Registering Issue for 6900 series IPphone on 2801 CME 8.6
Hello,
I am unable to register cisco 6901 phone on Cisco 2801 router. as per Cisco's recommendation details:
===============================================
IOS Version:
c2801-adventerprisek9-mz.151-4.M1
CME: Version: 8.6
TAR: cme-151-4Mv1
Flash & RAM:
128 & 256MB respectively
Firmware:
SCCP6901.9-1-1-0.loads
APP6901SCCP.9-1-1-0.zz.sgn
KNL6901SCCP.9-1-1-0.zz.sgn
Also tried:
APP6901SCCP.9-0-2-0.zz.sgn
KNL6901SCCP.9-0-2-0.zz.sgn
SCCP6901.9-0-2-0.loads
===============================================
After the standard configuration the phone is reloading continuously. I would really appreciate if anyone coould help me out in this regards.
Also please find the attached IPT Matrix compatibility
Many Thanks,
Mohammad Usman
I have the same problem.
Can anyone help?
Thank you.
Similar Messages
-
Data conversion for Vertex series O upgrade
Hello Experts,
We have Vertex Q series already in place and currently moving to O series.
Due to tax jurisdiction code structure changes, Vertex has suggested us to convert all master data and transaction data to have new Tax jurisdiction code as per O series.
We found conversion programs but, facing issue due to tax jurisdiction code structure changes from Q to O.
Basically OSS notes applied for Q series do not support O series and could not find new OSS notes fixing such issues for O series.
Has anyone face this problem before? Any input will be highly appreciated.
Thank you,
Gouri.Hello Experts,
We have Vertex Q series already in place and currently moving to O series.
Due to tax jurisdiction code structure changes, Vertex has suggested us to convert all master data and transaction data to have new Tax jurisdiction code as per O series.
We found conversion programs but, facing issue due to tax jurisdiction code structure changes from Q to O.
Basically OSS notes applied for Q series do not support O series and could not find new OSS notes fixing such issues for O series.
Has anyone face this problem before? Any input will be highly appreciated.
Thank you,
Gouri. -
Register information on X series driver for encoder
Hi All:
I am working on the X series driver development by using MHDDK. After comparing M series and X series I found that theere is a Gi_Save_Trace bit in register Gi_Command_Register in M series. When it is set, the register goes into the latched mode after the next clock edge to assure valid data was latched. However, I can't find equivalent register bit in all X series counter registers.
Can anyone tell me what is the equivalent register bit for same function that Gi_Save_Trace does?
Thanks,
LarryHi PedroMunoz,
Actually, I wanted to post it at DDK forum. I don't know why it is shown here. I may need to do it again.
Thanks,
Larry -
Register Level Programmer Manual for M Series
I am using M Series 6221 DAQ and unable to find the Register Level Programmer Manual for it. The E series manual is quite a detailed one (http://www.ni.com/pdf/manuals/341079b.pdf) , Can you please point me to a similar document for M series ..
Hello ,
I was directed to the same websites by the Application
Engineer earlier too.
I have been using the C++ code. The code is highly complex
and without any comments. Its very difficult to reverse
engineer it. Its a practice that code is written by refering
the manual , instead of understanding the working from code.
Its unbelivable that NI is selling this product without proper
docuemntation.
Anyways, My problem right now is :
Info
1. Using a x86 SBC based PC with ThreadX as operating system
2. I want to use Port1 and Port2 as DI. Able to read from Port1 and Port2 by following the program.
3. Channel 0 and Channel 1 as On Demand AI (RSE) for sensing 2 different parameters
in the range of 0V to 10V.
4. Want to read a single sample from both the channels.
5. Unable to read from Channel 0 and Channel 1 correctly yet.
Questions:
1. I am using aiex1.c program to acquire Analog signal .
- numberOfChannels = 2 and numberOfSamples = 1
- not using adcReset(board)
- aiPersonalize (board, tMSeries::tAI_Output_Control::kAI_CONVERT_Output_SelectActive_High);
- aiConfigureChannel (board,
Channel number 0 and 1 one after the other
0 gain
tMSeries::tAI_Config_FIFO_Data::kAI_Config_PolarityBipolar,
tMSeries::tAI_Config_FIFO_Data::kAI_Config_Channel_TypeRSE,
Channel 1 is last channel )
- As Is aiConvert (board,
280, // convert period divisor
280, // convert delay divisor
kFalse);
Any idea if i am not conguring or missing something ???
As the acquired value i read is incorrect
2. Suppose i configure Channel 0 and Channel 1, And want to acquire only from
Channel 0 , What to do for it ?
3. If acquisations happens from both the Channels , How do i know which data is acquired
from the Channel 0 and Channel 1 in the FIFO ?
4. Is there a method to read data directly from ADC instead of reading it from FIFO ?
5. If there is input signal at Port0 (configured as DI), Can a interrupt be triggered ?
6. How to make AI interrput based ?
Thanks,
Irfan -
Can't Web Browse to 6900 series phones running firmware 9.4.1.3 on cisco CME
Hi
I'm having issues with web browseing to cisco IP phones.
Historically we could web browse to a a basic settings/ dianostics page of the phone by simiply browseing to the phones IP address.
However after an upgrade to SCCP firmware 9.4.1.3 this is no longer possible? I have tested from the same lan/subnet but still it refuses connections. Did a telnet using port 80 and this is also refused.
Was this feature removed in the later firmware? I have always found this feature usful especially when doing degugging and remote testing.
If it is still possible to web to them does anyone know how this is enabled. I'm searching around but not found a solution yet.
Thanks
SimonI think web access disabled by default started in 9.3(3) for these phone models:
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cuipph/6900_series/firmware/933/release_notes/P069_BK_R9A78776_00_rn-9_3_3-6900-series/P069_BK_R9A78776_00_rn-9_3_3-6900-series_chapter_00.html#P690_TP_WC33699B_00 -
I bought lightroom 5 online and for licensation my seriesnummer was named as Aktiualisierungsnummer and i was asked for a series number of a previous version. I never had one, when I bought the lr5 version there was no comment about having a previous version. How can I get my version licensed
Babowa
Thank you for your prompt reply. I have bought 1 MacbookPor 17, 1 Macbook air, 1 MacbookPro 15 , 2 ipads, 3 iphones, and this iMac27 and 2 of iMAC24 or 20 not sure but I do not recall ever doing what you are telling me in your reply. When you get a extended car warranty, you don't sign up for it.. it is just there and is included in the sale. You don't buy this warranty to use it.. You buy it, in case something happens. Here a perfect iMAC with minimum 100 hour useage has a dead drive. That is not normal and I should not have to even be requesting anything since most MFG offer a 3-5 year warranty on their disc drives and I believe that is probably passed on to Apple regardless if an extended warranty is purchased or not. Customer service dictates a more flexible approach to make sure the lifetime value of a customer is not lost due to some misunderstanding.
I was in the MacStore that I purchased the unit..and they found and pulled the invoice and confirmed
the purchase of it in front of me. I had paid with credit card and fortunately it was there in their system. I do not also recall recieving any box or paper although most everything I ever get remains sealed.. I am not in the habit of opening anything since I have never encountered any serious issues before.
I have used my Macbookpro warranty 1 time and that is all throughout the years I have been investing in Apple equipment.
I just recieved a letter from the store asking me to get the paper to them so they can register it... I don't recall getting any paper actually. But I do have several boxes sealed here.. On this iMAC27, it was a hurry up and get it done thing and I don't remember taking anything extra with it. Regardless, my request does not seem unreasonable.
Thank you -
My IPad 2 external speaker does not work and the original headphones have popping sound when used. This all occurred at the same time as my IPhone and IPod headphones only plays mono (and no, the "mono" option is not on) with the original headphones, as well as, other headphones tested. How can there be audio issue for all these devices at the same time?
As you may have noted from the list of Apple devices I own, I believed in the Apple and the products it was producing; but it is hard to believe from my experience and the other voices within the Apple Community that we are all experiencing the same hardware issues. Especially since I recently, I upgraded to an IPhone 4g (no, my faith in IPhone 5 series is very little) and is experiencing the same audio problem as described above. So now, I am off to the Apple store again to be told that it’s a hardware problem on new IPhone. Really? Apple, what happen to the pride in the product you were producing?Everyone does things a little differently. I love to "jam " along with iTunes ( or old Lp's) . Always have. That's where/how I've learned to play .
I'm sure leonieDF is giving a proper way to jam along on a keyboard with an iTune. He blows my mind all the time with what he knows. Nuff respects to him !
What I do is make a GB project I call "Jam With". I'll make several new tracks that are blank. Just has a few instruments named in the blank tracks. You can change those per song ...
Because I'm not concerned about changing the pitch / key.... of the iTune or the tempo ... I can simply play along with it.
Peace,
P. Dreadie -
Analog start trigger for x series card gives an error?
Hi everyone,
I am having some trouble setting up an analog start trigger for DAQ using an x series PCIe card (6351)... Attached is my configuration... After reading the manual (http://digital.ni.com/manuals.nsf/websearch/08B4B2E1B5373B94862579BA006E6BAB), my understanding is that AFPI0 is a compatable analog trigger for the device; however, the vi will not run and I get an error... Although if I change the soruce to "Force" (which is ai0) it works..
