Registering iPod nano - Session timed-out even though already registered

Having purchased a new iPod nano, when connecting it to iTunes I received the screen to register the nano with the options to Never Register, Later or Continue. I chose Continue but received the message 'Your registration session timed-out'. I registered through apple.com but now every time I connect the iPod I get this same screen and always the same 'Your registration session timed-out' message. Can anyone help me get past this screen ?

Actually, I've got this working. I had already tried resetting my Nano (take a look at the ipod support page at http://www.apple.com/support/ipod/ and lookup how to reset your ipod ) before and nothing doing.
However, the other day, I resetted it again and now my Nano is working fine! I got the 'registration' page and I selected 'Never Register' (although I have already done so via the web site) and can now update my Nano properly. I wonder if I didn't reset it properly last time - I can't think why else it didn't work last time. Ah well, try resetting and see what happens.
iMac Intel Core 2 Duo 2.16 Ghz (20")   Mac OS X (10.4.8)  

Similar Messages

  • I am having problems downloading ios 5 update as it gets right to the end it then says my internet has timed out, even though it hasnt .  Any ideas?

    I am having problems downloading ios 5 update as it gets right to the end it then says my internet has timed out, even though it hasnt .  Any ideas?

    This is a common issue and a solution could have been quickly found by doing a search.
    Disable any Anti-Virus and Firewall software on the computer, then run the update.

  • Songs do not show up on my ipod nano gen. 6 even though they do when connected to itunes on my taptop

    When my ipod nano gen 6 is plugged into itunes, it shows there are songs present. When disconnected, NO songs show up on nano. I've restored and updated the software. HELP?
    PS - Called Apple and they won't help unless I pay $29.95!

    Try resetting.

  • HT201210 when updating it gives me an error message about my network timing out even though it never did?

    I've been trying to update my phone but every time it takes me like 20min and at the end it says that "the update could not be completed because my network time out and for me to check the network connection"  I do have wifi and it never turned off during the updates can some one help please!!

    If you can't restore it in recovery mode then you'll have to try DFU mode to restore it (see
    https://discussions.apple.com/thread/2648467?threadID=2648467&tstart=0 or http://www.iclarified.com/entry/index.php?enid=1034).

  • ACS 1121 error 5411 EAP session timed out w/Peap Wireless logins

    I am having issues that came up in the last month where all of my wireless client devices (using 4400 WLC and AC 1121 Appliance w/Active Directory integration) using PEAP MSCHAP2 are being prompted multiple times one after another for their userid/password. 
    This is very intermitant with clients sometimes being able to authenticate on the first try and later in the day getting prompted 20 times for authentication before it works.  This affects all brands of laptops/tablets/smartphones and other devices. 
    My ACS log files show an error of 5411 EAP session timed out. 
    I have had a TAC case open for over a month but they still haven't found a solution.
    Has anyone run into this and have any thoughts?  I have already increased my timeout on the controller from the default 2 seconds to 8 seconds but the delay between prompts asking for authentication credentials on clients is less than a second.
    What do you think? 
    Jim

