSTRING(FromAccountID,1,6)+''******''+SUBSTRING(FromAccountID,13,4)
WHEN ''MC'' THEN SUBSTRING(FromAccountID,1,6)+''******''+SUBSTRING(FromAccountID,13,4) END
when Len(FromAccountID) =15 Then
CASE FromAccountType WHEN ''VC'' THEN
SUBSTRING(FromAccountID,1,6)+''******''+SUBSTRING(FromAccountID,13,3)
WHEN ''MC'' THEN SUBSTRING(FromAccountID,1,6)+''******''+SUBSTRING(FromAccountID,13,3) END
ELSE FromAccountID
ENd
AS FromAcctNo,
CASE TrxId
WHEN ''AccountProfileMaintLHAAdd'' THEN ''Link Account/Card''
WHEN ''AccountProfileMaintLSCAdd'' THEN ''Link Account/Card''
WHEN ''APMFamilyFirstAdd'' THEN ''Link Family First Account''
WHEN ''AccountProfileMaintULDelete'' THEN ''Unlink Account/Card''
WHEN ''BalInqFD'' THEN CASE WHEN Field3 IN (''APMLink=SUCCESS'') THEN ''APMLink Success'' ELSE ''Fixed Deposit Balance Inquiry'' END
WHEN ''BalInqCASA'' THEN CASE WHEN Field3 IN (''APMLink=SUCCESS'') THEN ''APMLink Success'' ELSE
   CASE WHEN FromAccountType IN (''SA'',''01'') THEN ''Savings Account Balance Inquiry''
   ELSE ''Current Account Balance Inquiry''
   END
  END
WHEN ''StopCheck'' THEN ''Stop Cheque Request''
WHEN ''CheckReorder'' THEN ''Order Your Cheque''
WHEN ''CheckInquiry'' THEN ''Cheque Inquiry''
WHEN ''TransHistFD'' THEN ''Fixed Deposit Transaction History''
WHEN ''TransHistCASA'' THEN
CASE WHEN FromAccountType IN (''SA'',''01'') THEN ''Savings Account Transaction History'' ELSE ''Current Account Transaction History'' END
WHEN ''StmtInqCC'' THEN
CASE WHEN FromAccountType IN (''DR'',''03'') THEN ''Debit Card Statement Inquiry'' ELSE ''Credit Card Statement Inquiry'' END
WHEN ''StmtInqDA'' THEN
CASE WHEN FromAccountType IN (''SA'',''01'') THEN ''Savings Account Statement Inquiry'' ELSE ''Current Account Statement Inquiry'' END
WHEN ''StmtReq'' THEN ''Printed Statement Request''
WHEN ''StmtInqIAMSTAR'' THEN ''E-AMSTAR Statement Inquiry''
WHEN ''Repayment/Transfer Inquiry'' THEN ''Repayment/Transfer Inquiry''
WHEN ''Account Inquiry'' THEN ''Account Inquiry''
WHEN ''Payment Inquiry'' THEN ''Payment Inquiry''
END AS TransType,
FirstName AS CustomerName,
TaxId, CONVERT(VARCHAR, DateTime, 103) AS Date, CONVERT(VARCHAR, DateTime, 108) AS Time
FROM #NonFinTran, ' + @ServerName3 + 'Portal.dbo.TB_Branch AS TB_Branch
WHERE
BranchId = TB_Branch.BranchCode
AND (TB_Branch.InstCode IN (''00001'', ''00003'',''001'',''002''))
AND (FromAccountType IN (''SA'', ''CA'', ''FD'', ''01'', ''02'', ''03'')))'
EXEC (@stmt)
IF Exists(Select * From tempdb.dbo.SysObjects Where Name Like '#NonFinTran%')
DROP TABLE #NonFinTran
IF Exists(Select * From tempdb.dbo.SysObjects Where Name Like '#MultipleNonFinTran%')
DROP TABLE #MultipleNonFinTran
Anil Kumar