Also, the device document says (pg 11-8):
"To improve trigger accuracy, do the following:
• Use an AI channel (with a small input range) instead of APFI <0,1> as your trigger source. The DAQ device does not amplify the APFI <0, 1> signals. When using an AI channel, the NI-PGIA amplifies the AI channel signal before driving the analog trigger circuitry. If you configure the AI channel to have a small input range,"
To me, this implies that I probably should use "Force" as the trigger soruce anyway (note that the instrunment is used to acquire data load cell data generated from human muscle contractions; so slew rates are relatively low compared to signals acquired from industrial tests).
Could someone please comment on these issues for me?
Regards,
Jack
LV2010
Attachments:
Untitled 1.vi 22 KBOk... I think I have answered by own question... APFI0 needs a low impedence signal to drive the terminal... I mistakenly thought this was an internal terminal or trigger...
So I should stick with using the first analog signal acquired in my DAQ device (e.g. ai0) as the trigger source?
Regards,
Jack
LV2010 -
I'd like to move an on-premesis SQL Server Database to SQL Azure. I've used SQL Mgmt Studio to Extract Data Tier Application and save my db as a dacpac file. Now I'm connected to my Azure server and I've chosen to Deploy Data Tier Application. I select my
dacpac and the deploy starts but then on the last step "Registering metadata for database" it times out. I've tried it a couple of times and each time the deployed database is there and appears to be fully populated, but I'm not sure if I can ignore
that error and continue. What is supposed to happen in that step, and should I expect it to fail when deploying to SQL Azure?
I'm following the steps here http://msdn.microsoft.com/en-us/library/hh694043.aspx in the Using Migration Tools > Data-tier Application DAC Package section, except that to deploy there's no SQL Mgmt Studio > Object Explorer [server]
> Management >"Data Tier Applications" node, so I'm deploying by right-clicking on the server name and choosing "Deploy Data-tier Application".
My (total) guess here is that it's deployed the database fine and it's doing whatever magic happens when you register a data tier application, except that it's not working for SQL Azure.
I'm running against a server created for the new Azure service tiers, not against a Web/Business edition server.
The full details of error I get are below.
thanks,
Rory
TITLE: Microsoft SQL Server Management Studio
Could not deploy package.
Warning SQL0: A project which specifies SQL Server 2008 as the target platform may experience compatibility issues with SQL Azure.
(Microsoft.SqlServer.Dac)
ADDITIONAL INFORMATION:
Unable to register data-tier application: Unable to reconnect to database: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding. (Microsoft.Data.Tools.Schema.Sql)
Unable to reconnect to database: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding. (Microsoft.Data.Tools.Schema.Sql)
Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding. (Microsoft SQL Server, Error: -2)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%20SQL%20Server&ProdVer=11.00.9213&EvtSrc=MSSQLServer&EvtID=-2&LinkId=20476
The wait operation timed out
BUTTONS:
OKHello,
The registration process creates a DAC definition that defines the objects in the database, and register the DAC definition in the master system database in Windows Azure SQL Database.
Based on the error message, there is timeout error when connect to SQL Database. Did you deploy a large database? When move large data to Azure SQL Database, it is recommended to use SQL Server Integration Services (SSIS) and BCP utility.
Or you can try to create a client application with the Data-Tier Application Framework (DACFx) client tool to import database and handle connection loss it by re-establish the connection.
Reference: http://sqldacexamples.codeplex.com/
Regards,
Fanny Liu
If you have any feedback on our support, please click here.
Fanny Liu
TechNet Community Support -
Where is Support for Windows Update issues for Windows Server?
Where is Support for Windows Update Issues for Windows Server?
Windows Update keeps prompting to install an important update, KB2871690 and continually fails with error code 0x800f922
I ran all the fixes I can find, it still fails.
I also tried the manual install, fails.
Microsoft used to provide no charge support for Windows Update issues. They additionally offer online fixes for other versions of windows, but not server, and I can't find a forum.
I also cannot ignore the update, it continually prompts.
I ran the windowsupdate.diagcab and it continually states it fixes Windows Update error 0x80070057, by resetting windows update data store. It further states it fixes Problems installing recent updates.
But it doesn't. I've run it 50 times, and it says the same thing every time.
So there is no support for windows update, and no support for windowsupdate.diagcab.
What's the deal?I've done the SFC/ SCANNOW and DISM
here is the cbs.log
What are we looking for?
2013-12-04 19:48:19, Info DISM PID=1612 TID=1616 Scratch directory set to 'X:\$WINDOWS.~BT\Windows\TEMP\'. - CDISMManager::put_ScratchDir
2013-12-04 19:48:19, Info DISM PID=1612 TID=1616 DismCore.dll version: 6.2.9200.16384 - CDISMManager::FinalConstruct
2013-12-04 19:48:19, Info DISM PID=1612 TID=1616 Scratch directory set to 'X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360'. -
CDISMManager::put_ScratchDir
2013-12-04 19:48:19, Info DISM PID=1612 TID=1616 Successfully loaded the ImageSession at "X:\$Windows.~BT\sources" - CDISMManager::LoadLocalImageSession
2013-12-04 19:48:20, Info DISM DISM Provider Store: PID=1612 TID=1616 Found and Initialized the DISM Logger. - CDISMProviderStore::Internal_InitializeLogger
2013-12-04 19:48:20, Info DISM DISM Provider Store: PID=1612 TID=1616 Failed to get and initialize the PE Provider. Continuing by assuming
that it is not a WinPE image. - CDISMProviderStore::Final_OnConnect
2013-12-04 19:48:20, Info DISM DISM Provider Store: PID=1612 TID=1616 Finished initializing the Provider Map. - CDISMProviderStore::Final_OnConnect
2013-12-04 19:48:20, Info DISM DISM Provider Store: PID=1612 TID=1616 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
2013-12-04 19:48:20, Info DISM DISM Provider Store: PID=1612 TID=1616 Provider has previously been initialized. Returning the existing instance.
- CDISMProviderStore::Internal_GetProvider
2013-12-04 19:48:20, Info DISM DISM Provider Store: PID=1612 TID=1616 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
2013-12-04 19:48:20, Info DISM DISM Provider Store: PID=1612 TID=1616 Provider has previously been initialized. Returning the existing instance.
- CDISMProviderStore::Internal_GetProvider
2013-12-04 19:48:20, Info DISM DISM Manager: PID=1612 TID=1616 Successfully created the local image session and provider store. - CDISMManager::CreateLocalImageSession
2013-12-04 19:48:20, Info DISM DISM Provider Store: PID=1612 TID=1616 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
2013-12-04 19:48:20, Info DISM DISM Provider Store: PID=1612 TID=1616 Provider has previously been initialized. Returning the existing instance.
- CDISMProviderStore::Internal_GetProvider
2013-12-04 19:48:20, Info DISM DISM.EXE:
2013-12-04 19:48:20, Info DISM DISM.EXE: <----- Starting Dism.exe session ----->
2013-12-04 19:48:20, Info DISM DISM.EXE:
2013-12-04 19:48:20, Info DISM DISM.EXE: Host machine information: OS Version=6.2.9200, Running architecture=amd64, Number of processors=4
2013-12-04 19:48:20, Info DISM DISM.EXE: Dism.exe version: 6.2.9200.16384
2013-12-04 19:48:20, Info DISM DISM.EXE: Executing command line: X:\$Windows.~BT\sources\dism.exe /logpath:X:\$Windows.~BT\sources\Panther\cbs.log
/scratchdir:X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360 /image:X:\ /is-serviceable
2013-12-04 19:48:20, Info DISM DISM Provider Store: PID=1612 TID=1616 Getting the collection of providers from a local provider store type. - CDISMProviderStore::GetProviderCollection
2013-12-04 19:48:20, Info DISM DISM Provider Store: PID=1612 TID=1616 Provider has not previously been encountered. Attempting to initialize
the provider. - CDISMProviderStore::Internal_GetProvider
2013-12-04 19:48:20, Info DISM DISM Provider Store: PID=1612 TID=1616 Loading Provider from location X:\$Windows.~BT\sources\FolderProvider.dll
- CDISMProviderStore::Internal_GetProvider
2013-12-04 19:48:20, Info DISM DISM Provider Store: PID=1612 TID=1616 Connecting to the provider located at X:\$Windows.~BT\sources\FolderProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2013-12-04 19:48:20, Info DISM DISM Provider Store: PID=1612 TID=1616 Provider has not previously been encountered. Attempting to initialize
the provider. - CDISMProviderStore::Internal_GetProvider
2013-12-04 19:48:20, Info DISM DISM Provider Store: PID=1612 TID=1616 Loading Provider from location X:\$Windows.~BT\sources\WimProvider.dll -
CDISMProviderStore::Internal_GetProvider
2013-12-04 19:48:20, Warning DISM DISM Provider Store: PID=1612 TID=1616 Failed to Load the provider: X:\$Windows.~BT\sources\WimProvider.dll. - CDISMProviderStore::Internal_GetProvider(hr:0x8007007e)
2013-12-04 19:48:20, Info DISM DISM Provider Store: PID=1612 TID=1616 Provider has not previously been encountered. Attempting to initialize
the provider. - CDISMProviderStore::Internal_GetProvider
2013-12-04 19:48:20, Info DISM DISM Provider Store: PID=1612 TID=1616 Loading Provider from location X:\$Windows.~BT\sources\VHDProvider.dll -
CDISMProviderStore::Internal_GetProvider
2013-12-04 19:48:20, Warning DISM DISM Provider Store: PID=1612 TID=1616 Failed to Load the provider: X:\$Windows.~BT\sources\VHDProvider.dll. - CDISMProviderStore::Internal_GetProvider(hr:0x8007007e)
2013-12-04 19:48:20, Info DISM DISM Provider Store: PID=1612 TID=1616 Provider has not previously been encountered. Attempting to initialize
the provider. - CDISMProviderStore::Internal_GetProvider
2013-12-04 19:48:20, Info DISM DISM Provider Store: PID=1612 TID=1616 Loading Provider from location X:\$Windows.~BT\sources\ImagingProvider.dll
- CDISMProviderStore::Internal_GetProvider
2013-12-04 19:48:20, Warning DISM DISM Provider Store: PID=1612 TID=1616 Failed to Load the provider: X:\$Windows.~BT\sources\ImagingProvider.dll. - CDISMProviderStore::Internal_GetProvider(hr:0x8007007e)
2013-12-04 19:48:20, Info DISM DISM Provider Store: PID=1612 TID=1616 Provider has not previously been encountered. Attempting to initialize
the provider. - CDISMProviderStore::Internal_GetProvider
2013-12-04 19:48:20, Info DISM DISM Provider Store: PID=1612 TID=1616 Loading Provider from location X:\$Windows.~BT\sources\CompatProvider.dll
- CDISMProviderStore::Internal_GetProvider
2013-12-04 19:48:20, Info DISM DISM Provider Store: PID=1612 TID=1616 Connecting to the provider located at X:\$Windows.~BT\sources\CompatProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2013-12-04 19:48:20, Info DISM DISM.EXE: Got the collection of providers. Now enumerating them to build the command table.
