Registering Elements for a club

Hi; Does software have to be registered to a person, or can the user be a club or society?
We have a user - chair@clubname - can we set up a club user using that address?
Thanks
Bob

I'm not Adobe Staff, so don't assume this is official Adobe policy, but I don't see why not as long as all of the EULA is respected, particularly:
-use on only one machine at a time
-the club owns the machine

Similar Messages

Is it possible to place symbols in a tab of a register element?

Is it possible to place symbols in a tab of a register element (see attached VI for demonstation)?
E.g. when a error occurs on tab "Status" the red X might appear to notify the user.
For what is property node "Register content" (in German "Reiterinhalt"...) used for?
The VI is done with LV2009.
Solved!
Go to Solution.
Attachments:
Tab_and_Symbols.vi ‏9 KB

This document shows how to do what you're looking for.
Jim
You're entirely bonkers. But I'll tell you a secret. All the best people are. ~ Alice
Attachments:
Tab_and_Symbols[1].vi ‏13 KB

Fetch Top level WBS elements for delivery type LP

Hi everyone,
we are working on a delivery analysis report and we are in progress of fetching sales order number for deliveries with delivery type LP.
How we are doing?
so we are fetch the UP values from PRHI table for the wbs elements in LIPS.
Now we need to fetching the top level wbs elements from PRHI table by passing the UP values to the same table until the UP field value becomes initial.
Then fetching the corresponding sales orders from the VMPA table for the wbs elements from PRHI table for the value of corresponding UP field is initial.
So it is going through so many iteration to fetch the UP value again and again until it is initial.
What we need?
So if someone can suggest a FM or method to fetch the top level WBS element for the given WBS element from LIPS table will be of great help.

Hi,
Try FM
'BBP_PS_PROJECT_GET_LIST
'BAPI_PROJECT_GETINFO

Two Cost Element for the same GL

Hi,
We have 2 Company Codes - 1000 & 2000. We are using same CoA in both the Company Codes. We have a GL, say 12345678 for posting short/excess amount. So during MIRO, the accounting entry would be:
GR/IR a/c dr.          10,000
GL 12345678                  2
                   Vendor            10,002
GL 12345678 would be dr or Cr would depend on short/excess amount.
We have created Cost Element for this GL 12345678. If I post the MIRO without attaching a Cost Center to this Cost Element system thows an error to attach the Cost Center. I have separate Cost Center for Company Codes 1000 & 2000 however I can only put one Cost Center in this Cost Element.
Can anyone advice how can I post the above mentioned entry with different Cost Center. This line item (GL 12345678) is generated automatically and the Cost Center field is greyed out hence I don't have option to enter the Cost Center during MIRO. I checked the FSG of this GL, Cost Center field is 'Optional' over there.
Thanks,
Sandy

Solution Option* -You can assign Differant Cost Centers to Company Code 1000 and Company Code 2000 in OKB9 Transaction Code.Follow the below process....
--- Go to OKB9
--- Select New Entries button
--- Give the Company Code 1000 in first row and 2000 in 2nd row
--- Enter the Cost element 12345678 for company code 1000 and 2000
--- Enter the relevent cost centers for company code 1000 and 2000
--- Select Save
Thanks
Fit 4 Nothing

How to add a new data element for existing table filed(Primary key field)

Hi Experts,
How to add a new data element for existing table field(Primary key field)
For this filed ther is no foreign key relation ships and even check table.
while activating table it is giving message like below.
can you help any one to solve this and wil steps to add new dataelement for existing primary key filed of a table.
Check table (NAMING SPACE/TABLE NAME(EX:/TC/VENDOR)) (username/19.02.10/03:29)
Primary key change not permitted for value table /TC/VENDOR
Check on table /TC/VENDOR resulted in errors
Thanks
Ravi

Hi,
Easiest way is to download the table eg into an Excel table (if possible) or text table. Drop the table from the database. Build your table with the new key field. Build the database table again and fill it.
You can do it also over the database into a new table. Drop the old one. Build the enhanced one and fill it. Afterwards drop your (temporary) table.
Maybe there are other ways, but this works.
Success,
Rob

Adobe elements for Mac and CS5 for Mac

Hi, I have two full licenses for photoshop, one for elements and one for CS5. Would it be possible for me to swap the Elements 8 (mac version) for Elements 8 for PC. I want to teach my son to use Elements for his college work, while he has a PC and I have a mac. I bought the Elements for a course that only used Elements but quickly as I moved on I had to use full CS5. I can't remember if I used the elements serial number to upgrade to CS5, where I should have CS4 serial number.

