Registration box keeps coming up

Hi all,
I just installed CS2 on my new PC with Windows 7 and every time I start it up it asks me to register but no matter how many times I do so it still pops up next time I start the program. I have my UAC set to minimum/none. Can anyone help? It's not life or death but boy is it annoying!
Thanks all,
Phil

Perfect! That seems to have worked! So now I have done that will it always run as admin?
Thanks so much!
Phil

Similar Messages

Registration box keeps opening when starting Photoshop

I installed Photoshop on my laptop running Windows 7. Each time I start Photoshop, a box opens up and asks me if I want to register the product. I went ahead and filled in the boxes and registered, however, the same registration box keeps opening each time Photoshop starts running. How do I stop this annoying box from opening again?

Let me guess, it's an older version of Photoshop, right?
You'll most likely get past it by doing the following:
Disable UAC, reboot Windows, run Photoshop from an Administrator account, then re-enable UAC and reboot again.
Some say just running Photoshop as Administrator will take care of the problem, but there are subtle differences between running an app As Administrator and running with UAC disabled.
Microsoft doesn't advertise it much, but the reason UAC can be disabled is that there are compatibility issues with older software than are worked around by doing so. If you choose to leave UAC disabled, you should read up on what UAC does for you and make sure you understand what additional precautions you should be taking to keep malware at bay.
-Noel

Shockwave may be busy... etc... error box keeps coming up

I am SOOOOOO sick of this issue. I have posted asking for help, advice and etc... in many different sites including THIS ONE, and no one seems to know how to fix this. For about the last month or so, I have had a problem with my adobe flash, or shockwave flash or what ever the hell you want to call it. I say this last part because I have been told they are the same, and I have been told they are different. Here is a screen shot of the damn pop up box I keep getting, it also shows how I am also often told that I need to install adobe flash to view something even though I DO have it installed already.
The issue: It seems like every couple of mins at times, my browser will freeze, then after a few seconds to mins, I get the above shown pop up box about my unresponsive plugin. Usually when I click the continue button, after a few mins the page continues to work. This usually only lasts a few mins before it freezes again and I get the pop up box AGAIN. Sometimes it stays unfrozen for a while, and I have no issues but this is very rare. Now if I click the stop plugin option, this usually makes adobe flash crash altogether, and I have to refresh everything. Sometimes my page does not unfreeze at all, even after clicking the continue button, my browser does not unfreeze, and I have to open my task manager, and shut it all down manually. As for the other issue, where I am told I have to download adobe flash to view something, this does not happen EVERY time I try viewing something, but it does happen, I would say maybe 2-8 times out of 10 it happens. It has happened while trying to view videos, commercials I get while playing games sometimes, or many other things, I am saying this because I want to make sure you understand it is NOT just when I am on facebook or something, I just happened to take the screenshot above while on FB when it happened this most recent time to make this post here with.
Ok so I have tried a LOT of things to fix this. I more then once tried uninstalling and then reinstalling adobe flash, I did so following the instructions for a CLEAN INSTALL as I was directed by someone else to try. In case the issue was something to do with my anti virus, or fire wall or etc... I have also tried uninstalling, then reinstalling while my windows firewall was turned OFF, as well as my anti virus turned off. I have tried uninstalling my browsers as well, then reinstalling them AFTER reinstalling adobe.
According to the flash checker thing on the adobe site itself, I DO have the most current version installed, I also checked the page to see if it was supposed to be working properly, and according to your site it said my adobe flash WAS working fine, the images and etc... displayed fine. All of my browsers and etc... are also ALL up to date. I have made sure that ALL of my adobe products are up to date, the reader, active x, shockwave, etc...
I have tried everything and yet I still keep getting this message box, and often enough I get the message saying adobe needs to be installed to view something. I had not installed anything, nor had I made any changes to my comp or system prior to this problem starting, though if I am not mistaken, I think I HAD just upgraded to the newest version OF adobe at the time, this was over a month ago now...
I also want to add, so that I don't start getting suggestions to do so... I do not have a virus on my comp. I have checked and rechecked my system using a few different programs like windows defender, malwarebytes, my anti virus Avast!, Spybot Search & Destroy, Microsoft Safety Scanner and possibly other ones as well, and none of them have ever found any malware, adware, or viruses.
As for my system and info: I mostly use firefox (yes most recent version), however recently I did download and try using Google Chrome in order to find out if this was a firefox issue or something, as someone suggested once. I encountered the SAME pop up box, and message while using Google Chrome, as well as while using IE, which tells me even more this is not a "browser" problem, but more an adobe/shockwave/flash or whatever problem. I have windows 7 home premium on my comp, it is the 64-bit operating system.

