"registration" component
need component which will allow entering details (name,
adress, email etc) + adding files to server.
and also will enable the server to confirm the registration.
thanks
you will need to use a server-side scripting language such as
PHP to accomplish these tasks - and a server DB that you set up.
There is some information on the subject
HERE
to get you started.
Similar Messages
-
Vendor Registration -- some queries
Hi,
We are using the vendor registration component ( ROS) and after the new registered vendors has become a business partner in SRM (EBP) ,
1. We want a process to capture the continuous update of vendor data. How this could be done in the SRM ( Either through
ROS/SUS/SRM?) ?. we need a 2 step work-flow, after the vendor has updated the data, to accept the changes done by the
vendor.
2. Also, we want to capture additional details like TAX ID and Bank details , only for the approved vendors and the vendors need to provide this data online ( changes to existing data) and this should go through a 2 step work flow for the changes to be approved.
Pl provide your inputs.
Thanks and Regards
veluHi,
Its not transacton code..
HRMD_ABA is the message type used to transfer HR master data ( organiztion,position, user ) from
backend R/3 system to SRM system.
Need to configure ALE/IDOC in the SRM system. Using PFAL Transaction can do the initial transfer of data.
Go through this link
http://help.sap.com/printdocu/core/print46b/en/data/en/pdf/CABFAALEHR/CABFAALEHR_ALE_VERT.pdf
Thanks
prasad.s -
Web Dynpro component activation failed
I tried to activate a web dynpro component and the activation failed. Have listed error messages from the request log and activation log. Do let me know what could be the issue. The application deployed successfully on my local J2EE.
Request log details are as follows:
===== Processing =====
BUILD DCs
"hubbell.com/appl/ptl.wd.regtool" in variant "default"
.. FAILURE: The build failed due to compilation errors. See build log for details. [result code: 202]
===== Processing ===== finished at 2005-11-29 00:09:48.813 GMT and took 18 s 899 ms
===== Post-Processing =====
Check whether build was successful for all required variants...
"hubbell.com/appl/ptl.wd.regtool" in variant "default" FAILED
===== Post-Processing ===== finished at 2005-11-29 00:09:48.823 GMT and took 3 ms
Change request state from PROCESSING to FAILED
ERROR! The following problem(s) occurred during request processing:
ERROR! The following error occurred during request processing:Activation FAILED due to build problems. See build logs for details.
Activation log details are as follows:
wdgen] [Info] Initialize generation templates from configuration jar:file:/usr/sap/EDP/JC00/j2ee/cluster/server0/temp/CBS/79/.B/3223/DCs/sap.com/tc/bi/wd/_comp/gen/default/public/def/lib/java/SapWebDynproGenerationCore.jar!/WebDynproGenerationConfigurationCompiled.xml
[wdgen] [Error] com.hubbell.ptl.rgstr.app.Registration -->
Application Registration: Component is missing
[wdgen] [Error] com.hubbell.ptl.rgstr.app.Registration -->
Application Registration: Startup plug is missing
[wdgen] [Error] Generation failed due to errors (0 seconds)
Build with ERRORS
file:/usr/sap/EDP/JC00/j2ee/cluster/server0/temp/CBS/79/.B/3223/DCs/hubbell.com/appl/ptl.wd.regtool/_comp/gen/default/logs/build.xml:49: [Error] Generation failed!There's obviously something missing in your WD DC: "Startup plug is missing". Your code has been checked-in to the inactive workspace. What you can do now is synchronize your DC with the server. You should get the same error then in your local NWDS and solve it.
-
E-mail supplier not trasfered from mm to sus via xi
Dear customizer,
we have a problem,i trasfer supplier via xi from mm to sus,i create the idoc Z_CREMAS_SUSMM as configuration guide suggest,but this idoc don't contain the supplier e-mail, so this isn't trasfered to sus.Because this e-mail is very important for notification i must solve this problem.I have a 4.6c R/3 and SRM 5.0
Thanks for your collaboration.Hello Alessio,
Is the problem you are facing that BP is not getting created in SRM?? If so then do the following:
<i>
<b>You need to configure the User Exit VSV00001 as per the configuration guide.
This will carry your vendor email address....</b></i>
Also ensure the following:
<i><b>add 'BBP_SUS_BP_REG_CREATION' as the docu object for the email and turn off the flag of 'use self registration component'</b>
</i>
Then hope the email stuff won't bother u...
Thanks,
Himadri -
E sourcing functionality questions for scoping
Hi All,
we are in scoping stage of an E sourcing project and want to use vendor registration component.
I have the following questions
1. Integration package (ES->R3 4.7 or ECC6) - does it support vendor modifications to be replicated OR custom solution required
2. Is it possible to download and upload vendors using spreadsheets?
3. As Directory configuration is per cluster, do we need to have multiple clusters to accommodate different group compaines (who have their own users /vendors)
4. Are scripts / page customisation / workflows etc specific to an enterprise context / cluster or for the whole server? If possible, then is it easy to replicate(transport) these developments in different enterprise contexts.
5. Does ES6 or ES7 facilitate transfer of attachments?
6. Is it possible to create vendors (Buy side) without contact persons
Any inputs will be really appreciated
Thanks
SubroteI'll respond to the questions I have experience with:
2. Is it possible to download and upload vendors using spreadsheets?
Yes. Import via Workbook (Excel) allows you to create Vendors. You can also export vendors using Export Data or reports.
3. As Directory configuration is per cluster, do we need to have multiple clusters to accommodate different group compaines (who have their own users /vendors)
That would depend on whether multiple LDAP directories are used and the level of data separation needed. You can have multiple Business Units within a company and multiple companies on the same context. Check out contexts in the install guide,
4. Are scripts / page customisation / workflows etc specific to an enterprise context / cluster or for the whole server? If possible, then is it easy to replicate(transport) these developments in different enterprise contexts.
They are specific to an Enterprise Context. However, you can export & import the modifications. Also, if you make configuration changes via workbook you can load those changes per context.
6. Is it possible to create vendors (Buy side) without contact persons
Yes. You can create vendors without contacts.
Hope that helps.
Cheers,
Greg -
Hi,
I have created new components - for "product catalog, registration, service contract.."in XCM .
But when i try to assign the components to the customer Application Configuration, Except JCO, remaining Customer components are not reflected,
To be more i am uanble to select the customer components.
Regards
yaswanth.kYes,
let me make you clear .
I have taken Standard application configuration- icss_standard,
With refernene to that i created zicss_standard.
Next i created following components
JCO component - zjco_224
Registration component as - zregistration
Service request component as - zservice request.
then i restarted Java.
After that When i tried to assign to these components , i am unable to see any custom components expect JCO component in ZICSS_STANDARD.
Is it the software problem or any configuratins we need to made as basis level. -
Create Relational View got error: ORA-19276: XPST0005 - XPath step specifie
Hi expert,
I am using Oracle 11.2.0.1.0 XML DB.
I am successfully registered schema and generated a table DOCUMENT.
I have succfully inserted 12 .xml files to this table.
SQL> SELECT OBJECT_VALUE FROM document;
OBJECT_VALUE
<?xml version="1.0" encoding="UTF-8"?><?xml-stylesheet href="http://www.accessdata.fda.gov/spl/stylesheet/spl.xsl" type="text/xsl"?>
<document xmlns="urn:hl7-org:v3" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="urn:hl7-org:v3 http://localhost:8080/home/DEV/xsd/spl.xsd">
<id root="03d6a2cd-fdda-4fe1-865d-da0db9212f34"/>
<code code="51725-0" codeSystem="2.16.840.1.113883.6.1" displayName="ESTABLISHMENT REGISTRATION"/>
</component>
</document>
then I tried to create a create Relational View base on one inserted .xml file I got error:
ERROR at line 3:
ORA-19276: XPST0005 - XPath step specifies an invalid element/attribute name: (document)
is there anyone know what was wrong?
Thanks a lot!