Define system on portal J2ee server in SYSTEM CONFIG -- SLD error

Hi,
Can , any body tell me how to create a system on portal J2EE server in which bussiness package has implemented.
WAS properties for the system as
WAS host name:<j2ee name> : <port>
WAS Path:/ webdynpro/dispatcher/
wAS protocol :HTTP
I have tried to create system in System admin--> System configuration --.>SLD .But it is showing following error
SAP Web AS Connection
Test Details:
The test consists of the following steps:
1. Checks the validity of system ID in the system object.
2. Checks if the system can be retrieved from the PCD.
3. Check whether a SAP system is defined in the system object
4. Validate the following parameters: WAS protocol; WAS host name
5. Checks if the host name of the server can be resolved.
6. Pings the WAS ping service; works only if the service is activated on the ABAP WAS.
7. Checks HTTP/S connectivity to the defined back-end application
Results
1. The system ID is valid
2. The system was retrieved.
3. The system object represents an SAP system
4. The following parameters are valid: Web AS Protocol (http) Web AS Host Name (XX.XX.XX.XX:50000)
5. The host name XX.XX.XX.XX was resolved successfully.
6. The Web AS ping service http://XX.XX.XX:50000/sap/bc/ping was not pinged successfully. If the ping service is not activated on the Web AS, you can try to call the ping service manually.
7. An HTTP/S connection to http://xx.xx.xx:50000/webdynpro/dispatcher/ was not obtained successfully; this might be due to a closed port on the Firewall.
Why it is checking R/3 connection setup like sap/bc/ping and other connection . Iam creating WAS connection for java only.Even iam not define any related properties on this system.
Regards,
Eswar.

Hi,
in your ABAP system, open transaction SICF, F8, and go activating the required services :
Default Host > sap > bc > ping. Right click on it and choose "Activate".
This will normally solve your point 6 error.
For point 7 I might think of a port error, can you tell us if your system is load balanced ? if yes, your port defined in your system in the PCD in the connector category hase to be 3600. If not load balanced : 3200.
If implementing SSO, also check in the RZ10 transaction that your default profile contains those parameters :
login/create_sso2_ticket = 2
login/accept_sso2_ticket = 1
icm/host_name_full = server_host_name.domain.com.
Fabien.

Could not connect to backend system through portal via Web Dispatcher

Web dispatcher redirecting problem
Dear Experts,
I have implemented a scenario which comprised of customizing that is developed in Portal EP7. What customizing does is getting report from backend system (ERP 6.0)
According to the needs for reaching the portal from internet I configured the SAP Web Dispatcher in the environment as you may see its contents below.
The problem is when I run the customizing in portal system then it requires connecting to backend system (ECC 6.0) to get the data (report). But from this point on web browser comes to a blank page, could not view the data that is from backend system via portal. Because in the time when it tries to retrieve data in backend system, on the left bottom of the explorer the indicator shows internet address that system uses connecting to the backend system as local network address of the backend system which is not known in internet therefore I get blank page.
The question is how to configure the web dispatcher in a way that both portal and backend systems could be reachable from internet?
Contents of profile file of Web Dispatcher as;
SAPSYSTEMNAME = WDP
SAPGLOBALHOST = portald
SAPSYSTEM = 02
INSTANCE_NAME = W02
DIR_CT_RUN = $(DIR_EXE_ROOT)\$(OS_UNICODE)\NTAMD64
DIR_EXECUTABLE = $(DIR_CT_RUN)
Accesssability of Message Server
rdisp/mshost = portald
ms/http_port = 8101
Configuration for medium scenario
icm/max_conn = 500
icm/max_sockets = 1024
icm/req_queue_len = 500
icm/min_threads = 10
icm/max_threads = 50
mpi/total_size_MB = 80
SAP Web Dispatcher Ports
#icm/server_port_0 = PROT=HTTP,PORT=81$$
SAP Web Dispatcher Ports
icm/server_port_0 = PROT=HTTP,PORT=60000
icm/HTTP/redirect_0 = PREFIX=/, TO=/irj/index.html
icm/HTTP/redirect_0 = PORT=50000
#maximum number of concurrent connections to one server
wdisp/HTTP/max_pooled_con = 500
wdisp/HTTPS/max_pooled_con = 500
Configuration for medium scenario
icm/max_conn = 500
icm/max_sockets = 1024
icm/req_queue_len = 500
icm/min_threads = 10
icm/max_threads = 50
mpi/total_size_MB = 80
Regards,
Ali Taner

