Registering dotmatrix printer in 11.5.10.2

Hi,
so far I installed and configured Hp laserjet network printers...they are working fine.But this is first time, I am installing and configuring dot matrix printers for checks printing in 11.5.10.2 instance..
do I need to take any precautions for dot matrix printers ????

Hi hussein,
for AR Invoice Printing in 11i and R12..what supported model of Dot Matrix Printer you will suggest? in EPSON??

Similar Messages

  • PDF output generated by XML Publisher is not printing in Dotmatrix Printer

    Hi All,
    We have designed a template for a particular concurrent program to print it's output format in PDF. The concurrent is running fine and it has produced the output in PDF format. But we are unable to take a printout of the output in our Dotmatrix printer (Epson FX2175). We configured PASTA driver as per the Metalink Note ID: 739186.1. By using this Configuration we are able to take printout in our hp LaserJet 1320 printer. But not able to take printout in Dotmatrix printer. If anybody faced the same problem and find a solution please share here. Any help would be appreciated.
    Thanks in Advance,
    Regards,
    PLS
    Edited by: user10088016 on Oct 31, 2008 9:41 PM

    Hi,
    I have a similar issue, where the output is coming with some junk characters while printing to the printer. I contacted my System Administrator regarding the PASTA driver being installed on the printer and it is already done, but I am still having the issue.
    I am trying to print it from the Bursting control file, using following command : <xapi:print id="LOCALPRINT" printer="ipp://192.168.1.73:9100" copies="1" />
    Can anyone help me out on this.
    Thanks and Regards,
    Sumanth

  • Printing is very Slow on DotMatrix Printer

    Hi,
    I need to print the report directly on locally attached printer without appearing the printer selection screen. For this I implement the following code
    SET_REPORT_OBJECT_PROPERTY(report_id, REPORT_COMM_MODE, SYNCHRONOUS); SET_REPORT_OBJECT_PROPERTY(report_id, REPORT_EXECUTION_MODE, RUNTIME); --- BATCH, RUNTIME
    SET_REPORT_OBJECT_PROPERTY(report_id, REPORT_DESTYPE, PRINTER);
    SET_REPORT_OBJECT_PROPERTY(report_id, REPORT_DESFORMAT,'PDF'); --- 'html'
    SET_REPORT_OBJECT_PROPERTY(report_id, REPORT_SERVER, 'repserver');
    SET_REPORT_OBJECT_PROPERTY(report_id, REPORT_OTHER,'paramform=NO');
    After execution , it gives the error " FILE DOES NOT BEGIN WITH '%PDF'
    but when I simply use
    SET_REPORT_OBJECT_PROPERTY(report_id, REPORT_DESTYPE, FILE);
    Report is open in PDF format successfully.
    1) How can I take the output directly on the printer.
    2) How report can be taken fast on DotMatrix Printer,
    ( when if I take the print out from the PDF generated reports on only DotMatrix Printer it takes huge time, not the other laser printer. )
    Kindly Help me
    Regards.
    Priya

    I am printing to a R2400 with the same issue. I have everything up to date software, firmware, etc. I just updated to OS 10.4.5 and this actualy increased the speed by about 25% but it's still slower thtn should be expected.

  • Issue in Printing Smartforms through Dotmatrix Printer

    Hi,
    I have a Smartform which has many tables. When I print it through a Laser printer it comes out fine. But when I direct it through the Epson 2090 a 24 pin head dotmatrix printer some lines in the tables are not getting printed.
    May be it's that there is no room for printing line. What will be the best solution for this?, What's the best Font & Unit of Measure I should use? Or Anyother solution?
    Thanks,
    Kishan

    Hi,
    I have a very similar problem to the original posting.  I have a SAPScript form that print fine on a HP Laser Jet printer.  But we cannot get it to print correctly on a Epson DOT Matrix.  We tried two different models and get the same bad results.  The print size is smaller on  the DOT matrix even though I am using the following printer initialization
    # set  to 10 CPI
    0x1B0x50
    # select LQ quality
    0x1B0x780x01
    # select non-proportional spacing
    0x1B0x700x00
    # set left margin to 0
    0x1B0x6C0x00
    # set right margin to 85
    0x1B0x510x85
    # cancel bottom margin
    0x1B0x4F
    It is also printing a hex value on the first line and has top, side, and botton margins of about 3/8 inch  So apparently, it is ignoring the printer initialization.  Note, I had also tried the same initializations using \e in place of the Epson Escape hex value \0x1B
    Message was edited by: Bob Ackerman