Cow
Edited by: Cow on Feb 15, 2011 8:58 PM
Edited by: Cow on Feb 21, 2011 6:59 AMThese kinds of issues, you will have to solve by joining multiple resultsets or passing fragments to the next XMLTABLE statement and building redundancy via the ORDINALITY clause (which results a NUMBER datatype)
For example
A "transaction" can have multiple "status"ses which can have multiple "reason"s
WITH XTABLE
AS
(SELECT xmltype('<TRANSACTION>
<PFL_ID>123456789</PFL_ID>
<PMI_ID>1</PMI_ID><PII_ID>1</PII_ID>
<ID>1</ID>
<INSTR_ID>MARCO_003</INSTR_ID>
<E_TO_E_ID>MARCO_004</E_TO_E_ID>
<INSTD_AMT>10</INSTD_AMT>
<INSTD_AMT_CCY>EUR</INSTD_AMT_CCY>
<STATUS>
<PFL_ID>123456789</PFL_ID>
<PMI_ID>1</PMI_ID><PII_ID>1</PII_ID>
<TXI_ID>1</TXI_ID>
<ID>1</ID>
<PMT_TX_STS_UTC_DT>2011-02-15</PMT_TX_STS_UTC_DT>
<REASON>
<ID>1000</ID>
<STS_RSN_PRTRY>MG001</STS_RSN_PRTRY>
</REASON>
<REASON>
<ID>2000</ID>
<STS_RSN_PRTRY>IS000</STS_RSN_PRTRY>
</REASON>
</STATUS>
</TRANSACTION>') as XMLCOLUMN
FROM DUAL
SELECT STS_ID as STATUS_ID,
STS_PFL_ID,
STS_PMI_ID,
STS_TXI_ID,
RSN_ID as REASON_ID,
RSN_STS_RSN_PRTRY,
RSN_XML_POS as POSITION
FROM XTABLE
, XMLTABLE ('/TRANSACTION/STATUS'
PASSING XMLCOLUMN
COLUMNS
STS_PFL_ID NUMBER(10) path 'PFL_ID'
, STS_PMI_ID NUMBER(10) path 'PMI_ID'
, STS_TXI_ID NUMBER(10) path 'TXI_ID'
, STS_ID VARCHAR2(10) path 'ID'
, XML_REASONS XMLTYPE path 'REASON'
) sts
, XMLTABLE ('/REASON'
PASSING sts.XML_REASONS
COLUMNS
RSN_XML_POS FOR ORDINALITY
, RSN_ID VARCHAR2(10) path 'ID'
, RSN_STS_RSN_PRTRY VARCHAR2(10) path 'STS_RSN_PRTRY'
) rsnWill give you the following output (in your case DON"T forget to buildin the namespace references)
SQL> WITH XTABLE
2 AS
3 (SELECT xmltype('<TRANSACTION>
4 <PFL_ID>123456789</PFL_ID>
5 <PMI_ID>1</PMI_ID><PII_ID>1</PII_ID>
6 <ID>1</ID>
7 <INSTR_ID>MARCO_003</INSTR_ID>
8 <E_TO_E_ID>MARCO_004</E_TO_E_ID>
9 <INSTD_AMT>10</INSTD_AMT>
10 <INSTD_AMT_CCY>EUR</INSTD_AMT_CCY>
11 <STATUS>
12 <PFL_ID>123456789</PFL_ID>
13 <PMI_ID>1</PMI_ID><PII_ID>1</PII_ID>
14 <TXI_ID>1</TXI_ID>
15 <ID>1</ID>
16 <PMT_TX_STS_UTC_DT>2011-02-15</PMT_TX_STS_UTC_DT>
17 <REASON>
18 <ID>1000</ID>
19 <STS_RSN_PRTRY>MG001</STS_RSN_PRTRY>
20 </REASON>
21 <REASON>
22 <ID>2000</ID>
23 <STS_RSN_PRTRY>IS000</STS_RSN_PRTRY>
24 </REASON>
25 </STATUS>
26 </TRANSACTION>') as XMLCOLUMN
27 FROM DUAL
28 )
29 SELECT STS_ID as STATUS_ID,
30 STS_PFL_ID,
31 STS_PMI_ID,
32 STS_TXI_ID,
33 RSN_ID as REASON_ID,
34 RSN_STS_RSN_PRTRY,
35 RSN_XML_POS as POSITION
36 FROM XTABLE
37 , XMLTABLE ('/TRANSACTION/STATUS'
38 PASSING XMLCOLUMN
39 COLUMNS
40 STS_PFL_ID NUMBER(10) path 'PFL_ID'
41 , STS_PMI_ID NUMBER(10) path 'PMI_ID'
42 , STS_TXI_ID NUMBER(10) path 'TXI_ID'
43 , STS_ID VARCHAR2(10) path 'ID'
44 , XML_REASONS XMLTYPE path 'REASON'
45 ) sts
46 , XMLTABLE ('/REASON'
47 PASSING sts.XML_REASONS
48 COLUMNS
49 RSN_XML_POS FOR ORDINALITY
50 , RSN_ID VARCHAR2(10) path 'ID'
51 , RSN_STS_RSN_PRTRY VARCHAR2(10) path 'STS_RSN_PRTRY'
52 ) rsn
53 ;
STATUS_ID STS_PFL_ID STS_PMI_ID STS_TXI_ID REASON_ID RSN_STS_RS POSITION
1 123456789 1 1 1000 MG001 1
1 123456789 1 1 2000 IS000 2
2 rows selected.If I wouldn't have done that then I would have got your result which fails with your error:
- ORA-19279 - XQuery dynamic type mismatch: expected singleton sequence - got multi-item sequence
SQL> WITH XTABLE
2 AS
3 (SELECT xmltype('<TRANSACTION>
4 <PFL_ID>123456789</PFL_ID>
5 <PMI_ID>1</PMI_ID><PII_ID>1</PII_ID>
6 <ID>1</ID>
7 <INSTR_ID>MARCO_003</INSTR_ID>
8 <E_TO_E_ID>MARCO_004</E_TO_E_ID>
9 <INSTD_AMT>10</INSTD_AMT>
10 <INSTD_AMT_CCY>EUR</INSTD_AMT_CCY>
11 <STATUS>
12 <PFL_ID>123456789</PFL_ID>
13 <PMI_ID>1</PMI_ID><PII_ID>1</PII_ID>
14 <TXI_ID>1</TXI_ID>
15 <ID>1</ID>
16 <PMT_TX_STS_UTC_DT>2011-02-15</PMT_TX_STS_UTC_DT>
17 <REASON>
18 <ID>1000</ID>
19 <STS_RSN_PRTRY>MG001</STS_RSN_PRTRY>
20 </REASON>
21 <REASON>
22 <ID>2000</ID>
23 <STS_RSN_PRTRY>IS000</STS_RSN_PRTRY>
24 </REASON>
25 </STATUS>
26 </TRANSACTION>') as XMLCOLUMN
27 FROM DUAL
28 )
29 SELECT STS_ID as STATUS_ID,
30 STS_PFL_ID,
31 STS_PMI_ID,
32 STS_TXI_ID,
33 RSN_ID as REASON_ID,
34 RSN_STS_RSN_PRTRY
35 FROM XTABLE
36 , XMLTABLE ('/TRANSACTION/STATUS'
37 PASSING XMLCOLUMN
38 COLUMNS
39 STS_PFL_ID NUMBER(10) path 'PFL_ID'
40 , STS_PMI_ID NUMBER(10) path 'PMI_ID'
41 , STS_TXI_ID NUMBER(10) path 'TXI_ID'
42 , STS_ID VARCHAR2(10) path 'ID'
43 , RSN_ID VARCHAR2(10) path 'REASON/ID'
44 , RSN_STS_RSN_PRTRY VARCHAR2(10) path 'REASON/STS_RSN_PRTRY'
45 ) rsn;
</REASON>
ERROR at line 24:
ORA-19279: XQuery dynamic type mismatch: expected singleton sequence - got
multi-item sequenceHTH
Edited by: Marco Gralike on Feb 16, 2011 12:12 PM -
Hey guys,
I have 3 files: main.mxml, registration.mxml, and
update.mxml. The registration is a custom canvas component with a
datagrid, and the update is a popup activated by clicking the
datagrid. I understand how to dispatch custom events, but I'm
having trouble dispatching from popup back to main.mxml where my
remote code is located. I can successfully dispatch objects with a
custom event from reg component to main. What am I doing wrong?
Should I just add a remote command in the registration component
and run a function in the registration? Doesn't seem like loose
coupling to me?If your registration component is instantiated in main and
you dispatch an event that bubbles from registration to main, then
bubbling works. But forget about bubbling when dispatching an event
from a popup to any other component. You can do the following:
If you use a model (with Cairngorm, PureMVC ... or simply
Singleton), you can have an object in your model that extends
EventDispatcher and serves as a message target.
package com.mycompany.core.model
import flash.events.EventDispatcher;
// This class only serves as the target for messages that
concern objects that are not
// in the display list or that are in the display list but
cannot be reached by event bubbling
public class MessageTarget extends EventDispatcher
public function MessageTarget()
In your model:
// Message target
public var messageTarget:MessageTarget = new
MessageTarget();
In any component interested in some messages (e.g column
visibility) dispatched on the message target :
// Add event listener for column visibility change
this.model.messageTarget.addEventListener(ColumnVisibilityChangedEvent.COLUMN_VISIBILITY_ CHANGED,
this.onColumnVisibilityChanged);
Then, you can dispatch an event from anywhere that can be
listened to anywhere:
// Send Column Visibility Changed event
this.model.messageTarget.dispatchEvent(
new
ColumnVisibilityChangedEvent(ColumnVisibilityChangedEvent.COLUMN_VISIBILITY_CHANGED,
false, false)); -
Hey guys,
I have 3 files: main.mxml, registration.mxml, and
update.mxml. The registration is a custom canvas component with a
datagrid, and the update is a popup activated by clicking the
datagrid. I understand how to dispatch custom events, but I'm
having trouble dispatching from popup back to main.mxml where my
remote code is located. I can successfully dispatch objects with a
custom event from reg component to main. What am I doing wrong?