Hi,
As per adobe policy on cross platform swap : http://kb2.adobe.com/cps/405/kb405819.html.
"You can swap only current versions. If you have a previous version, you cannot swap to a different platform or language of the previous version--instead, it's necessary to upgrade."

Had a windows computer with my element 7. Now just bought a Mac OSX version 10.9.2 what would be the best photoshop elements for this machine. I did download elements 12 from Apple store but kept getting incompatible message when trying to open a phot

I thought elements were simple but maybe it is just me. Having problems moving photos from iphoto to elements

Duplicate post; see:
had a windows computer with my element 7. Now just bought a Mac OSX version 10.9.2 what would be the best photoshop elements for this machine. I did download elements 12 from Apple store but kept getting incompatible message when trying to open a phot

Creating an Element for an XML Document

Assuming I have an XML file
file.xml
<root>
<child1>
<child2>
<child100>
<root>
i do
SAXBuilder parser = new SAXBuilder();
doc = parser.build(file);
root = doc.getRootElement();This returns a root elemnet for the entire tree.Now my question is how do i create a root element for say jus the top 10 children? That is, is there a way i can create a document just reading the first 10 elements from the file tree above so that when i do a getChildren on root I should have only 10 elements in the list.

| 1. How are the attributes of an XML element can be stored to the database
XML SQL Utility (which XSQL uses under the covers) only stores
documents in the canonical format. You'll need to use an XSLT
transformation to transform data into the canonical format
(including transforming attribute values into elements whose
names correspond to the column in which you'd like to store it)
| 2. How can I store a single XML document to multiple database tables?
I outline several techniques for this in my upcoming
O'Reilly book, "Building Oracle XML Applications".
The basic idea is to either:
(1) Use an Object View with an INSTEAD OF INSERT trigger, or
(2) Use a technique that transform the inbound document
into a multi-table insert-format and passes each
relevant part for insert to the XML SQL Utility separately.
null

Data elements for IDoc Segments to non-SAP system

Hi,
I need to create IDocs for transferring data to non-SAP system. When I create segmet fields should I create new data elements for all the fields with attributes specific to receiving system? Because there are many fields where the field attributes of SAP system do not match the corresponding fields of receiving non-SAP system.
Thanks in advance!!
Regards,
Sriram

Hi Sriram,
When I create segmet fields should I create new data elements for all the fields with attributes specific to receiving system
Is it custom segments .
Regards,
Madhu.

I have just installed Photoshop Elements for a MAC. MY photos were in iPhoto, I have 47,000 pictures and my drive on my Mac laptop is not large enough. I store my photos in iPhoto on an external drive. Can I store all my photos on an external drive when u

I have just installed Photoshop Elements for a MAC. MY photos were in iPhoto, I have 47,000 pictures and my drive on my Mac laptop is not large enough. I store my photos in iPhoto on an external drive. Can I store all my photos on an external drive when using Photoshop Elements? If so, in what format should they be stored in? I do I move them from iPhoto to the new storage location? How do I call them up in organizer? And how do I call them up to Edit? I do not want to store any pictures on my Apple Mac laptop. I want to store pictures on several external devices.