Hi,
To resovle this you must have registered FQDN for your backend system as well. When you call the report from Portal using internet it should call that FQDN of your backend system then DNS will resolve this & you will get the expected page. This way only you can resolve this issue.
Thanks,
Sachin Sable

Eror Creating New Technical System in portal(SLD)

Hi creating SLD through Techinal system(in portal).When i click to register Message server to enter message server name and port ,it is displaying a below error:-
Please help me out
Error Summary
While processing the current request, an exception occured which could not be handled by the application or the framework.
If the information contained on this page doesn't help you to find and correct the cause of the problem, please contact your system administrator. To facilitate analysis of the problem, keep a copy of this error page. Hint: Most browsers allow to select all content, copy it and then paste it into an empty document (e.g. email or simple text file).
Root Cause
The initial exception that caused the request to fail, was:
   com.sap.tc.webdynpro.progmodel.context.ContextException: Node(TechnicalSystemDetailView.ABAPSystemDetail.MessageServer.LogonGroups): cannot bind or add elements because the node has no valid parent
    at com.sap.tc.webdynpro.progmodel.context.Node.prepareAddElement(Node.java:656)
    at com.sap.tc.webdynpro.progmodel.context.Node.addElement(Node.java:635)
    at com.sap.sld.wd.technicalsystem.TechnicalSystemDetailView.onActionNewLogonGroup(TechnicalSystemDetailView.java:616)
    at com.sap.sld.wd.technicalsystem.wdp.InternalTechnicalSystemDetailView.wdInvokeEventHandler(InternalTechnicalSystemDetailView.java:974)
    at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
    ... 28 more
See full exception chain for details.
System Environment
Client
Web Dynpro Client Type     HTML Client
User agent     Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.1; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; MS-RTC LM 8; InfoPath.3)
Version     null
DOM version     null
Client Type     msie7
Client Type Profile     ie6
ActiveX     enabled
Cookies     enabled
Frames     enabled
Java Applets     enabled
JavaScript     enabled
Tables     enabled
VB Script     enabled
Server
Web Dynpro Runtime     Vendor: SAP, build ID: 7.0106.20091119084951.0000 (release=NW701_06_REL, buildtime=2010-01-06:15:21:34[UTC], changelist=75637, host=pwdfm246), build date: Mon Jan 10 02:17:55 SGT 2011
J2EE Engine     7.01 PatchLevel 75592.
Java VM     IBM J9 VM, version:2.3, vendor: IBM Corporation
Operating system     AIX, version: 6.1, architecture: ppc64
Session & Other
Session Locale     en_US
Time of Failure     Wed Feb 23 16:53:12 SGT 2011 (Java Time: 1298451192938)
Web Dynpro Code Generation Infos
sap.com/tcsldwd~main
SapDictionaryGenerationCore     7.0103.20081105084127.0000 (release=NW701_03_REL, buildtime=2008-12-07:13:07:33[UTC], changelist=51195, host=PWDFM246.wdf.sap.corp)
SapDictionaryGenerationTemplates     7.0103.20081105084127.0000 (release=NW701_03_REL, buildtime=2008-12-07:13:07:39[UTC], changelist=51195, host=PWDFM246.wdf.sap.corp)
SapGenerationFrameworkCore     7.0103.20081105084147.0000 (release=NW701_03_REL, buildtime=2008-12-07:12:57:57[UTC], changelist=51200, host=PWDFM246.wdf.sap.corp)
