Registered application is not active at the moment.

Two symtoms
This happens with the Native Admin or any MSAD Shared Services admin.
When in Shared Services - Right Click on Hyperion System 9 BI+ - the option to Assign Preference is not available
Also when selecting the same project the following message -
Registered application is not active at the moment. Please consult your system administrator.
This is not of a case of it breaking. This was the symptom since the original installation.
System 9.3.1 -
Note - Regestering BI with Shared Services does an interesting thing - The menu appears to Assign Preference - but a page cannot be displayed also appears.
When recycling services the menu option disappears again.
Any thoughts?

Hi,
I have exactly the same error with a different external directory wich is Open LDAP.
Did you get any answers or tips around this error ?
Thanks,
Gaël.

Similar Messages

  • Problems Shared Services:Registered application is not active at the moment

    Hi!
    I have a problem with Hyperion Shared Services (HSS) and Hyperion Performance Socrecard (HPS), my projecto from HPS appears like if not it was registered in HSS.
    The error is: Registered application is not active at the moment. Please consult your system administrator.
    The information was migrated from other server, now already run configuration utility and configurate my proyect, but not appears in HSS.
    Optional: This is necessary for assign sercurity roles by Domain?
    Thank you very much.

    Did you get this resolved .
    Vinod

  • Registered application is not active at the moment. Please consult your sys

    Registered application is not active at the moment. Please consult your system administrator. This is what I often (and now) see when opening the default created application "Hyperion System 9 BI+:#####.intranet.######.nl:6800::1 BI+ 9.3.1 " under default created project "Hyperion System 9 BI+" in Shared Services. Even after restaring all the relevant services in the right sequence with the right delay I still got the message. Anyone an idea?