Should I just add a remote command in the registration component
and run a function in the registration? Doesn't seem like loose
coupling to me?If your registration component is instantiated in main and
you dispatch an event that bubbles from registration to main, then
bubbling works. But forget about bubbling when dispatching an event
from a popup to any other component. You can do the following:
If you use a model (with Cairngorm, PureMVC ... or simply
Singleton), you can have an object in your model that extends
EventDispatcher and serves as a message target.
package com.mycompany.core.model
import flash.events.EventDispatcher;
// This class only serves as the target for messages that
concern objects that are not
// in the display list or that are in the display list but
cannot be reached by event bubbling
public class MessageTarget extends EventDispatcher
public function MessageTarget()
In your model:
// Message target
public var messageTarget:MessageTarget = new
MessageTarget();
In any component interested in some messages (e.g column
visibility) dispatched on the message target :
// Add event listener for column visibility change
this.model.messageTarget.addEventListener(ColumnVisibilityChangedEvent.COLUMN_VISIBILITY_ CHANGED,
this.onColumnVisibilityChanged);
Then, you can dispatch an event from anywhere that can be
listened to anywhere:
// Send Column Visibility Changed event
this.model.messageTarget.dispatchEvent(
new
ColumnVisibilityChangedEvent(ColumnVisibilityChangedEvent.COLUMN_VISIBILITY_CHANGED,
false, false)); -
Install stops at updating component registration
Hi
I am trying to install itunes on a new Windows XP Pro machine. It gets to the updating component registration and seems to just stop. I have left now for a few hours and it has only advanced by one bar. At this rate it will take a week to install. Anybody got any helpful ideas?I have no answer but can report a near identical problem on 64 bit Oracle flavor of Linux.
Configuring OCM
Error encountered in deploying OCM instance. Exit code = 1
Step Configuring OCM failed
COnfiguration Action 'Configuring OCM' has failed. Please check log for details.
Step Configuring OCM failed -
Windows Script Component Registration Generate 0x80004005 Error Code
Scenario :
I create a simple .hta for managing students information and personal data. I create an application registration system which is required by the user to register the .hta before using it (Freeware which required registration for software benchmarking purpose).
The registration is created with .wsc file structure. All students registration can work properly and saved into the database without generating any error. However the .wsc file for application registration is unable to register it which generate error.
Problems :
.wsc file generated error 0x80004005 on registration.
Flow :
If I try to register from the context menu, the following error is generated.
"The module "C:\Windows\system32\scrobj.dll" was loaded but the call to DllInstall failed with error code 0x80004005."
If I try to register from the command line, the following error is generated.
"The module "C:\Windows\system32\scrobj.dll" was loaded but the call to DllRegisterServerEx failed with error code 0x80004005."
Trial Made :
I searched the solution over the internet and nothing was found except all the solution related to 0x80004005 is pointed to Jet.OleDb problems.
Request :
I hope someone can help me solving this problem. So any help or opinion will be appreciated.
Remarks :
Microsoft Windows 7 Ultimate 32 bit on 32 bit system architecture.
Internet Information Services 7.5 is not installed.
Microsoft .NET Framework 1.1, 2.0, 3.0, 3.5 and 4.0 Redistributable installed.
Microsoft Office Access 2007 with Microsoft Jet OleDb 4.0 installed.
Thanks.Using Windows 7 Home Premium
I have read this thread carefully and followed the recommendations, and I still get the MsgBox error:
The module "scrobj.dll" was loaded but the call to DllInstall failed with error code 0x80004005
For more information about this problem, search online using the error code as a search term.
I even took these additional steps in the command prompt:
>cd C:\Windows\System32
>regsvr32 /i:C:\Users\dn\dn.wsc scrobj.dll
>cd C:\Windows\SysWOW64
>regsvr32 /i:C:\Users\dn\dn.wsc scrobj.dll
I executed the identical command after changing to each of the directories. Each time I received the same error
Yes - that is what happens when you "necro" half century old threads.
The object I obsolete and unsupported. The error - 0x80004005 indicates that you are not an admin. It may also indicate that you are using an unsupported module.
¯\_(ツ)_/¯ -
Registration package with component into the application
i have a package FORM_XXX into de scott schema and i need registration this form FORM into the application. Do You Know this operation???
Hi,
What do you want the package to do ??
Incase you want to create a FORM based on a procedure then you could go to the Applications Tab and select that option and base it on a procedure that you created .
Thanks,
Anu -
we have try to uninstall client and remove the ccm namespace from wmi, and reisntall MP, no luck
below log from mpmsi.log.lasterror
=== Verbose logging started: 8/27/2014 20:50:23 Build type: SHIP UNICODE 5.00.9600.00 Calling process: H:\Program Files\Microsoft Configuration Manager\bin\x64\rolesetup.exe ===
MSI (c) (9C:58) [20:50:23:592]: Resetting cached policy values
MSI (c) (9C:58) [20:50:23:592]: Machine policy value 'Debug' is 0
MSI (c) (9C:58) [20:50:23:592]: ******* RunEngine:
******* Product: h:\Program Files\Microsoft Configuration Manager\bin\x64\mp.msi
******* Action:
******* CommandLine: **********
MSI (c) (9C:58) [20:50:23:592]: Client-side and UI is none or basic: Running entire install on the server.
MSI (c) (9C:58) [20:50:23:592]: Grabbed execution mutex.
MSI (c) (9C:58) [20:50:23:594]: Cloaking enabled.
MSI (c) (9C:58) [20:50:23:594]: Attempting to enable all disabled privileges before calling Install on Server
MSI (c) (9C:58) [20:50:23:594]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (24:FC) [20:50:23:598]: Running installation inside multi-package transaction h:\Program Files\Microsoft Configuration Manager\bin\x64\mp.msi
MSI (s) (24:FC) [20:50:23:598]: Grabbed execution mutex.
MSI (s) (24:48) [20:50:23:599]: Resetting cached policy values
MSI (s) (24:48) [20:50:23:599]: Machine policy value 'Debug' is 0
MSI (s) (24:48) [20:50:23:599]: ******* RunEngine:
******* Product: h:\Program Files\Microsoft Configuration Manager\bin\x64\mp.msi
******* Action:
******* CommandLine: **********
MSI (s) (24:48) [20:50:23:599]: Machine policy value 'DisableUserInstalls' is 0
MSI (s) (24:48) [20:50:23:603]: Note: 1: 2203 2: C:\Windows\Installer\inprogressinstallinfo.ipi 3: -2147287038
MSI (s) (24:48) [20:50:23:605]: SRSetRestorePoint skipped for this transaction.
MSI (s) (24:48) [20:50:23:606]: Note: 1: 1402 2: HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer 3: 2
MSI (s) (24:48) [20:50:23:607]: File will have security applied from OpCode.
MSI (s) (24:48) [20:50:23:619]: SOFTWARE RESTRICTION POLICY: Verifying package --> 'h:\Program Files\Microsoft Configuration Manager\bin\x64\mp.msi' against software restriction policy
MSI (s) (24:48) [20:50:23:619]: SOFTWARE RESTRICTION POLICY: h:\Program Files\Microsoft Configuration Manager\bin\x64\mp.msi has a digital signature
MSI (s) (24:48) [20:50:23:619]: SOFTWARE RESTRICTION POLICY: h:\Program Files\Microsoft Configuration Manager\bin\x64\mp.msi is permitted to run because the user token authorizes execution (system or service token).
MSI (s) (24:48) [20:50:23:619]: MSCOREE not loaded loading copy from system32
MSI (s) (24:48) [20:50:23:621]: End dialog not enabled
MSI (s) (24:48) [20:50:23:621]: Original package ==> h:\Program Files\Microsoft Configuration Manager\bin\x64\mp.msi
MSI (s) (24:48) [20:50:23:621]: Package we're running from ==> C:\Windows\Installer\6257f6f.msi
MSI (s) (24:48) [20:50:23:624]: APPCOMPAT: Compatibility mode property overrides found.
MSI (s) (24:48) [20:50:23:624]: APPCOMPAT: looking for appcompat database entry with ProductCode '{6CED3AB0-05AF-4C81-8DBE-A62661C26F40}'.
MSI (s) (24:48) [20:50:23:624]: APPCOMPAT: no matching ProductCode found in database.
MSI (s) (24:48) [20:50:23:626]: Machine policy value 'TransformsSecure' is 1
MSI (s) (24:48) [20:50:23:627]: Note: 1: 2262 2: MsiFileHash 3: -2147287038
MSI (s) (24:48) [20:50:23:627]: Machine policy value 'DisablePatch' is 0
MSI (s) (24:48) [20:50:23:627]: Machine policy value 'AllowLockdownPatch' is 0
MSI (s) (24:48) [20:50:23:627]: Machine policy value 'DisableLUAPatching' is 0
MSI (s) (24:48) [20:50:23:627]: Machine policy value 'DisableFlyWeightPatching' is 0
MSI (s) (24:48) [20:50:23:627]: APPCOMPAT: looking for appcompat database entry with ProductCode '{6CED3AB0-05AF-4C81-8DBE-A62661C26F40}'.
