Registered products disappeared after changing Adobe ID

Hello,
Today I logged into My Adobe. Under "My products", I saw my serial numbers for my 2 copies of Photoshop (CS4 and CS6).
I decided to update my Adobe ID to use a new email address. I went to My Preferences and changed my Adobe ID. Then, I re-logged in using my new email address. Unfortunately, my 2 serial numbers have now disappeared from "My products". It simply says "You have no registered products."
What's going on? How do I get my serial numbers back?
I found other users who experienced the same issue:
http://forums.adobe.com/message/6071864#6071864
http://forums.adobe.com/message/6107356#6107356
Thanks in advance for any assistance.

The products are registered to your original Adobe user ID. When your changed you account ID you may have created a new user ID which would have no Products registered to it.   If that is what happened your original user id should still be valid and have your registered products.  You can add your new e-mail address to that account as the  Alternate e-mail address. Try using you old Adobe ID.... If the works use it and don't mess with youy Adobe ID account name....
I had problems in the past my original Adobe ID was JJMACK not an email address.  Back in the PS3 time frame.  In layer years Adobe seemed to insist on a email id.  My account became unusable all my products were lost an I had to work with Adobe to recover my products. In the process PS3 and PS5 were lost forever but they're old and I may even have the CD and serial numbers.  I do not know if they would even run on Windows 7 and if they would only the serial in needed for they had no activation other then the serial.
My Adobe ID
Your Adobe ID (your email) is how you are identified on Adobe.com and gain access to your account.
Account Recovery Option
For easy online ID and password recovery assistance, please provide an alternate email address.
Alternate email address
You can see my accoumd no longer has PS 3 or PS 5 it did but has two CS 2 one listed as Photoshop 9 the other as CS 2 because of the change in activation servers.

Similar Messages

  • Issue with printing production order after changes through CO02

    Hi,
    Currently I have one issue with printing production order changes through CO02. If I go for print, all the operations are captured in printout. But after the print, if I add any new operations to this production order, and then go for print, its not capturing the newly added operations. Also, there is information popup coming "Copies will be printed for order. Original list already printed". This message effectively means, even after changes, when I go for print functionality, its just going for printing copies of original printed list.
    Can anyone help me out to get the newly added operations reflected in the print through CO02 ?
    Regards,
    Shiva

    Hi Shiva,
    Refer SAP note 28887.
    Source: http://www.sapfans.com/forums/viewtopic.php?f=9&t=308577
    Please search /google before posting queries.
    Regards,
    SuryaD.

  • The "File Edit View Window Help" menu disappears after opening Adobe Acrobat X Standard

    After installing Adobe Acrobat X Standard, when I run the program the "File Edit View Window Help" menu is visible for only a brief second then disappears.  I tried to press F11 or other functions keys to bring it back.  I also installed Adobe Acrobat X Pro which I also have a license for and it would do the exact same thing. Reinstalling the programs did not seem to resolve the problem.  Is there an issue inside the registry?

    Thank you for your comment.  However, F9 does not seem to work.
    When I press F9, the menu bar appears but the words "File Edit View Window Help" are still missing.  
    When I press F9 again the menu bar will close.
    This is a screen capture before the words "File Edit View Window Help" disappear.  After only about a second they are gone.

  • Pictures in iWeb albums disappeared after change location of original files

    I created many albums in iWeb by dragging albums from iPhoto. But then I noticed some pictures from my iWeb albums disappeared after the original pictures got removed to another location (or deleted). How can I tell iWeb to make a copy of the pictures in iWeb itself so my iWeb albums can stay the same even when i need to reorganize the original files on the hard drive?
    Any suggestions on how to restoring my albums in iWeb? I am having a bit headache now. Thank you very much!

    That is not normal behavior. The photos should stay in iWeb even if you delete them from iPhoto. Are you running a "referenced" library or a "managed" one?
    Click to view full size
    Managed is the default option. If you're running a reference library that may be the reason. If so contact Apple via http://www.apple.com/feedback/iweb.html and http://www.apple.com/feedback/iphoto.html.
    Unless you have a backup of your domain file predating the loss of the photos I don't know how you will recover the photos.
    OT

  • Register products you get off Adobe Creative Cloud

    I want to know how to register my products I got off the cloud download app. I have Photoshop CC 2014, Media Encoder, Adobe After Effects CC 2014 that l downloaded off the app. I want to know how I can find the 'serial number' to register the products in my account information I bought Adobe Photoshop Elements 12 and 10 and registered them when I got them, but I don't know how to find a 'serial number' to put in the section that saids Register new products.

    Ok because in your account it's has a place to register your product that's why I asked since it didn't ask me for any keys or serial numbers so when I downloaded the app a week ago I looked around but never found out anything. 

  • Config of CIP disappear after change IOS.

