Registered Sign (glyph) not showing up in glyph pallet

I'm having trouble with the certain font (Quint) not having some glyphs show up in the Glyphs Pallet, in particular, the Registered Sign (® - the R inside a circle).
It show up in every other application on my system including Quark, Word TextEdit, Font Book and the Character Pallet.
Anyone have an idea why it would not show up in ID CS3?
Thanks-
Mac OS 10.4.11
ID CS3

Reset your prefs. If glyphs are still a problem, I would suspect ID doesn't like font book. I don't use it so I can't say for sure.
One way to test: copy one of the font families and place it into the font folder inside ID app folder. If you can now access the glyph, most likely ID doesn't play nice with font book. Again, I can't say for certain as I don't use font book.

Similar Messages

  • If I create a contact from my call register it does not show up in the contacts on my i phone but does show up in my i cloud contacts. Has anyone else had this happen?

    If I create a contact from my call register it does not show up in my contacts on my Iphone but does show up in my icloud. Has anyone else had this happen?

    Are you sure iCloud is turned on and that contacts is also turned on (Settings>iCloud) on the iPhone?  Be sure the iPhone is not set to Airplane Mode.

  • I can't delete photos from my iPhone the delete sign does not show

    i can't delete photos from my iPhone the delete bin sign does not show only the upload sign

    If the photos came from computer, you have to de-select on computer then do a sync to delete photos from iPhone.

  • Sign in not show as signed in and and watermark still on paid version 12

    After signing in under "help" tab it does not show as signed in and watermark is still on paid version.
    The adobe website shows that I have a Premier Elements serial number. I sat for 2 hours on hold with adobe chat with no results.
    I uninstalled the faulty program and swep the drive with a registry cleaner and reinstalled the program with the same problem.
    Running windows Vista
    I installed the program on the C:drive adobe folder with all the other adobe programs and its there, but also there is a adobe Premier Elements 12  folder in "Customers" "Documents" is this normal.
    The last time I had a instll problem was with Windows 3.0
    Tech support was better then.

    dclaver
    Your new thread constitutes a duplicate of a very recent thread
    http://forums.adobe.com/message/5965135#5965135
    Duplicate threads tend to be confusing for the person asking the question as well as the persons trying to help. I suspect a moderator should be along shortly to close this thread that we are in now and direct further replies to your issue to the original thread (link cited above).
    For now I will continue here briefly.
    1. What happened with the idea to explore the Event Viewer for Error relating to what appears to me to be an product activation issue?
    2. Have you contacted Adobe via its Adobe Chat to resolve this issue? Adobe is the only one who can resolve an activation issue.
    The link to use is the following:
    http://helpx.adobe.com/contact.html?product=premiere-elements&topic=signing-in-to-my-accou nt-or-registering-my-product
    When the link opens, click on "I still need help." to bring up the Adobe Chat.
    I have pre-set the topic for Serial Number Issues and Activating My Product.
    In Premiere Elements 12 Help Menu/Sign In Sign Out constitutes Activation and Deactivation respectively. I cannot see that Adobe can interpret that any other way.
    We will be watching for further developments.
    Thank you.
    ATR

  • HT201272 App store sign is not shows on my iphone. Where & how can I find & install it?

    My iphone does not shows app store sign & unable to down load of to upgrade any of the apps I have on my computer.  How & where can I obtain & install it. 
    Please help, Sue

    Check: Settings - General - Restrictions - Installing Apps = ???

  • My registered product does not show in my account

    I installed Acrobat XI Pro upgrade using the vendor supplied serial number and also registered the product. When I look at my onlibe account the product is not listed, and when I try to add it with the supplied SN, I am told to enter a valid SN.
    How do I add the product to my account?

    For whatever it's worth, I've had the same "problem."  I recently purchased PS Elements 12 through Amazon.  I installed it onto a new Windows 7 64 bit desktop from the Adobe DVD provided.  (There were no prior Photoshop installations on the machine, trial versions or otherwise.)  I entered the serial number enclosed in the product box during the initial set-up process.    When I opened the program for the first time after completing the set-up and rebooting, the Welcome screen advised me to register my product.  I had to first create an ID on Adobe to do so.   Once that was done, I followed the instructions under Your Registered Products to add Photoshop Elements 12, using the same product serial number entered previously.  The site accepted it, recognizing what the product was from the number.  A note advised me that the products list could take up to 30 minutes to update.  When I checked back a couple of hours later, however, it still showed that I have no registered products. I have repeated the registration drill twice with the same results.  Now, a couple of days later, it still shows I have no registered Adobe products. 
    Apparently my PS Elements 12 is properly activated, though you'd certainly never know that from looking at any of the info screens online or from anything that's displayed inside the open program itself.  I'm guessing that online activation and registration must be two entirely different things.  The program itself appears to be running flawlessly. 
    One thing I've picked up on from this is the importance of keeping a backup copy of your product serial number in a safe place.   You're probably not going to be able to log onto the Adobe site and recover from there later, if it happens to get lost. 

