Registered numbers problem
I register new tel no. in skype to go. Then I make international call - works well.
Then I try another call, but cant connect to my acces number. Voice message "Połączenie nie może być zrealizowane". Happens every time. I did try many intervals (minutes and hours).
So I remove this registered number, add it again and I can make 1 single call again. If I try one more time: the problem comes back.
Same happens if I add new number and try calling after some time (2-3 day) - cant get through to acces number.
Acces number: in Poland, Warsaw (22)
My mobile: Orange
Happens: always.
Its realy frustrating. Any ideas?
Adam
Ted,
You don't have to remove the older version from your computer, but you should make sure you know which one you are using, and use the newer one for most things. Quit Numbers. If you have a Numbers shortcut icon on your Dock, use it to start Numbers. Then choose Numbers > About Numbers and see which one you are using. If it's Numbers 08, the first version, quit it and drag the shortcut icon off your Dock.
Now use Finder to browse your Applications folder for iWork 09. In that folder, find Numbers and launch from there. Check to make sure you have started Numbers 09. Then right-click the icon on the Dock and choose to keep that icon on the Dock.
You should be good from there on.
Jerry
Similar Messages
-
Hello,
I have a problem with the VAT Register numbers in Italy. This is a serious issue for the Italian authorities.
The number of the month of June starts with 2008/1 instead of 2008/8.
The last printing was related to April month and the last page was 2008/7.
In the previous months the number flow has always been correct.
Has anyone had a similar issue?
How has it been solved?
Thank you.
Kind regards,
LindaHi,
Could the number be incorrect because the company has skipped a month?
The report of April had the right numbering.
In May, no tax movements happened.
Now, we want to make the report of June.
Thank you for giving your advice.
Kind regards,
Linda -
Hello,
after reading in the discussion forums I still cannot solve my DSC Modbus problems.
First I'm confused about register numbering.
Playing around with the registers, which the multiple variable shows, give me the finally success polling values:
Registers in device documentation: 0x0000 - 0x0007 Finally I found them on 300001-300008
Question: Why is the leading 3 needed....?
Sniffing with Ethereal shows me "function 4" is used for reading by Labview.
Question : Howto use Modbus function 3 or (for writing) 5, 6, 15, 16, (read and write) 23?
My biggest problem at the moment:
I want to read register 0x1010 = 4112d it contain a length of process data byte in packed format. Reading ends in exception 0x8BBB0005
Thanks in advance for an answer or just a link with similar problemsYou have different types of registers inside a controller. 3xxxxx are input registers and 4xxxxx are holding/output registers. Check out the attached pdf file.Message Edited by unclebump on 07-26-2006 02:04 PM
Attachments:
PI_MBUS_300.pdf 173 KB -
Purchase register report problem
Hi experts - please help
we have a requirement to create a purchase register for material from PO- to Invoice.
we have PO number -> GRnumber -> Invoice number in our rows . In our keyfigures we have PO Quantity, PO value , GR quantity,GR Value, Invoice quantity and invoice amount .
Becoz of invoice and GR number relationship which is m: m in our report we see that the key figure values are showing up like
for 1 purchase order multiple line items , with multiple gr's, with multiple invoices , becoz of which we see PO quantity field showing like say if it is 30 for 1 PO it is showing 30 for all the invoice numbers in the report which not want , the same case is with Gr quantity and invoice quantity
PO.no / po item / gr no / inv number / po quanitity / po value
1000/10,20,30,40/1000/2000,3000,4000,5000/ 30,30,30,30,30/ 120,120,120,120,120
this way for 1 PO the report is showing same po quantity based on say if 10 invoices it is showing same P0 Quantity 10 times which is not want and the result row shows up (POvalue *10).
how to get rid of this situation..
please suggest any way if anyone has done a similiar report..
any documents related to such purchase register report is highly appreciated.
thanks & regards
krishnaHi Krishna,
Your PO DSO will have records like this.
PO Item POquantity GR Quantity
PO1 1 100 35
Your GR DSO will have information as shown below.
GR Doc Item Posting date GR Quantity PO PO Item
DOC1 1 01.07.2011 20 PO1 1
DOC2 1 10.07.2011 15 PO1 1
If the report is based on PO, ( Document date of PO ), then you can show information from the first DSO. If the user wants to have the details of GR documents that constitute GR quantity of 35, you can create a 'Jump to' report on the second DSO and in the RRI Connection map the PO and Item numbers.