    We are running 5.2.0.26.11 on the ACS engine and 7.0.240.0 on the WLC's.  The certificate on the ACS was expired, but for over a year without issues prior to about a month ago (our clients do have the verify certificate box unchecked).  I did renew the certificate on the ACS (self signed, just told it to renew) but that didn't help. 
    The only thing the clients get are multiple prompts for authentication usually a second or 2 apart even though my timeout on the WLC is set to 8 seconds.  A debug on the WLC shows the following.  Any ideas on what could be the issue? 
    (Cisco Controller) >*dot1xMsgTask: Jun 18 11:07:16.318: 00:27:10:c9:91:2c Sending EAP-Request/Identity to mobile 00:27:10:c9:91:2c (EAP Id 8)
    *osapiBsnTimer: Jun 18 11:07:17.317: 00:27:10:c9:91:2c 802.1x 'txWhen' Timer expired for station 00:27:10:c9:91:2c and for message = M0
    *dot1xMsgTask: Jun 18 11:07:17.318: 00:27:10:c9:91:2c dot1x - moving mobile 00:27:10:c9:91:2c into Connecting state
    *dot1xMsgTask: Jun 18 11:07:17.318: 00:27:10:c9:91:2c Sending EAP-Request/Identity to mobile 00:27:10:c9:91:2c (EAP Id 9)
    *osapiBsnTimer: Jun 18 11:07:18.317: 00:27:10:c9:91:2c 802.1x 'txWhen' Timer expired for station 00:27:10:c9:91:2c and for message = M0
    *dot1xMsgTask: Jun 18 11:07:18.318: 00:27:10:c9:91:2c dot1x - moving mobile 00:27:10:c9:91:2c into Connecting state
    *dot1xMsgTask: Jun 18 11:07:18.318: 00:27:10:c9:91:2c Sending EAP-Request/Identity to mobile 00:27:10:c9:91:2c (EAP Id 10)
    *apfLbsTask: Jun 18 11:07:18.319: 00:27:10:c9:91:2c Copy AP LOCP - mode:0 slotId:1, apMac 0x0:1c:b1:6:ee:a0
    *apfLbsTask: Jun 18 11:07:18.319: 00:27:10:c9:91:2c Copy WLAN LOCP EssIndex:2 aid:1 ssid:NPT-SECURE
    *apfLbsTask: Jun 18 11:07:18.319: 00:27:10:c9:91:2c Copy Security LOCP ecypher:0x0 ptype:0x2, p:0x1, eaptype:0x6 w:0x1 aalg:0x0, PMState: 8021X_REQD
    *apfLbsTask: Jun 18 11:07:18.319: 00:27:10:c9:91:2c Copy 802.11 LOCP a:0x0 b:0x0 c:0x0 d:0x0 e:0x0 protocol2:0x1 statuscode 0, reasoncode 99, status 3
    *apfLbsTask: Jun 18 11:07:18.319: 00:27:10:c9:91:2c Copy CCX LOCP 4
    *apfLbsTask: Jun 18 11:07:18.319: 00:27:10:c9:91:2c Copy e2e LOCP 0x1
    *apfLbsTask: Jun 18 11:07:18.319: 00:27:10:c9:91:2c Copy MobilityData LOCP status:0, anchorip:0x0
    *osapiBsnTimer: Jun 18 11:07:19.317: 00:27:10:c9:91:2c 802.1x 'txWhen' Timer expired for station 00:27:10:c9:91:2c and for message = M0
    *dot1xMsgTask: Jun 18 11:07:19.318: 00:27:10:c9:91:2c dot1x - moving mobile 00:27:10:c9:91:2c into Connecting state
    *dot1xMsgTask: Jun 18 11:07:19.318: 00:27:10:c9:91:2c Sending EAP-Request/Identity to mobile 00:27:10:c9:91:2c (EAP Id 11)
    *osapiBsnTimer: Jun 18 11:07:20.317: 00:27:10:c9:91:2c 802.1x 'txWhen' Timer expired for station 00:27:10:c9:91:2c and for message = M0
    *dot1xMsgTask: Jun 18 11:07:20.318: 00:27:10:c9:91:2c dot1x - moving mobile 00:27:10:c9:91:2c into Connecting state
    *dot1xMsgTask: Jun 18 11:07:20.318: 00:27:10:c9:91:2c Sending EAP-Request/Identity to mobile 00:27:10:c9:91:2c (EAP Id 12)