SapIdeWebDynproCheckLayer     7.0103.20081105084705.0000 (release=NW701_03_REL, buildtime=2008-12-07:13:12:47[UTC], changelist=51248, host=PWDFM246.wdf.sap.corp)
SapMetamodelCommon     7.0103.20081105084336.0000 (release=NW701_03_REL, buildtime=2008-12-07:12:58:37[UTC], changelist=51222, host=PWDFM246.wdf.sap.corp)
SapMetamodelCore     7.0103.20081105084336.0000 (release=NW701_03_REL, buildtime=2008-12-07:12:58:33[UTC], changelist=51222, host=PWDFM246.wdf.sap.corp)
SapMetamodelDictionary     7.0103.20081105084131.0000 (release=NW701_03_REL, buildtime=2008-12-07:13:05:17[UTC], changelist=51196, host=PWDFM246.wdf.sap.corp)
SapMetamodelWebDynpro     7.0103.20081105084716.0000 (release=NW701_03_REL, buildtime=2008-12-07:13:09:57[UTC], changelist=51249, host=PWDFM246.wdf.sap.corp)
SapWebDynproGenerationCTemplates     7.0103.20081111115141.0000 (release=NW701_03_REL, buildtime=2008-12-07:13:20:57[UTC], changelist=51958, host=pwdfm246)
SapWebDynproGenerationCore     7.0103.20081105084705.0000 (release=NW701_03_REL, buildtime=2008-12-07:13:12:51[UTC], changelist=51248, host=PWDFM246.wdf.sap.corp)
SapWebDynproGenerationTemplates     7.0103.20081111115141.0000 (release=NW701_03_REL, buildtime=2008-12-07:13:20:57[UTC], changelist=51958, host=pwdfm246)
sap.com/tcsldwd~landscape
SapDictionaryGenerationCore     7.0103.20081105084127.0000 (release=NW701_03_REL, buildtime=2008-12-07:13:07:33[UTC], changelist=51195, host=PWDFM246.wdf.sap.corp)
SapDictionaryGenerationTemplates     7.0103.20081105084127.0000 (release=NW701_03_REL, buildtime=2008-12-07:13:07:39[UTC], changelist=51195, host=PWDFM246.wdf.sap.corp)
SapGenerationFrameworkCore     7.0103.20081105084147.0000 (release=NW701_03_REL, buildtime=2008-12-07:12:57:57[UTC], changelist=51200, host=PWDFM246.wdf.sap.corp)
SapIdeWebDynproCheckLayer     7.0103.20081105084705.0000 (release=NW701_03_REL, buildtime=2008-12-07:13:12:47[UTC], changelist=51248, host=PWDFM246.wdf.sap.corp)
SapMetamodelCommon     7.0103.20081105084336.0000 (release=NW701_03_REL, buildtime=2008-12-07:12:58:37[UTC], changelist=51222, host=PWDFM246.wdf.sap.corp)
SapMetamodelCore     7.0103.20081105084336.0000 (release=NW701_03_REL, buildtime=2008-12-07:12:58:33[UTC], changelist=51222, host=PWDFM246.wdf.sap.corp)
SapMetamodelDictionary     7.0103.20081105084131.0000 (release=NW701_03_REL, buildtime=2008-12-07:13:05:17[UTC], changelist=51196, host=PWDFM246.wdf.sap.corp)
SapMetamodelWebDynpro     7.0103.20081105084716.0000 (release=NW701_03_REL, buildtime=2008-12-07:13:09:57[UTC], changelist=51249, host=PWDFM246.wdf.sap.corp)
SapWebDynproGenerationCTemplates     7.0103.20081111115141.0000 (release=NW701_03_REL, buildtime=2008-12-07:13:20:57[UTC], changelist=51958, host=pwdfm246)
SapWebDynproGenerationCore     7.0103.20081105084705.0000 (release=NW701_03_REL, buildtime=2008-12-07:13:12:51[UTC], changelist=51248, host=PWDFM246.wdf.sap.corp)
SapWebDynproGenerationTemplates     7.0103.20081111115141.0000 (release=NW701_03_REL, buildtime=2008-12-07:13:20:57[UTC], changelist=51958, host=pwdfm246)
sap.com/tcsldwd~technicalsystem
SapDictionaryGenerationCore     7.0103.20081105084127.0000 (release=NW701_03_REL, buildtime=2008-12-07:13:07:33[UTC], changelist=51195, host=PWDFM246.wdf.sap.corp)
SapDictionaryGenerationTemplates     7.0103.20081105084127.0000 (release=NW701_03_REL, buildtime=2008-12-07:13:07:39[UTC], changelist=51195, host=PWDFM246.wdf.sap.corp)

