Register the device with another network
Hi everyone!
I have a huge problem with my Bb. I bought the device in an Orange shop in UK and before leaving permanently the country, I unlocked it so that I could use an Italian SIM card. Now I'm in Italy and the problem is that I cannot register with the network here and therefore I cant setup the email account nor use any other internet application. My new carrier (TIM) cannot help me. Is there anything I can do? Please help me!
Solved!
Go to Solution.
Yes, you need to contact Orange and have them remove your device PIN from their network.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code
Similar Messages
-
So, if a remote wipe occurred as the email stated, how did the person with the phone immediately go back to using the data on the phone. Wouldn't the person have to register the Iphone through Itunes? I got the email saying the erase was happening at 11:10. Looking at my cellular data usage, the phone began using data about that time after about a 12 hour break. So it seems like Find my Iphone quickly picked up the phone. But then the phone continued using data for about 3 more hours. How could the person be using the phone if it had just been wiped?
I understand that iCloud's erase function is totally distinct from Verizon's cellular service (i.e. the phone could be wiped and Verizon would never know). It's been a while since I've activated an Iphone through Itunes, but when you activate the phone don't you have to register it? If the iPhone was wiped at 11:10, how could it be using data at 11:15 and consistently for the next three hours. How long does the Itunes registration process take?
-
I have an old IMac with 10.4.11 & the most uptodate Itunes it allows me to download (this isnt the most uptodate as u'd imagine) I now have new Iphone 5 i want to add my itunes songs etc to but when i plug it in it doesnt register the device. Any advice?
Printed on the side of the box your phone came in:
Requirements to sync with a Mac:
OSX 10.6.8 or higher & iTunes 10.7 or higher.
You need to update your computer, if you can or purchase a new computer, if you want to use your phone with your computer. -
The Fibre Channel Platform Registration Service could not register the platform with fabric
Hyper-V Cluster. HP StorageWorks 82E 8 Gb PCI-e Dual Port FC HBA.
Each 15 minutes, eventlog register a warning.
EventID: 2 Source:2
The Fibre Channel Platform Registration Service could not register the platform with fabric 10:00:00:05:1e:7f:74:7b.
I have teste the service. And it's started. Cluster storage validation report without failure.
Someone suggest any idea.
Thanks.Hi,
What’s the OS version of your cluster node?
The Microsoft Fibre Channel Platform Registration Service registers the platform with all available Fibre Channel fabrics and maintains the registrations. A fabric is a network topology where devices are connected to each other
through one or more high-efficiency data paths. This service is used in support of storage area networks.
This service is installed by default on Windows Server 2008, and the service startup type is Manual.
You may try hotfix in KB 978790, and check the result.
For more information please refer to following MS articles:
The File Share Witness resource is in a failed state even though the File Share Witness directory is available, and quorum cannot be maintained in a Windows Server 2008 failover cluster
http://support.microsoft.com/kb/978790
cluster resources unresponsive
http://social.technet.microsoft.com/Forums/hu/winserverClustering/thread/886a9cb3-7723-4b64-8c15-602dadf5ced9
Hope this helps!
TechNet Subscriber Support
If you are
TechNet Subscription user and have any feedback on our support quality, please send your feedback
here.
Lawrence
TechNet Community Support -
A computer illiterate friend created 3 accounts on his iPhone 5 but forgot the passwords. He can't reset the password as his yahoo address is no longer valid. Erasing the phone doesn't solve the issue as the Apple server identifies the hardware as registered. How to register the phone with Apple?
I helped him create a new email address and new iCloud account on my Mac but when we try to register the phone with Apple it says: Maximim accounts limit reached for this device. How can he register the phone? I read different threads and found out that only Apple care can do that. We're in Romania and don't know where to call. Any suggestions on how we fix this?When I checked the support site for Romania, you apparently don't have an Apple Care contact center. You "may" try calling the US Apple care number to verify the account and have the password reset sent to a different email address. 800-694-7466
-
Error while Registering the Database with Catalog..