  • Different btn dotmatrix print and laser print

    hello sap experts
    how can i print my pld report in dotmatrix print and what is the difference btn dotmatrix print anda laser print
    thanks in advance
    regards
    Jenny

    Hi,
    Incase of dot matrix printers only limited printers are supported by sap b1 like Epson - FX890,Citizen ProDot 30,Epson FX880.
    Refer note:724904 for instructions printing in sap b1using dot matrix printers.
    More over you have to set the alignment(as often it gets changed).
    And as most of the dot matrix use continuous printing sheets,it would be a tedious job to make the PLD alignment.
    Whereas in case of laser printer you can easily do the alignment as it would in A4 size.
    I suggest you to go for laser printer if it is affordable by client.

  • How to register a Printer In Apps

    I am trying To run the Report of Oracle Finanicle But
    it Gives The error Printer Inilization error
    Please Tell how to Register a Printer and What is style and drive Relation

    In addition :
    TEMPLATE.fmb should be used for creation of custom form for APPS, the form is located in $AU_TOP/forms/US. Also you need to copy the corresponsing pll that you want to use from $AU_TOP/resource.
    For more details please take alook at Oracle Application Developer's Guide :
    http://download-east.oracle.com/docs/cd/B25516_11/current/acrobat/115devg.pdf
    Please look at chapter 1 , page 17 and chapter 27, page 8.
    HTH

  • I have trouble trying register my printer... i get this message: appecberror: ecb request failed: er

    Hello! I have hp 3050A printer end i have trouble trying to register... I get this message: 
    AppEcbError: ECB request failed: Error: code='900' description='[SF_ERR_202]ystem exception; 10.55.25.193-08.24.2012-128310'. WHY????

    I wil need a little more information in order to help out. Is this an error message you are receiving at eprintcenter.com? You are trying to register/sing up for ePrint services and not just register the printer?  What browser are you  using to access the web site? Have you tried registering though a different browser?  Have you tired clearing the cache and the browsing history on that browser? 
    I am a former employee of HP...
    How do I give Kudos?| How do I mark a post as Solved?

  • Register my printer

    i cant register my printer as it wont take my postal code. it keeps asking for my zip i am in canada . now i have lost the form.
    No too computer literate

    What printer model do you have?
    If my reply helped you, feel free to click on the Kudos button (hover over the "thumbs up").
    If my reply solved your problem please click on the Accepted Solution button so other Forum users may benefit from viewing the post.
    I am an HP employee.

  • Page advancing problem in dotmatrix printing

    Hi Experts,
    We are trying to print 6 X 2 Inch sticker using dotmatrix printer in smartforms,
    For this I have defined a page formate assigned it to Device type and under the initialization written the following code
    reset
    \e\0x40
    set line spacing 6 LPI
    \e\0x32
    set page length to 2 inch (=12 lines at 6 LPI)
    \e\0x43\0x0C
    print is coming properly in one sticker ie, 6 X 2.
    but after printing it is advanding 4.5 sticker, How can I stop this page advancing ?
    Note : sticker is in continuous roll.
    Regards
    Bikas

    Hi Bikas,
    We are facing similar issue with a custom page format created in SAP (9.5" x 7").
    Issue Details – While printing the Smartform output on Line matrix printer, the printer ignores the page format assigned in the device and takes more page break than expected. Looks like it considers Letter/DINA4 page format instead of the custom format designed.
    We are using SAPWIN device type and assigned the custom page format to the device type. We are not seeing any difference even after implementing the similar code mentioned above in your thread in "Print Initialization" action.
    Please provide your inputs in this regard.
    Thanks,
    Surya

  • DotMatrix Printing from CR

    I'm Using Crystal Report XI R-2 And VS.Net 2005 for my Development.
    I need to provide   Invoice Printing on Dotmatrix Printer.
    Kindly advise me how to take fast printing on Dotmatrix.
    Awaiting ur kind help.