    Hi,
    I'm also interested in the answer, if you got it.
    Thanks,

  • Container MigrationContainer is not active at the moment

    Hi All,
    Below mentioned error encountered while deploying SAP-CRMDIC component using the file SAPCRMDIC17_0-10002941.SCA. It ended up in "ERROR" status in JSPM.
    Problem might be due to the "inactive container". Could you please let me know a easiest method to deploy the SAP-CRMDIC component.
    predecessor system -
                         com.sap.engine.services.deploy.exceptions.ServerDeploymentE
    xception: Container MigrationContainer is not active at the moment and it is not
    possible to update sap.com/crmmigrxcm.
                            at com.sap.engine.services.deploy.server.application.Upd
    ateTransaction.getConcernedContainers(UpdateTransaction.java:485)
                            at com.sap.engine.services.deploy.server.application.Dep
    loyUtilTransaction.commonBegin(DeployUtilTransaction.java:265)
                            at com.sap.engine.services.deploy.server.application.Upd
    ateTransaction.begin(UpdateTransaction.java:166)
                            at com.sap.engine.services.deploy.server.application.App
    licationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:292)
                            at com.sap.engine.services.deploy.server.application.App
    licationTransaction.makeAllPhases(ApplicationTransaction.java:326)
                            at com.sap.engine.services.deploy.server.DeployServiceIm
    pl.makeGlobalTransaction(DeployServiceImpl.java:3190)
                            at com.sap.engine.services.deploy.server.DeployServiceIm
    pl.update(DeployServiceImpl.java:671)
                            at com.sap.engine.services.deploy.server.DeployServiceIm
    plp4_Skel.dispatch(DeployServiceImplp4_Skel.java:1278)
                            at com.sap.engine.services.rmi_p4.DispatchImpl._runInter
    nal(DispatchImpl.java:330)
                            at com.sap.engine.services.rmi_p4.DispatchImpl._run(Disp
    atchImpl.java:201)
                            at com.sap.engine.services.rmi_p4.server.P4SessionProces
    sor.request(P4SessionProcessor.java:137)
                            at com.sap.engine.core.service630.context.cluster.sessio
    n.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.ja
    va:33)
                            at com.sap.engine.core.cluster.impl6.session.MessageRunn
    er.run(MessageRunner.java:41)
                            at com.sap.engine.core.thread.impl3.ActionObject.run(Act
    ionObject.java:37)
                            at java.security.AccessController.doPrivileged(AccessCon
    troller.java:207)
                            at com.sap.engine.core.thread.impl3.SingleThread.execute
    (SingleThread.java:104)
                            at com.sap.engine.core.thread.impl3.SingleThread.run(Sin
    gleThread.java:176)
                         For detailed information see the log file of the Deploy Ser
    vice.
    11/02/12 19:54:04 -  ***********************************************************
    Feb 12, 2011 7:54:04 PM  Info: End of log messages of the target system.
    Feb 12, 2011 7:54:04 PM  Info: ***** End of SAP J2EE Engine Deployment (J2EE App
    lication) *****
    Feb 12, 2011 7:54:04 PM  Error: Aborted: development component 'crm/migr/xcm'/'s
    ap.com'/'MAIN_CRM50VAL_C'/'7630861'/'2', grouped by :
    Caught exception during application deployment from SAP J2EE Engine's deploy ser
    vice:
    java.rmi.RemoteException: Cannot deploy application sap.com/crmmigrxcm..
    Reason: Container MigrationContainer is not active at the moment and it is not p
    ossible to update sap.com/crmmigrxcm.; nested exception is:
            com.sap.engine.services.deploy.exceptions.ServerDeploymentException: Con
    tainer MigrationContainer is not active at the moment and it is not possible to
    update sap.com/crmmigrxcm.
    (message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDepl
    oyerImpl.performAction(DeploymentActionTypes).REMEXC)
    Feb 12, 2011 7:54:04 PM  Info: Starting to save the repository
    Feb 12, 2011 7:54:05 PM  Info: Finished saving the repository
    Feb 12, 2011 7:54:05 PM  Info: Starting: Update: Selected software component 'SA
    P-CRMDIC'/'sap.com'/'MAIN_CRM50VAL_C'/'1000.5.0.17.0.20100820072113''/'2' update
    s currently deployed software component 'SAP-CRMDIC'/'sap.com'/'MAIN_CRM50VAL_C'
    /'1000.5.0.14.0.20090211084319''/'1'.
    Feb 12, 2011 7:54:05 PM  Error: Aborted: software component 'SAP-CRMDIC'/'sap.co
    m'/'MAIN_CRM50VAL_C'/'1000.5.0.17.0.20100820072113''/'2':
    Failed deployment of SDAs:
    development component 'crm/migr/xcm'/'sap.com'/'MAIN_CRM50VAL_C'/'7630861'/'2' :
    aborted
    Please, look at error logs above for more information!
    Feb 12, 2011 7:54:05 PM  Info: Starting to save the repository
    Feb 12, 2011 7:54:05 PM  Info: Finished saving the repository
    Feb 12, 2011 7:54:05 PM  Info: J2EE Engine is in same state (online/offline) as
    it has been before this deployment process.
    Feb 12, 2011 7:54:05 Error: -
    At least one of the Deployments
    failed -
    Thanks.

    Hi,
    You would need to start the services MigrationService and MigrationContainer using following commands.
    - connect via telnet to the system: telnet <hostname> 5<instance number>04
    - authenticate with administrator username/password
    - jump <server_id>         Server ID can be obtained from the Visual Administrator/or from System Information Page.
    - startservice MigrationService
    - startservice MigrationContainer
    Then retry the deployment.
    Regards,
    Srikishan

  • Bridge will not now let me use camera raw, though I had been using it every day.  It says that "the parent application is not active.  Bridge requires that a qualifiying product has  been launched at least once to enable this feature."  What am I to do?

    Bridge will not now let me use camera raw, though I have been using it every day.  It ways that "the parent application is not active.  Bridge requires that a qualifiying product has  been launched at least once to enable this feature."  What am I to do?