Here's the next things I'd try if this was my machine.
1. Revert back to a previous version of Flash Player to see if you can determine when the problem started occurring. It would be great if we could narrow this down and, for example, find that it started with 11.6.602.180. That'll give Adobe something to work with to reproduce the issue (which we have not been able to, as this would be a release blocking problem if it was easily reproducible.) From there you can choose to use the most recently working 11.x version or you can roll back to the latest 10.3 version of Flash Player to receive all of the latest security updates.
How do I revert to a previous version of Flash Player?
Where do I find previous versions of Flash Player?
2. If it happens with older versions of Flash, then I'd start to suspect something else happening on my system. First, I'd try rebooting in safe mode with networking enabled. This should disable all third party utilities and services from starting and possibly interfering with Flash Player. If Flash works fine under this mode, then it's a matter of determining what else is loading at startup and eliminating the possible causes.
http://windows.microsoft.com/en-us/windows7/start-your-computer-in-safe-mode
http://www.netsquirrel.com/msconfig/msconfig_win7.html
3. If it still occurs in Safe mode, then see if either of the two Microsoft KB updates have been applied to your system:
KB2670838 – Platform Update for Windows 7 x64
KB2670838 - Platform Update for Windows 7 x64
If so, and you have verified that all of your video drivers are up to date, uninstall them and see if that makes a difference. We've had reports from users that this can cause problems with Flash Player (though typically these symptoms are video and audio related.)
4. Finally, I'd report this as a bug to the Adobe bugbase.adobe.com bug database. Details of what we absolutely must have for investigation can be found here:
How do I report a Flash Player crash to Adobe?
After entering the bug, the next most crucial step would be telling other people with the same problem about your bug report. Provide a link to your bug here and other community locations so that people effected can add their comments and votes. A bug with no comments or votes just won't carry the same weight as a bug with multiple other users chiming in.

Registration screen keepa coming up

I have just installed CS2 on a new computer with Vista home premium and the registration screen comes up ever time I open the program. I have had CS2 on my old desktop computer and laptop using XP with no problems. The program works fine after I get the registration screen out of the way, but it is a nuisance. Can anyone provide a solution

It has to do with UAC (User Account Control). UAC isn't allowing something to be written to the registry. Turn off UAC before registering. After the computer restarts, open Photoshop and go through the registration process. You won't have to do it again.
Control Panel<User Accounts and Family Safety<User Accounts<Turn User Account on or off<uncheck the box "Use User Account (UAC) to help protect your computer"<Okay. Note: Your computer will have to do a restart for this to take effect.

Registration box keeps popping up after registration

I installed my FCP Studio 2 and opened FCP up and registered the software. I opened it up again and it the box popped up again asking me to register again. This keeps happening. Is there any way I can delete this file from popping up everytime I open FCP?
Thanks in advance

To verify what Zak Ray and David S. stated, here's Apple's official document on the issue: http://docs.info.apple.com/article.html?artnum=303184
-DH

When ever I open a new window I get a pop up box says [JavaScript Aplication] uninstal set when I click on the x or the ok the box keeps coming back

when i open firefox the window pops up
[JavaScript Application] x
uninstal set
ok
when i click either the x to close the box or the ok the box pops right back up anywhere from 3 to 30 times before it goes away as soon as i do anything and hit enter the box pops up again

This issue can be caused by an extension that isn't working properly.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
In Firefox 4 you can use one of these to start in <u>[[Safe mode]]</u>:
* Help > Restart with Add-ons Disabled
* Hold down the Shift key while double clicking the Firefox desktop shortcut (Windows)
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Like i said Microsoft outlook keeps coming up in my iTunes and a box with server name i ,v tried all the server names on my account and it will not work and now my iTunes account is stuffed

I,m sorry but i,v a enough of all these **** problems Microsoft has been on help with helping me fix this problem i,v tried everything to fix it and i do know that i,m not talking to Apple like i said this outlook from Microsoft keeps coming up every time i start my iTunes up and then it has a box with enter server name and i,v tried all the server names on my laptop and it will not accept any of them I,v spent a heep of money already with computer people and my laptop is now more stuffed and i don,t trust anyone any more my computer bloke stufhfed my iTunes account up as well and tried to tell me i had to upload a new iTunes and i fixed it up and i,v never done a computer coruse in my life sorry for the all the chat but i,m just sick of all the scams just to get money out of you one more thing my iCould is not backing up to my iCloud as well so where is all my dtuff gone to so much for security

Ande i,v got on idea where to see your relpys here this is all new to me like where are your messages here thank you

How do I get rid of a dialog box that keeps coming back even though I press Cancel?

How do I get rid of a dialog box that keeps coming back even though I press Cancel?

I was looking up Olympic stats on Norwegian website, and must have inadvertently clicked a link. The dialog box says: "There is no application set to open the URL nasjoner:2"
It goes on to tell me to search the App Store , choose an application, or cancel.

How to delete a junk mail that keeps coming back after deleting it from the junk box?