    The .NET framework only supports True-Type fonts. When exporting to text there is no font information stored so it is a true pure-text document that the printer can use its internal fonts to print out.
    However when exporting to text font information is retained and as the true-type font is probably not your printer font the printer will take longer to print it. Even if you select your printer font for the fields in Crystal, if it is not a true-type font supported by the framework it will be substituted at runtime for a true-type font.
    This unfortunately is out of our control as it is the way the .NET framework behaves.
    Trevor

  • Print-control commands for dotmatrix printer

    dear all,
    Here my requirement is we are using datamax printer ( dotmatrix printer) for printing script and i need some commands for that.
    please reply soon.
    thanx inadvance

    Hi Don
    Thank's for your reply.
    That's excactly what we want to do: within the same report we'll use different trays and/or number of copies.
    In the meantime, we talked to the manufacturer of the ELP module. They told us that the print stream contains parts of the correct sequence, but unfortunately the trailing two closing paranthesis are missing. For that reason, the command string is not recognized as valid command and is therefore printed "as is".
    We tried to add additional characters after the trailing paranthesis, again no success...
    The next step is to use the newer CR runtime, as Nikhil suggested in his answer.
    Weird problem...
    Regards
    Daniel

  • Where do i register my printer

    How do i register my printer and where do I register the IP adress for ePrint

    Hello bknoop,
    Here is a link that should help with both of your questions:
    Setting up ePrint on your HP ePrint printer
    If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

  • Unable to Register new printer

    I purchased a new printer (Officejet 6500A Plus) and registered it on ePrint with no problem initially.  After registration, I noticed that I could use my facebook account as my login so  I deleted my earlier account and logged in using Facebook but since then, I have been unable to register my printer (invalid code).  I believe it thinks my printer is still attached to my earlier account but that account no longer exists.
    I have disabled and re-enabled Web services on my printer and reprinted my address.  I have also powered my printer down and back up.
    The printer works otherwise ... I am able to connect to the internet and use existing installed apps to obtain content.  I just am unable to set up my printer with an allowed user email list.

    The email address you get when you reprint your info sheet is valid for 24 hours - have you been trying to add your printer to your account within that time period after printing the info sheet? 
    Have you verified that you are getting a new email address when you remove/re-enable web services?  
    Last, but not least, (sorry, have to ask) are you sure you're typing the new email address accurately in the add printer dialog? 
    Just to confirm, the sequence of events was: 
    1. Enable web services
    2. Create ePC account
    3. Add printer 
    4. Delete ePC account
    5. Remove/re-enable web services on printer and print web services info sheet 
    6. Try to add printer within 24 hours of printing info sheet
    Is that correct?   
    Have you tried removing/re-enabling web services and printing the info sheet to try to add the printer to your account more than once? 
    Thanks!
    I am an HP employee.

  • Smartform - Borders are not appeari when iam printing in DOTMATRIX Printer.

    Hi,
    I have Created a Smartform. When iam taking printout in Deskjet, borders & Line spacing
    is comming Correctly. When i try to Print using the Dotmatrix borders & Lines are not
    appearing.
    Regards
    Praveen

    Hi,
    Check the assigned page format to your custom device type. Try to assign all the page format which are available for
    HP*** which you gives you desired result.
    Regards,
    Vamshi.

  • Updating a register and print only the updated portion

    Hi,
    I have a scenario where I need to update a register. The register is a pdf form (Acro Form) and I am updating it via a swing application that I have developed.
    When I first create the register, the user will print it and file it for his records. Subsequently, the user might need to update the register. I fill up more fields programmatically on the pdf and now when he prints it, he will supply the already the existent register sheet that he had printed and filed earlier, to the printer, and only the line that was updated should be printed on the correct slot.
    Is this possible in java? I don't mind replacing the pdf with say an excel sheet or html if that can solve this problem.
    Can anyone provide me with any links that I can read up on for this?
    Thanks
    Sethu

    Hi,
    No I cannot expect the clients to have that sort of a printer, unfortunately. A thought struck me yesterday, I am basically using a pdf that has fillable fields (Acro Forms). This I am programtically filling in JAVA. That is simple enough to do using the itext library.
    Initially, the first time I print that sheet, I am basically printing a table. What if I have 2 sets of this pdf, once that has the table border, header, etc and the other pdf will only have the form textfields. The textfields in the second pdf will be in the same position and have the same dimension as the original. Only that the second pdf will be devoid of all other printable characters like table borders, etc and will only have the text fields. I will now populate only the form fields that pertain to the entries that need to be added, so that only that gets printed out.
    Since its a pdf, the specification says it looks exactly like how its going get printed. So I am guessing, this should work. If I make the textfield dimension a bit bigger, so that even if the printer during feeding doesn't align it perfectly, it wouldn't be too bad. Again, if the user feeds it incorrectly, nothing can be done about it. He will need to issue a fresh print of the sheet.
    Any thoughts on this? Its a bit tedious to do.. but what the hell.. give it a shot?
    Sethu

Maybe you are looking for