2013-12-04 19:48:20, Info DISM DISM.EXE: Attempting to add the commands from provider: DISM Log Provider
2013-12-04 19:48:20, Info DISM DISM.EXE: Attempting to add the commands from provider: FolderManager
2013-12-04 19:48:20, Info DISM DISM.EXE: Attempting to add the commands from provider: Compatibility Manager
2013-12-04 19:48:20, Info DISM DISM.EXE: Succesfully registered commands for the provider: Compatibility Manager.
2013-12-04 19:48:20, Warning DISM DISM.EXE: Failed to load WimManager. Try running from the Deployment Tools Command Prompt. If the issue persists, ensure that wimgapi.dll
and wimserv.exe are up to date.
2013-12-04 19:48:20, Warning DISM DISM.EXE: Failed to add any commands.
2013-12-04 19:48:20, Info DISM DISM Provider Store: PID=1612 TID=1616 Getting the collection of providers from a local provider store type. - CDISMProviderStore::GetProviderCollection
2013-12-04 19:48:20, Info DISM DISM Manager: PID=1612 TID=1616 physical location path: X:\ - CDISMManager::CreateImageSession
2013-12-04 19:48:20, Info DISM DISM Manager: PID=1612 TID=1616 Copying DISM from "X:\Windows\System32\Dism" - CDISMManager::CreateImageSessionFromLocation
2013-12-04 19:48:20, Info DISM DISM Manager: PID=1612 TID=1616 Successfully loaded the ImageSession at "X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD"
- CDISMManager::LoadRemoteImageSession
2013-12-04 19:48:20, Info DISM DISM Image Session: PID=1644 TID=1656 Instantiating the Provider Store. - CDISMImageSession::get_ProviderStore
2013-12-04 19:48:20, Info DISM DISM Provider Store: PID=1644 TID=1656 Initializing a provider store for the IMAGE session type. - CDISMProviderStore::Final_OnConnect
2013-12-04 19:48:20, Info DISM DISM Provider Store: PID=1644 TID=1656 Provider has not previously been encountered. Attempting to initialize
the provider. - CDISMProviderStore::Internal_GetProvider
2013-12-04 19:48:20, Info DISM DISM Provider Store: PID=1644 TID=1656 Loading Provider from location X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD\OSProvider.dll
- CDISMProviderStore::Internal_GetProvider
2013-12-04 19:48:20, Info DISM DISM Provider Store: PID=1644 TID=1656 Connecting to the provider located at X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD\OSProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2013-12-04 19:48:20, Info DISM DISM OS Provider: PID=1644 TID=1656 Defaulting SystemPath to X:\ - CDISMOSServiceManager::Final_OnConnect
2013-12-04 19:48:20, Info DISM DISM OS Provider: PID=1644 TID=1656 Defaulting Windows folder to X:\Windows - CDISMOSServiceManager::Final_OnConnect
2013-12-04 19:48:22, Info DISM DISM Provider Store: PID=1644 TID=1656 Attempting to initialize the logger from the Image Session. - CDISMProviderStore::Final_OnConnect
2013-12-04 19:48:22, Info DISM DISM Provider Store: PID=1644 TID=1656 Provider has not previously been encountered. Attempting to initialize
the provider. - CDISMProviderStore::Internal_GetProvider
2013-12-04 19:48:22, Info DISM DISM Provider Store: PID=1644 TID=1656 Loading Provider from location X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD\LogProvider.dll
- CDISMProviderStore::Internal_GetProvider
2013-12-04 19:48:22, Info DISM DISM Provider Store: PID=1644 TID=1656 Connecting to the provider located at X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD\LogProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2013-12-04 19:48:22, Info DISM DISM Provider Store: PID=1644 TID=1656 Found and Initialized the DISM Logger. - CDISMProviderStore::Internal_InitializeLogger
2013-12-04 19:48:22, Info DISM DISM Provider Store: PID=1644 TID=1656 Provider has not previously been encountered. Attempting to initialize
the provider. - CDISMProviderStore::Internal_GetProvider
2013-12-04 19:48:22, Info DISM DISM Provider Store: PID=1644 TID=1656 Loading Provider from location X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD\PEProvider.dll
- CDISMProviderStore::Internal_GetProvider
2013-12-04 19:48:22, Warning DISM DISM Provider Store: PID=1644 TID=1656 Failed to Load the provider: X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD\PEProvider.dll.
- CDISMProviderStore::Internal_GetProvider(hr:0x8007007e)
2013-12-04 19:48:22, Info DISM DISM Provider Store: PID=1644 TID=1656 Failed to get and initialize the PE Provider. Continuing by assuming
that it is not a WinPE image. - CDISMProviderStore::Final_OnConnect
2013-12-04 19:48:22, Info DISM DISM Provider Store: PID=1644 TID=1656 Finished initializing the Provider Map. - CDISMProviderStore::Final_OnConnect
2013-12-04 19:48:22, Info DISM DISM Provider Store: PID=1644 TID=1656 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
2013-12-04 19:48:22, Info DISM DISM Provider Store: PID=1644 TID=1656 Provider has previously been initialized. Returning the existing instance.
- CDISMProviderStore::Internal_GetProvider
2013-12-04 19:48:22, Info DISM DISM Manager: PID=1612 TID=1616 Image session successfully loaded from the temporary location: X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD
- CDISMManager::CreateImageSession
2013-12-04 19:48:22, Info DISM DISM Provider Store: PID=1644 TID=1656 Getting Provider OSServices - CDISMProviderStore::GetProvider
2013-12-04 19:48:22, Info DISM DISM Provider Store: PID=1644 TID=1656 Provider has previously been initialized. Returning the existing instance.
- CDISMProviderStore::Internal_GetProvider
2013-12-04 19:48:22, Info DISM DISM OS Provider: PID=1644 TID=1656 Setting SystemPath to X:\ - CDISMOSServiceManager::SetSystemPath
2013-12-04 19:48:22, Info DISM DISM.EXE: Target image information: OS Version=6.2.9200.16384, Image architecture=amd64
2013-12-04 19:48:22, Info DISM DISM Provider Store: PID=1644 TID=1656 Getting the collection of providers from an image provider store type. -
CDISMProviderStore::GetProviderCollection
2013-12-04 19:48:22, Info DISM DISM Provider Store: PID=1644 TID=1656 Provider has not previously been encountered. Attempting to initialize
the provider. - CDISMProviderStore::Internal_GetProvider
2013-12-04 19:48:22, Info DISM DISM Provider Store: PID=1644 TID=1656 Loading Provider from location X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD\CbsProvider.dll
- CDISMProviderStore::Internal_GetProvider
2013-12-04 19:48:22, Info DISM DISM Provider Store: PID=1644 TID=1656 Connecting to the provider located at X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD\CbsProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2013-12-04 19:48:22, Info DISM DISM Provider Store: PID=1644 TID=1656 Encountered a servicing provider, performing additional servicing initializations.
- CDISMProviderStore::Internal_LoadProvider
2013-12-04 19:48:22, Info DISM DISM Package Manager: PID=1644 TID=1656 Finished initializing the CbsConUI Handler. - CCbsConUIHandler::Initialize
2013-12-04 19:48:22, Info DISM DISM Package Manager: PID=1644 TID=1656 Loaded servicing stack for offline use only. - CDISMPackageManager::RefreshInstanceAndLock
2013-12-04 19:48:22, Info DISM DISM Package Manager: PID=1644 TID=1656 Loaded servicing stack for offline use only. - CDISMPackageManager::RefreshInstanceAndLock
2013-12-04 19:48:22, Info DISM DISM Package Manager: PID=1644 TID=1656 Loaded servicing stack for online use only. - CDISMPackageManager::RefreshInstanceAndLock
2013-12-04 19:48:22, Info DISM DISM Provider Store: PID=1644 TID=1656 Provider has not previously been encountered. Attempting to initialize
the provider. - CDISMProviderStore::Internal_GetProvider
2013-12-04 19:48:22, Info DISM DISM Provider Store: PID=1644 TID=1656 Loading Provider from location X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD\MsiProvider.dll
- CDISMProviderStore::Internal_GetProvider
2013-12-04 19:48:22, Info DISM DISM Provider Store: PID=1644 TID=1656 Connecting to the provider located at X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD\MsiProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2013-12-04 19:48:22, Info DISM DISM Provider Store: PID=1644 TID=1656 Encountered a servicing provider, performing additional servicing initializations.