MSI (s) (24:48) [20:50:23:627]: APPCOMPAT: no matching ProductCode found in database.
MSI (s) (24:48) [20:50:23:627]: Transforms are not secure.
MSI (s) (24:48) [20:50:23:628]: PROPERTY CHANGE: Adding MsiLogFileLocation property. Its value is 'h:\Program Files\Microsoft Configuration Manager\logs\mpMSI.log'.
MSI (s) (24:48) [20:50:23:628]: Command Line: CCMINSTALLDIR=h:\Program Files\SMS_CCM CCMSERVERDATAROOT=h:\Program Files\Microsoft Configuration Manager USESMSPORTS=TRUE SMSPORTS=80 USESMSSSLPORTS=TRUE SMSSSLPORTS=443 USESMSSSL=TRUE SMSSSLSTATE=0 CCMENABLELOGGING=TRUE
CCMLOGLEVEL=1 CCMLOGMAXSIZE=1000000 CCMLOGMAXHISTORY=1 CURRENTDIRECTORY=H:\Program Files\Microsoft Configuration Manager\bin\x64 CLIENTUILEVEL=3 MSICLIENTUSESEXTERNALUI=1 CLIENTPROCESSID=6556
MSI (s) (24:48) [20:50:23:628]: Product Code passed to Engine.Initialize: ''
MSI (s) (24:48) [20:50:23:628]: Product Code from property table before transforms: '{6CED3AB0-05AF-4C81-8DBE-A62661C26F40}'
MSI (s) (24:48) [20:50:23:628]: Product Code from property table after transforms: '{6CED3AB0-05AF-4C81-8DBE-A62661C26F40}'
MSI (s) (24:48) [20:50:23:628]: Product not registered: beginning first-time install
MSI (s) (24:48) [20:50:23:630]: Machine policy value 'DisableMsi' is 1
MSI (s) (24:48) [20:50:23:630]: Product {6CED3AB0-05AF-4C81-8DBE-A62661C26F40} is not managed.
MSI (s) (24:48) [20:50:23:630]: MSI_LUA: Credential prompt not required, user is an admin
MSI (s) (24:48) [20:50:23:630]: PROPERTY CHANGE: Adding ProductState property. Its value is '-1'.
MSI (s) (24:48) [20:50:23:630]: Entering CMsiConfigurationManager::SetLastUsedSource.
MSI (s) (24:48) [20:50:23:630]: User policy value 'SearchOrder' is 'nmu'
MSI (s) (24:48) [20:50:23:630]: Adding new sources is allowed.
MSI (s) (24:48) [20:50:23:630]: PROPERTY CHANGE: Adding PackagecodeChanging property. Its value is '1'.
MSI (s) (24:48) [20:50:23:630]: Package name extracted from package path: 'mp.msi'
MSI (s) (24:48) [20:50:23:630]: Package to be registered: 'mp.msi'
MSI (s) (24:48) [20:50:23:631]: Note: 1: 2262 2: AdminProperties 3: -2147287038
MSI (s) (24:48) [20:50:23:631]: Machine policy value 'AlwaysInstallElevated' is 0
MSI (s) (24:48) [20:50:23:631]: User policy value 'AlwaysInstallElevated' is 0
MSI (s) (24:48) [20:50:23:631]: Product installation will be elevated because user is admin and product is being installed per-machine.
MSI (s) (24:48) [20:50:23:631]: Running product '{6CED3AB0-05AF-4C81-8DBE-A62661C26F40}' with elevated privileges: Product is assigned.
MSI (s) (24:48) [20:50:23:631]: PROPERTY CHANGE: Adding CCMINSTALLDIR property. Its value is 'h:\Program Files\SMS_CCM'.
MSI (s) (24:48) [20:50:23:631]: PROPERTY CHANGE: Adding CCMSERVERDATAROOT property. Its value is 'h:\Program Files\Microsoft Configuration Manager'.
MSI (s) (24:48) [20:50:23:631]: PROPERTY CHANGE: Adding USESMSPORTS property. Its value is 'TRUE'.
MSI (s) (24:48) [20:50:23:631]: PROPERTY CHANGE: Adding SMSPORTS property. Its value is '80'.
MSI (s) (24:48) [20:50:23:631]: PROPERTY CHANGE: Adding USESMSSSLPORTS property. Its value is 'TRUE'.
MSI (s) (24:48) [20:50:23:631]: PROPERTY CHANGE: Adding SMSSSLPORTS property. Its value is '443'.
MSI (s) (24:48) [20:50:23:631]: PROPERTY CHANGE: Adding USESMSSSL property. Its value is 'TRUE'.
MSI (s) (24:48) [20:50:23:631]: PROPERTY CHANGE: Adding SMSSSLSTATE property. Its value is '0'.
MSI (s) (24:48) [20:50:23:631]: PROPERTY CHANGE: Adding CCMENABLELOGGING property. Its value is 'TRUE'.
MSI (s) (24:48) [20:50:23:631]: PROPERTY CHANGE: Adding CCMLOGLEVEL property. Its value is '1'.
MSI (s) (24:48) [20:50:23:631]: PROPERTY CHANGE: Adding CCMLOGMAXSIZE property. Its value is '1000000'.
MSI (s) (24:48) [20:50:23:631]: PROPERTY CHANGE: Adding CCMLOGMAXHISTORY property. Its value is '1'.
MSI (s) (24:48) [20:50:23:631]: PROPERTY CHANGE: Adding CURRENTDIRECTORY property. Its value is 'H:\Program Files\Microsoft Configuration Manager\bin\x64'.
MSI (s) (24:48) [20:50:23:631]: PROPERTY CHANGE: Adding CLIENTUILEVEL property. Its value is '3'.
MSI (s) (24:48) [20:50:23:631]: PROPERTY CHANGE: Adding MSICLIENTUSESEXTERNALUI property. Its value is '1'.
MSI (s) (24:48) [20:50:23:631]: PROPERTY CHANGE: Adding CLIENTPROCESSID property. Its value is '6556'.
MSI (s) (24:48) [20:50:23:631]: Machine policy value 'DisableAutomaticApplicationShutdown' is 0
MSI (s) (24:48) [20:50:23:632]: PROPERTY CHANGE: Adding MsiRestartManagerSessionKey property. Its value is 'd8d0cefc1249514889002637bb750a41'.
MSI (s) (24:48) [20:50:23:632]: RESTART MANAGER: Session opened.
MSI (s) (24:48) [20:50:23:632]: PROPERTY CHANGE: Adding MsiSystemRebootPending property. Its value is '1'.
MSI (s) (24:48) [20:50:23:632]: TRANSFORMS property is now:
MSI (s) (24:48) [20:50:23:632]: PROPERTY CHANGE: Adding VersionDatabase property. Its value is '200'.
MSI (s) (24:48) [20:50:23:633]: SHELL32::SHGetFolderPath returned: C:\Windows\system32\config\systemprofile\AppData\Roaming
MSI (s) (24:48) [20:50:23:634]: SHELL32::SHGetFolderPath returned: C:\Windows\system32\config\systemprofile\Favorites
MSI (s) (24:48) [20:50:23:634]: SHELL32::SHGetFolderPath returned: C:\Windows\system32\config\systemprofile\AppData\Roaming\Microsoft\Windows\Network Shortcuts
MSI (s) (24:48) [20:50:23:635]: SHELL32::SHGetFolderPath returned: C:\Windows\system32\config\systemprofile\Documents
MSI (s) (24:48) [20:50:23:635]: SHELL32::SHGetFolderPath returned: C:\Windows\system32\config\systemprofile\AppData\Roaming\Microsoft\Windows\Printer Shortcuts
MSI (s) (24:48) [20:50:23:636]: SHELL32::SHGetFolderPath returned: C:\Windows\system32\config\systemprofile\AppData\Roaming\Microsoft\Windows\Recent
MSI (s) (24:48) [20:50:23:636]: SHELL32::SHGetFolderPath returned: C:\Windows\system32\config\systemprofile\AppData\Roaming\Microsoft\Windows\SendTo
MSI (s) (24:48) [20:50:23:637]: SHELL32::SHGetFolderPath returned: C:\Windows\system32\config\systemprofile\AppData\Roaming\Microsoft\Windows\Templates
MSI (s) (24:48) [20:50:23:637]: SHELL32::SHGetFolderPath returned: C:\ProgramData
MSI (s) (24:48) [20:50:23:638]: SHELL32::SHGetFolderPath returned: C:\Windows\system32\config\systemprofile\AppData\Local
MSI (s) (24:48) [20:50:23:638]: SHELL32::SHGetFolderPath returned: C:\Windows\system32\config\systemprofile\Pictures
MSI (s) (24:48) [20:50:23:639]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Administrative Tools
MSI (s) (24:48) [20:50:23:640]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup
MSI (s) (24:48) [20:50:23:640]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu\Programs
MSI (s) (24:48) [20:50:23:641]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu
MSI (s) (24:48) [20:50:23:641]: SHELL32::SHGetFolderPath returned: C:\Users\Public\Desktop
MSI (s) (24:48) [20:50:23:642]: SHELL32::SHGetFolderPath returned: C:\Windows\system32\config\systemprofile\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Administrative Tools
MSI (s) (24:48) [20:50:23:643]: SHELL32::SHGetFolderPath returned: C:\Windows\system32\config\systemprofile\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Startup
MSI (s) (24:48) [20:50:23:643]: SHELL32::SHGetFolderPath returned: C:\Windows\system32\config\systemprofile\AppData\Roaming\Microsoft\Windows\Start Menu\Programs
MSI (s) (24:48) [20:50:23:644]: SHELL32::SHGetFolderPath returned: C:\Windows\system32\config\systemprofile\AppData\Roaming\Microsoft\Windows\Start Menu
MSI (s) (24:48) [20:50:23:644]: SHELL32::SHGetFolderPath returned: C:\Windows\system32\config\systemprofile\Desktop
MSI (s) (24:48) [20:50:23:645]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Templates
MSI (s) (24:48) [20:50:23:645]: SHELL32::SHGetFolderPath returned: C:\Windows\Fonts
MSI (s) (24:48) [20:50:23:645]: Note: 1: 2898 2: MS Sans Serif 3: MS Sans Serif 4: 0 5: 16
MSI (s) (24:48) [20:50:23:648]: MSI_LUA: Setting MsiRunningElevated property to 1 because the install is already running elevated.