    *osapiBsnTimer: Jun 18 11:07:21.317: 00:27:10:c9:91:2c 802.1x 'txWhen' Timer expired for station 00:27:10:c9:91:2c and for message = M0
    *dot1xMsgTask: Jun 18 11:07:21.318: 00:27:10:c9:91:2c dot1x - moving mobile 00:27:10:c9:91:2c into Connecting state
    *dot1xMsgTask: Jun 18 11:07:21.318: 00:27:10:c9:91:2c Sending EAP-Request/Identity to mobile 00:27:10:c9:91:2c (EAP Id 13)
    *osapiBsnTimer: Jun 18 11:07:22.317: 00:27:10:c9:91:2c 802.1x 'txWhen' Timer expired for station 00:27:10:c9:91:2c and for message = M0
    *dot1xMsgTask: Jun 18 11:07:22.318: 00:27:10:c9:91:2c dot1x - moving mobile 00:27:10:c9:91:2c into Connecting state
    *dot1xMsgTask: Jun 18 11:07:22.318: 00:27:10:c9:91:2c Sending EAP-Request/Identity to mobile 00:27:10:c9:91:2c (EAP Id 14)
    *osapiBsnTimer: Jun 18 11:07:23.317: 00:27:10:c9:91:2c 802.1x 'txWhen' Timer expired for station 00:27:10:c9:91:2c and for message = M0
    *dot1xMsgTask: Jun 18 11:07:23.318: 00:27:10:c9:91:2c dot1x - moving mobile 00:27:10:c9:91:2c into Connecting state
    *dot1xMsgTask: Jun 18 11:07:23.318: 00:27:10:c9:91:2c Sending EAP-Request/Identity to mobile 00:27:10:c9:91:2c (EAP Id 15)
    *osapiBsnTimer: Jun 18 11:07:24.317: 00:27:10:c9:91:2c 802.1x 'txWhen' Timer expired for station 00:27:10:c9:91:2c and for message = M0
    *dot1xMsgTask: Jun 18 11:07:24.318: 00:27:10:c9:91:2c dot1x - moving mobile 00:27:10:c9:91:2c into Connecting state
    *dot1xMsgTask: Jun 18 11:07:24.318: 00:27:10:c9:91:2c Sending EAP-Request/Identity to mobile 00:27:10:c9:91:2c (EAP Id 16)
    *osapiBsnTimer: Jun 18 11:07:25.317: 00:27:10:c9:91:2c 802.1x 'txWhen' Timer expired for station 00:27:10:c9:91:2c and for message = M0
    *dot1xMsgTask: Jun 18 11:07:25.318: 00:27:10:c9:91:2c dot1x - moving mobile 00:27:10:c9:91:2c into Connecting state
    *dot1xMsgTask: Jun 18 11:07:25.318: 00:27:10:c9:91:2c Sending EAP-Request/Identity to mobile 00:27:10:c9:91:2c (EAP Id 17)
    *osapiBsnTimer: Jun 18 11:07:26.317: 00:27:10:c9:91:2c 802.1x 'txWhen' Timer expired for station 00:27:10:c9:91:2c and for message = M0
    *dot1xMsgTask: Jun 18 11:07:26.318: 00:27:10:c9:91:2c dot1x - moving mobile 00:27:10:c9:91:2c into Connecting state
    *dot1xMsgTask: Jun 18 11:07:26.318: 00:27:10:c9:91:2c Sending EAP-Request/Identity to mobile 00:27:10:c9:91:2c (EAP Id 18)
    *osapiBsnTimer: Jun 18 11:07:27.317: 00:27:10:c9:91:2c 802.1x 'txWhen' Timer expired for station 00:27:10:c9:91:2c and for message = M0
    *dot1xMsgTask: Jun 18 11:07:27.318: 00:27:10:c9:91:2c dot1x - moving mobile 00:27:10:c9:91:2c into Connecting state
    *dot1xMsgTask: Jun 18 11:07:27.318: 00:27:10:c9:91:2c Sending EAP-Request/Identity to mobile 00:27:10:c9:91:2c (EAP Id 19)
    *osapiBsnTimer: Jun 18 11:07:28.317: 00:27:10:c9:91:2c 802.1x 'txWhen' Timer expired for station 00:27:10:c9:91:2c and for message = M0
    *dot1xMsgTask: Jun 18 11:07:28.318: 00:27:10:c9:91:2c dot1x - moving mobile 00:27:10:c9:91:2c into Connecting state
