Registered with incorrect date of birth when first turn iPad on

Hi please help, I registered with the incorrect date of birth when first turned on the iPad, and now when I try to register to set up a iPad account the systems keeps saying can't register as date of birth does not meet age requirement even though putting in the correct dob. Please advise how can I change the original set up dob details. Thanks

Read this for the instructions.
http://www.ehow.com/how_8493711_change-birth-date-itunes.html

Similar Messages

  • I have a first generation touch with OS3.1.3.  When I turned it on yesterday and tried to connect to Wi-Fi;  It says choose a Network, but none display.  If I hit "other", nothing shows; it won't even recognize my home network.  Help!

    I have a first generation touch with OS3.1.3.  When I turned it on yesterday and tried to connect to Wi-Fi;  It says choose a Network, but none display.  If I hit "other", nothing shows; it won't even recognize my home network.  Help!   This has never happened before!

    Nothing is grayed out.  It just doesn't want to find any networks.  Usually, a whole list appears; mine is at the top.  It tries to connect less than 2 seconds and just stops...nothing appears.

  • HT1766 When I turn iPad on I get a box that says Not Enough Storage and neither the Closeor Settings buttons do anything. The iPad turns off on its own. It is full charged.

    When I turn iPad on I get a box that says Not Enough Storage and neither the Closeor Settings buttons do anything. The iPad turns off on its own. It is full charged.

    Try this.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up

  • Camera is coding photo with incorrect date-how do I adjust?

    My iPhone, as well as my MacBook are set to the correct date and time, but when I import photos from the phone, they are coded with a date 1 year in the future. (e.g. photos today are marked 12/31/08). Because of this, they are not showing up in the album Last 12 Months. How can I fix this? Thanks.

    I encountered the same thing on photos I took New Year's Eve around 8 pm US Eastern time. And actually, it seems that they were not just one year, but also two hours advanced. However, photos I took BEFORE New Year's Eve were correctly dated.
    I just took another photo to check it out. It came across completely right — 1/1/08 around 22:00 Eastern.
    Was this the first time you had used the camera on your iPhone (maybe a Christmas present like mine)? If not, did photos from earlier dates import correctly?
    You posted at 3:55 pm in what was presumably your local time. What is your time zone? Is it possible that you took your photos after midnight 1/1/08 in UTC/Greenwich time?
    I fixed my photos by doing a batch date change in iPhoto. Click on "last import" or maybe an event that shows 2008 dates. Then hit command(Apple)-A to select all the photos. and then pull down the Photos menu and select "Adjust Date and Time...". You adjust using the date on the first photo, and iPhoto will apply the same time change to all.
    Note to Apple: this is a nasty little issue, don't let it fester! Fix the iPhone's encoding of the operating system date and time on JPEG photo captures on these "cusp" dates.
    Good luck,
    Andrew

  • IDoc with incorrect data is expected to fail but it  does not

    Hi All,
    The Job CQM_CR_O_IF103_IN_INOVIS_ORDER3 got cancelled as result of a short dump. In the initial investigation we found that the IDoc 0000000012089824 had an incorrect information i.e. it had a material which did not
    exist. The IDoc is expected to fail and give an error message but has not done so.
    We also observed the IDoc does not fail when the incorrect materialhappens to be the last material in the IDoc.
    The workaround was to fail the IDoc manually and then the subsequent jobs runs successfully.
    Would like to know why the IDoc is not failing when it has incorrect
    data.
    Thanks & Regards,

    Hello,
    the idoc fails only if there is a hard error in the segment, means i.e. if there is a wrong transaction type or missing ... But I think that the system behavior is correct, because the idoc cannot fail because a product is "just" wrong. This is no hard error, you should then get an error in the transaction that i.e. the product does not exists. You can try to use badi CRMXIF_ORDER_MAP to check the products, but then please make sure that note 1644057 is implemented.
    BR
    Rene

  • IDoc with incorrect data is expected to fail but does not

    Hi All,
    The Job CQM_CR_O_IF103_IN_INOVIS_ORDER3 got cancelled as result of a short dump. In the initial investigation we found that the IDoc 0000000012089824 had an incorrect information i.e. it had a material which did not
    exist. The IDoc is expected to fail and give an error message but has not done so.
    We also observed the IDoc does not fail when the incorrect materialhappens to be the last material in the IDoc.
    The workaround was to fail the IDoc manually and then the subsequent jobs runs successfully.
    Would like to know why the IDoc is not failing when it has incorrect
    data.
    Thanks & Regards,

    Hello,
    the idoc fails only if there is a hard error in the segment, means i.e. if there is a wrong transaction type or missing ... But I think that the system behavior is correct, because the idoc cannot fail because a product is "just" wrong. This is no hard error, you should then get an error in the transaction that i.e. the product does not exists. You can try to use badi CRMXIF_ORDER_MAP to check the products, but then please make sure that note 1644057 is implemented.
    BR
    Rene