This way you will be able to store the information at different granularity and combine them in reporting.
Hope this explains,
Thanks,
Krishnan -
How can I fix my page numbering problem?
I am creating a catalog in InDesign. Master pages were set up so the left and right pages had the page numbers in the lower outside corners.
Today I moved some pages around, and as a result the left side pages are now right side, and vice versa.
The problem I am facing is that on some of the pages, the page number is now in the inside corner, and on some of the pages, the page numbers are on both the inside and outside corners. The numbering is correct, but the positions are wrong.
I tried:
1. Overwriting all master page items for the page, then trying to delete or move the page number, but there is a faint yellow box around the number and it cannot be deleted or removed.
2. Applying the correct master page to the page I am trying to fix; this works in some cases, but in others it just places the new text boxes on top of the old ones.
Any help would be appreciated! I am using CS6 on a Mac. My master pages include a text box at the top, a blank box to show the page with bleed, and a page number indicator.After I resist the temptation to ask why you're transcoding to ProRes in mid-stream, all I can come up with is:
Need more info on the error circumstances
OR
You could batch the source clips in Compressor and start over
OR
Try smaller batches
OR
Trash your prefs, repair permissions, and try again -
I am trying to do the following type of list:
a. Step
b. Step
c. Step
1. Sub step
2. Sub step
d. Step
I am controlling the numbering in the EDD. My problem is that step d defaults to 'c' instead of d and I have to manually change it from <a+>.\t to <a=4>.\t. Steps 1 and 2 are set to <n=1>.\t and <n+>.\t. So why doesn't the next alpha list pick up on the last alpha list instead of the last numeric list? Is there any way to fix this? Thanks! JW_JW_ wrote:
I am trying to do the following type of list:
a. Step
b. Step
c. Step
1. Sub step
2. Sub step
d. Step
I am controlling the numbering in the EDD. My problem is that step d defaults to 'c' instead of d and I have to manually change it from <a+>.\t to <a=4>.\t. Steps 1 and 2 are set to <n=1>.\t and <n+>.\t. So why doesn't the next alpha list pick up on the last alpha list instead of the last numeric list? Is there any way to fix this? Thanks! JW
A FrameMaker SGML EDD can define context rules that manage the numbering instead of using paragraph formats. There are also element qualifiers that test whether a list item is first, notfirst, last, notlast, and so on that apply numbering properties, so, for example, you can move a list element from the front or end or middle of a list to one of the other positions and the formatting will adjust. This is useful when the first and last list items need different space before/after and the first item needs to start at 1, or alphabetic equivalent.
I'm not using structure, so my suggestion may not apply in XML or DITA development. You can read about formatting rules in the Structure Applications Developer's Guide that you can find by clicking Structured Application Development in the Welcome Screen that appears when no document is open in FrameMaker 9 (can't remember 8).
HTH
Regards,
Peter
Peter Gold
KnowHow ProServices -
Excel to numbers problem,,, please help!!!
Hello
I am new to numbers (and excel) but someone made me a xls file, it works great on excel but I want to use it on my iPad with numbers, it calcs my breaks.. So I only have to put in the time I start and stop working.
The breaks are at
10:00-10:15
12:00-13:00
14:45-15:00
Could somebody look at the file and look what the problem is?
The file is: http://www.helpmij.nl/forum/attachment.php?attachmentid=123162&d=1299055986
I would be forever thankful if someone can make it work!
Hope to hear it soon!
Thanx!
Greets
iTrivi can send u the file by mail?
i currently dont have a computer to upload it, only ipad...
if u want to give it a look i'll send it to you -
Section/Page numbers problems
I have a document which I want the page numbering to start on the second page, ie. there is a title page which has no number, and then the second page has number one.
Reading through other posts about this, I have found that I have to add a section break in order to make this work, between the title page (1) and the real first page (2). But the problem is whenever I add a section break, it creates an entire blank page for the section break, so I end up with title page, blank page, real first page. Even if I have enough space, etc... every time I create a new section I get a blank page which I cannot type on or use, without deleting the section break and putting me back to square one.