    Hi, folks!
    We have 7507 with two RSP16 and two CIPs (code cip27-22).
    After I change IOS of our 7507, from (RSP-JSV-M) Version 12.1(13)E1 to 123(11)T3, with sh run, we looked that our CIPs disappeared.
    The cfg of CIPs are in startup-config.
    After the change of IOS and did a reload or after I did turn off an turn on, does not return to running- config. The CIP cfg only return to cfg with the old IOS.
    I need to change the IOS because I would like to use GLBP feature.
    Exist any document/paper with method to change IOS of 7507 with CIP.
    What was my mistake?
    thanks,
    Renato

    Hi,
    when you change major ios versions you also need to change the corresponding cip microcode. If you go to 12.3T you need to use cip microcode 28. the current one is cip28-20.
    You can download it from cco. Try if this link works for you:
    http://www.cisco.com/kobayashi/sw-center/interworks/cip/
    the cip will only work if ios and cip microcode match. You need to copy the cip microcode into flash memory on the router and then reference the location and name in a statement similar like this:
    microcode CIP flash slot1:cip28-20
    microcode reload
    show microcode will also show you what the default cip microcode for this release is. You can see with this command what cip release you need. i.e cip 28, cip27...
    thanks...
    Matthias

  • My bookmarks bar w/zoom in/out feature disappeared after changing display, are they gone gone?

    Out of the blue my freemake video downloader app window opened to a size so lg it covered my taskbar + the "close" button & scrollbar were extended beyond desktop. It was unuseable I had to use ctrl+alt+delete to close it.
    I thought malware may've crawled onto me so I ran malwarebytes, it found a couple files (5-1-5.........)with a long string of #'s & a bunch of OpenCandy files-all were quarentined. No fix After going into display settings, changed themes, started, restarted . I replaced freemake w/a fresh copy.
    In all honesty I know not at what point my button w/arrows (side list of bookmarks I'd copied & pasted the url into (not the usual bkmks) and the toolbar w/zoom options were gone. I've located & opened FF profiles.default & it listed NO profile file in the entire FF Profile folder.. Any where else I might hunt for those separate bookmarks ? I read data, lotsa red underlining? Thank you

    '''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]''' {web link}
    While you are in safe mode;
    Press the '''<Alt>''' or '''<F10>''' key to bring up the tool bar.
    Followed by;
    Windows; '''Tools > Options'''
    Linux; '''Edit > Preferences'''
    Mac; ''application name'' '''> Preferences'''
    Then '''Advanced > General.'''
    Look for and turn off '''Use Hardware Acceleration'''.
    Poke around safe web sites and see if there is still a problem. Then restart.

  • Purchases disappeared after changing Country

    I've been using Indian iTunes A/c for making App & Book Purchases. But when I changed country to India, the Purchased Apps list in Purchased Option (in iTunes) disappeared it said "You do not have any purchased apps available to download".
    Please help me, coz I have many apps purchased...

    PLZ, i have the same problem!!!!
    did you fix it?
    PLZ tell me about this.

  • How come the pagedisplay toolbaricons keep disappearing after restarting Adobe Reader XI?

    While I'm using Adobe Reader XI I've noticed that my pagedisplay icons (fit width and fit page) in the toolbar aren't there. When I reset my toolbar (alt + f8) the icons pop up, but when I restart Adobe Reader they are gone again.
    Does anybody know how I can keep them locked onto the toolbar?
    Your help is very much appreciated...

    Do you have Creative Cloud subscription?  I don't think Creative Suites are a part of it, though I might be wrong - the individual applications in the suite, yes - the full suite as one item, no.  If you purchased CS6 Master Collection, not the Cloud, then you should be downloading that thru the following page...
    CS6 - http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html

  • Startup disk disappeared after changing HDD

    Hi all
    Recently i changed my original 160Gb fujitsu HDD from my Macbook to WD 500gb
    i cloned my original HDD to my current HDD using carbon copy cloner via USB
    and i switched the HDD
    during my 1st startup , there is a grey screen for around 20seconds before it starts to boot Mac OS
    so i think that there should be something wrong with the startup disk
    i went to system preferences -> startup disk to check
    and then there is only network startup available...
    May i know how to solve this problem?
    Thanks.

    Most likely you used CCC in Block level (block-for-block) Copy Mode.
    You should avoid Block Level Clones on GPT disks, use file level clones instead. CCC makes bootable
    file level clones that work trouble free. The problem rears its ugly head when you restore files to
    anywhere but the same exact drive and volume you copied them from. It causes incorrect infomation
    to be recorded into the GPT partition table headers.
    http://developer.apple.com/technotes/tn2006/tn2166.html#SECCOPYINGCONCERNS
    For file level clones always select "incremental backup of selected items".
    http://www.bombich.com/software/docs/CCCHelp/CCCHelp.html?page=clone
    The files and folders that are required by Mac OS X on the new drive must be copied to the new
    target volume using the "Incremental backup of selected items" cloning method, also leave
    the "delete items that don't exist on the source" box unchecked when restoring your clone.
    To correct the problem you may need to recreate your partitions on the new drive, then restore
    your clone to your new drive using the file level method.
    Kj

  • CS5 products registration for my Adobe ID

    Hello!
    I have lots of Adobe CS5 products installed on my Mac - Photoshop, Flashbuilder, Flash PRO, Dreamweaver, After Effects, Premier, Illustrator, but they are not registered to my account. When I try to register them as described on your site (through the help menu) I receive "Thank you" message, but nothing happens.
    I have no serials, as it was couple of years ago when I installed them.
    I would love to add them to my Adobe ID and have a discount for CC year plan. Can you please help?
    Kind regards,
    Alexandra

    You have no registered products. -- on my Adobe page
    An no disc, package nor e-mail.
    The only suitable option seems to find serial somewhere inside the program (is it even possible?) Or register them to my Adobe ID via Internet.