Will suggest opening an OSS message.
Nikhil

Error while creating a system in portal

Hi,
Iam trying to create a technical system(SAP System with Load Balancing) in the portal.When i try to test the connections im getting the following error:
The WAS ping service (http://hostname:portnumber/sap/bc/ping) was not pinged successfully. If the ping service is not activated on the WAS, you can try to call the ping service manually.
Can anyone please tell me how to resolve this?
Please suggest.
Regards,
Padmalatha.K

Hi,
Pls check out these links on SLD-
Steps to configure R/3 system to Portal implementation
Configuration Guide for R/3 in SLD as backend system
Configuring SLD in Sneak Preview SAP NetWeaver '04 Sneak
/community [original link is broken]
threadID=484726&tstart=0
Regards
Lekha

Error while trying to open an added backend system in portal

Hi All,
I need one help.
I have added our Backend SAP SRM system in the Enterprise portal and it worked good.
But now if I try to open the added SRM system in the below path
System Administration à System Configuration à System Landscape -> portal contents -> system backends -> MY SRM(added system)
I am facing the error page cannot be displayed error as below
The page cannot be displayed
Explanation: There is a problem with the page you are trying to reach and it cannot be displayed.
Try the following:
u2022     Refresh page: Search for the page again by clicking the Refresh button. The timeout may have occurred due to Internet congestion.
u2022     Check spelling: Check that you typed the Web page address correctly. The address may have been mistyped.
u2022     Access from a link: If there is a link to the page you are looking for, try accessing the page from that link.
Technical Information (for support personnel)
u2022     Error Code: 500 Internal Server Error. The request was rejected by the HTTP filter. Contact the server administrator. (12217)
Please help me to solve it, Thanks a advance.
Thanks,
Senthil

Hi,
Are you using any webdispatcher or some proxy? Is there any URL filter configured in between?
If yes then I think you have to allow these pages.
Regards,
Vamshi.

Error while loading the custom portal transaction

Hi,
After the recent ITS Patches applied, our custom portal transactions are not work fine.
Some of the fields are displaced from their position and printing in abrupt position of the screen.
Transaction like address change, direct doposit screen... their fields like country key, bank key are not printing in the exact position in the screen.
This problem started only after appling the recently released ITS patches.
It's highly URGENT.. please help.
Saurabh Garg

Resolved

For one Urgent Change during performing the Approval(chnging the status to 'To be Tested') system does not recognize any changes using the CTS WBS BOM in the development system. The transaction is therefore incorrect or the status was reset by the system.

For one Urgent Change while performing the one of the Approval before changing the status to 'To Be Tested'
We are getting below error.
The system does not recognize any changes using the CTS WBS BOM in the development system. The transaction is therefore incorrect or the status was reset by the system.
COuld anyone please help us to know, How it can be resolved?
We also have this below error.
System Response
If the PPF action is a condition check, the condition is initially considered as not met, and leads to another warning, an error message, or status reset, depending on the configuration.
If the PPF action is the execution of a task in the task list, and the exception is critical, there is another error message in the document.
Procedure
The condition cannot be met until the cause is removed. Analyze all messages in the transaction application log.
Procedure for System Administration
Analyze any other messages in the task list application log, and the entries for the object /TMWFLOW/CMSCV
Additional Information:
System cancel RFC destination SM_UK4CLNT005_TRUSTED, Call TR_READ_COMM:
No authorization to log on as a trusted system (Tr usted RC=0).
/TMWFLOW/TU_GET_REQUEST_REMOTE:E:/TMWFLOW/TRACK_N:107
For above error Table /TMWFLOW/REP_DATA_FLOWwas refreshed as well but still the same error.