    *dot1xMsgTask: Jun 18 11:07:28.318: 00:27:10:c9:91:2c Sending EAP-Request/Identity to mobile 00:27:10:c9:91:2c (EAP Id 20)
    *osapiBsnTimer: Jun 18 11:07:29.317: 00:27:10:c9:91:2c 802.1x 'txWhen' Timer expired for station 00:27:10:c9:91:2c and for message = M0
    *dot1xMsgTask: Jun 18 11:07:29.318: 00:27:10:c9:91:2c dot1x - moving mobile 00:27:10:c9:91:2c into Connecting state
    *dot1xMsgTask: Jun 18 11:07:29.318: 00:27:10:c9:91:2c Sending EAP-Request/Identity to mobile 00:27:10:c9:91:2c (EAP Id 21)
    *dot1xMsgTask: Jun 18 11:07:29.318: 00:27:10:c9:91:2c Reached Max EAP-Identity Request retries (21) for STA 00:27:10:c9:91:2c
    *dot1xMsgTask: Jun 18 11:07:29.318: 00:27:10:c9:91:2c Sent Deauthenticate to mobile on BSSID 00:1c:b1:06:ee:a0 slot 1(caller 1x_auth_pae.c:3121)
    *dot1xMsgTask: Jun 18 11:07:29.319: 00:27:10:c9:91:2c Scheduling deletion of Mobile Station:  (callerId: 6) in 10 seconds
    *dot1xMsgTask: Jun 18 11:07:29.319: 00:27:10:c9:91:2c dot1x - moving mobile 00:27:10:c9:91:2c into Disconnected state
    *dot1xMsgTask: Jun 18 11:07:29.319: 00:27:10:c9:91:2c Not sending EAP-Failure for STA 00:27:10:c9:91:2c
    *spamReceiveTask: Jun 18 11:07:29.979: 00:27:10:c9:91:2c Received Idle-Timeout from AP 00:1d:71:0a:de:70, slot 1 for STA 00:27:10:c9:91:2c
    *spamReceiveTask: Jun 18 11:07:29.979: 00:27:10:c9:91:2c Warning, ignore the DELETE_MOBILE_PAYLOAD from AP: 00:1d:71:0a:de:70, slot 1. STA connecting AP: 00:1c:b1:06:ee:a0, slot 1
    *apfMsConnTask_0: Jun 18 11:07:30.834: 00:27:10:c9:91:2c Association received from mobile on AP 00:1d:71:0a:de:70
    *apfMsConnTask_0: Jun 18 11:07:30.834: 00:27:10:c9:91:2c 0.0.0.0 8021X_REQD (3) Changing ACL 'none' (ACL ID 255) ===> 'none' (ACL ID 255) --- (caller apf_policy.c:1633)
    *apfMsConnTask_0: Jun 18 11:07:30.834: 00:27:10:c9:91:2c Applying site-specific IPv6 override for station 00:27:10:c9:91:2c - vapId 2, site 'none', interface 'management'
    *apfMsConnTask_0: Jun 18 11:07:30.834: 00:27:10:c9:91:2c Applying IPv6 Interface Policy for station 00:27:10:c9:91:2c - vlan 0, interface id 0, interface 'management'
    *apfMsConnTask_0: Jun 18 11:07:30.834: 00:27:10:c9:91:2c STA - rates (8): 140 18 152 36 176 72 96 108 0 0 0 0 0 0 0 0
    *apfMsConnTask_0: Jun 18 11:07:30.834: 00:27:10:c9:91:2c Processing RSN IE type 48, length 22 for mobile 00:27:10:c9:91:2c
    *apfMsConnTask_0: Jun 18 11:07:30.834: 00:27:10:c9:91:2c Received RSN IE with 0 PMKIDs from mobile 00:27:10:c9:91:2c
    *apfMsConnTask_0: Jun 18 11:07:30.834: 00:27:10:c9:91:2c pemApfDeleteMobileStation2: APF_MS_PEM_WAIT_L2_AUTH_COMPLETE = 0.
    *apfMsConnTask_0: Jun 18 11:07:30.834: 00:27:10:c9:91:2c 0.0.0.0 8021X_REQD (3) Deleted mobile LWAPP rule on AP [00:1c:b1:06:ee:a0]
    *apfMsConnTask_0: Jun 18 11:07:30.834: 00:27:10:c9:91:2c Updated location for station old AP 00:1c:b1:06:ee:a0-1, new AP 00:1d:71:0a:de:70-1
    *apfMsConnTask_0: Jun 18 11:07:30.834: 00:27:10:c9:91:2c 0.0.0.0 8021X_REQD (3) Initializing policy