- CDISMProviderStore::Internal_LoadProvider
2013-12-04 19:48:22, Info DISM DISM Provider Store: PID=1644 TID=1656 Provider has not previously been encountered. Attempting to initialize
the provider. - CDISMProviderStore::Internal_GetProvider
2013-12-04 19:48:22, Info DISM DISM Provider Store: PID=1644 TID=1656 Loading Provider from location X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD\IntlProvider.dll
- CDISMProviderStore::Internal_GetProvider
2013-12-04 19:48:22, Info DISM DISM Provider Store: PID=1644 TID=1656 Connecting to the provider located at X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD\IntlProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2013-12-04 19:48:22, Info DISM DISM Provider Store: PID=1644 TID=1656 Encountered a servicing provider, performing additional servicing initializations.
- CDISMProviderStore::Internal_LoadProvider
2013-12-04 19:48:22, Info DISM DISM Provider Store: PID=1644 TID=1656 Provider has not previously been encountered. Attempting to initialize
the provider. - CDISMProviderStore::Internal_GetProvider
2013-12-04 19:48:22, Info DISM DISM Provider Store: PID=1644 TID=1656 Loading Provider from location X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD\IBSProvider.dll
- CDISMProviderStore::Internal_GetProvider
2013-12-04 19:48:22, Warning DISM DISM Provider Store: PID=1644 TID=1656 Failed to Load the provider: X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD\IBSProvider.dll.
- CDISMProviderStore::Internal_GetProvider(hr:0x8007007e)
2013-12-04 19:48:22, Info DISM DISM Provider Store: PID=1644 TID=1656 Provider has not previously been encountered. Attempting to initialize
the provider. - CDISMProviderStore::Internal_GetProvider
2013-12-04 19:48:22, Info DISM DISM Provider Store: PID=1644 TID=1656 Loading Provider from location X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD\DmiProvider.dll
- CDISMProviderStore::Internal_GetProvider
2013-12-04 19:48:22, Info DISM DISM Provider Store: PID=1644 TID=1656 Connecting to the provider located at X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD\DmiProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2013-12-04 19:48:22, Info DISM DISM Provider Store: PID=1644 TID=1656 Encountered a servicing provider, performing additional servicing initializations.
- CDISMProviderStore::Internal_LoadProvider
2013-12-04 19:48:22, Info DISM DISM OS Provider: PID=1644 TID=1656 Get the registry path to the SOFTWARE hive located at X:\Windows\system32\config\SOFTWARE
and determine if it is loaded. - CDISMOSServiceManager::DetermineBootDrive
2013-12-04 19:48:22, Info DISM DISM Driver Manager: PID=1644 TID=1656 Further logs for driver related operations can be found in the target operating
system at %WINDIR%\inf\setupapi.offline.log - CDriverManager::Initialize
2013-12-04 19:48:22, Info DISM DISM Provider Store: PID=1644 TID=1656 Provider has not previously been encountered. Attempting to initialize
the provider. - CDISMProviderStore::Internal_GetProvider
2013-12-04 19:48:22, Info DISM DISM Provider Store: PID=1644 TID=1656 Loading Provider from location X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD\UnattendProvider.dll
- CDISMProviderStore::Internal_GetProvider
2013-12-04 19:48:22, Info DISM DISM Provider Store: PID=1644 TID=1656 Connecting to the provider located at X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD\UnattendProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2013-12-04 19:48:22, Info DISM DISM Provider Store: PID=1644 TID=1656 Encountered a servicing provider, performing additional servicing initializations.
- CDISMProviderStore::Internal_LoadProvider
2013-12-04 19:48:22, Info DISM DISM Provider Store: PID=1644 TID=1656 Provider has not previously been encountered. Attempting to initialize
the provider. - CDISMProviderStore::Internal_GetProvider
2013-12-04 19:48:22, Info DISM DISM Provider Store: PID=1644 TID=1656 Loading Provider from location X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD\Wow64provider.dll
- CDISMProviderStore::Internal_GetProvider
2013-12-04 19:48:22, Warning DISM DISM Provider Store: PID=1644 TID=1656 Failed to get the IDismObject Interface - CDISMProviderStore::Internal_LoadProvider(hr:0x80004002)
2013-12-04 19:48:22, Warning DISM DISM Provider Store: PID=1644 TID=1656 Failed to Load the provider: X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD\Wow64provider.dll.
- CDISMProviderStore::Internal_GetProvider(hr:0x80004002)
2013-12-04 19:48:22, Info DISM DISM Provider Store: PID=1644 TID=1656 Provider has not previously been encountered. Attempting to initialize
the provider. - CDISMProviderStore::Internal_GetProvider
2013-12-04 19:48:22, Info DISM DISM Provider Store: PID=1644 TID=1656 Loading Provider from location X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD\SmiProvider.dll
- CDISMProviderStore::Internal_GetProvider
2013-12-04 19:48:22, Info DISM DISM Provider Store: PID=1644 TID=1656 Connecting to the provider located at X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD\SmiProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2013-12-04 19:48:22, Info DISM DISM Provider Store: PID=1644 TID=1656 Encountered a servicing provider, performing additional servicing initializations.
- CDISMProviderStore::Internal_LoadProvider
2013-12-04 19:48:22, Info DISM DISM Provider Store: PID=1644 TID=1656 Provider has not previously been encountered. Attempting to initialize
the provider. - CDISMProviderStore::Internal_GetProvider
2013-12-04 19:48:22, Info DISM DISM Provider Store: PID=1644 TID=1656 Loading Provider from location X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD\EmbeddedProvider.dll
- CDISMProviderStore::Internal_GetProvider
2013-12-04 19:48:22, Warning DISM DISM Provider Store: PID=1644 TID=1656 Failed to Load the provider: X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD\EmbeddedProvider.dll.
- CDISMProviderStore::Internal_GetProvider(hr:0x8007007e)
2013-12-04 19:48:22, Info DISM DISM Provider Store: PID=1644 TID=1656 Provider has not previously been encountered. Attempting to initialize
the provider. - CDISMProviderStore::Internal_GetProvider
2013-12-04 19:48:22, Info DISM DISM Provider Store: PID=1644 TID=1656 Loading Provider from location X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD\AppxProvider.dll
- CDISMProviderStore::Internal_GetProvider
2013-12-04 19:48:22, Info DISM DISM Provider Store: PID=1644 TID=1656 Connecting to the provider located at X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD\AppxProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2013-12-04 19:48:22, Info DISM DISM Provider Store: PID=1644 TID=1656 Encountered a servicing provider, performing additional servicing initializations.
- CDISMProviderStore::Internal_LoadProvider
2013-12-04 19:48:22, Info DISM DISM Provider Store: PID=1644 TID=1656 Provider has not previously been encountered. Attempting to initialize
the provider. - CDISMProviderStore::Internal_GetProvider
2013-12-04 19:48:22, Info DISM DISM Provider Store: PID=1644 TID=1656 Loading Provider from location X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD\AssocProvider.dll
- CDISMProviderStore::Internal_GetProvider
2013-12-04 19:48:22, Info DISM DISM Provider Store: PID=1644 TID=1656 Connecting to the provider located at X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD\AssocProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2013-12-04 19:48:22, Info DISM DISM Provider Store: PID=1644 TID=1656 Encountered a servicing provider, performing additional servicing initializations.
- CDISMProviderStore::Internal_LoadProvider
2013-12-04 19:48:22, Info DISM DISM Provider Store: PID=1644 TID=1656 Provider has not previously been encountered. Attempting to initialize
the provider. - CDISMProviderStore::Internal_GetProvider
2013-12-04 19:48:22, Info DISM DISM Provider Store: PID=1644 TID=1656 Loading Provider from location X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD\TransmogProvider.dll
- CDISMProviderStore::Internal_GetProvider
2013-12-04 19:48:22, Info DISM DISM Provider Store: PID=1644 TID=1656 Connecting to the provider located at X:\$WINDOWS.~LS\PackageTemp\3a4a5dfb-c322-402c-a12e-4f1ed21dd360\0C032313-F68B-4BD3-B62F-52A81CE58FCD\TransmogProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2013-12-04 19:48:22, Info DISM DISM Provider Store: PID=1644 TID=1656 Encountered a servicing provider, performing additional servicing initializations.