If you are in Test System, you can use function module AA_AFABER_DELETE to totally delete the depreciation area (tcode SE37, specify chart of depreciation and depreciation area), After that recreate your depreciation area and run AFBN. But before you do that, have you created a retirement transaction type that limits the posting on your new depreciation area? If not create one.
Hope this helps.
Thanks!
Jhero

Steps to configure R/3 system to Portal implementation

Hi
Please provide steps to configure R/3 system to Portal implementation
when i m opening standard iview in ESS in portal i m getting following runtime error.
com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: Failed to resolve JCO destination name 'SAP_R3_SelfServiceGenerics_MetaData' in the SLD. No such JCO destination is defined in the SLD.
Please help
Thanks

Hello Bhupinder Singh,
To use ESS/MSS services in Portal follow the following Steps
Maintaining jCo Connections
Use
jCo connections are used in iViews to connect directly to a backend. They are delivered with the portal content and must be activated (configured to access a specific system).
jCo connections have two parts: one with <jCo name>, and the other with suffix <jCo Name>_MetaData. The first one transfers user-specific data within the scenario; the other transfers only the needed metadata. For the jCo with name <jCo name>, SAP Logon Ticket is recommended as an authentication method. For the metadata connection, a user ID and password is needed. A system user created before is sufficient.
Procedure
Within this guide we generically describe the step-by-step procedure for an example connection set. Perform all steps for the following jCos:
u2022     SAP_R3_Financials / SAP_R3_Financials_Metadata
u2022     SAP_R3_HumanResources / SAP_R3_HumanResources_MetaData
u2022     SAP_R3_SelfServiceGenerics / SAP_R3_SelfServiceGenerics_MetaData
u2022     SAP_R3_Travel / SAP_R3_Travel_MetaData
u2022     SAP_R3_SelfServiceGenerics_MetaDataFIN
1.     Open the Web Dynpro Tool Applications overview page of your SAP NetWeaver Application Server Java: (http://<host>.<domain>:<port>/webdynpro/welcome)
2.     Select the Content Administrator link (or use a direct link, such as http://<host>.<domain>:<port>/webdynpro/dispatcher/sap.com/tcwdtools/Explorer) and logon with j2ee administrator rights
3.     Choose the Maintain JCo Destinations button.
4.     The available jCos are displayed with a red light, indicating that they are not yet maintained.
5.     In the JCo Destination Details iView, choose the Create button for the jCo you want to create.
6.     In Guided Procedure Section 1: General Data, make the following entries:
Field name     User action and values     Note
Name     <jCo_Name> or <jCo_name>_Metadata     Do not change the client number (for example, 100)
Maximal Pool Size     <keep default value>
Maximum connections     <keep default value>
Connection Timeout (msec.)     <keep default value>
Maximum Waiting Time (msec.)     <keep default value>
7.     Choose Next.
8.     In J2EE Cluster, make the following entries:
Field name     User action and values     Note
Use Local J2EE engine <SID> on <host>     Selected     Keep default values
9.     Choose Next.
10.     In Connection Type u2013 Data Type, make the following entries:
Field name     User action and values     Note
Data Type     Dictionary Meta Data     Dictionary Meta Data selected for <jCo_name>_MetaData; Application Data selected for <jCo_name> maintenance
Destination Type     Load-balanced Connection (recommended)     For Dictionary Meta Data Connection, the value cannot be changed
11.     Choose Next.
12.     In Msg. Server Connection, make the following entries:
Field name     User action and values     Note
Message Server     <select message server for your SAP ERP HR system>     The values are taken from the technical system list of the SLD
Logon Group     <select logon group for your SAP ERP HR system>     The values are taken from the technical system list of the SLD
13.     Choose Next.
14.     In Security u2013 User Authentication, make the following entries:
Field name     User action and values     Note
Used Method     <if using <jCo_name>, select Ticket>
<if using <jCo_name>_Metadata, value cannot be changed>
Name     <enter connection user name>     For example, rfcsysuser
Password/Confirm Password     <enter a password>
Language     English
SNC Mode     Off     For more information on SNC Mode, see the SAP NetWeaver 7.0 Help.
15.     Choose Next.
16.     In the Summary step, verify your settings, then choose Finish. The system displays a positive status message.
17.     In the JCo Destination Details iView, choose the Test link. The system displays a positive status message.
If the test fails, try to ping the ABAP system using the URL link. Check your settings, especially SLD, and certificate upload.
Let me know weather your problem solved or not.
Please reward points if helpful
Please close the thread if problem solved
Thankyou,
Regards
Vijai

Register system R3, portal transaction rz70

Similar Messages

Maybe you are looking for