I have a junk mail from February that I really want to delete but it keeps coming back after deleting it several times. It comes back in the junk mail as 'read'.
How should I remove it?
Thanks for your help in advance!

If the email provider is Google, try going to the gmail web portal, (log on from a computer or your iPad using safari), and manually delete the contents of your junk and trash.
I did this today, and the reappearing junk has not (as of yet) reappeared. Knocking on wood.

TS3704 Trying to delete I Tunes because of missing MSVCR80.dll followed instructions from Apple to delete - Apple Mobile Device support keeps coming up its being used I have gone to program files deleted what I can from folder but left with 3 files

I have been getting the MSVCR80.dll missing message.
Been on the Apple site and following instruction.
Going down the list has instructed I have Deleted I Tunes.
Deleted Apple Software Update
But when I try to delete Apple Mobile device it wouldn't delete so went into program files has the instructions say by going to Program Files\common Files\Apple\Apple Mobile Device Support Folder.
It still wouldn't delete saying it was being used.
I opened the file and highlighted all the folders and pressed delete, most of them have disapeared into my recycle bin but the folder still holds AppleMobileService, AppleMobileDeviceService_main.dll and MobileDevice.dll.
Message when I right click the first file is AppleMobileService I am told this action can't be completed because file is open in Apple Mobile Device. Close and Try again.
When I click the next file AppleMobileDeviceService_main dll it says It comes up with This action cannot be completed and File description Apple Mobile Device Service. Company Apple Inc. File Version 17.323.0.9 Date Created 7/9/2013. Try again...... and finally MobileDevice.dll come up with same message but file version 710.0.0.4 Date Created 7/9/2013 Size 902KB Both say Try Again but the same thing just recurred.
I have left my lap top on hoping that I a swift reply.
I am certainly no computer wizard and simply trying to follow the instructions to get rid of the box which keep coming up everytime I switch the lap top on saying APS Daemon.exe-System Error. The program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program to fix this problem. I had looked at the internet and there appears to be warnings not to click on the button.
I have had an apdate from Apple for the I Tunes but it wouldn't update. I thought that may have sorted it so whilst I had a few hours I thought I would go through the process that is advised on Apple's website.
I hope I have not ruined my computer. I haven't even tried deleting Bonjour or Apple Application Support (I Tunes 9 or later) has these are supposed to come after the step I am on.
Please HELP!!!!!

Sorry I missed your post. Anyone else with the same issue should find useful resources at Troubleshooting issues with iTunes for Windows updates.
tt2

Stor.e TV+ No Loader error keeps coming up when switching on

I have been experiencing continual problems accessing the hard drive. "No Loader" error message keeps coming up when switching on.
The so-called "solution" to this problem posted on this forum is to open up the box and fiddle with the cables. Whilst I have had some success with this method initially, dismantling the box 10 times a week is not on.
I tried something else in desperation.
When the No Loader message comes up, I switch the box off and on again from the remote.
After 2 or 3 times or so the HDD folder usually appears.
I have been doing this consistently now with great success. This however suggests that the No Loader error message is NOT a mechanical connector problem with the hard drive but (as usual) poor software (what else?).
Dismantling the unit is tantamount to switching it off for an extended period of time so may explain why this technique works.
Switching the unit on and off several times also solves the problem of the D folder not appearing on the network even though Win7 shows Store-TV-Plus as a mapped NTFS drive (but can't find the D folder).
See the similarity?
Another thing that exacerbates problems is the unit's poor ventilation. The first thing that happens with this unit is that the rubbish stick-on rubber feet fall off.
Whilst this may seem innocuous, the ventilation slots are underneath the unit and will be blocked if there are no feet. I live in a hot country so this device gets pretty hot and behaves even more erratically unless well ventilated.
Ideally keep it well away from other units and preferably sit it on a small box by itself with the vents underneath well exposed.
I also still experience problems playing FLAC and MKV files. The unit occasionally loses synch with FLAC files which generally otherwise play OK and locks up or causes loud bangs or white noise on the speakers (dangerous).
Some MKV files just don't play at all even though VLC plays them. There are a myriad other inconsistencies but these are the most annoying.
Is anyone else experiencing these problems or does anyone have any other solutions to prevent these problems?
I don't suppose we can expect another software upgrade from Toshiba? In your dreams, pal.