- CDISMProviderStore::Internal_LoadProvider
2013-12-04 19:48:22, Info DISM DISM Transmog Provider: PID=1644 TID=1656 Current image session is [OFFLINE] - CTransmogManager::GetMode
2013-12-04 19:48:22, Info DISM DISM Transmog Provider: PID=1644 TID=1656 Determined WinDir path = [X:\Windows] - CTransmogManager::GetWinDirPath
2013-12-04 19:48:22, Info DISM DISM Transmog Provider: PID=1644 TID=1656 GetProductType: ProductType = [ServerNT] - CTransmogManager::GetProductType
2013-12-04 19:48:22, Info DISM DISM Transmog Provider: PID=1644 TID=1656 Product Type: [ServerNT] - CTransmogManager::Initialize
2013-12-04 19:48:22, Info DISM DISM Transmog Provider: PID=1644 TID=1656 Product Type ServerNT : [Yes] - CTransmogManager::Initialize
2013-12-04 19:48:22, Info DISM DISM.EXE: Got the collection of providers. Now enumerating them to build the command table.
2013-12-04 19:48:22, Info DISM DISM.EXE: Attempting to add the commands from provider: DISM Log Provider
2013-12-04 19:48:22, Info DISM DISM.EXE: Attempting to add the commands from provider: OSServices
2013-12-04 19:48:22, Info DISM DISM.EXE: Attempting to add the commands from provider: DISM Package Manager
2013-12-04 19:48:22, Info DISM DISM.EXE: Succesfully registered commands for the provider: DISM Package Manager.
2013-12-04 19:48:22, Info DISM DISM.EXE: Attempting to add the commands from provider: MsiManager
2013-12-04 19:48:22, Info DISM DISM.EXE: Succesfully registered commands for the provider: MsiManager.
2013-12-04 19:48:22, Info DISM DISM.EXE: Attempting to add the commands from provider: IntlManager
2013-12-04 19:48:22, Info DISM DISM.EXE: Succesfully registered commands for the provider: IntlManager.
2013-12-04 19:48:22, Info DISM DISM.EXE: Attempting to add the commands from provider: DriverManager
2013-12-04 19:48:22, Info DISM DISM.EXE: Succesfully registered commands for the provider: DriverManager.
2013-12-04 19:48:22, Info DISM DISM.EXE: Attempting to add the commands from provider: DISM Unattend Manager
2013-12-04 19:48:22, Info DISM DISM.EXE: Succesfully registered commands for the provider: DISM Unattend Manager.
2013-12-04 19:48:22, Info DISM DISM.EXE: Attempting to add the commands from provider: SmiManager
2013-12-04 19:48:22, Info DISM DISM.EXE: Attempting to add the commands from provider: AppxManager
2013-12-04 19:48:22, Info DISM DISM.EXE: Succesfully registered commands for the provider: AppxManager.
2013-12-04 19:48:22, Info DISM DISM.EXE: Attempting to add the commands from provider: AssocManager
2013-12-04 19:48:22, Info DISM DISM.EXE: Succesfully registered commands for the provider: AssocManager.
2013-12-04 19:48:22, Info DISM DISM.EXE: Attempting to add the commands from provider: Edition Manager
2013-12-04 19:48:22, Info DISM DISM.EXE: Succesfully registered commands for the provider: Edition Manager.
2013-12-04 19:48:22, Info DISM DISM Provider Store: PID=1644 TID=1672 Getting Provider DISM Package Manager - CDISMProviderStore::GetProvider
2013-12-04 19:48:22, Info DISM DISM Provider Store: PID=1644 TID=1672 Provider has previously been initialized. Returning the existing instance.
- CDISMProviderStore::Internal_GetProvider
2013-12-04 19:48:22, Info DISM DISM Package Manager: PID=1644 TID=1672 Processing the top level command token(is-serviceable). - CPackageManagerCLIHandler::Private_ValidateCmdLine
2013-12-04 19:48:22, Info DISM DISM Package Manager: PID=1644 TID=1672 Attempting to route to appropriate command handler. - CPackageManagerCLIHandler::ExecuteCmdLine
2013-12-04 19:48:22, Info DISM DISM Package Manager: PID=1644 TID=1672 Routing the command... - CPackageManagerCLIHandler::ExecuteCmdLine
2013-12-04 19:48:23, Info DISM DISM Provider Store: PID=1644 TID=1672 Found the OSServices. Waiting to finalize it until all other providers
are unloaded. - CDISMProviderStore::Final_OnDisconnect
2013-12-04 19:48:23, Info DISM DISM Provider Store: PID=1644 TID=1672 Found the OSServices. Waiting to finalize it until all other providers
are unloaded. - CDISMProviderStore::Final_OnDisconnect
2013-12-04 19:48:23, Info DISM DISM Provider Store: PID=1644 TID=1672 Found the PE Provider. Waiting to finalize it until all other providers
are unloaded. - CDISMProviderStore::Final_OnDisconnect
2013-12-04 19:48:23, Info DISM DISM Provider Store: PID=1644 TID=1672 Finalizing the servicing provider(DISM Package Manager) - CDISMProviderStore::Internal_DisconnectProvider
2013-12-04 19:48:23, Info DISM DISM Package Manager: PID=1644 TID=1672 Finalizing CBS core. - CDISMPackageManager::Finalize
2013-12-04 19:48:23, Info DISM DISM Provider Store: PID=1644 TID=1672 Disconnecting Provider: DISM Package Manager - CDISMProviderStore::Internal_DisconnectProvider
2013-12-04 19:48:23, Info DISM DISM Provider Store: PID=1644 TID=1672 Finalizing the servicing provider(MsiManager) - CDISMProviderStore::Internal_DisconnectProvider
2013-12-04 19:48:23, Info DISM DISM Provider Store: PID=1644 TID=1672 Disconnecting Provider: MsiManager - CDISMProviderStore::Internal_DisconnectProvider
2013-12-04 19:48:23, Info DISM DISM Provider Store: PID=1644 TID=1672 Finalizing the servicing provider(IntlManager) - CDISMProviderStore::Internal_DisconnectProvider
2013-12-04 19:48:23, Info DISM DISM Provider Store: PID=1644 TID=1672 Disconnecting Provider: IntlManager - CDISMProviderStore::Internal_DisconnectProvider
2013-12-04 19:48:23, Info DISM DISM Provider Store: PID=1644 TID=1672 Finalizing the servicing provider(DriverManager) - CDISMProviderStore::Internal_DisconnectProvider
2013-12-04 19:48:23, Info DISM DISM Provider Store: PID=1644 TID=1672 Disconnecting Provider: DriverManager - CDISMProviderStore::Internal_DisconnectProvider
2013-12-04 19:48:23, Info DISM DISM Provider Store: PID=1644 TID=1672 Finalizing the servicing provider(DISM Unattend Manager) - CDISMProviderStore::Internal_DisconnectProvider
2013-12-04 19:48:23, Info DISM DISM Provider Store: PID=1644 TID=1672 Disconnecting Provider: DISM Unattend Manager - CDISMProviderStore::Internal_DisconnectProvider
2013-12-04 19:48:23, Info DISM DISM Provider Store: PID=1644 TID=1672 Finalizing the servicing provider(SmiManager) - CDISMProviderStore::Internal_DisconnectProvider
2013-12-04 19:48:23, Info DISM DISM Provider Store: PID=1644 TID=1672 Disconnecting Provider: SmiManager - CDISMProviderStore::Internal_DisconnectProvider
2013-12-04 19:48:23, Info DISM DISM Provider Store: PID=1644 TID=1672 Finalizing the servicing provider(AppxManager) - CDISMProviderStore::Internal_DisconnectProvider
2013-12-04 19:48:23, Info DISM DISM Provider Store: PID=1644 TID=1672 Disconnecting Provider: AppxManager - CDISMProviderStore::Internal_DisconnectProvider
2013-12-04 19:48:23, Info DISM DISM Provider Store: PID=1644 TID=1672 Finalizing the servicing provider(AssocManager) - CDISMProviderStore::Internal_DisconnectProvider
2013-12-04 19:48:23, Info DISM DISM Provider Store: PID=1644 TID=1672 Disconnecting Provider: AssocManager - CDISMProviderStore::Internal_DisconnectProvider
2013-12-04 19:48:23, Info DISM DISM Provider Store: PID=1644 TID=1672 Finalizing the servicing provider(Edition Manager) - CDISMProviderStore::Internal_DisconnectProvider
2013-12-04 19:48:23, Info DISM DISM Provider Store: PID=1644 TID=1672 Disconnecting Provider: Edition Manager - CDISMProviderStore::Internal_DisconnectProvider
2013-12-04 19:48:23, Info DISM DISM Provider Store: PID=1644 TID=1672 Releasing the local reference to OSServices. - CDISMProviderStore::Internal_DisconnectProvider
2013-12-04 19:48:23, Info DISM DISM Provider Store: PID=1644 TID=1672 Disconnecting Provider: OSServices - CDISMProviderStore::Internal_DisconnectProvider
2013-12-04 19:48:24, Info DISM DISM OS Provider: PID=1644 TID=1672 Successfully unloaded all registry hives. - CDISMOSServiceManager::Final_OnDisconnect
2013-12-04 19:48:24, Info DISM DISM Provider Store: PID=1644 TID=1672 Releasing the local reference to DISMLogger. Stop logging. - CDISMProviderStore::Internal_DisconnectProvider
2013-12-04 19:48:24, Info DISM DISM.EXE: Image session has been closed. Reboot required=no.