Does a section break always do this (add a new blank unuseable page)?
Please, what can I do?
(required end of post rant: I switched from MsWord thinking pages would be so much more simple... but really, WHAT THE....? Just have it be a simple thing somewhere that allows the page (or section) to start at "0")klaply wrote:
Reading through other posts about this, I have found that I have to add a section break in order to make this work, between the title page (1) and the real first page (2). But the problem is whenever I add a section break, it creates an entire blank page for the section break, so I end up with title page, blank page, real first page. Even if I have enough space, etc... every time I create a new section I get a blank page which I cannot type on or use, without deleting the section break and putting me back to square one.
My guess is that an object is embedded in your title page which fools the tool cuttting the document in pages because on my machine, it works flawlessly.
You may activate the "Show Invisibles" function which may help to find if there is an odd character embedded.
Does a section break always do this (add a new blank unuseable page)?
NO, here it doesn't
Just have it be a simple thing somewhere that allows the page (or section) to start at "0")
It would not solve the problem because it would display the number 0 on the first page which is not what you want.
It would not solve the problem for those wanting a numbering starting on page 3 (or on page 4 …)
Yvan KOENIG (from FRANCE mardi 15 juillet 2008 17:40:19) -
Numbers problem by grouping datas
Hi, I have a problem with the newest Numbers. I can not find a way to grouping my Datas, as in Excel 2 seconds data/ subtotal in the Numbers I did not find. I have tried many different ways, but I can not use the buttons by arrange/ grouping. Anybody? Have anybody met this problem too before? How can I use the data grouping?
you can add a summary table that conditionally sums by catagory like this:
the table on the left contains the list of transactions (and need not be sorted). The table on the right is a new table that summrizes the information in the Data table.
For the table "Summary":
Column A contains the Category names and column B computes totals.
B2=SUMIF(Data::$B, A2, Data::$C)
this is shorthand for select cell B2 and type (or copy and paste from here) the formula:
=SUMIF(Data::$B, A2, Data::$C)
select B2 and fill down as needed -
Numbers - problem to open files with iPhone.
Hello! I have a problem to open a numbers file on Iphone. this file is made with Mac and use the function "SE". I understand tha t the problem is on a table where I use this function. If I delete this part I'm able to open with the Iphone. I try also to cut the expression on 2 different "se" but not work. I'have a dubt about the possibiliy of use the "se" function on the numbers on Iphone.
Someone have a problem like this? And find a soluction?
Can you help me?
Thanks
PaoloHi, I see your answer but I don't agree for 3 reasons:
1 - On numbers on mac the functions with ";" work good;
2 - I try to put the comma like your suggestion but the system show me an error on the formula with the red triangle
3 - I read another time the online help about the instruction and is correct the ";"
Follow I put a short screen-shot of the instruction help:
SE
La funzione SE restituisce uno dei due valori specificati a seconda che il suo risultato sia il valore booleano VERO o FALSO.
SE(se_espressione; se_vero; se_falso)
Thanks for your help but for the moments i follow to don't solve my problems.
bye
Paolo -
Numbers problem since update, type reverts or disappears.
I have had a problem since i updated numbers after 4.2 came out. I keep tract of sales and to make it easier I copy and paste like information and change the customers name. Now that column reverts to the previous customer that I chnged. If i don't copy and paste that column the typing just disapears. Its driving me crazy does anyone know about this?
I am also running into this problem, and after scouring thru the discussion boards I came across this thread:
http://discussions.apple.com/thread.jspa?threadID=2661263&tstart=15
If you look at radaines post on 12/5, 2:14 P.M., there is a workaround/solution to this. -
E72_SIM Card register fail problem
Dear All
I just buy nokia E73 about 1 week. It has a problem with my phone ,It push a message to notify that SIM card register fail. Since I use my phone 1 week , it notify every day that I solve it by turn off phone and turn on again after that it has a network. I can call out , if sim card register fail which I can not phone. If you have a solution to solve this problem,please help me too. I am not sure that it cause from SIM CARD or phone. It will update firmware again or not. I must go to Nokia shop to change phone or solve it ?????
VeenutI suggest you bring your device in for service and info.
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009 -
Hi Created one user define table of Document Type...
this table used to store some parameters..(Addon)
i uploaded nearly 200 parameters to that table using SQL bulk upload concept succesfully..