MSI (s) (24:48) [20:50:23:648]: PROPERTY CHANGE: Adding MsiRunningElevated property. Its value is '1'.
MSI (s) (24:48) [20:50:23:648]: PROPERTY CHANGE: Adding Privileged property. Its value is '1'.
MSI (s) (24:48) [20:50:23:648]: Note: 1: 1402 2: HKEY_CURRENT_USER\Software\Microsoft\MS Setup (ACME)\User Info 3: 2
MSI (s) (24:48) [20:50:23:648]: Note: 1: 1402 2: HKEY_CURRENT_USER\Software\Microsoft\MS Setup (ACME)\User Info 3: 2
MSI (s) (24:48) [20:50:23:648]: PROPERTY CHANGE: Adding DATABASE property. Its value is 'C:\Windows\Installer\6257f6f.msi'.
MSI (s) (24:48) [20:50:23:648]: PROPERTY CHANGE: Adding OriginalDatabase property. Its value is 'h:\Program Files\Microsoft Configuration Manager\bin\x64\mp.msi'.
MSI (s) (24:48) [20:50:23:648]: Machine policy value 'MsiDisableEmbeddedUI' is 0
MSI (s) (24:48) [20:50:23:648]: EEUI - Disabling MsiEmbeddedUI due to existing external or embedded UI
MSI (s) (24:48) [20:50:23:648]: EEUI - Disabling MsiEmbeddedUI for service because it's not a quiet/basic install
MSI (s) (24:48) [20:50:23:648]: Note: 1: 2205 2: 3: PatchPackage
MSI (s) (24:48) [20:50:23:648]: Machine policy value 'DisableRollback' is 0
MSI (s) (24:48) [20:50:23:648]: User policy value 'DisableRollback' is 0
MSI (s) (24:48) [20:50:23:648]: PROPERTY CHANGE: Adding UILevel property. Its value is '2'.
=== Logging started: 8/27/2014 20:50:23 ===
MSI (s) (24:48) [20:50:23:649]: Note: 1: 2203 2: C:\Windows\Installer\inprogressinstallinfo.ipi 3: -2147287038
MSI (s) (24:48) [20:50:23:649]: APPCOMPAT: [DetectVersionLaunchCondition] Launch condition already passes.
MSI (s) (24:48) [20:50:23:649]: PROPERTY CHANGE: Adding ACTION property. Its value is 'INSTALL'.
MSI (s) (24:48) [20:50:23:649]: Doing action: INSTALL
Action start 20:50:23: INSTALL.
MSI (s) (24:48) [20:50:23:650]: Running ExecuteSequence
MSI (s) (24:48) [20:50:23:650]: Doing action: System64Folder.12C909B6_5F69_4C4D_8EC3_C225C1607933
MSI (s) (24:48) [20:50:23:650]: Note: 1: 2235 2: 3: ExtendedType 4: SELECT `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM `CustomAction` WHERE `Action` = 'System64Folder.12C909B6_5F69_4C4D_8EC3_C225C1607933'
MSI (s) (24:48) [20:50:23:650]: PROPERTY CHANGE: Adding System64Folder.12C909B6_5F69_4C4D_8EC3_C225C1607933 property. Its value is 'C:\Windows\system32\'.
Action start 20:50:23: System64Folder.12C909B6_5F69_4C4D_8EC3_C225C1607933.
MSI (s) (24:48) [20:50:23:651]: Doing action: SystemFolder.12C909B6_5F69_4C4D_8EC3_C225C1607933
Action ended 20:50:23: System64Folder.12C909B6_5F69_4C4D_8EC3_C225C1607933. Return value 1.
MSI (s) (24:48) [20:50:23:651]: Note: 1: 2235 2: 3: ExtendedType 4: SELECT `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM `CustomAction` WHERE `Action` = 'SystemFolder.12C909B6_5F69_4C4D_8EC3_C225C1607933'
MSI (s) (24:48) [20:50:23:651]: PROPERTY CHANGE: Adding SystemFolder.12C909B6_5F69_4C4D_8EC3_C225C1607933 property. Its value is 'C:\Windows\SysWOW64\'.
Action start 20:50:23: SystemFolder.12C909B6_5F69_4C4D_8EC3_C225C1607933.
MSI (s) (24:48) [20:50:23:651]: Doing action: SystemFolder.A6940213_CD40_4753_8BA2_E803376DECC3
Action ended 20:50:23: SystemFolder.12C909B6_5F69_4C4D_8EC3_C225C1607933. Return value 1.
MSI (s) (24:48) [20:50:23:652]: Note: 1: 2235 2: 3: ExtendedType 4: SELECT `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM `CustomAction` WHERE `Action` = 'SystemFolder.A6940213_CD40_4753_8BA2_E803376DECC3'
MSI (s) (24:48) [20:50:23:652]: PROPERTY CHANGE: Adding SystemFolder.A6940213_CD40_4753_8BA2_E803376DECC3 property. Its value is 'C:\Windows\SysWOW64\'.
Action start 20:50:23: SystemFolder.A6940213_CD40_4753_8BA2_E803376DECC3.
MSI (s) (24:48) [20:50:23:652]: Doing action: System64Folder.A6940213_CD40_4753_8BA2_E803376DECC3
Action ended 20:50:23: SystemFolder.A6940213_CD40_4753_8BA2_E803376DECC3. Return value 1.
MSI (s) (24:48) [20:50:23:652]: Note: 1: 2235 2: 3: ExtendedType 4: SELECT `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM `CustomAction` WHERE `Action` = 'System64Folder.A6940213_CD40_4753_8BA2_E803376DECC3'
MSI (s) (24:48) [20:50:23:652]: PROPERTY CHANGE: Adding System64Folder.A6940213_CD40_4753_8BA2_E803376DECC3 property. Its value is 'C:\Windows\system32\'.
Action start 20:50:23: System64Folder.A6940213_CD40_4753_8BA2_E803376DECC3.
MSI (s) (24:48) [20:50:23:653]: Doing action: SystemFolder.F65FD590_5BEA_48BE_8408_26F7244E8B61
Action ended 20:50:23: System64Folder.A6940213_CD40_4753_8BA2_E803376DECC3. Return value 1.
MSI (s) (24:48) [20:50:23:653]: Note: 1: 2235 2: 3: ExtendedType 4: SELECT `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM `CustomAction` WHERE `Action` = 'SystemFolder.F65FD590_5BEA_48BE_8408_26F7244E8B61'
MSI (s) (24:48) [20:50:23:653]: PROPERTY CHANGE: Adding SystemFolder.F65FD590_5BEA_48BE_8408_26F7244E8B61 property. Its value is 'C:\Windows\SysWOW64\'.
Action start 20:50:23: SystemFolder.F65FD590_5BEA_48BE_8408_26F7244E8B61.
MSI (s) (24:48) [20:50:23:653]: Doing action: System64Folder.F65FD590_5BEA_48BE_8408_26F7244E8B61
Action ended 20:50:23: SystemFolder.F65FD590_5BEA_48BE_8408_26F7244E8B61. Return value 1.
MSI (s) (24:48) [20:50:23:654]: Note: 1: 2235 2: 3: ExtendedType 4: SELECT `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM `CustomAction` WHERE `Action` = 'System64Folder.F65FD590_5BEA_48BE_8408_26F7244E8B61'
MSI (s) (24:48) [20:50:23:654]: PROPERTY CHANGE: Adding System64Folder.F65FD590_5BEA_48BE_8408_26F7244E8B61 property. Its value is 'C:\Windows\system32\'.
Action start 20:50:23: System64Folder.F65FD590_5BEA_48BE_8408_26F7244E8B61.