  • Sign Pane not showing

    I have an Acrobat Reader XI version 11.0.5 installed on my system. When I click on the sign pane I do not get the option to which would enable me to sign a document. Please could you help me enable this option.

    Adobe Reader does not include signing feature, only Acrobat does, unless you have a Reader-extended PDF whose permissions include signing. You can sign in reader Reader-Extended PDFs with signing permissions. Thta's why the signing options are grayed out.
    You can use Acrobat to Reader-extend a PDF, or other solutions, like Adobe LifeCycle (which is an expensive proposition).

  • ACS v5.2 - New Self Signed Certificate Not Showing In Browser

    Hi
    I have just renewed the self signed certificate on a v5.2 ACS and expiry date of 2013 is showing in the ACS GUI. However, when I start an ACS Admin session and view the certificate information in the browser it is showing the old expiry date of 2010. I have tried this in IE and Firefox and the certificate information is the same.
    Is there a way I can get the browser to pick the new certificate ?
    The screenshots show the difference (any advice would be appreciated)

    from the screen shots it does seem to be configured OK
    So I couple of suggestions
    - restart browsers / clear browser cache
    - if that fails consider a restart of ACS. Since this is certificate presented on web sessions maybe a restart of the web server is requried

  • Plus sign not showing up next to tabs (to enable opening of new tab).

    Plus sign not showing up next to tabs (to enable opening of new tab).
    Can I toggle a setting in about:config?
    Have turned off all add-ons, and re-started but plus sign did not show up. I am using FF4.0.1.

    Hi.
    I have fixed the problem.
    I was asked to "Restore Defualt Set" originally.
    After doing that, I wanted to "customize" the sidebar as there were a few toolbar items I wanted displayed.
    I found that the "Plus sign" is a "toolbar item".
    So I simply dragged it next to the right of the tab/s (up top) and dropped it. Now everything is back to normal, and I can open new tabs with the "Plus sign".
    Thankyou for all your help.
    I hope this answer can also help others at some time.
    All The Best.
    Michael Lindsay.
    Melbourne, Australia.

  • IPod not showing up at all on Mac but works fine on Windows?

    I've been searching for an answer on these discussion boards for hours and have not yet found any situation that was quite like mine and I'm getting a bit frazzled and worried.
    I have a 120GB iPod classic, which I've used for two years with an ACER laptop and it works perfectly. Two months ago, I switched to a Macbook Pro and synced my iPod with it; again everything worked fine. My iPod was synced with the Mac and all the new music had been transferred.
    Today, I've been trying to connect my iPod to my Mac but nothing happens. It only charges (and I can't even be sure that it IS charging because the charging green sign does not show up on the iPod). It does not show up in Finder, or in the iTunes source list; it does not sync. I've reset it a billion times, restarted my mac, switched USB cords and USB ports, even downloaded and installed every software update imaginable but nothing is working.
    If I leave the iPod connected to the Mac for a while, something even more alarming happens. It connects for around 3 seconds, and then ejects itself repeatedly. It's like watching someone go insane.
    Naturally, I freaked out and tried to connect the iPod to a PC and it is working perfectly on the PC. Please, someone help. I have no idea what's going on.

    Did you download and install the latest version of ITunes over the existing installation?
    http://www.apple.com/itunes/download/
    Be sure to try everything else mentioned in this article.
    iPod not recognized in iTunes and Mac desktop
    What if you connect the iPod in Disk Mode?
    Putting iPod into Disk Mode
    If the iPod is recognized okay on the PC, try restoring it there and then reconnecting it to your own laptop.
    B-rock

  • Why does iphone not show up in itunes

    After i connect my iphone to the computer the iphone-sign does not show in the itunes programme.
    The iphoto pops up, so it recognizes the iphone, but in itunes nothing happens.
    This means i connot syncronize my iphone.
    I tryed to restart imac and phone, nothing....
    Anyone had this problem an now's what to do??
    thanks
    Stephen

    http://support.apple.com/kb/TS1567
    http://www.apple.com/support/iphone/assistant/itunes/#section_1

  • Ipod is not showing up on itunes.. HELP!!