    *apfMsConnTask_0: Jun 18 11:07:30.834: 00:27:10:c9:91:2c 0.0.0.0 8021X_REQD (3) Change state to AUTHCHECK (2) last state 8021X_REQD (3)
    *apfMsConnTask_0: Jun 18 11:07:30.834: 00:27:10:c9:91:2c 0.0.0.0 AUTHCHECK (2) Change state to 8021X_REQD (3) last state 8021X_REQD (3)
    *apfMsConnTask_0: Jun 18 11:07:30.834: 00:27:10:c9:91:2c 0.0.0.0 8021X_REQD (3) DHCP Not required on AP 00:1d:71:0a:de:70 vapId 2 apVapId 2for this client
    *apfMsConnTask_0: Jun 18 11:07:30.834: 00:27:10:c9:91:2c Not Using WMM Compliance code qosCap 00
    *apfMsConnTask_0: Jun 18 11:07:30.835: 00:27:10:c9:91:2c 0.0.0.0 8021X_REQD (3) Plumbed mobile LWAPP rule on AP 00:1d:71:0a:de:70 vapId 2 apVapId 2
    *apfMsConnTask_0: Jun 18 11:07:30.835: 00:27:10:c9:91:2c apfPemAddUser2 (apf_policy.c:223) Changing state for mobile 00:27:10:c9:91:2c on AP 00:1d:71:0a:de:70 from Associated to Associated
    *apfMsConnTask_0: Jun 18 11:07:30.835: 00:27:10:c9:91:2c Stopping deletion of Mobile Station: (callerId: 48)
    *apfMsConnTask_0: Jun 18 11:07:30.835: 00:27:10:c9:91:2c Sending Assoc Response to station on BSSID 00:1d:71:0a:de:70 (status 0) ApVapId 2 Slot 1
    *apfMsConnTask_0: Jun 18 11:07:30.835: 00:27:10:c9:91:2c apfProcessAssocReq (apf_80211.c:5276) Changing state for mobile 00:27:10:c9:91:2c on AP 00:1d:71:0a:de:70 from Associated to Associated
    *dot1xMsgTask: Jun 18 11:07:30.838: 00:27:10:c9:91:2c Disable re-auth, use PMK lifetime.
    *dot1xMsgTask: Jun 18 11:07:30.838: 00:27:10:c9:91:2c Station 00:27:10:c9:91:2c setting dot1x reauth timeout = 0
    *dot1xMsgTask: Jun 18 11:07:30.838: 00:27:10:c9:91:2c Stopping reauth timeout for 00:27:10:c9:91:2c
    *dot1xMsgTask: Jun 18 11:07:30.838: 00:27:10:c9:91:2c dot1x - moving mobile 00:27:10:c9:91:2c into Connecting state
    *dot1xMsgTask: Jun 18 11:07:30.838: 00:27:10:c9:91:2c Sending EAP-Request/Identity to mobile 00:27:10:c9:91:2c (EAP Id 1)
    *osapiBsnTimer: Jun 18 11:07:31.717: 00:27:10:c9:91:2c 802.1x 'txWhen' Timer expired for station 00:27:10:c9:91:2c and for message = M0
    *dot1xMsgTask: Jun 18 11:07:31.718: 00:27:10:c9:91:2c dot1x - moving mobile 00:27:10:c9:91:2c into Connecting state
    *dot1xMsgTask: Jun 18 11:07:31.718: 00:27:10:c9:91:2c Sending EAP-Request/Identity to mobile 00:27:10:c9:91:2c (EAP Id 2)
    *osapiBsnTimer: Jun 18 11:07:32.717: 00:27:10:c9:91:2c 802.1x 'txWhen' Timer expired for station 00:27:10:c9:91:2c and for message = M0
    *dot1xMsgTask: Jun 18 11:07:32.718: 00:27:10:c9:91:2c dot1x - moving mobile 00:27:10:c9:91:2c into Connecting state
    *dot1xMsgTask: Jun 18 11:07:32.718: 00:27:10:c9:91:2c Sending EAP-Request/Identity to mobile 00:27:10:c9:91:2c (EAP Id 3)
    *osapiBsnTimer: Jun 18 11:07:33.717: 00:27:10:c9:91:2c 802.1x 'txWhen' Timer expired for station 00:27:10:c9:91:2c and for message = M0
    *dot1xMsgTask: Jun 18 11:07:33.718: 00:27:10:c9:91:2c dot1x - moving mobile 00:27:10:c9:91:2c into Connecting state
    *dot1xMsgTask: Jun 18 11:07:33.718: 00:27:10:c9:91:2c Sending EAP-Request/Identity to mobile 00:27:10:c9:91:2c (EAP Id 4)