  • Dirive "date of birth" when ID number is entered

    Hi,
    I need to create a form in Adobe Livecycle Designer 8, where if the ID number field are entered, the date of birth field gets filled with the corresponding birth date.
    Can anyone help me with the script?
    Regards,
    Chris Fourie

    Is the date of birth part of the ID like in the Florida, Illinois and Wisconsin Drivers Licenses or are the DOBs stored in a tab delineated text file or an SQL database.
    If in the ID just do the math, if it is in any text file LC Designer can not do it - look at Acrobat Forms, and if in an SQL database, including MS Access and MS Excel Named areas, you will have to create a data connection and then execute SQL commands to retrieve the data by the ID.

  • I am not able to view the default view of FF 4.0, It is showing menu bar with the windows border. When i turn off menu bar, the strip which should be present above the tabs goes missing.

    I have recently downloaded FF 4.0 and using a lot of add-ons. I am not able to view the default view of FF 4.0 with no menu bar. Even after turning off the menu bar from customization, I am able to see only the tabs and FF button, but not the strip over the tabs.

    When you hide the menu bar to display the Firefox button, the titlebar (strip above the tabs) is only displayed if the Firefox window is not maximized. If you always want the Window titlebar, you can use the Firefox 4 UI Fixer extension - https://addons.mozilla.org/firefox/addon/firefox-4-ui-fixer

  • Why isn't there video clipping with iOS 5.1 on a first gen iPad?

    I have a first gen iPad and can find no way to clip (simple) a video. iMovie can't run, okay. So why isn't there even the usual, simple edit tool in the photo interface? It's ridiculous ... If the ultimate answer is either jailbreak or upgrade, then why buy Apple going forward?

    rawstock wrote:
    I have a first gen iPad ....... why buy Apple going forward?
    I also have a 1st gen and, I imagine unlike you, I just can't recall Apple as ever having advertised or promoted it as the perfect platform for video editing .. or, for that matter, ever having addressed that issue at all. I can't think of any apps that would have been able to do that sort of thing before the advent of the iPad2, either; why would there have been, seeing as how the 1 lacked a camera?
    I have no idea if any of the video editing apps now in the Store will work on the '1' model, but wouldn't be too surprised if they did not. There has to be a miniscule market for that.
    Ah well. You've made up your mind about not buying Apple in the future, right? I really have no interest at all in trying to change your mind.

  • HP G42-475DX Black Screen when first turning on.. Caps Lock light blinking.. HELP!

    The subject pretty much sums it up..
    I go to turn on my laptop 2 days ago.. and my computer pretty much took a crap.. I would like to fix it myself without having to go and pay for repairs.. On top of that I had ordered a new laptop for college that is already on it's way so I would really not like to pay for repairs.. I have several Recovery disks that BestBuy gave me when I had purchased my laptop from them. I try to put a disk in.. and nothing happens the screen is still black. When i turn it on it doesn't even show the HP logo either... HELP ? Please! Thanks! 

    Hi,
    Please try a hard reset and see if it works.
    1. Power off your laptop
    2. Remove the a/c adapter, battery and everything that is attached to your laptop.
    3. Hold the 'POWER 'button down on your laptop for about 10 seconds.
    4. Plug in the a/c power supply (without battery) and power on.
    Also plese chack the following link:
        http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01443366&cc=us&dlc=en&lc=en&jumpid=reg_R1002_US...
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Shouldn't i see apps when i turn ipad on

    just got my ipad....have an itunes acct..when i turn on ipad all i have is a circle that says itunes and a cable but can't get any apps

    Connect your iPad to your computer with the cable that came with the iPad and launch iTunes on your computer.
    The iPad must be activated via iTunes on your computer and that is the message that is appearing on the screen when you turn on the iPad.

  • Mail won't rotate when I turn iPad sideways

    Ever sense I downloaded new OS I can't get my mail to rotate wheni rotate my iPad. Very frustrating because now I must go through each one where before I could see all of them
    Help

    I had the exact same issue. Solution is just to shutdown and then restart your iPad. It should work after that. If not, then check the rotation setting in mail:
    Open Mail
    Double-tap the Home button to bring up the multitasking bar
    Swipe the bar to the left
    Tap the circle/arrow icon to unlock or lock the screen rotation (a lock appears when locked)