    I recently downloaded the newest version of itunes because a pop up came up and indicated I should. So I did, but now when I plug in my ipod to the USB port, the ipod starts charging, but now the ipod icon sign is not showing up under "source" and I am unable to update my ipod. It's as if itunes does not know the ipod is plugged in. What can I do??
    ipod mini 4GB   Windows XP  

    seen these?
    iPod not recognized correctly on Toshiba laptop
    iPod not recognized when connected to Windows laptop over USB
    Charging icon appears but not recognized by computer

  • ≥ does not show up in Dreamweaver

    If I enter the entiry ≥ into the code view, nothing
    shows up in the design view. Additionally, if I try to paste the
    actual character, say copied from wikipedia, it doesn't seem to
    paste anything. If I view the saved HTML, in a browser, it appears.
    If I copy/pasted the actual character (which is actually what I
    want, not entity) and view in Notepad, it works.
    Hopefully that makes sense. Basically, the
    greater-than-or-equal to sign is not showing up in Dreamweaver,
    either in code view or in design view, pasted as the actual
    character, and the entity code doesn't render in design view even
    though it appears in the browser. Any idea what is wrong?

    Hello,
    What font style to you have set in DW preferences?
    This Unicode character may not be available in the font you
    have set.
    As a test, Go to Preferences > Fonts.
    Select these:
    Font Settings: Western European
    Proportional Font: Times New Roman
    Fixed Font: Courier New
    Code View: Courier New
    Save, then look at the page in Design view again with this in
    the code:
    <h1> &ge;</h1>
    Do you see it now?
    Hope that helps,
    Take care,
    Tim
    "abeall" <[email protected]> wrote in
    message
    news:fn8r3o$l1n$[email protected]..
    > If I enter the entiry &ge; into the code view,
    nothing shows up in the
    > design
    > view. Additionally, if I try to paste the actual
    character, say copied
    > from
    > wikipedia, it doesn't seem to paste anything. If I view
    the saved HTML, in
    > a
    > browser, it appears. If I copy/pasted the actual
    character (which is
    > actually
    > what I want, not entity) and view in Notepad, it works.
    >
    > Hopefully that makes sense. Basically, the
    greater-than-or-equal to sign
    > is
    > not showing up in Dreamweaver, either in code view or in
    design view,
    > pasted as
    > the actual character, and the entity code doesn't render
    in design view
    > even
    > though it appears in the browser. Any idea what is
    wrong?
    >

  • My MacBook Pro was stolen last night. I need the serial number. It is not showing up on my devices list. My iPads and iPhones are. I have used it to to sync my phones and pads as well having it registered with apple. Any thoughts? Thanks

    My MacBook Pro was stolen last night. I need the serial number. It is not showing up on my devices list. My iPads and iPhones are. I have used it to to sync my phones and pads as well having it registered with apple. Any thoughts? Thanks

    Click here: https://supportprofile.apple.com/MySupportProfile.do
    SIgn in with your Apple ID, the same one you used to access this support forum.
    Hopefully, you will see a list of all the devices you registered with your Apple ID, including their serial numbers. Let me know how this works out.
    Edit to add: If you enabled "find my imac" on your Pro, you ought to be able to remotely lock it, or even wipe its memory. Click http://www.icloud.com/ sign in with your Apple ID and click the big green "find my iPhone" icon (nevermind the name, it will find all your devices provided they're running Lion or iOS 5).
    Then file a police report and nail the b*****d.

  • Glyph not mounting or being recognized my MacBook???

    Hello,
    I have a Glyph external hard drive that, all of a sudden, is no longer being recognized by my computer. I does not show up in the system profiler nor in disk utility. It connects using firewire. I have connected my digital camera via firewire recently and it was recognized. I have also connected this hard drive to another (newer) mac and it has no trouble recognizing it. So it's seems that it is not the firewire jack in my computer that is problematic nor is in the actual cable. Any suggestions? I don't even know where to start as a i have nothing to work with.
    Thanks in advance.

    anyone?

Maybe you are looking for