    *apfLbsTask: Jun 18 11:07:34.318: 00:27:10:c9:91:2c Copy AP LOCP - mode:0 slotId:1, apMac 0x0:1d:71:a:de:70
    *apfLbsTask: Jun 18 11:07:34.319: 00:27:10:c9:91:2c Copy WLAN LOCP EssIndex:2 aid:1 ssid:NPT-SECURE
    *apfLbsTask: Jun 18 11:07:34.319: 00:27:10:c9:91:2c Copy Security LOCP ecypher:0x0 ptype:0x2, p:0x1, eaptype:0x6 w:0x1 aalg:0x0, PMState: 8021X_REQD
    *apfLbsTask: Jun 18 11:07:34.319: 00:27:10:c9:91:2c Copy 802.11 LOCP a:0x0 b:0x0 c:0x0 d:0x0 e:0x0 protocol2:0x1 statuscode 0, reasoncode 99, status 3
    *apfLbsTask: Jun 18 11:07:34.320: 00:27:10:c9:91:2c Copy CCX LOCP 4
    *apfLbsTask: Jun 18 11:07:34.320: 00:27:10:c9:91:2c Copy e2e LOCP 0x1
    *apfLbsTask: Jun 18 11:07:34.320: 00:27:10:c9:91:2c Copy MobilityData LOCP status:0, anchorip:0x0
    *osapiBsnTimer: Jun 18 11:07:34.717: 00:27:10:c9:91:2c 802.1x 'txWhen' Timer expired for station 00:27:10:c9:91:2c and for message = M0
    *dot1xMsgTask: Jun 18 11:07:34.718: 00:27:10:c9:91:2c dot1x - moving mobile 00:27:10:c9:91:2c into Connecting state
    *dot1xMsgTask: Jun 18 11:07:34.718: 00:27:10:c9:91:2c Sending EAP-Request/Identity to mobile 00:27:10:c9:91:2c (EAP Id 5)
    *osapiBsnTimer: Jun 18 11:07:35.717: 00:27:10:c9:91:2c 802.1x 'txWhen' Timer expired for station 00:27:10:c9:91:2c and for message = M0
    *dot1xMsgTask: Jun 18 11:07:35.718: 00:27:10:c9:91:2c dot1x - moving mobile 00:27:10:c9:91:2c into Connecting state
    *dot1xMsgTask: Jun 18 11:07:35.718: 00:27:10:c9:91:2c Sending EAP-Request/Identity to mobile 00:27:10:c9:91:2c (EAP Id 6)
    *osapiBsnTimer: Jun 18 11:07:36.717: 00:27:10:c9:91:2c 802.1x 'txWhen' Timer expired for station 00:27:10:c9:91:2c and for message = M0
    *dot1xMsgTask: Jun 18 11:07:36.718: 00:27:10:c9:91:2c dot1x - moving mobile 00:27:10:c9:91:2c into Connecting state
    *dot1xMsgTask: Jun 18 11:07:36.718: 00:27:10:c9:91:2c Sending EAP-Request/Identity to mobile 00:27:10:c9:91:2c (EAP Id 7)
    *osapiBsnTimer: Jun 18 11:07:37.717: 00:27:10:c9:91:2c 802.1x 'txWhen' Timer expired for station 00:27:10:c9:91:2c and for message = M0
    *dot1xMsgTask: Jun 18 11:07:37.718: 00:27:10:c9:91:2c dot1x - moving mobile 00:27:10:c9:91:2c into Connecting state
    *dot1xMsgTask: Jun 18 11:07:37.718: 00:27:10:c9:91:2c Sending EAP-Request/Identity to mobile 00:27:10:c9:91:2c (EAP Id 8)
    *osapiBsnTimer: Jun 18 11:07:38.717: 00:27:10:c9:91:2c 802.1x 'txWhen' Timer expired for station 00:27:10:c9:91:2c and for message = M0
    *dot1xMsgTask: Jun 18 11:07:38.718: 00:27:10:c9:91:2c dot1x - moving mobile 00:27:10:c9:91:2c into Connecting state
    *dot1xMsgTask: Jun 18 11:07:38.718: 00:27:10:c9:91:2c Sending EAP-Request/Identity to mobile 00:27:10:c9:91:2c (EAP Id 9)
    *osapiBsnTimer: Jun 18 11:07:39.717: 00:27:10:c9:91:2c 802.1x 'txWhen' Timer expired for station 00:27:10:c9:91:2c and for message = M0
    *dot1xMsgTask: Jun 18 11:07:39.718: 00:27:10:c9:91:2c dot1x - moving mobile 00:27:10:c9:91:2c into Connecting state