MSI (s) (24:48) [20:50:23:654]: Doing action: SystemFolder.BFC13682_FB8F_4455_9724_4DDBBBF713D7
Action ended 20:50:23: System64Folder.F65FD590_5BEA_48BE_8408_26F7244E8B61. Return value 1.
MSI (s) (24:48) [20:50:23:654]: Note: 1: 2235 2: 3: ExtendedType 4: SELECT `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM `CustomAction` WHERE `Action` = 'SystemFolder.BFC13682_FB8F_4455_9724_4DDBBBF713D7'
MSI (s) (24:48) [20:50:23:654]: PROPERTY CHANGE: Adding SystemFolder.BFC13682_FB8F_4455_9724_4DDBBBF713D7 property. Its value is 'C:\Windows\SysWOW64\'.
Action start 20:50:23: SystemFolder.BFC13682_FB8F_4455_9724_4DDBBBF713D7.
MSI (s) (24:48) [20:50:23:655]: Doing action: System64Folder.BFC13682_FB8F_4455_9724_4DDBBBF713D7
Action ended 20:50:23: SystemFolder.BFC13682_FB8F_4455_9724_4DDBBBF713D7. Return value 1.
MSI (s) (24:48) [20:50:23:655]: Note: 1: 2235 2: 3: ExtendedType 4: SELECT `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM `CustomAction` WHERE `Action` = 'System64Folder.BFC13682_FB8F_4455_9724_4DDBBBF713D7'
MSI (s) (24:48) [20:50:23:655]: PROPERTY CHANGE: Adding System64Folder.BFC13682_FB8F_4455_9724_4DDBBBF713D7 property. Its value is 'C:\Windows\system32\'.
Action start 20:50:23: System64Folder.BFC13682_FB8F_4455_9724_4DDBBBF713D7.
MSI (s) (24:48) [20:50:23:655]: Doing action: SystemFolder.1114972D_590D_4AB6_BA2E_779928CEDCC2
Action ended 20:50:23: System64Folder.BFC13682_FB8F_4455_9724_4DDBBBF713D7. Return value 1.
MSI (s) (24:48) [20:50:23:656]: Note: 1: 2235 2: 3: ExtendedType 4: SELECT `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM `CustomAction` WHERE `Action` = 'SystemFolder.1114972D_590D_4AB6_BA2E_779928CEDCC2'
MSI (s) (24:48) [20:50:23:656]: PROPERTY CHANGE: Adding SystemFolder.1114972D_590D_4AB6_BA2E_779928CEDCC2 property. Its value is 'C:\Windows\SysWOW64\'.
Action start 20:50:23: SystemFolder.1114972D_590D_4AB6_BA2E_779928CEDCC2.
MSI (s) (24:48) [20:50:23:656]: Doing action: System64Folder.1114972D_590D_4AB6_BA2E_779928CEDCC2
Action ended 20:50:23: SystemFolder.1114972D_590D_4AB6_BA2E_779928CEDCC2. Return value 1.
MSI (s) (24:48) [20:50:23:656]: Note: 1: 2235 2: 3: ExtendedType 4: SELECT `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM `CustomAction` WHERE `Action` = 'System64Folder.1114972D_590D_4AB6_BA2E_779928CEDCC2'
MSI (s) (24:48) [20:50:23:656]: PROPERTY CHANGE: Adding System64Folder.1114972D_590D_4AB6_BA2E_779928CEDCC2 property. Its value is 'C:\Windows\system32\'.
Action start 20:50:23: System64Folder.1114972D_590D_4AB6_BA2E_779928CEDCC2.
MSI (s) (24:48) [20:50:23:657]: Doing action: LaunchConditions
Action ended 20:50:23: System64Folder.1114972D_590D_4AB6_BA2E_779928CEDCC2. Return value 1.
Action start 20:50:23: LaunchConditions.
MSI (s) (24:48) [20:50:23:657]: Skipping action: CcmSwitchToRepairMode (condition is false)
MSI (s) (24:48) [20:50:23:657]: Doing action: AppSearch
Action ended 20:50:23: LaunchConditions. Return value 1.
Action start 20:50:23: AppSearch.
MSI (s) (24:48) [20:50:23:658]: Note: 1: 2262 2: Signature 3: -2147287038
MSI (s) (24:48) [20:50:23:658]: Note: 1: 2262 2: Signature 3: -2147287038
MSI (s) (24:48) [20:50:23:659]: PROPERTY CHANGE: Modifying CCMINSTALLDIR property. Its current value is 'h:\Program Files\SMS_CCM'. Its new value: 'C:\Windows\CCM\'.
MSI (s) (24:48) [20:50:23:659]: Note: 1: 2262 2: Signature 3: -2147287038
MSI (s) (24:48) [20:50:23:659]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE32\SOFTWARE\Microsoft\CCM\Embedded 3: 2
MSI (s) (24:48) [20:50:23:659]: Note: 1: 2262 2: Signature 3: -2147287038
MSI (s) (24:48) [20:50:23:659]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE32\Software\Microsoft\CCM\Logging\DebugLogging 3: 2
MSI (s) (24:48) [20:50:23:660]: Note: 1: 2262 2: Signature 3: -2147287038
MSI (s) (24:48) [20:50:23:660]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE32\SOFTWARE\Microsoft\SMS\IIS 3: 2
MSI (s) (24:48) [20:50:23:660]: Note: 1: 2262 2: Signature 3: -2147287038
MSI (s) (24:48) [20:50:23:660]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE32\SOFTWARE\Microsoft\SMS\MP 3: 2
MSI (s) (24:48) [20:50:23:660]: Note: 1: 2262 2: Signature 3: -2147287038
MSI (s) (24:48) [20:50:23:660]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE32\SOFTWARE\Microsoft\SMS\MP 3: 2
MSI (s) (24:48) [20:50:23:660]: Note: 1: 2262 2: Signature 3: -2147287038
MSI (s) (24:48) [20:50:23:661]: Skipping action: CcmAbortIfEmbeddedExists (condition is false)
MSI (s) (24:48) [20:50:23:661]: Doing action: CCPSearch
Action ended 20:50:23: AppSearch. Return value 1.
MSI (s) (24:48) [20:50:23:661]: Note: 1: 2205 2: 3: CCPSearch
MSI (s) (24:48) [20:50:23:661]: Note: 1: 2228 2: 3: CCPSearch 4: SELECT `Signature_` FROM `CCPSearch`
Action start 20:50:23: CCPSearch.
MSI (s) (24:48) [20:50:23:661]: Doing action: RMCCPSearch
Action ended 20:50:23: CCPSearch. Return value 0.
MSI (s) (24:48) [20:50:23:662]: Note: 1: 2205 2: 3: CCPSearch
MSI (s) (24:48) [20:50:23:662]: Note: 1: 2228 2: 3: CCPSearch 4: SELECT `Signature_` FROM `CCPSearch`
Action start 20:50:23: RMCCPSearch.
MSI (s) (24:48) [20:50:23:662]: Doing action: ValidateProductID
Action ended 20:50:23: RMCCPSearch. Return value 0.
Action start 20:50:23: ValidateProductID.
MSI (s) (24:48) [20:50:23:662]: Skipping action: CcmSetInstallDir32 (condition is false)
MSI (s) (24:48) [20:50:23:662]: Doing action: CcmSetInstallDir64
Action ended 20:50:23: ValidateProductID. Return value 1.
MSI (s) (24:48) [20:50:23:663]: Note: 1: 2235 2: 3: ExtendedType 4: SELECT `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM `CustomAction` WHERE `Action` = 'CcmSetInstallDir64'
MSI (s) (24:48) [20:50:23:663]: PROPERTY CHANGE: Adding TARGETDIR property. Its value is 'C:\Windows\CCM'.
Action start 20:50:23: CcmSetInstallDir64.
MSI (s) (24:48) [20:50:23:663]: Doing action: CcmSetInstallDirFromCmdLine
Action ended 20:50:23: CcmSetInstallDir64. Return value 1.
MSI (s) (24:48) [20:50:23:664]: Note: 1: 2235 2: 3: ExtendedType 4: SELECT `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM `CustomAction` WHERE `Action` = 'CcmSetInstallDirFromCmdLine'
MSI (s) (24:48) [20:50:23:664]: PROPERTY CHANGE: Modifying TARGETDIR property. Its current value is 'C:\Windows\CCM'. Its new value: 'C:\Windows\CCM\'.
Action start 20:50:23: CcmSetInstallDirFromCmdLine.
MSI (s) (24:48) [20:50:23:664]: Doing action: CcmSetPrimaryFolder
Action ended 20:50:23: CcmSetInstallDirFromCmdLine. Return value 1.
MSI (s) (24:48) [20:50:23:664]: Note: 1: 2235 2: 3: ExtendedType 4: SELECT `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM `CustomAction` WHERE `Action` = 'CcmSetPrimaryFolder'
MSI (s) (24:48) [20:50:23:664]: PROPERTY CHANGE: Adding PRIMARYFOLDER property. Its value is 'TARGETDIR'.