    Usually this points to having some kind of earlier trial version still installed on your system. However without more details you are not likely to find an answer. Try this for a start:
    How To Get Help Quickly

  • Java is not active in the application server

    Hi Experts
    We recently installed CRM 5.0.  Everything seems to have installed without any issues. 
    However, we are having a few issues the Java Virtual Machine (VMC). 
    When trying to access the VMC through ABAP side of CRM (SM53), it gives and error message that "Java is not active in the application server". 
    Eventhough everything seems to have been installed.
    Any ideas on how to activate java. 
    Any help would be really appreciated.
    Thanks
    Imran Khan

    Hi Daniele:
    There are indeed only 3 parameter additions
    vmcj/enable = on
    vmcj/option/ps = 512M
    vmcj/option/maxJavaHeap = 200M
    The 4th one is just explanation for calculating sizes.
    My VMC is active with only the above three settings.
    Also make sure that the SP level for both the JAVA components and ABAP components is the same.  i.e. they are both running on the latest version.  The latest update was released in Late April.
    If the SPs are from differnt releases, the VMC will not work.
    Also, go into the server and have a look at the parameter file to make sure that settings are actually there. i have found out that settings  in RZ10 and the real parameter settings can be different.  Just make sure that the settings you want the system to take are indeed in the real parameter file.
    I am not sure what else you can do...but rest assured that the thing works with the above mentioned settings.
    Imran

  • In Adobe Bridge when I try to open my camera raws, I get a pop up box stating "Bridges parent application is not active.  Bridge requires that a qualifying product has been launched at least once to enable this feature"  What do I do? Please advise

    In Adobe Bridge, when I try to open my camera raws, I get a pop up stating"Bridges parent application is not active.  Bridge requires that a qualifying product has been launced at least once to enable this feature."  What the heck?  I have a PC and haven't had problems before.. I have adobe cloud and pay my monthly bill...

    Have you opened Photoshop or any other Adobe app that Bridge works with?  You need to do this if you've upgraded PS or just signed up for CC.

  • Bridge's parent application is not active

    Hi,
    I've suddenly come across a problem with Adobe Bridge where it isn't allowing me to open .CR2 files into Camera Raw. When I right click on an image in Bridge, an error message pops up:
    "Bridge's parent application is not active. Bridge requires that a qualifying product has been launched at least once to enable this feature."
    Originally, I opened Photoshop CS6, then File > Browse in Bridge. I've have opened ACR hundreds of times on this computer so I don't understand why it wants me to open it to be able to use it. I've opened a RAW file from Windows explorer, but when going back to Bridge, the same error occurs.
    Does anyone know what the problem is here and how to fix it?
    Running Windows 7, Photoshop CS6 64-bit, ACR 7.1, Bridge CS6 64-bit.
    Thank you!

    Then, in Bridge, I get the dreaded "Camera Raw blah blah blah" message when trying to open files in ACR by pressing 'cmd-R' or going to File > Open in Camera Raw.
    This seems related to an old thread and I'm using email to read and write to the forum. Can you clarify a bit more about the blahblah?
    You stated that it happened suddenly this morning and also mention a subscription trouble with the creative cloud. Did you use Bridge after the trouble was solved and it worked but stopped this morning or was it directly after you reinstalled everything?
    Did you already try the obvious restart Bridge holding down option key and choose reset preferences? The Clean tool is not deleting everything Adobe has installed before.
    And double check on the updates, the application manager sometimes has a mind of its own, especially when having multiple language versions installed, it only updates the language version set in preferences.
    And check PS the About Menu
    for about PS it should say 13.1.2 x64
    and about plug in / camera raw it should say 7.3.0.71.
    And in Bridge About Bridge it should say 5.0.2.4
    Can you confirm this and can you also report what other applications you have installed from the creative cloud.
    And since I changed to OSX 10.8 I can't check myself, is 10.7.5 the latest update?

  • Bridge CC parent application is not active

    Hi, I'm currently using elements 13 (that's both premiere and photoshop) on windows 7 64 bit. I installed Bridge CC specifically to use the camera Raw feature, however as the title says every time I attempt to open a .cr2 file using camera raw it brings up the message "bridge's parent application is not active. Bridge requires that a qualifying product has been launched at least once to enable this feature."
    Now I assume a qualifying product would be photoshop, which i've opened before, I've looked around elsewhere for solutions and only found swapping the AMTlib.dll which hasn't worked at all for me as it just breaks bridge completely. This is bearing in mind that everything worked fine on elements 12 on my previous PC but I've gotten rid of that and there's no way for me to able to access it now.
    Thanks for the help in advance.

    Bridge CC only works with CC products not Elements versions of anything which have their “Organizer”.

  • What does 'Bridge's parent application is not active" mean?