2013-12-04 19:48:24, Info DISM DISM.EXE:
2013-12-04 19:48:24, Info DISM DISM.EXE: <----- Ending Dism.exe session ----->
2013-12-04 19:48:24, Info DISM DISM.EXE:
2013-12-04 19:48:24, Info DISM DISM Provider Store: PID=1612 TID=1616 Found the OSServices. Waiting to finalize it until all other providers
are unloaded. - CDISMProviderStore::Final_OnDisconnect
2013-12-04 19:48:24, Info DISM DISM Provider Store: PID=1612 TID=1616 Disconnecting Provider: FolderManager - CDISMProviderStore::Internal_DisconnectProvider
2013-12-04 19:48:24, Info DISM DISM Provider Store: PID=1612 TID=1616 Disconnecting Provider: Compatibility Manager - CDISMProviderStore::Internal_DisconnectProvider
2013-12-04 19:48:24, Info DISM DISM Provider Store: PID=1612 TID=1616 Releasing the local reference to DISMLogger. Stop logging. - CDISMProviderStore::Internal_DisconnectProvider -
Hi All Guru's of Nokia Forum,
I have found another issue with my N73 phone, it does not allow me to add/read animated images in SMS's, and also smilies looks like text messages instead of actual smilies when we send or read SMS. I found animated SMS software in net but it is not free it costs around 3 Euro.
I guess this is also a Basic feature which comes in any other mobiles, I am not sure why Nokia don't add this features! Is it indirectly supporting private software market so that Nokia mobile users can go n buy those software’s to make them Rich?
Any body Pl let me know how can I read/send smilies which looks similar to yahoo smilies through SMS's in N73.
(Note: My previous topic "Animated wallpaper for N-Series mobiles" discussed about another issue with N-Series, you are welcome to reply for that thread too.)
Thanks,
Dileep.07-Nov-200702:44 PM
android wrote:
The hitch here in having that software for smileys, is that the other phone receiving it should have the software too, else they will see what you saw in your phone without that software.
Incorrect.
Other phones see the smilies as normal (either as text smilies or that phones own picture smilies). The message are still sent as a standard text message, not picture messages so there is no additional messaging costs.
The program will convert incoming messages smilies so you will receive messages with smilies.
The only people that won't see the smilies are people with older incompatible phones or those with smartphones without the software. These people will see standard text smilies.
.Message Edited by psychomania on 07-Nov-200702:54 PM -
DAC Direct Addressing for M Series
Hello,
I am writing drivers using register level access for the M series cards (particularly the 6259) and would like to directly access the DAC registers (ie., via the DAC_Direct_Data[i] registers) using immediate update mode. I have been unable to get them outputing a voltage.
I have the ddk examples, but I am unsure about the offsets for these registers and the corresponding AO_Config_Bank registers. Also, the mseries_registermap.doc does not contain these registers (in particular the register contents for the Config_Bank).
If you could point me in the direction of the register addresses and their contents I would much appreciate it.
Many thanks,
ErnHi Pennells-
The 6010 is indeed similar to a 622x in AI terms, but in AO it's quite different. For AO, the 6010 uses the STCII general purpose PWM channels to create the AO data. I haven't had time to create an example yet, but here are some notes that might help you get started.
Each AO channel uses two of the Gen_PWM instances defined in tMSeries.h. For the sake of discussion, the PWM channels will be referred to upper and lower. These are the PWM channel values for their corresponding AO channels:
AO 0
upper = 0
lower = 2
AO 1
upper = 1
lower = 3
The actual register values to write to these PWM channels are as follow (where 'value' represents a normal 16-bit binary value, i.e. not 2's complement):
upperPWMValue = ((value >> 7) & 0x1FF) + 256;
lowerPWMValue = ((value & 0x7F) * 1564) / 1000 + 768;
Hopefully this helps-
Tom W
National Instruments -
When will nokia develop new firmware with demand paging for e-series devices like e61i, e65 and e90 ? we already know that n95 has demand paging. Even n73 has it in the latest firmware. This had sped up n73 tremendously (note: n73 is older than most e-series & it does not have wifi)
so my question is :
1) is demand paging exclusive for n-series ?
2) will future versions of firmware for e-series devices have
demand paging ?
3) will there be new versions of firmware for e-series devices as
fast as nokia has developed new firmware for n-series
almost every 3-6 months for each n-series model.Jaakko Kaidesoja
N-Gage boss: 'We're not scared of the PlayStation phone'
N73 will be one of the mobiles supporting the new n-gage platfrom
http://www.pocketgamer.co.uk/r/N-Gage/N-Gage+(next+gen+platform)/news.asp?c=5917
The N82 and both N95 handsets will be next in line for the commercial launch, but bad news N73 owners: you're going to have to wait a while.
"We promised the N73 earlier, but we found some memory issues, as it has a lower memory spec than other devices," says Kaidesoja. "That gives some headaches, but we'll deal with that, and will release for the device during the second quarter."
so clearly from here we can understand that something drastic is going to be done to the n73 yet again... to support the new n-gage platfrom and improve its performace.... why these improvements are never made to the e-series ?
PS : can anyone enlighten me on the processor specs for both n73 and e61i...
Message Edited by jananan on 02-Mar-2008 08:25 PM -
Item Conversion Template Issue for Oracle Migration - Copy functionality
Hi,
I am working on Migration project which is from Radius ERP to Oracle 11.5.10.2.
Currently working on Item Conversion. This Item conversion having the fileds like (ORGANIZATION_ID,SEGMENT1,DESCRIPTION,ITEM_TYPE,COST_OF_SALES_ACCOUNT,SALES_ACCOUNT,ATTRIBUTE_CATEGORY,ATTRIBUTE1,ATTRIBUTE2,ATTRIBUTE3,ATTRIBUTE4,ATTRIBUTE5,ATTRIBUTE6,ATTRIBUTE7,ATTRIBUTE8,ATTRIBUTE9,ATTRIBUTE10,ATTRIBUTE11,ATTRIBUTE12,ATTRIBUTE13,ATTRIBUTE14,ATTRIBUTE15,GLOBAL_ATTRIBUTE10,REF_INVENTORY_ITEM_ID,REF_ORGANIZATION_ID).
I have validated those fields and loaded into interfacing to Oracle Successfully in the master Org and Validated through Frontend.
when I close the form, I will be receiving the below warning message and telling that Template id needs to be assign to the item before assigning item to the Org. The message is showing like
"*You have not applied a template to this item, please apply a template before assigning this item to an ORG.*"
Please find the below package which I wrote for this conversion requirement.
The customer is saying like need to achieve the copy functionality based on the "REF_INVENTORY_ITEM_ID and REF_ORGANIZATION_ID".
The Issue is am not able to handle the copy functionality and getting above message. kindly refer the package and suggest me where i am doing the mistake. Its high priority issue for me.
Thanks in advance.