I m creating recovery catalog in same database, and getting the errors.
1. I have created TOOLS tablespace
2.CREATE USER RMAN2
SQL> CREATE USER rman IDENTIFIED BY cat
2 TEMPORARY TABLESPACE temp
3 DEFAULT TABLESPACE tools
4 QUOTA UNLIMITED ON tools;
CREATE USER rman IDENTIFIED BY cat
ERROR at line 1:
ORA-01920: user name 'RMAN' conflicts with another user or role name
SQL> ed
Wrote file afiedt.buf
1 CREATE USER rman2 IDENTIFIED BY cat
2 TEMPORARY TABLESPACE temp
3 DEFAULT TABLESPACE tools
4* QUOTA UNLIMITED ON tools
SQL> /
User created.
3. GRANT RECOVERY_CATALOG_OWNER
SQL> GRANT RECOVERY_CATALOG_OWNER TO rman2;
Grant succeeded.
4. To create the recovery catalog:
1. Connect to the database that will contain the catalog as the catalog owner.
H:\>rman catalog rman2/cat@rock
Recovery Manager: Release 10.2.0.1.0 - Production on Fri Sep 5 10:45:52 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
connected to recovery catalog database
2. Run the CREATE CATALOG command to create the catalog.
RMAN> CREATE CATALOG;
recovery catalog created
3. Optionally, start SQL*Plus and query the recovery catalog to see which tables were created:
H:\>sqlplus
SQL*Plus: Release 10.2.0.1.0 - Production on Fri Sep 5 11:53:36 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Enter user-name: rman2/cat
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
SQL> select count(*) from cat;
COUNT(*)
91
SQL> ed
Wrote file afiedt.buf
1 select owner, table_name, tablespace_name
2 from dba_tables
3* where table_name='DB'
SQL> /
OWNER TABLE_NAME
TABLESPACE_NAME
RMAN2 DB
TOOLS
RMAN DB
ABAMCO_TEST
Next step is to registering the Database in the Recovery Catalog.
Registering a Database in the Recovery Catalog
H:\>rman TARGET / CATALOG rman2/cat@rock
Recovery Manager: Release 10.2.0.1.0 - Production on Fri Sep 5 11:56:09 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00554: initialization of internal recovery manager package failed
RMAN-04005: error from target database:
ORA-01031: insufficient privileges
I m getting above error while registering the Database with Catalog,
Can anybody help me how can I register the Database with Catalog.????
Waiting for Reply!!!!!!!Dear Manoj I can log in at TARGET Database.
H:\>rman
Recovery Manager: Release 10.2.0.1.0 - Production on Fri Sep 5 12:41:59 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
RMAN> connect target sys/rock
connected to target database: ROCK (DBID=3255117147)
RMAN>
============================================================
USING CONNECT STRING as you said.
H:\>rman target "sys/rock@rock as sysdba" catalog rman2/cat@rock
Argument Value Description
target quoted-string connect-string for target database
catalog quoted-string connect-string for recovery catalog
nocatalog none if specified, then no recovery catalog
cmdfile quoted-string name of input command file
log quoted-string name of output message log file
trace quoted-string name of output debugging message log file
append none if specified, log is opened in append mode
debug optional-args activate debugging
msgno none show RMAN-nnnn prefix for all messages
send quoted-string send a command to the media manager
pipe string building block for pipe names
timeout integer number of seconds to wait for pipe input
checksyntax none check the command file for syntax errors
Both single and double quotes (' or ") are accepted for a quoted-string.
Quotes are not required unless the string contains embedded white-space.
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00552: syntax error in command line arguments
RMAN-01009: syntax error: found "as": expecting one of: "append, at, auxiliary, catalog, cmdfile, clone, checksyntax, debug, log, msglog, mask, msgno, nocatalog, pipe, rcvcat, script, slaxdebug, send, target, timeout, trace"
RMAN-01007: at line 0 column 16 file: command line arguments
H:\>rman
It didnt work either.