OK, so I took the risk and updated the firmware of my Stor.e TV+ to the Noontec V8S latest firmware V3.0816.13_V8S from noontec website.
The update went fine without a hitch (took about 2 minutes from an old 256MB flash drive plugged into the back USB port of the unit, which I formatted before using), and some of the irritating shortcomings of the Toshiba firmware was solved. Samba worked in some fashion, but I was still not able to download songs directly to the Stor.e over wireless, which is the only other feature I currently need. The irritating remote control buttons were changed to the way any sane person would use them (I had changed my universal remote control to correct this, so would have to change the settings if I kept the updated firmware) The new firmware seems solid, but I DON'T USE THE VIDEO CAPABLITIES, so I can't comment on this.
One major drawback of this update for me is that the small display on the unit becomes much less readable. Seems like there is a problem with the font on the new firmware. I use my Stor.e exclusively as a flac music player, and since I don't have it connected to a tv the small display is crucial for me to select tracks or disks. I have 300+ discs, so the Stor.e is an excellent cheap media player which I connect to my HIFI system via a DAC.
I thus had to change back to the Toshiba firmware to correct this problem. Seems like I would still have to use USB to download music to the Stor.e when I buy new CDs. What a pity.
Incidentally, the new Toshiba firmware is very much like the old firmware, in that it lacks the capability to switch on Samba. In the readme Toshiba states that the new firmware fixes a network problem, but I think that this is probably the smallest issue most users have with the Toshiba firmware.
So, my advice to anyone having video, control or other issues with the Toshiba firmware is to flash to the Noontec firmware to see if it resolves their issues. If it doesn't one can always revert to the official Toshiba firmware as I did.
You do this at your own risk though, if you brick your unit don't blame me...

I dont know what to do i try install itunes and this keeps coming up "itunes was not installed correctly. please reinstall itunes error 7 (windows error 127)" what should i do?

i dont know what to do i try install itunes and this keeps coming up "itunes was not installed correctly. please reinstall itunes error 7 (windows error 127)" what should i do?

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

PDF files keep coming with old file name not as current file name

Hi,
I have a problem when exporting InDesign docs to PDF with some documnets. If I change the name in the export dialog box, then every time I export this doc to PDF in the future this name keep coming, even when I change the name of the document or save it in a new name. This causes confusion, since sometimes the name is completely different from the InDesign file name. What can be done to tell InDesign to save the exported PDF file according to the current file name and don’t remember the old PDF file name?
I was thinking of a script, is there a ready one to use?
Thanks

Thanks for the tips, very useful indeed.
Though it is bit hard to have everyone in the studio follow them as a routine. I way I used to do this is to go to Save as command, with right mouse I choose copy the highlighted document name, then I choose cancel, then when I choose to export I'll paste the the name which is the current file name, this is good for me, but I wouldn't dream of having this as a routine for everyone in the studio.
I was thinking it would be easy if I can find a script, since I don't know scripting, to do just that, i.e. have Indesign to copy the current filename of the document (whether by doing the same trick as I am doing or if there is a direct command to do that in the script), then the script will go to the export dialog box, paste that name, then I will go on with the normal export dialog box options.
This script will be easier to have everybody in the studio to follow.
Appreciate your help.
Thanks

Acrobat Pro for Mac bought on Amazon;how can I register it?. registration code they give me, it doesn't work. (It has letters and the registration boxes won't accept letters.) How do I get this to work?

I purchased Acrobat Pro for Mac on Amazon. When I try to register with the registration code they give me, it doesn't work. (It has letters and the registration boxes won't accept letters.) How do I get this to work?

If you don't have original install disks for your Mac, you can order replacements disks directly from Apple at a nominal cost. The original install DVDs are required to reset the password.
If you have no data on your drive that you want to keep, you can boot up from the OSX Snow Leopard disk and install OSX SL.
Insert the Snow Leopard DVD and hold the C key during startup. The Mac should boot from the CD/DVD drive into the installer.
Follow the prompts, erase the disk and install OSX Snow Leopard.

HT1338 i've been getting an error when trying to play online games saying that i need to have the browser in 32 - bit mode. my browser is in 32 - bit mode but the msg keeps coming up and not running the game

i've been getting an error when trying to play online games saying that i need to have the browser in 32 - bit mode. my browser is in 32 - bit mode but the msg keeps coming up and not running the game

I dunno, that doesn't make any sense to me.
I just shut down and rebooted into the SnowLeopard partition and took a peek at the preference panes. There are only 3 that run in 32 bit only. They are all 3rd party, and none of the prefpanes are non Intel. Like I said, I have never owned a PPC machine. Anyhow, SnowLeopard doesn't even have an iCloud prefpane, or a combined mail, contacts, and calenders prefpane, and the ML security and privacy prefpane is all new as well. The software update prefpane is Intel and 64 bit in both SnowLeopard and Lion.
As to the triple boot, unless I'm totally mistaken, what I have here is, in essence, 3 seperate descrete computers in one box. All using the same hardware. but one at a time. I wouldn't know how to get more than one running at the same time, without using a virtual machine, even if I wanted to. (Which I don't) I do sometimes transfer files from one to another using the shared folder, but other than that, they do not interact. How could ML system preferences be trying to launch prefpanes from a totally different machine?

Registration box keeps coming up

Similar Messages

Maybe you are looking for