CREATE OR REPLACE PACKAGE APPS.xxxx_inv_items_conv_pkg
AS
PROCEDURE xxx_item_conversion_proc (
errbuf OUT VARCHAR2,
retcode OUT VARCHAR2,
p_org_id IN NUMBER,
-- p_commit_point IN NUMBER,
p_load_code IN VARCHAR2
IS
<<Local Variables Declaration>> <<For space limit deleted these variables>>
CURSOR cur_item_master (pc_org_code VARCHAR2)
IS
SELECT itemstg.*
FROM xxx_inv_system_items_stg itemstg
WHERE itemstg.organization_id = pc_org_code
AND itemstg.status_flag IS NULL;
CURSOR cur_item_master_dup (pc_org_code VARCHAR2)
IS
SELECT itemstg.segment1, itemstg.organization_id
FROM xxx_inv_system_items_stg itemstg
WHERE itemstg.ROWID <
(SELECT MAX (b.ROWID)
FROM xxx_inv_system_items_stg b
WHERE b.segment1 = itemstg.segment1
AND b.organization_id = itemstg.organization_id
AND b.organization_id = pc_org_code
AND itemstg.status_flag IS NULL
AND b.status_flag IS NULL);
BEGIN
IF p_load_code = 'Insert'
THEN
l_transaction_type := 'CREATE'; -- Default Value in I/F Table
ELSIF p_load_code = 'Update'
THEN
l_transaction_type := 'UPDATE'; -- Default Value in I/F Table
END IF;
DBMS_OUTPUT.put_line ( 'Validation Starts At :'
|| TO_CHAR (SYSDATE, 'DD-MON-YYYY HH24:MI:SS')
--Checking for Duplicate Records items
BEGIN
UPDATE xxx_inv_system_items_stg a
SET a.status_flag = 'E',
a.error_message = 'Duplicate Record'
WHERE a.ROWID >
ANY (SELECT b.ROWID
FROM xxx_inv_system_items_stg b
WHERE a.segment1 = b.segment1
AND a.organization_id = b.organization_id)
AND a.organization_id = p_org_id
AND a.status_flag IS NULL;
EXCEPTION
WHEN OTHERS
THEN
DBMS_OUTPUT.put_line ('Exception in updating duplicates'
|| SQLERRM
END;
DBMS_OUTPUT.put_line ('CheckPoint: Duplicate Record');
BEGIN
SELECT organization_id
INTO l_organization_id
FROM org_organization_definitions
WHERE organization_id = p_org_id;
EXCEPTION
WHEN NO_DATA_FOUND
THEN
DBMS_OUTPUT.PUT_LINE(p_org_id||' Org Does Not Exist');
-- p_retcode := '2';
WHEN OTHERS
THEN
DBMS_OUTPUT.PUT_LINE('Exception in Getting Org Id'||'Cannot Proceed');
-- p_retcode := '2';
END ;
DBMS_OUTPUT.put_line ('CheckPoint: Orgcode' || l_organization_id);
/* IF p_retcode = '2'
THEN
RETURN;
END IF;*/
--Block : Setting Master and Validation Orgs Flags
BEGIN
SELECT DECODE (master_organization_id, l_organization_id, 'Y', 'N'),
master_organization_id
INTO l_master_org,
l_master_org_id
FROM mtl_parameters
WHERE organization_id = l_organization_id;
EXCEPTION
WHEN OTHERS
THEN
l_master_org := 'N';
l_master_org_id := NULL;
DBMS_OUTPUT.PUT_LINE(p_org_id||' Org Does Not Exist');
END ;
DBMS_OUTPUT.put_line ('master_organization_id');
SELECT fnd_profile.VALUE ('USER_ID')
INTO l_user_id
FROM DUAL;
-- Block : Set the SET_PROCESS_ID
l_set_process_id := l_organization_id;
l_insert_count := 0;
LOOP
BEGIN
SELECT COUNT (segment1)
INTO l_insert_count
FROM mtl_system_items_interface
WHERE set_process_id = l_set_process_id
AND transaction_type = l_transaction_type
AND process_flag = 1;
EXCEPTION
WHEN OTHERS
THEN
l_insert_count := 0;
END;
EXIT WHEN l_insert_count = 0;
l_set_process_id := l_set_process_id + 10;
END LOOP;
DBMS_OUTPUT.put_line ('SET PROCESS ID -l_insert_count ' || l_insert_count);
IF p_load_code = 'Insert'
THEN
BEGIN
FOR recitem_data IN cur_item_master_dup (p_org_id)
LOOP
UPDATE xxx_inv_system_items_stg
SET status_flag = l_processed_flag,
error_message = l_error_message
WHERE segment1 = recitem_data.segment1
AND organization_id = recitem_data.organization_id
AND status_flag IS NULL;
COMMIT;
END LOOP;
EXCEPTION
WHEN OTHERS
THEN
DBMS_OUTPUT.put_line ( 'Update of Duplicates Failed : '
|| SQLCODE
|| '--'
|| SQLERRM
END ;
END IF;
FOR recitem_data IN cur_item_master (p_org_id)
LOOP
<<Local Variables Declaration>> <<For space limit deleted these variables>>
IF p_load_code = 'Update'
THEN
l_error_message := 'Update Mode' || l_error_delimiter;
END IF;
--l_count := -1;
BEGIN
DBMS_OUTPUT.put_line ('CheckPoint: ItemValidationStart');
SELECT DISTINCT inventory_item_id,
restrict_subinventories_code,
restrict_locators_code
INTO l_inventory_item_id,
l_restrict_subinventories_code,
l_restrict_locators_code
FROM apps.mtl_system_items_b msi
WHERE msi.organization_id = l_organization_id
AND msi.segment1 = UPPER (recitem_data.segment1);
EXCEPTION
WHEN NO_DATA_FOUND
THEN
l_count := 0;
-- l_processed_flag := 'F';
DBMS_OUTPUT.put_line ('inventory_item_id - AFTER MAIN LOOP' || l_inventory_item_id||'-'||l_processed_flag);
DBMS_OUTPUT.put_line ('inventory_item_id - AFTER MAIN LOOP' || l_inventory_item_id||'-'||recitem_data.ref_inventory_item_id);
WHEN OTHERS
THEN
l_count := -1;
-- l_processed_flag := 'F';
DBMS_OUTPUT.put_line ('inventory_item_id - AFTER MAIN LOOP' || l_inventory_item_id||'-'||l_processed_flag);
END ;
DBMS_OUTPUT.put_line ('inventory_item_id - AFTER MAIN LOOP'||recitem_data.ref_inventory_item_id);
IF l_count = -1
THEN
l_processed_flag := 'F';
l_error_message :=
l_error_message
|| 'Exception - Checking Item already Present'
|| l_error_delimiter;
DBMS_OUTPUT.put_line ('Exception - Checking Item already Present'||l_processed_flag);
ELSIF (l_count > 0 AND p_load_code = 'Insert')
THEN
l_processed_flag := 'F';
l_error_message :=
l_error_message
|| 'Item Already Exists In '
|| p_org_id
|| ' Organization '
|| l_error_delimiter;
DBMS_OUTPUT.put_line ('Exception - Checking Item already Present1'||l_processed_flag);
ELSIF (l_count = 0 AND p_load_code = 'Update')
THEN
l_processed_flag := 'F';
l_error_message :=
l_error_message
|| 'Item Not Present In '
|| p_org_id
|| ' Organization '
|| l_error_delimiter;
DBMS_OUTPUT.put_line ('Exception - Checking Item already Present2'||l_processed_flag);
END IF;
BEGIN
SELECT count(*)
INTO l_seg_count
FROM apps.mtl_system_items_b msi
WHERE msi.organization_id = l_organization_id
AND msi.segment1 = UPPER (recitem_data.segment1);
EXCEPTION
WHEN NO_DATA_FOUND
THEN
l_seg_count := 0;
l_processed_flag:='F';
l_error_message :=
l_error_message
|| 'Item Not Present In Oracle'
|| p_org_id
|| ' Organization '
|| l_error_delimiter;
DBMS_OUTPUT.put_line ('inventory_item_id - l_seg_count ' ||l_seg_count||'-'||l_processed_flag );
WHEN OTHERS
THEN
l_seg_count := -1;
l_processed_flag:='F';
l_error_message :=
l_error_message
|| 'Item Not Present In Oracle'
|| p_org_id
|| ' Organization '
|| l_error_delimiter;
END ;
IF p_load_code = 'Insert'
THEN
IF l_organization_id != l_master_org_id
THEN
BEGIN
SELECT COUNT (1)
INTO l_org_item_count
FROM apps.mtl_system_items_b msi
WHERE msi.organization_id = l_master_org_id
AND msi.segment1 = UPPER (recitem_data.segment1);
EXCEPTION
WHEN NO_DATA_FOUND
THEN
l_org_item_count := 0;
DBMS_OUTPUT.put_line ('l_org_item_count ' ||l_org_item_count||'-'||l_processed_flag );
WHEN OTHERS
THEN
l_org_item_count := -1;
END ;
IF l_org_item_count = -1
THEN
l_processed_flag := 'F';
l_error_message :=
l_error_message
|| 'Exception - Checking Item in Master '
|| l_error_delimiter;
ELSIF l_org_item_count = 0
THEN
l_processed_flag := 'F';
l_error_message :=
l_error_message
|| 'Item Does Not Exist in Master '
|| l_error_delimiter;
END IF;
END IF;
END IF;
DBMS_OUTPUT.put_line ( 'CheckPoint: Iteminmasterorg'
|| l_org_item_count
IF (recitem_data.description IS NULL AND p_load_code = 'Insert')
THEN
l_processed_flag := 'F';
l_error_message :=
l_error_message || 'Description is NULL' || l_error_delimiter;
END IF;
IF (recitem_data.sales_account IS NOT NULL)
THEN
BEGIN
SELECT code_combination_id
INTO l_sales_account
FROM gl_code_combinations_kfv
WHERE code_combination_id= recitem_data.sales_account;
EXCEPTION
WHEN NO_DATA_FOUND
THEN
-- l_processed_flag := 'F'; --QUESTION
l_error_message :=
l_error_message
|| 'Sales Account Not Setup '
|| l_error_delimiter;
DBMS_OUTPUT.put_line ( 'CheckPoint: Salesacct_Validation'
|| l_sales_account||'-'||l_processed_flag
WHEN OTHERS
THEN
l_processed_flag := 'F';
l_error_message :=
l_error_message
|| 'Sales Account Exception '
|| SQLERRM
|| l_error_delimiter;
DBMS_OUTPUT.put_line ( 'CheckPoint: Salesacct_Validation'
|| l_sales_account||'-'||l_processed_flag
END ;
END IF;
IF (recitem_data.cost_of_sales_account IS NOT NULL)
THEN
BEGIN
SELECT code_combination_id
INTO l_cost_of_sales_account
FROM gl_code_combinations_kfv
WHERE code_combination_id =
recitem_data.cost_of_sales_account;
EXCEPTION
WHEN NO_DATA_FOUND
THEN
l_processed_flag := 'F';
l_error_message :=
l_error_message
|| 'COGS Account Not Setup '
|| l_error_delimiter;
DBMS_OUTPUT.put_line ( 'l_cost_of_sales_account'