Action start 20:50:23: CcmSetPrimaryFolder.
MSI (s) (24:48) [20:50:23:665]: Doing action: FindRelatedProducts
Action ended 20:50:23: CcmSetPrimaryFolder. Return value 1.
Action start 20:50:23: FindRelatedProducts.
MSI (s) (24:48) [20:50:23:665]: PROPERTY CHANGE: Adding SMSSP1COLOCDOWNGRADE property. Its value is '{8864FB91-94EE-4F16-A144-0D82A232049D}'.
MSI (s) (24:48) [20:50:23:666]: Skipping action: SmsDetectUnsupportedUpgrade (condition is false)
MSI (s) (24:48) [20:50:23:666]: Skipping action: SmsDetectDowngrade (condition is false)
MSI (s) (24:48) [20:50:23:666]: Skipping action: CcmDetectUnsupportedUpgrade (condition is false)
MSI (s) (24:48) [20:50:23:666]: Doing action: SmsDetectColocationDowngrade
Action ended 20:50:23: FindRelatedProducts. Return value 1.
MSI (s) (24:48) [20:50:23:666]: Note: 1: 2235 2: 3: ExtendedType 4: SELECT `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM `CustomAction` WHERE `Action` = 'SmsDetectColocationDowngrade'
Action start 20:50:23: SmsDetectColocationDowngrade.
MSI (s) (24:48) [20:50:23:666]: Product: ConfigMgr Management Point -- A newer version of the Configuration Manager Client is installed. Cannot continue installing this version of the management point.
A newer version of the Configuration Manager Client is installed. Cannot continue installing this version of the management point.
Action ended 20:50:23: SmsDetectColocationDowngrade. Return value 3.
Action ended 20:50:23: INSTALL. Return value 3.
Property(S): UpgradeCode = {ABD0F60F-1622-4311-8989-106B60D784FF}
Property(S): TARGETDIR = C:\Windows\CCM\
Property(S): ALLUSERS = 1
Property(S): ErrorDialog = ErrorDialog
Property(S): ProductName = ConfigMgr Management Point
Property(S): ProductCode = {6CED3AB0-05AF-4C81-8DBE-A62661C26F40}
Property(S): PackageCode = {5CBAF9F8-A298-49C0-B874-D0F5F0F39DB4}
Property(S): Manufacturer = Microsoft Corporation
Property(S): ProductVersion = 5.00.7804.1000
Property(S): ProductLanguage = 1033
Property(S): SMSCWSREGKEYNAME = MPCWSPath
Property(S): CcmCheckRepairNotInstalled_ActionText = Abort repair if the product has not been installed.
Property(S): CcmSwitchToRepairMode_ActionText = Product has been installed. Switch to repair mode for this installation.
Property(S): CcmSuppressReboot_ActionText = Suppress machine reboot after installation.
Property(S): CcmCheckFreeDiskSpace_ActionText = Check if the target volumn has enough space for the installation.
Property(S): CcmCheckFreeDiskSpace2_ActionText = Check if the target volumn has enough space for the installation.
Property(S): CcmSetInstallDirFromCmdLine_ActionText = Property custom action for setting install directory from command line.
Property(S): CcmCreateWmiNamespacesInit_ActionText = Processes the table CcmWmiNamespace and sends the context to CcmCreateWmiNamespaces.
Property(S): CcmCreateWmiNamespaces_ActionText = Creates the WMI namespaces found in the CcmWmiNamespace table
Property(S): CcmCreateWmiNamespacesRollback_ActionText = Calls CcmRemoveWmiNamespaces. Deletes the WMI namespaces.
Property(S): CcmRemoveWmiNamespacesInit_ActionText = Processes the table CcmWmiNamespace and sends the context to CcmRemoveWmiNamespaces.
Property(S): CcmRemoveWmiNamespaces_ActionText = Deletes WMI namespaces.
Property(S): CcmRegisterWmiMofFilesInit_ActionText = Queues MOF files in the CcmWmiMofFile table to be compiled.
Property(S): CcmRegisterWmiMofFile_ActionText = Compiles MOF files that were queued by CcmRegisterWmiMofFilesInit.
Property(S): CcmWmiRollback_ActionText = Deletes the existin site policy config and then recompiles MOF to restore old WMI instances.
Property(S): CcmDeleteWmiBackup_ActionText = Deletes the back up mof of the wmi namespace created for rolling back purposes.
Property(S): CcmRemoveWmiObjectsInit_ActionText = Queries the CcmWmiObject table for WMI objects to be removed.
Property(S): CcmRemoveWmiObjects_ActionText = Removes WMI objects found by CcmRemoveWmiObjectsInit.
Property(S): CcmRemoveWmiObjectsRollback_ActionText = Calls CcmRemoveWmiObjects. Removes WMI objects found by CcmRemoveWmiObjectsInit.
Property(S): CcmCreateIISVirtualDirectoriesInit_ActionText = Processes the CcmIISVirtualDirectory table and passes that information to CcmCreateIISVirtualDirectories to create the virtual directories.
Property(S): CcmCreateIISVirtualDirectories_ActionText = Creates the virtual directories specified in the CcmIISVirtualDirectory table.
Property(S): CcmRollbackIISVirtualDirectories_ActionText = Calls CcmRemoveIISVirtualDirectories. Removes IIS Virtual Directories found in CcmRemoveIISVirtualDirectoriesInit.
Property(S): CcmRemoveIISVirtualDirectories_ActionText = Removes IIS Virtual Directories found in CcmRemoveIISVirtualDirectoriesInit.
Property(S): CcmRemoveIISVirtualDirectoriesInit_ActionText = Queries the CcmIISVirtualDirectory table for IIS Virtual Directories to be removed.
Property(S): CcmCreateIISApplicationPoolsInit_ActionText = Processes the CcmIISAplicationPool table and passes that context to CcmCreateIISAplicationPools custom action.
Property(S): CcmCreateIISApplicationPools_ActionText = Creates the application pools specified in the CcmIISAplicationPools table.
Property(S): CcmCreateIISApplicationPoolsRollback_ActionText = Calls CcmRemoveIISApplicationPools. Removes IIS Application Pools found in CcmRemoveIISApplicationPoolsInit.
Property(S): CcmRemoveIISApplicationPoolsInit_ActionText = Queries the CcmIISApplicationPool table for IIS Application Pools to be removed.
Property(S): CcmRemoveIISApplicationPools_ActionText = Removes IIS Application Pools found in CcmRemoveIISApplicationPoolsInit.
Property(S): CcmDetectFilesInUseRemoveInit_ActionText = Detect if files are in used at uninstallation.
Property(S): CcmDetectFilesInUseInit_ActionText = Detects file in use.
Property(S): CcmDetectFilesInUse_ActionText = Moves files that are in use so that they will be deleted upon the next reboot.
Property(S): CcmDetectFilesInUseRollback_ActionText = Rolls back files moved by CcmDetectFilesInUse.
Property(S): CcmDetectFilesInUseCommit_ActionText = Commits action of CcmDetectFileInUse. After this we cannot rollback.
Property(S): CcmDetectFilesInUseRemoveRollback_ActionText = Calls CcmDetectFilesInUseRollback. Rolls back the files moved by CcmDetectFilesInUse.
Property(S): CcmDetectFilesInUseRemoveCommit_ActionText = Calls CcmDetectFilesInUseCommit. Commits action of CcmDetectFileInUse. After this the action cannot be rolled back.
Property(S): CcmLookupAccountNames_ActionText = Looks up the name of the Administrators group, Users group, and Creator Owner account, then sets the properties CcmAdministratorGroupName, CcmUsersGroupName, and CcmCreatorOwnerAccountName.
Property(S): CcmRegisterPerfCountersInit_ActionText = Processes the CcmPerfApplication table for components that will be registering a performance counter.
Property(S): CcmRegisterPerfCounters_ActionText = Registers performance counters gathered in the CcmRegisterPerfCountersInit action
Property(S): CcmUnregisterPerfCountersInit_ActionText = Processes the CcmPerfApplication table for components that will be unregistering a performance counter.
Property(S): CcmUnregisterPerfCounters_ActionText = Removes performance counters gathered in the CcmUnregisterPerfCountersInit action
Property(S): CcmRegisterPerfCountersRollback_ActionText = Rolls back any changes made by CcmRegisterPerfCounters if install fails.
Property(S): CcmUnloadWmiProvidersInit_ActionText = Enumerates component table and builds a list of files that will be installed
Property(S): CcmUnloadWmiProviders_ActionText = Enumerates all providers and unloads them, verifies they are unloaded, and then reloads them.
Property(S): CcmTypelibRollbackInit_ActionText = Queues a list of type libraries to be registered on rollback.
Property(S): CcmTypelibRollback_ActionText = In the event of install failing, this event rolls back the type libraries to the state before install started.
Property(S): CcmSetObjectSecurityInit_ActionText = Queries the CcmObjectSecurity table and passes this information to CcmSetObjectSecurity.