  • Problem on "Registration Sessioned Timed-Out

    Hey there... i just would like to ak if what will be the remedy if everytime you'll attempt to upload songs to your ipod, you are prompted that registration sessioned timed-out and you cannot anymore upload new songs to your ipod. anyweiz im using the second generation ipod nano.. what is the solution to this problem? thank you
    Generic   Windows XP Pro  

    Hey I no wat causes this.On windows Xp you got 2 my computer.And then into your iPod,etc.When you r in your iPod their should be files like calenders,notes,ect.Now u go 2 tools,folder options,view and then check the circle that says show hidden files.Then go into the hidden file.And then iTunes.In itunes their should be a file called show registration.Cut and paste that into a safe place (just in case i put mine into my docs)After that run itunes.And vola' no more Your registration session has been timed out.(IM so smart im only 12)
    [email protected]
    Acer Aspire 1640   Windows XP  

  • Keep gettting "Session Timed Out" message

    Hey everyone. I am trying to retrieve my email from my .mac account. I have to use my web browser (safari) to get email because of work router. Though I can log into my email and see I have messages, when I click on them, I immediately get a "session timed out" message, even if I just logged in. Nothing has been changed on the work router, and it worked fine yesterday. Any ideas?

    Hi Drew.
    This forum is for discussing issues related to the Mail & Address Book applications included with Mac OS X 10.4 (Tiger). If you’re not talking about Mac OS X’s Mail, but .Mac mail on the web instead, the right forum for such questions would be .Mac Email On The Web.

  • Application Server Session timed out (-11) (lack of debug in internal ITS)

    Dear Sirs,
    I get the error message below, when I try to run a IAC through internal ITS. The IAC worked for a while (<30 minutes), and then suddenly this error appeared.
    I can see that this error message has been asked about previously, but then in connection with statefull/stateless BSP applications (e.g "Session timed out thread", on this forum May 31 2005).
    In this thread the solution is apparently to alter the 'rdisp/plugin_auto_logout', is this the case for us as well?
    I have read Error handling using the ICM , but not able to actually beeing able to pinpoint the problme.
    All our other IAC are working it is only a problem with one of them. The problem is still valid even if I log on with different user, and the error is still there now even after two hours. The problem transaction is a altered version of the WSTA, and I am able to get the first screen where I enter the store number. 
    Any tips or suggestions to pinpoint the error?
    +400 Session timed out - please log in again
    Application Server Session timed out (-11)
    Error:     -11
    Version:     6040
    Component:     ICM
    Date/Time:     Thu Apr 27 14:13:56 2006
    Module:     icxxthr_mt.c
    Line:     1719
    Server:     xxXXXt_TXX_XX
    Detail:     Session does not exist+
    In SM21 :
    +Transaction Canceled ITS_P 025 ( 0x2103: Interpreter: The input contains errors. )                                                              
    Documentation for system log message D01 :
    The transaction has been terminated.  This may be caused by a termination message from the application (MESSAGE Axxx) or by an error detected by the SAP System due to which it makes no sense to proceed with the transaction.  The actual reason for the termination is indicated by the T200 message and the parameters.                         
    Additional documentation for message ITS_P               025 Template interpretation terminated - internal error &1                        
    No documentation exists for message IT025+                                     
    Best regards,
    Jørgen

    Dear Sirs,
    The error has been solved. It was a matter of an illegal input sendt to the RetailHeaderFunction.
    However, this makes way for another question.
    On the standalone ITS, it was possible to get error messages which indicated where the code contained errors, when it was runned.
    How is it possible to make the internal ITS gives better feedback (errors?), and show where the error is?
    Jørgen

  • Timed out, server application never registered to receive message

    Hello. So, It's been a while since I last used iMovie, and now I'm having a very difficult time of it sharing to anything or even saving a version to disk. It won't even save to Theater! Each time I do, it gives me the exact same cryptic message: ""timed out, server application never registered to receive message" - and that's even when saving to disc, and not saving to ANY exterior source.
    Since I can't find any mention of this message on Google or Duck Duck Go, I am calling upon alla y'all. So, the details on my system:
    Macbook Pro, 13-inch (early 2011)
    2.3 GHz Intel Core i5
    4 GB 1333 MHz DDR3
    318 gigs of storage, and yeah, it's about 3.8 gigs left, even with an 500 gig external hard drive running concurrently..
    Version of iMovie is 10.0.6.

    I am experiencing the same issue and it's getting annoying. I can't logout or shutdown normally.
    iMac, 24 inch, 2 GB RAM, 10.5.7, 500 GB drive with lotsa space left.
    Here is the message in system.log when I try to logout and the dock stays as described above:
    Jul 30 09:17:40 new-host loginwindow761: ERROR | WSActivateApp | SetFrontProcess({0, 1655188}) returned error -600. Unable to activate process.
    Have tried the same fixes as above (repair disk, repair permissions, archive & install). No joy. Any ideas? Thanks!