  • Incorrect data value selected when clicking on slicer entry in Excel Services

    We have uploaded various Excel 2013 files containing pivot tables to Sharepoint 2013 and viewed the pivot tables in a browser. The referenced pivot table data is normally a SSAS tabular model. This has been working fine for over 12 months apart
    from one irritating feature.
    Sometimes a clicked slicer entry does not result in the correct slicer value being selected. This typically occurs after using the mouse scroll button to scroll down a list of entries in a slicer. When using the keyboard arrow keys to highlight a slicer
    value and pressing Return to select an entry, the correct value does always seem to be selected - so it appears to point to a mouse scrollwheel issue. Also, after scrolling through slicer entries using the mouse scroll wheel, there appears to be some sort
    of slicer refresh problem that results in a blank entry/entries being displayed either at the top or bottom of a slicer. However, sometimes the correct 'tooltip' is shown for this blank slicer entry. One other point - when using the slicer scrollbar the scroll
    down a list of slicer entries using Firefox, the problem does not seem to occur. IE does not seem to display the same type of slicer scrollbars (only active when the mouse hovers over the slicer) and so this is more difficult to replicate in Ie.
    The worrying factor is that the user is often unaware that the incorrect slicer value has been selected. The problem can be replicated in both IE11 and Firefox. Also our client systems accessed via Citrix display the same problems.
    Any help greatly appreciated. Thanks.
    Graham Goodwin Email: [email protected]

    Hi Graham,
    i built the same version, please correct me if should your environment, is sharepoint 2013 with march 2013 update and your office also the same update. in my labbox seems the issue is not re-producible.
    after some discussion with my colleague, seems there was issue similar like this back in 2010 Excel and the remedy is to update the excel services and to re-install the power pivot at SQL server. back then the issue is because when we scroll the selection,
    it should be locked, so then when we scroll it may have the position to update and refresh the data. one of the workaround is by clicking the item and press enter, by doing this it will refresh the page correctly. the link was:http://www.microsoft.com/en-us/download/details.aspx?id=29074
    i tried to look at our update for the excel services 2013, there are updates in every cumulative updates but there is no particlular update regarding this issue, perhaps you may try this to check in your development environment, if should it may fix the
    issue.
    to re-install the power pivot, you may need to do this on your sql side.　
    http://technet.microsoft.com/en-us/library/ee210708.aspx
    http://technet.microsoft.com/en-us/library/ee210671.aspxi may suggest you to check the ULS log, if should there are issues with powerpivot also, to make sure if should there are no issue
    regarding power pivot. if there is no issues on the powerpivot, then you may need to open a ticket to report this issue, so that we can have a detailed checking to your environment remotely.
    Regards,
    Aries
    Microsoft Online Community Support
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • Issue with format: date dd-MMM-yyyy - First letter lower instead of capital

    Hi colleagues,
    I am facing a problem using: <?format-date:FIELD_NAME;’dd-MMM-yyyy’;'UTC'?> on my RTF template.
    When the report run on English it retrieves: Apr, Jun, ...
    but in French it retrieves: apr, jun.
    The client wants the first letter of the month in capital letter I thought that MMM is the format to manage it...
    I am using XML Publisher with PeopleSoft.
    The template is in French and using bursting I create the report in different language depending on some parameters.
    When I preview the template everything is ok.
    Does anyone knows where is the Abbreviate Name of the Month comes from?
    Thanks in advance,
    Juan Diego

    Hi Juan
    It ought to be returning 'Arv' not 'apr' in French right?
    It might be an issue with the i18n library that is being shipped. I would suggest logging a service request with support for some help.
    Regards
    tim

  • I have a new IPAD4 which has synced pictures i selected but not music or films i selected from itunes library? I have had an account for years and never had issues syncing with iphone or ipod? when i attempt ipad the data shows and it cycles but nothing?

    show the data shows whe i selet for sync (i have ticked sync only ticked icon) and selected two playlists - the data usage shows an extra 3.2 gb off my 32g ipad and the movies show up purple on the data usage bar, i press apply / sync it takes 20mins to go through 5 stages - never once do i see a song title or number in the update display. then when it finishes the data usage bar goes back to the lower amount before i tried to add the music and movies to my ipad?? The only thing that i have managed to move if pictures??
    Im confused, ive always got on fine with moving, updating and syncing my iphone, ipod touch, have done this the same way but NO music or films
    when i go through the summary section it says i have selected 757 songs (off two playlists) and i movie (from a digital copy via itunes), they show in usage bar b4 sync but then after sync nothing! i have tried both wi fi sync and normal, i have the lastest updates and CANT FIGURE THIS OUT
    When i set up the ipad out the box the other day it asked whether i wanted a NEW INSTALL or RESTORE FROM ICLOUD BACKUP (presumbly off iphone), I choose restore, it then downloaded all the apps and web history/bookmarks etc, although it took about 8 hours to do it which i thought was odd?!
    Ive spent £500 on this and if i cant put my msuc or movies on it that makes it a very exspensive web browser, APPLE this should be easier .......! please help - im no techno noob beither grand master, just your average user so im sure people might know what to do... i freakin hope so!

    ps when syncing it jumps through steps 1 - 4 real fast, i seem to remeber iphone showing the number of tracks transferring and names, but i see nothing? then it sits on 5 saying "waiting for changes to be applied"

Maybe you are looking for