|| l_cost_of_sales_account||'-'||l_processed_flag
WHEN OTHERS
THEN
l_processed_flag := 'F';
l_error_message :=
l_error_message
|| 'COGS Account Exception '
|| SQLERRM
|| l_error_delimiter;
DBMS_OUTPUT.put_line ( 'l_cost_of_sales_account'
|| l_cost_of_sales_account||'-'||l_processed_flag
END check_cogs_account;
END IF;
BEGIN
select distinct organization_code
into l_ref_org_code
from org_organization_definitions
where organization_id = recitem_data.ref_organization_id ;
EXCEPTION
WHEN OTHERS THEN
l_ref_org_code:= NULL;
l_processed_flag:='F';
l_error_message :=
l_error_message
|| 'Reference Org Not Present'
|| p_org_id
|| ' Organization '
|| l_error_delimiter ;
DBMS_OUTPUT.put_line ('l_ref_org_code'|| l_ref_org_code||'-'||l_processed_flag);
END;
BEGIN
select concatenated_segments
into l_ref_inventory_item_code
from mtl_system_items_kfv
where inventory_item_id = recitem_data.ref_inventory_item_id
and organization_id = recitem_data.ref_organization_id ;
EXCEPTION
WHEN OTHERS THEN
l_ref_inventory_item_code :=NULL;
l_processed_flag:='F';
l_error_message :=
l_error_message
|| 'Reference Item Not Present'
|| p_org_id
|| ' Organization '
|| l_error_delimiter;
DBMS_OUTPUT.put_line ('l_ref_inventory_item_code'|| l_ref_inventory_item_code||'-'||l_processed_flag);
END;
IF (l_master_org = 'N' AND p_load_code = 'Insert')
THEN
BEGIN
SELECT count(*)
INTO l_description_count
FROM mtl_system_items_tl
WHERE organization_id = l_master_org_id
AND inventory_item_id =
(SELECT inventory_item_id
FROM mtl_system_items_b
WHERE organization_id = l_master_org_id
AND segment1 = recitem_data.segment1);
END ;
IF l_description_count > 0 THEN
l_processed_flag:='F';
l_error_message :=
l_error_message
|| 'Item Description Not Present'
|| p_org_id
|| ' Organization '
|| l_error_delimiter;
END IF;
END IF;
IF l_processed_flag = 'S'
THEN
BEGIN
INSERT INTO mtl_system_items_interface
(organization_id,
segment1,
description,
ITEM_TYPE,
COST_OF_SALES_ACCOUNT,
SALES_ACCOUNT,
attribute_category,
set_process_id,
transaction_type,
process_flag,
copy_organization_code,
copy_item_number,
creation_date,
created_by,
last_updated_by,
last_update_date
--attribute_category
, attribute1
, attribute2
,attribute3
,attribute4
,attribute5
,attribute6
,attribute7
,attribute8
,attribute9
,attribute10
,attribute11
,attribute12
,attribute13
,attribute14
,attribute15
,global_attribute10
VALUES (l_organization_id,
recitem_data.segment1,
recitem_data.description,
recitem_data.ITEM_TYPE,
recitem_data.COST_OF_SALES_ACCOUNT,
recitem_data.SALES_ACCOUNT,
recitem_data.ATTRIBUTE_CATEGORY,
l_set_process_id,
l_transaction_type, --,l_transaction_type
l_process_flag,
l_ref_org_code,
l_ref_inventory_item_code,
SYSDATE, l_user_id,
l_user_id, SYSDATE
-- l_attribute_category
,recitem_data.attribute1
,recitem_data.attribute2
,recitem_data.attribute3
,recitem_data.attribute4
,recitem_data.attribute5
,recitem_data.attribute6
,recitem_data.attribute7
, recitem_data.attribute8
,recitem_data.attribute9
, recitem_data.attribute10
,recitem_data.attribute11
,recitem_data.attribute12
,recitem_data.attribute13
,recitem_data.attribute14
,recitem_data.attribute15
, substr(recitem_data.global_attribute10,1,length(recitem_data.global_attribute10)-1) --recitem_data.global_attribute10
l_insert_count := l_insert_count + 1;
/* IF (l_insert_count = NVL (p_commit_point, 10000))
THEN
-- l_set_process_id := l_set_process_id + 10; -- REVERT BACK CHANGE
l_insert_count := 0;
END IF;
EXCEPTION
WHEN OTHERS
THEN
l_processed_flag := 'F';
l_error_message :=
l_error_message
|| 'Error in Inserting Item '
|| SQLERRM
|| l_error_delimiter;
END ;
COMMIT;
DBMS_OUTPUT.put_line ('CheckPoint: Insertion Completed in Intfacetable');
END IF;
BEGIN
UPDATE xxx_inv_system_items_stg
SET status_flag = l_processed_flag,
error_message = l_error_message
WHERE segment1 = recitem_data.segment1
AND organization_id = recitem_data.organization_id
AND status_flag IS NULL;
COMMIT;
DBMS_OUTPUT.put_line ('Error Message'||l_error_message);
EXCEPTION
WHEN OTHERS
THEN
fnd_file.put_line (fnd_file.LOG,
'Error:Updating Item:'
|| SQLCODE
|| '-'
|| SQLERRM
END;
END LOOP; --FOR recitem_data IN cur_item_master
DBMS_OUTPUT.put_line ( 'Validation Ends At :'
|| TO_CHAR (SYSDATE, 'DD-MON-YYYY HH24:MI:SS')
DBMS_OUTPUT.put_line ('Number of records inserted into Table Successfully -->'|| l_insert_count);
END;
END xxxx_inv_items_conv_pkg;
Edited by: 896170 on Apr 12, 2013 11:58 PMIssue got solved... changed the PO line amount as:
<?xdoxslt:set_variable($_XDOCTX,'line_amt',xdoxslt:to_number(LINE_AMOUNT))?>
Reference :Syntax for 'to_number'
Regards
Manikanta Panigrahi -
Performance Issue for BI system
Hello,
We are facing performance issues for BI System. Its a preproductive system and its performance is degrading badly everyday. I was checking system came to know program buffer hit ratio is increaasing everyday due to high Swaps. So asked to change the parameter abap/buffersize which was 300Mb to 500Mb. But still no major improvement is found in the system.
There is 16GB Ram available and Server is HP-UX and with Netweaver2004s with Oracle 10.2.0.4.0 installed in it.
The Main problem is while running a report or creating a query is taking way too long time.
Kindly help me.Hello SIva,
Thanks for your reply but i have checked ST02 and ST03 and also SM50 and its normal
we are having 9 dialog processes, 3 Background , 2 Update and 1 spool.
No one is using the system currently but in ST02 i can see the swaps are in red.
Buffer HitRatio % Alloc. KB Freesp. KB % Free Sp. Dir. Size FreeDirEnt % Free Dir Swaps DB Accs
Nametab (NTAB) 0
Table definition 99,60 6.798 20.000 29.532 153.221
Field definition 99,82 31.562 784 2,61 20.000 6.222 31,11 17.246 41.248
Short NTAB 99,94 3.625 2.446 81,53 5.000 2.801 56,02 0 2.254
Initial records 73,95 6.625 998 16,63 5.000 690 13,80 40.069 49.528
0
boldprogram 97,66 300.000 1.074 0,38 75.000 67.177 89,57 219.665 725.703bold
CUA 99,75 3.000 875 36,29 1.500 1.401 93,40 55.277 2.497
Screen 99,80 4.297 1.365 33,35 2.000 1.811 90,55 119 3.214
Calendar 100,00 488 361 75,52 200 42 21,00 0 158
OTR 100,00 4.096 3.313 100,00 2.000 2.000 100,00 0
0
Tables 0
Generic Key 99,17 29.297 1.450 5,23 5.000 350 7,00 2.219 3.085.633
Single record 99,43 10.000 1.907 19,41 500 344 68,80 39 467.978
0
Export/import 82,75 4.096 43 1,30 2.000 662 33,10 137.208
Exp./ Imp. SHM 89,83 4.096 438 13,22 2.000 1.482 74,10 0
SAP Memory Curr.Use % CurUse[KB] MaxUse[KB] In Mem[KB] OnDisk[KB] SAPCurCach HitRatio %
Roll area 2,22 5.832 22.856 131.072 131.072 IDs 96,61
Page area 1,08 2.832 24.144 65.536 196.608 Statement 79,00
Extended memory 22,90 958.464 1.929.216 4.186.112 0 0,00
Heap memory 0 0 1.473.767 0 0,00
Call Stati HitRatio % ABAP/4 Req ABAP Fails DBTotCalls AvTime[ms] DBRowsAff.
Select single 88,59 63.073.369 5.817.659 4.322.263 0 57.255.710
Select 72,68 284.080.387 0 13.718.442 0 32.199.124
Insert 0,00 151.955 5.458 166.159 0 323.725
Update 0,00 378.161 97.884 395.814 0 486.880
Delete 0,00 389.398 332.619 415.562 0 244.495
Edited by: Srikanth Sunkara on May 12, 2011 11:50 AM
Maybe you are looking for
-
Authorization issue within a table in BI
Hello All, Here is my authorization issue : We have set up an authorization on infoobject Zapplication. End user is allowed to choose "HR" only. In Rsecadmin, infoObject Zapplication is restricted to "HR" Then, this authorization object has been assi
-
Calling adobe form from Web Dynpro ABAP
Hi Friends, This is the following error, which i got when i tested my application. Calling adobe form from Web Dynpro ABAP. WebDynpro Exception: ADS: Request start time: Tue Nov 16 14:00:22 YEKT 2010(200,101).
-
Is it ok to download idvd to my new iMac
is it ok to dowload idvd to my new imac. I thought it came with it but its not in my apps.
-
Is there a way to trigger the exhaust fan during video chat?
The exhaust fan usually works during say...youtube videos or other activities that heat the laptop up, but it never comes on during skype video chats. This makes the laptop extremely hot. Is there a particular reason it doesn't turn on to prevent ove
-
Hi there, Does someone have a overview (preferable in a picture) of all BW releases on a time frame? This would be helpful to create my view on this. I searched service.sap.com\bi, but could not find it. Your help would be appreciated.