    I just installed Adobe CS5 design premium and I am trying to open Camera RAW files in Bridge in Camera RAW, but it keeps giving me an error saying, "Bridge's parent application is not active.  Bridge requires that a qualifying product has been launched at least once to enable this feature."  What does this mean?  What am I supposed to do in order to use this feature of Bridge?  Thanks for helping me.

    This has been a problem for some.  Try opening Bridge from Photoshop or another application, rather than from the Bridge icon.

  • Bridge's parent application is not active. Bridge requires that a qualifying ....

    Hi,
    After installing CS6, whenever I try to open Camera Raw Preference, I get this error message ....
    Bridge's parent application is not active. Bridge requires that a qualifying product has been lauched at least once to enable this feature
    Can anybody kindly tell me exactly what this means, and more important, how to fix this problem? 
    Thank you.

    Most of the time it means you have an expired Adobe trial on your computer.  Bridge is waiting for it to give command.  Find and uninstall the trial.

  • Resource com.sap.aii.af.svc with type service, not active on the server

    Hi Forum,
    in my X1 server, in rwb, it gave error:
    HTTP request failed. Error code: "503". Error message: "Service Unavailable [http://xyz:50000/AdapterFramework/rtc,
    on further analysis we find that:
    <b>  Application cannot be started.
      Details:   com.sap.engine.services.deploy.container.ExceptionInfo: Application sap.com/com.sap.xi.mdt cannot be started. Reason: it has hard reference to resource com.sap.aii.af.svc with type service, which is not active on the server.</b>
    and the service/component com.sap.aii.af.svc is not present as the error says,
    In visual admin, in the services list i couldnt find this particular resource,
    pls instruct me how to deploy/start this service com.sap.aii.af.svc ,

    Hi,
    Please check out the user authorization and role and also check that you are maintaining the passwords in all places where required.
    Regards
    Aashish Sinha
    PS : reward points if helpful

  • SNC is not activated in the ECC system.

    Hi Experts,
    The ECC system is not coming up when I add the below mentioned parameters in the Instance profile. The issue I have identified it is database is coming up but SAP application is not and all the work process are in ended stated and message server & dispatcher are not coming up in the system.
    The SNC Parameters are...
    snc/enable =1
    snc/identity/as=p:SAPServiceSID/abcdevde1.abc.no at ABC.NO
    snc/accept_insecure_gui=1
    snc/gssapi_lib = /usr/lib/libgssapi_krb5.a (libgssapi_krb5.a.so)
    Kindly,see the work process developer trace log details...
    N SncInit(): Initializing Secure Network Communication (SNC)
    N IBM RS/6000 with AIX (st,ascii,SAP_UC/size_t/void* = 16/64/64)
    N SncInit(): found snc/data_protection/max=3, using 3 (Privacy Level)N SncInit(): found snc/data_protection/min=2, using 2 (Integrity Level)
    N SncInit(): found snc/data_protection/use=9, using 3 (Privacy Level)N SncInit(): found
    snc/gssapi_lib=/usr/lib/libgssapi_krb5.a(libgssapi_krb5.a.so)
    N File "/usr/lib/libgssapi_krb5.a(libgssapi_krb5.a.so)" dynamically
    loaded as GSS-API v2 library.
    N The internal Adapter for the loaded GSS-API mechanism identifies as:
    N Internal SNC-Adapter (Rev 1.0) to Kerberos 5/GSS-API v2
    N SncInit(): found
    snc/identity/as=p:SAPServiceSID/abcdevde1.abc.no at ABC.NO
    N *** ERROR => SncPAcquireCred()==SNCERR_GSSAPI [sncxxall.c 1439]
    N GSS-API(maj): Miscellaneous failure
    N GSS-API(min): No such file or directory
    N Could't acquire ACCEPTING credentials for
    N name="p:SAPServiceSID/abcdevde1.abc.no at ABC.NO"
    N SncInit(): Fatal -- Accepting Credentials not available!
    N <<- SncInit()==SNCERR_GSSAPI
    N sec_avail = "false"
    M ***LOG R19=> ThSncInit, SncInitU ( SNC-000004) [thxxsnc.c 230]
    M *** ERROR => ThSncInit: SncInitU (SNCERR_GSSAPI) [thxxsnc.c 232]
    M in_ThErrHandle: 1
    M *** ERROR => SncInitU (step 1, th_errno 44, action 3, level 1)
    [thxxhead.c 10651]
    As per the forum rules @---> at is replaced in the above error.
    Kindly,look in to the issue and suggest the solution how to activate the SNC in the ECC system for the Kerberos SSO purpose.
    OS : AIX 6.1
    SAP : SAP Netweaver EHP1
    Database : IBM DB2 9.5
    Actually,I'm configuring the Kerberos SSO between Active Directory & SAP. I have already generated the keytab file in the AD and copied in the AIX system under the /etc/krb5 directory.The Ticket-Grating-Ticket is genarated in the system and SIDADM is able to access the keytab file.
    If any one faced already above stated issue and please provide the solution if you have resolved the issue.
    Thanks & Regards
    Sandeep.