I have only one database rock, and created recovery catalog in it. I want to register rock database with recovery catalog. -
Apple should do something for the equipment stolen something like block it(them) and only activated by key words given to register the device on the apple's website
Tell Apple:
http://www.apple.com/feedback
Doubtful that this would happen. Privacy laws would likely be tested with this.
No manufacturer does this. -
I recently updated to IOS Yosemite and i cannot update my iPhoto because i registered my Macbook with another ID. It tells me i need to purchase iPhoto, how to i purchase iPhoto?
Yosemite is not iOS. It is OS X which run on Macs.
Go to the App Store on your Mac and download iPhoto. -
Two days ago, I left my New iPad on a plane. My bad, I know. However, whoever sat in the seat after me, helped themselves to a brand new iPad and did not turn it in to the airline. So far, Find My iPad has been no help. The device appears offline. I feel fairly sure that whoever took it has at least turned it on. I've sent messages but no one has called. I've also done a simple search to see how difficult it would be for someone to reset the device to factory and there are plenty of websites giving instructions on how to do that. At any rate, I registered my device with Apple, which includes the serial number of the device. If Apple had a registry where I could list it as stolen, when the culprit attempts to register the device, Apple would flag it as stolen and perhaps it could be recovered. I appreciate the "Fine My iPad/iPhone" app for when I misplace one of them in my own home or office, but in this case, it was no help at all. I only had my new iPad for about a month and now it's gone. I will buy a new iPad because I love it and really use it alot, but I'll be afraid to take it anywhere. What's the point of having a mobile device if you are afraid to take it anywhere?
These links may be helpful.
How to Track and Report Stolen iPad
http://www.ipadastic.com/tutorials/how-to-track-and-report-stolen-ipad
Reporting a lost or stolen Apple product
http://support.apple.com/kb/ht2526
Report Stolen iPad Tips and iPad Theft Prevention
http://www.stolen-property.com/report-stolen-ipad.php
How to recover a lost or stolen iPad
http://ipadhelp.com/ipad-help/how-to-recover-a-lost-or-stolen-ipad/
How to Find a Stolen iPad
http://www.ehow.com/how_7586429_stolen-ipad.html
Apple Product Lost or Stolen
http://sites.google.com/site/appleclubfhs/support/advice-and-articles/lost-or-st olen
Oops! iForgot My New iPad On the Plane; Now What?
http://online.wsj.com/article/SB10001424052702303459004577362194012634000.html
How to Find Your iPad Serial Number
http://www.ipadastic.com/tutorials/how-to-find-your-ipad-serial-number
Cheers, Tom -
I have FIFA 13 installed on another apple device with another Apple ID. How do I install FIFA on my current device, which has a different apple ID.
Use the Apple ID you used on the other Device on your current Device.
-
I bought a used iPhone on ebay. when I try to activate it, I get a message that the owner needs to sign in to the device with their appleID and password. I have no way of knowing who the owner is. How can I get around this?
Check the eBay listing. Did it state the device was Activation Locked? If not, then make a claim as Meg stated and get a refund. You will not be able to activate the phone and no one can help you contact the owner, unless that is the person that sold the device. If they cannot remove the phone from their account because it is not theirs, then refund is your route. Even Apple cannot assist with locating the previous owner.
-
Since i got the new Iphone 4s it constantly drops calls. Apple have replaced the phone with another new iphone 4s but i am still having the same problem. I have checked with vodapohe that there is no issue from there end, given a new sim, still drops out
Have a look at this it might help
http://support.apple.com/kb/TS4148 -
The battery life between charges on my iPad has plummeted to about 2 hours. The guy at the genius bar said the charge should last about 10 hours and suggested it might be an app (unfortunately I didn't have the device with me and the nearest Apple Store to me is 2 hours away). Does anyone know of apps that cause heavy drains on power? It also does not charge when it is plugged into my MacBook while I am using the iPad but it does when I am not using the iPad. I mostly use the iPad to read e-mails, play Team Lava games, read books through iBooks or Kobo and the ABC Player. Any thoughts would be greatly appreciated! Thanks!