Yes you can store images on an external hard dive and have them referenced in Organizer. It’s best to export copies to separate folders/subfolders and that will ensure iPhoto does not get corrupted.
Alternatively you could continue to use iPhoto with the Elements Editor set up in the iPhoto prefs as your external editing app. Then there is no need to use Organizer and no need to duplicate your images.
You can then call up photos directly from iPhoto as normal with the additional option e.g.
Double-click on a thumbnail to edit in iPhoto editor.
Control (right) - click on a thumbnail to edit in the elements app.
http://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-iphoto-mac-os.html

I have Ps CS4. I run Apple OS X 10.9.5 on a new MacPro 3GHz 8-core Intel Xeon E5 - 64 GB.    I hardly ever use CS4 ( preferring Elements for my low level needs), but I now want to use it's function for stitching together a landscape. I fire it up and g

I have Ps CS4. I run Apple OS X 10.9.5 on a new MacPro 3GHz 8-core Intel Xeon E5 - 64 GB.    I hardly ever use CS4 ( preferring Elements for my low level needs), but I now want to use it's function for stitching together a landscape. I fire it up and get Error 150:30 with the suggestion to contact you - hence this message

I have Ps CS4. I run Apple OS X 10.9.5 on a new MacPro 3GHz 8-core Intel Xeon E5 - 64 GB.    I hardly ever use CS4 ( preferring Elements for my low level needs), but I now want to use it's function for stitching together a landscape. I fire it up and get Error 150:30 with the suggestion to contact you - hence this message

Report Painter Drilldown on Cost Element for Project Systems

I am currently working on a report for Project Systems. I am trying to copy the functionality of the Internal Order summary (60I2-001) into report group 6P3. I was able to copy the whole layout and also the values of 6oI2-001 into a copy of 6PP4-001 but when I double click on "Balance" it is bringin up the ALV report that 6PP4-001 is using. I would like to call another report which looks like 6LS0-001 but contains Project System info made in report painter when I double click on Balance. Is this possible? Please let me know how.

Hi Avinash,
See my replies below.
1 a & B: You are planning Qty on NWA and capturing costs - labor & Equipment on NWA elements.
When you are having elaborated to NWA-Element level, split your total work on each NWA-element and post labor cost. Thus you will have planned Vs actual costs at one place.
coming to equipment cost - are you capturing using PO through GR?.
2.a : Option1- create a separate WBS elements for materials and plan cost at WBS level. That value would be your total planned cost of material procurement as estimated. Under this WBS elements create NWAs and assign the materials. With this set up you can assign material and procure so that will have actual costs coming from GR.
Option 2: Create a one General Cost activity and assign the total planned cost of material on this NWA.
When you assign the material components, diligently you have to reduce the equivalent amount from the general costs activity. Also note that on component screen, you have to check box "Cost relevant" so that material cost will add to Cost NWA. Let the different materials have their own valuation class and have default CEs accordingly. that would not be big issue.
Please discuss with your MM team to get more information. Also my suggestion is to leave blank CE field in configuration.
The option2 is very cumbersome and high risk but one have to be very cautious to reduce the value from Cost NWA in order to sustain the planned material costs whenever they added.
3. I have answered the relevance of Cost relevance check box in above.
Hope above makes sense.
Thanks,
Sudhakar

I had purchased Adobe Premiere Elements along with Adobe Photoshop Elements for my MacBook Air

I had purchased Adobe Premiere Elements along with Adobe Photoshop Elements for my MacBook Air OSX Mavericks. Due lack of space I had to reiinstall OSX and could not retirieve from Seagate Back-up drive software in workable condition. Options please?

yehudaleib
All you should have to do is to go to the Adobe web site http://www.adobe.com.
Sign in with your Adobe ID and Password.
Then go the web page's Search field and type in "My Orders".
Follow the "My Orders" link to your orders, find the order corresponding to the version in question.
There should be an opportunity there to download a new set of installation files.
Do you have your purchased serial number? If not, I am not sure if it will be included in the "My Orders"
area. But, it should be in the "My Products" which you can access from the Search field. Click on the
name of your product in "My Products", and the serial number should be revealed.
Please let us know the outcome.
Thank you.
ATR

Editing iMovie files with Adobe Premiere Elements for Windows

Hi,
My 12 year old asked for Final Cut Pro for Christmas to edit movies he takes on his iPod touch and iPad. However, he has a Windows-based desktop. As I understand it, Final Cut Pro is not a Windows-based program. I thought we could get him Adobe Premiere Elements for Windows, but will he be able to manipulate his iMovie files easily? I have no idea what format the iMovie files are. Will he be able to download them to his Windows desktop, edit his movie, and then upload back to his Apple devices? Thanks!