But as per sap the next document numbering will ( in NNM1 table) be 1 only for that table..
later while adding parameters manually through user defined screen(add-on) it shown error "
This entry already exist in table - ODBC error")
so i updated that next no value to 201 in NNM1 table ..
still its showing same error..
is there any way to solve this issue... i must upload using Bulk upload,later the client may add through screen..
( due to some problem in DTW for User defined Table i worked sql bulk upload method)
Regards,
Ganesh kHi Jane Jing,
i understood the problem..
my another doubt , as per Note 804685.. i uploaded all document type data successfully,
for document rows i had some problem..
for ex my two table name is @HEAD (document) @ROWS(document Rows)
sample data: @HEAD txt file contains following data:
Docentry DocNUm Field1
1 1 A
2 2 B
3 3 C
@ROWS txt file contains following data:
DocEntry Role
1 Stores
2 Purchase
3 Quality
there is no problem in document table.. but in rows table i got all row details under one DocEntry(that too final one)
Output:
DocEntry LineId Role
3 1 Stores
3 2 Purchase
3 3 Quality
please let me know my mistake.....
Regards,
Ganesh k -
ISE Authorization Policy Register Device Problem
Dear all.
I have some problem about register device in ISE. I have to check registered device before access the network. But in register device process. I don't like to install Native Supplicant or any program in the device . I need to register device only and check it again to access the network.
Can I reject the process of ISE about Native Supplicant after register device in the ISE System.
Thank You.
Toonthis is not supported,Supplicant (naive/NAC) can check the host registry, processes, applications, and services,can be used to perform Windows updates or antivirus and antispyware definition updates, launch qualified remediation programs, distribute files uploaded to the Cisco ISE server, distribute web site links to web sites in order for users to download files to fix their system, or simply distribute information and instructions.
-
Section endnote numbering problems
I had been numbering endnote consecutively throughout a long document - but then discovered that I had to change to numbering them by sections. I've put in section breaks and used the document inspector to instruct the program to start numbering again in each section - but that isn't happening - though the numbers sometime do change in the text, they do not in the endnotes. How do I fix?
klaply wrote:
Reading through other posts about this, I have found that I have to add a section break in order to make this work, between the title page (1) and the real first page (2). But the problem is whenever I add a section break, it creates an entire blank page for the section break, so I end up with title page, blank page, real first page. Even if I have enough space, etc... every time I create a new section I get a blank page which I cannot type on or use, without deleting the section break and putting me back to square one.
My guess is that an object is embedded in your title page which fools the tool cuttting the document in pages because on my machine, it works flawlessly.
You may activate the "Show Invisibles" function which may help to find if there is an odd character embedded.
Does a section break always do this (add a new blank unuseable page)?
NO, here it doesn't
Just have it be a simple thing somewhere that allows the page (or section) to start at "0")
It would not solve the problem because it would display the number 0 on the first page which is not what you want.
It would not solve the problem for those wanting a numbering starting on page 3 (or on page 4 …)
Yvan KOENIG (from FRANCE mardi 15 juillet 2008 17:40:19)
Maybe you are looking for
-
Lost Download: Error -208
Hi, I bought only my 2nd iTunes album and had issues. At first 4 cuts failed to download giving me the -208 error code. They remained in my "download" column and I was able to after repeated attempts (like 50!) to get 3 of them. I figured I get the l
-
What is the maximum level that a role can be resolved to?
hi folks can anyone tell me what is the maximum level at which expand role works. for example if i have a role which is then having 3 roles, each role has 2-3 users. will expand role work in this scenario? Also plz tell me why expand role does not wo
-
Where can I get software Updater for E63.. I have tried to download from nokia website but I couldn't find how to download.. I have downloaded flash player as per the instructions.. Now please tell me what I have to do next???
-
Interactive list musing abap query and how to create infoset records
hi, Can any one suggest how to create interactive list using ABAP Query .And also infosets and ranked list ..thanks in advance Regards, Raghu.
-
I have an I Mac and on it is Aperture one. i have all my photos on it. When I bought Snow Leopard, I could no longer use Aperture because it says i can't open it with Snow Leopard. Do I have to buy a brand new Aperture 3 or can i just download the m