  • How to delete  old schedule time of process chain after changing

    I am try to change the schedule time of process chain on production but after changed the old schedule is still working (i.e. every day on 7 am I want change it to 6 am only) ,one process scheduled two time.
    I want only last changed. How to remove the older one?
    Thanks

    hmm wierd...one more thing check if this process chain get trigger by anyother process chain by some abap program or any.
    Check the table rspcchain to know if it has any meta chain or not. IF not follow the below steps :
    make your process chain trigger based upon the event. Follow the below step.
    1.SM64 ---> Create event -
    > come to your process chain -> maintain the start variant -> event base---> give that event name here.Now we will be require to create the job which will trigger this event for  this.
    2.Let us take the below PC as example;
    ZL_TD_HCM_004 -- This PC is running after event u2018START_ZL_TD_HCM_004u2019
    3.Go to T Code: SM36 Here we define the Background job which will be available in SM37 after saving it.
    4.It will ask for ABAP Program to be entered. Give it as Z_START_BI_EVENT and Select Variant from the list. (Based on Process chain, you can select it)
    5.Then select Start Conditions and give the start time of process chain. and select periodicity.
    6.Save the newly created job in SM36.It will be now available in SM37.
    This should solve your problem now .. have  fingure crossed
    Thanks,
    Deepak
    Edited by: Deepak Machal on Dec 14, 2011 8:20 AM

  • After installing Adobe Premiere Pro product CS6 in the program is not active PlayBack

    After installing Adobe Premiere Pro product CS6 in the program is not active
    PlayBack button setting when creating sequence.
    Windows 7 64-bit. Intel Xeon 2, RAM 12 MB. Mxo2

    Hi,
    Thanks for posting that screenshot. It appears that you have opened your Sequence Settings for a DV-NTSC sequence and have made a circle around the "Edit Settings" button.
    Since you chose to create a DV sequence, you cannot change those settings.
    Do you have DV NTSC clips? If so, these are the correct settings.
    If you do not have DV NTSC clips, do not be concerned. Just create the sequence.
    Once you drag a non-DV clip into the DV sequence, it's OK.
    You have the option of changing the Sequence Settings to match those of your clip in a new dialog box.
    Click "Change Sequence Settings" in the dialog box.
    I hope that helps.
    Thanks,
    Kevin

  • TOC Problem: Leader Lines disappeared after I've changed the font

    Hi,
    I am having a strange problem with Pages (I use the version in iWork 08). I am currently writing on my dissertation. I have used Helvetica while typing because it reads better on the screen. However, after changing the font to Georgia (for the final printout), my TOC got all messed up.
    First, I had beautiful leader lines that looked like this:
    Heading one ................. [page number]
    This was the default option. I did not change a thing. Then, after changing the font and the margins of the document, the leader lines disappeared and I could not get them back, even after setting them manually. Right now the entries look like this:
    Heading one [page number]
    ...which is very ugly.
    Any help is highly appreciated. I do not want to hand in the paper like this. (Also, switching the font back to Helvetica did not bring back the leader lines. This seems to be a strange bug in Pages.)

    Sounds to me as if the tab that the leader lines were attached to have been lost in your changed style, or have popped off the right hand margin. Leaders go with the tab which should be holding the right hand text in place. No tab, no leader.
    I have noticed a bug with tabs in Pages where if you have multiple tabs that should fit within a given space, the last one may not register and falls over to the next line.

  • My Adobe - all my previously registered product serial numbers are missing!

    I logged in to my adobe today using the same account I have used for years.
    I found that all my registered product serial numbers are missing.
    On previous log ins this list correctly showed all my adobe purchases.
    There must be about a decade's worth of purchased serial number now
    missing from this list.
    I had logged in to check my cs5.5 serial number in order to purchase a
    creative cloud subscription.
    However, finding all my details missing has put me off buying more products.
    Is the wiping of the data a temporary database problem at your end?
    or will this permanently affect my ability to upgrade products and services?

    Palaab wrote:
    …I contacted customer support and he asked for my serial number and then told me he can't help with this issue and I need to look in these forums for a solution…
    Most irresponsible, ignorant and unprofessional of that nincompoop who sent you to the forums for a customer service issue.
    Unfortunately, only Adobe customer service can assist you with your issue. These are user forums; you are not addressing Adobe here.  There's no one here who can help you.
    Click on the link below, and after that click on "Still need Help? Contact us."
    Then on the next page, click Chat
    There is also a phone option.
    http://helpx.adobe.com/contact.html?step=PHXS_downloading-installing-setting-up_licensing- activation

Maybe you are looking for