clue
Bottom line: Making distinction between video editor project files and formats of exports.
Details...
The iPod touch and iPad typically offer video files H.264.mov or H.264.mp4 formats. This is not a Mac versus Windows matter because we are talking exports (.mov and .mp4) not project files from a video editing project.
He should be able to take his iPod or iPad device videos and edit them in Premiere Elements. And, then he should be able to return them to his device(s).
But, many of these devices record video with a variable frame rate (depending on the lighting conditions to a great extent). Premiere Elements (any version) can have problems with such video to the extend (a) out of sync audio (b) cannot import file at all. I have a iPod Touch 4th Generation and have no Premiere Elements importing/editing/exporting problems with my 1280 x 720 @ 30 progressive frames per second (H.264.mov) video from that iPod.
Below is an excerpt of Premiere Elements 13 exports that might be of interest...
Android Phones and Tablets (NEW)
There are 7 presets in this new Android Phones and Tablets category. Each has Advanced Button and Share Work Area Bar Only opportunities. The names of the 7 Android Phones and Tablets presets are
MP4 - 1080p 25
MP4 - 1080p 29.97
Android Tablet - 1280 x 800 25
Android Tablet - 1280 x 800 29.97
MP4 - 720p 23.976
MP4 - 720p 25
MP4 - 720p 29.97
Apple iPod, iPad, iPhone
In going from 12 to 13, there are now 8 presets instead of 16 for the Apple iPod, iPad, iPhone category. Each preset has Advanced Button and Share Work Area Only opportunities. The names of the 5 presets are
Apple TV, iPad, iPhone4 - 720p25
Apple TV, iPad, iPhone4 - 720p29.97
Apple TV, iPad, iPhone4 - 1080p25
Apple TV, iPad, iPhone4 - 1080p29.97
Apple iPad 2,3,4, Mini; iPhone 4S, 5, 5S; Apple TV 3 - 1080p 23.976 NEW
Apple iPad 2,3,4, Mini; iPhone 4S, 5, 5S; Apple TV 3 - 1080p 25 NEW
Apple iPad 2,3,4, Mini; iPhone 4S, 5, 5S; Apple TV 3 - 1080p 29.97 NEW
Removed preset names are
Apple iPhone, Apple iPod Widescreen Low Quality
Apple iPhone, Apple iPod Widescreen Medium Quality
Apple iPhone, Apple iPod Widescreen High Quality
Apple iPhone, Apple iPod Standard Low Quality
Apple iPhone, Apple iPod Standard Medium Quality
Apple iPhone, Apple iPod Standard High Quality
Apple iPad Widescreen Low Quality
Apple iPad Widescreen Medium Quality
Apple iPad Widescreen High Quality
Apple iPad Standard Low Quality
Apple iPad Standard Medium Quality
Apple iPad Standard High Quality
The ideal way would be to look at the tryout of Premiere Elements 13 before purchase. If not possible, then, if purchased from Adobe direct, there
should be an opportunity for money back within 30 days of purchased. If purchased from an authorized reseller, then the refund/return would be according to the policy of the retailer.
Please let us know if you are OK with the above information. If you need more information, please do not hesitate to ask. If clarification on anything that I have written is needed, please let me know.
Thank you.
ATR

I am with a university and i purchased the adobe photoshop elements for a faculty member of mine, how can he download it when it is in my name but he is the one needing it?

i am with a university and i purchased the adobe photoshop elements for a faculty member of mine, how can he download it when it is in my name but he is the one needing it?

There is nothing to prevent him from downloading and installing the trial version (Adobe - Download free trial version Adobe Photoshop Elements 12 | Adobe). At the point all you need to do is provide him with the serial number so that he can activate it. If the intent is that he be the owner of the software then you might want to see about transfering the license...
Transfer an Adobe product license

Registering Elements for a club

Similar Messages

Maybe you are looking for