Restore is about the only option left, short reinstalling the whole thing as new.
Before you restore, go to I tunes and turn off automatic sync. Then plug the machine in. Upload any photos that you have taken with the pad into I photos, or where ever you keep your pictures. Then, in I tunes, transfer any purchases.
If any apps or purchased music get lost in the process, you can download them again for free.
You do not want to make a backup of what you have on the pad now. If you do, when you restore, you will simply recreate the same problem.
What you want to do is restore from a prior backup. Do that.
Then run the system status app and see what the CPU numbers look like. If they are ok, then you can start to re add apps until the problem shows up.
If this does not do it, then the last step is to set the pad up as new. Check the numbers, then add the apps and settings back one by one. While it is likely to be an app, it may be a setting somewhere. -
Fail to register the jobs with OEM
I have done following steps in developing a data warehouse project but im still in problum to load data from source to target:
Create a source object with thier tables
create a target object a dimension
create a mapping
create to operator one for source table and other for dimension
linked colum by column
validate this mapping
genrate this mapping
deployed this mapping
but i am facing problum while i am goining to register the TCL with OEM. I am unable to register this and following error occures
Faild to register the jobs with OEM:OEM registration Faild: OEM client not installed in Oracle_Home.
java.lang.NoClassDefFoundError.
Oracle/sysman/enSDK/client/omsClient/BadAttributeException
Exception in thread "main"
Plz help me to solve this problum.
Plz give me exact solution.
Plz give me steps from start to end of a data warehouse project.Steps involves in design ,validate and genrate and loading phase plz give me list of these steps.This combination is not certified. Please upgrade OWB to the latest available version (9.0.3.35) that is certified on the 9.2.0.1 database.
Regards:
Igor -
Qosmio X500-10W - Can I replace the HDD with another one?
Hello
I have a Qosmio X500-10W with two HDD Toshiba MK5055GSX 500GB 5400RPM 8MB ??SATA II but is one of hs so I wonder if I can be replaced by a more powerful style HDD 750GB 7200tr / min 16MB Toshiba course?
merciHey,
Your question is a little bit hard to understand but I think you want to replace the HDD with another (faster) model, right?
Well, thats no problem. HDDs with 7200rpm will work, they are a little bit louder but they are faster so if you need more performance no problem.
Also 750GB or more is no problem because SATA interface is not capacity limited. Theoretically 1TB or more should also work.
Anyway, you can buy the 750GB you mentioned it will work. :)
Maybe you are looking for
-
Go to a page in this document - Acrobat X
I have recently upgraded to Acrobat X Professional. Every week we create many PDFs that we manually link up after exporting from InDesign. Previously we used acrobat 6 and were able to create links to specific pages easily.. now the option seems to h
-
How to resize the Page Content componet through css
Hi, We need a fix size of each component in a page . e,g. if my page contains recent activity, discussion , announcement,document list, etc. we need each component styles must be coming from the css class i,e the width,height of component should comi
-
Synching iPhone and iPad with new iMac - former pc user
I'm trying to determine to most efficient way to set up iTunes and synching of my iPhone 4 and iPad on my new iMac. I am finally moving away from using a pc and am facing the issue of trying to preserve all the content on my devices as I set up the i
-
HT1937 I need help with verifying my account
My phone is not letting me verify my account but it did verify my email how do I verify my account so I can go on the iTunes store
-
Update number of reading with shared library
Hey, I use to listen my music present on my MacBook with my iPad using home-sharing. But when I play a song on my iPad that did not increase the number of reading on my Macbook. I have turn on the option in itunes preferences to allow this but withou