    N Could't acquire ACCEPTING credentials for
    N name="p:SAPServiceSID/abcdevde1.abc.no at ABC.NO"
    N SncInit(): Fatal -- Accepting Credentials not available!
    You need to authenticate to your KDC before you start SAP.
    As <SID>adm user execute:
    kinit -V -k SAPServiceSID/abcdevde1.abc.no at ABC.NO
    The result should be "Authenticated to Kerberos v5". You must get this right before you start your SAP system and then add it to a cron job so that the tickets get automatically renewed otherwise they will expire.
    Nelis

  • Delta extraction is not possible at the moment

    Hello,
    I am trying to run a delta load and am getting the message "Delta extraction is not possible at the moment".  This is actually a repeat because i have tried this load multiple times with no success.
    The Diagnosis in the error message is:
    The delta extraction is not possible at the moment because the status list of the request is locked in the Cube. This can be for a number of reasons:
    1. Another extraction is taking place in the target BI.
    2. The control parameters of the request in the InfoCube are locked by deletion or compressing processes.
    I dont see that any other extraction or a deletion or compression job.  I've tried going through each failed job in the monitor and red lighting them but that hasnt helped.  Any ideas what to check or how to fix the problem?
    Regards,
    TMS

    Hi,
    From what you are describing, there is already some process going on on the infoprovider you are trying to load the data to. Check if a data load is still active/activation is happening, if its a cube then are there aggregates and are they rolling up. You can check the process in SM66 or SM50 and the jobs in SM37.
    The process has locked the infoprovider and no delta or for that matter any process can be done until the earlier one finishes. You can take help from the BASIS team to find out what is locking your infoprovider.
    Cheers,
    Kedar

  • "The PowerPivot service application could not connect to the Analysis Services instance"

    Hi
    I am baffled by this one.  I have a PowerShell script I have built up to install PowerPivot, which I have put together by reading various blogs and by picking apart the scripts that come with the PowerPivot installer.
    However, once I have built the service app and installed/activated the solutions and features, I get the error "The PowerPivot service application could not connect to the Analysis Services instance" when trying to use it.  I can't find any
    more detailed messages, even with verbose logging turned on.  SSAS\PowerPivot is of course installed and connected to Excel as it should be.
    I have tried running the PowerPivot for SharePoint validation tool and it doesn't find anything.
    If I install PowerPivot using the PowerPivot for SharePoint installer, then delete the service app and rerun my scripts, everything then works fine.
    So there is something the installer is doing that I am not, but I cannot for the life of me figure out what it is.  I though it might be permission related, but the official installer installs the service under the farm account, not my BI service account. 
    Ahaa, I thought, but when I then reinstall the service myself with my scripts, using my BI service account, the service app then works, so I don't think it can be permission related.
    Doing a Google search on that message pulls up only one old post (repeated a few times), which talks about using a domain account for the SSAS instance instead of a Local System account - I am using the same domain service account for SSAS, Excel and
    PowerPivot already, so that doesn't help me much.
    Does anyone have any ideas for me or suggestions on how I might proceed?
    Andrew vR

    Did you run the "Run PowerPivot for SharePoint Configuration Tool" after installing PowerPivot and did that work okay?
    Kind regards,
    Margriet Bruggeman
    Lois & Clark IT Services
    web site: http://www.loisandclark.eu
    blog: http://www.sharepointdragons.com

Maybe you are looking for