  • I'm trying to redeem my itunes gift card and i get the message "session timed out".  does anyone know why i'm not able to redeem my card and why i get this message?

    i'm trying to redeem my itunes gift card and i get the message "session timed out."  does anyone know why i'm not able to redeem my card and why i get this message in stead?

    I've been having the same issues too, and thought it was just my outdated computer or account?!
    Every time I try to purchase a song, "session has timed out" shows up after I click "agree" to the terms!? I seem to be in the exact same scenario as 'SportsBarn' above:  Itunes support have replied repeatedly with the same "solutions" but nothing has helped or even been applicable.  I have an older laptop, 2005 Powerbook running OS X 10.4 Tiger so it's not compatible with the latest iTunes 10.5.2 which requires minimum OS X 10.5. I've been using the balance already in my iTunes account (from redeemed giftcards over the past few years) with no problem, until recently (my last successful purchase was October 2011). I wonder if it's the older OS or just a redemption glitch even with newer computers?

  • Itunes won't allow me to buy a song, says session timed out

    I have $ to spend in my itunes, but when I try to buy a song it says session timed out, try again

    You need to delete her music that she put on your iPod. She does not have the right/lience to give it to you. Yu are stealing.

  • I am trying to buy songs on itunes and half way through the terms and conditions come up, I accept them and press return and then I get a 'session timed out' notice and the sale hasn't gone through - tried loads of times / updating software, any answers?

    I am trying to buy songs on itunes and half way through the terms and conditions come up, I accept them and press return and then I get a 'session timed out' notice and the sale hasn't gone through - tried loads of times / updating software, any answers?

    I am trying to buy songs on itunes and half way through the terms and conditions come up, I accept them and press return and then I get a 'session timed out' notice and the sale hasn't gone through - tried loads of times / updating software, any answers?

  • Error "Session Timed Out" When saving  webi report as PDF

    Hi,
    I am getting below error when saving  report as PDF
    The Session Timed Out.The document *.wid has been auto saved  in the Favorites~WebIntelligence Folder..Click Restore to retrieve it.
    (ERROR : WIJ600001).
    I get above error in PROD  but works fine in DEV.
    Version :  BOE 3.1 SP7 (DEV & PROD).
    Session Time out  set as  one hour.
    Report runs for 3 minutes .once I get the data if I try to save it as PDF immediately I get the above mentioned Error.

    The default Webi auto-save is every 600 seconds, which is 10 minutes.  You could increase it to 3600 seconds (1 hour) in CMC -> Applications > Web Intelligence > Properties > Auto-save Settings on "Auto-save time delay".
    See KB 1297132 - Error: WIJ 60001 after the Web Intelligence Java Report Panel is left inactive some time on http://service.sap.com/sap/support/notes/1297132.
    Hope this helps,
    Jin-Chong

  • I have a Windows 7 Computer.  When I go into itunes store, it comes up, and I can navigate in it, but a box keeps appearing saying accessing itunes store.  I then get a session timed out, so can't purchase anything.

    I own a Windows 7 computer.  I can get into itunes okay, and I can get into the itunes store okay.  After I am in the store, a box keeps appearing that says "Accessing itunes store".  It goes on and off.  I am able to navigate when the box is not showing.  If I try to download music,  I get to the point where I need to agree to the agreement contract, then says "Session Timed Out."  I have the latest versions of itunes and all my Windows Updates.  What can I do about this?

    I was struggling with this since my latest Itunes update.  Fiirst it would not recognize my IPad as a device, after correcting that, it would list the Ipad in my device but my Sync had no options (summry, info, etc). and it kept saying it was "Accessing Itunes store".  reading your question I suddently tried deleting the itunes task (alt-ctrl, delete, processes) and delete Itunes.  (By the way, I had rebooted my computer several times over the last few days).  I opened up Itunes, and voila. Device is there. No "accessing windows" and my sync has the normal options.
    ****..feels good to actually write an answer rather than writing a questions.
    Eman

  • I use Illustrator CC on a Mac (OS 10.6.8) Kuler is all ghosted out even though I am logged in to CC.

    I use Illustrator CC on a Mac (OS 10.6.8) Kuler is all ghosted out even though I am logged in to the Creative Cloud.
    Why?
    Diane Sammet

    I tried logging off and on as the other person mentioned, but that did not work.
    Attached is a screen shot:

Maybe you are looking for