Property(S): CcmSetObjectSecurity_ActionText = Applying security permissions
Property(S): CcmSetInstallDir32_ActionText = Property action for setting installation directory for Configuration Manager Client on 32-bit platform.
Property(S): CcmSetInstallDir64_ActionText = Property action for setting installation directory for Configuration Manager Client on 64-bit platform.
Property(S): CcmSetPrimaryFolder_ActionText = Property action for setting target installation folder.
Property(S): PRIMARYFOLDER = TARGETDIR
Property(S): VersionNT64 = 603
Property(S): CCMINSTALLDIR = C:\Windows\CCM\
Property(S): System64Folder.12C909B6_5F69_4C4D_8EC3_C225C1607933 = C:\Windows\system32\
Property(S): SystemFolder.12C909B6_5F69_4C4D_8EC3_C225C1607933 = C:\Windows\SysWOW64\
Property(S): CCMEXECFILEKEY = [#CcmExec_exe.A6940213_CD40_4753_8BA2_E803376DECC3]
Property(S): CcmDetectUpgradeOldClient_Message = A previous version of the Configuration Manager Client is installed. Please upgrade the client to Configuration Manager 2012 before attempting to upgrade.
Property(S): SmsDetectUpgradeOldMP_Message = A previous version of the Configuration Manager Management Point is installed. Please upgrade the management point to Configuration Manager 2012 before attempting to upgrade.
Property(S): SmsDetectUnsupportedUpgrade_ActionText = Detect if a previous version of the Configuration Manager Management Point is installed before upgrading Configuration Manager Client.
Property(S): CcmDetectUnsupportedUpgrade_ActionText = Detect if a previous version of the Configuration Manager Client is installed before upgrading Configuration Manager Management Point.
Property(S): CcmAbortIfEmbeddedExists_ActionText = Abort installation if the Configuration Manager Client Embedded version is installed.
Property(S): CcmRegisterHostingConfigurationInit_ActionText = Gathers configuration for Configuration Manager Client service to be registered on the system.
Property(S): CcmRegisterHostingConfiguration_ActionText = Register configuration for Configuration Manager Client service.
Property(S): CcmRegisterHostedApplicationsInit_ActionText = Gathers hosted out-of-proc DCOM applications running inside of Configuration Manager Client to be registered on the system.
Property(S): CcmRegisterHostedApplications_ActionText = Register hosted out-of-proc DCOM applications running inside of Configuration Manager Client.
Property(S): CcmRegisterHostedApplicationsRollback_ActionText = Rollback the registration of hosted out-of-proc DCOM applications running inside of Configuration Manager Client.
Property(S): CcmRemoveHostedApplicationsInit_ActionText = Prepare to remove the registration of hosted out-of-proc DCOM applications running inside of Configuration Manager Client.
Property(S): CcmRemoveHostedApplications_ActionText = Remove the registration of hosted out-of-proc DCOM applications running inside of Configuration Manager Client.
Property(S): CcmRegisterEndpointsInit_ActionText = Gathers information such as log file name on each endpoint to be registered on the system.
Property(S): CcmRegisterEndpoint_ActionText = Registers endpoint gathered in the action CcmRegisterEndpointsInit with WMI.
Property(S): CcmRegisterEndpointRollback_ActionText = In the event of a failed installation, this action rolls back the changes from CcmRegisterEndpoint.
Property(S): CcmRemoveEndpointsInit_ActionText = Gathers information for each endpoint to be removed from the system.
Property(S): CcmRemoveEndpoint_ActionText = Removes endpoint gathered in the action CcmRemoveEndpointsInit with WMI.
Property(S): CcmRegisterSystemTasksInit_ActionText = Processes the CcmSystemTask table and passes this information to CcmRegisterSystemTask.
Property(S): CcmRegisterSystemTask_ActionText = Registers a System Task with WMI.
Property(S): CcmRegisterSystemTaskRollback_ActionText = Rolls back the changes made by CcmRegisterSystemTask.
Property(S): CcmRemoveSystemTasksInit_ActionText = Processes the CcmSystemTask table and passes this information to CcmRemoveSystemTask.
Property(S): CcmRemoveSystemTask_ActionText = Deletes a System Task from WMI.
Property(S): CcmRegisterProduct_ActionText = If product is registered in MSI database, then product is registered with WMI.
Property(S): CcmRegisterProductRollback_ActionText = Calls CcmUnregisterProduct. Deletes the instance from the WMI in the Configuration Manager namespace using the ProductCode instance in the session.
Property(S): CcmUnregisterProduct_ActionText = Deletes the instance from WMI in ccm namespace using the ProductCode instance in the session.
Property(S): CcmRegisterComponentsInit_ActionText = Generates the list of components for CcmRegisterComponets action to register.
Property(S): CcmRegisterComponents_ActionText = Registers components passed in from CcmRegisterComponentsInit
Property(S): CcmRegisterComponentsRollback_ActionText = In the event of a failed installation, this action rolls back the changes from CcmRegisterComponents.
Property(S): CcmUnregisterComponentsInit_ActionText = Generates the list of components for CcmUnregisterComponets action to unregister.
Property(S): CcmUnregisterComponents_ActionText = Unregisters components passed in from the action CcmUnregisterComponentsInit.
Property(S): CcmSetupLoggingInit_ActionText = Gathers log file information from the LogFile table and passes this information to CcmSetupLogging.
Property(S): CcmSetupLogging_ActionText = Sets component logging information in WMI.
Property(S): CcmStopService_ActionText = Stops the ccmexec service.
Property(S): CcmStopServiceRollback_ActionText = Calls CcmStartService. Starts the ccmexec service.
Property(S): CcmStartService_ActionText = Starts the ccmexec service.
Property(S): CcmClearServiceSetupStamp_ActionText = Clear the time stamp for blocking the ccmexec service from starting up during upgrade.
Property(S): CcmSetServiceConfigInit_ActionText = Gathers ServiceData and then queues actions CcmSetServiceConfig and CcmMigrateMessagingQueues.
Property(S): CcmSetServiceConfig_ActionText = Sets WMI ServiceRootDir and configures CCMEXEC service.
Property(S): CcmConfigDCOMInit_ActionText = Processes the CcmDCOMAplication table and checks to see if the DCOM Component is being updated. If so, passes that information to custom action CcmConfigDCOM.
Property(S): CcmConfigDCOM_ActionText = Configures registry key permissions for the DCOM Components passed from CcmConfigDCOMInit.
Property(S): CcmFixupServiceConfigInit_ActionText = Gathers the services or load ordering groups which must be started before ccmexec starts.
Property(S): CcmFixupServiceConfig_ActionText = Sets the services or load ordering groups which must be started before ccmexec can be started.
Property(S): CcmRemoveService_ActionText = Removes BITS jobs and deletes the messaging queues.
Property(S): CcmRemoveLanternDocuments_ActionText = Removing documents from Microsoft Policy Platform that have been submitted by Configuration Manager authority.
Property(S): CcmSetPortConfigInit_ActionText = This custom action specifies the port the client should use when communicating with the management point and the server locator point.
Property(S): CcmSetHttpsConfigInit_ActionText = This custom action configures the https port and http state.
Property(S): CcmPreserveLastStateSerialNum_ActionText = Custom action to preserve last state message serial number.
Property(S): CcmInitializePolicyInit_ActionText = Gather default policy information.
Property(S): CcmInitializePolicy_ActionText = Sets and initializes default policy.
Property(S): CcmMigratePolicySettingsInit_ActionText = Custom action to schedule the deferred execution of CcmMigratePolicySettings custom action.
Property(S): CcmMigratePolicySettings_ActionText = Compiles Mof file to migrate root\ccm\Policy namespace schema from Pre-V4 Beta2 to V4 and above.
Property(S): CcmMigratePolicySettingsCommit_ActionText = Just deletes the temporary MOF file.
Property(S): CcmMigratePolicySettingsRollback_ActionText = Just deletes the temporary MOF file. Actual Rollback is done by the rollback action that rollbacks root\ccm namespace.
Property(S): ExpandCcmExecFileKey_ActionText = Property action for setting CcmExec file key.
Property(S): CcmMinAppVersion = 5.00.7000.0000
Property(S): CcmMaxAppVersion = 5.00.9000.0000
Property(S): SystemFolder.A6940213_CD40_4753_8BA2_E803376DECC3 = C:\Windows\SysWOW64\
Property(S): System64Folder.A6940213_CD40_4753_8BA2_E803376DECC3 = C:\Windows\system32\
Property(S): SystemFolder.F65FD590_5BEA_48BE_8408_26F7244E8B61 = C:\Windows\SysWOW64\
Property(S): System64Folder.F65FD590_5BEA_48BE_8408_26F7244E8B61 = C:\Windows\system32\
Property(S): USELEGACYSTATEMESSAGESTORE = 1
Property(S): CcmValidateCustomWebSite_ActionText = This custom action validates that either the custom website or default website (if a custom website is not specified) can be used.
Property(S): CcmValidateServerConfig_ActionText = Validates that IIS, BITS and WebDAV is installed and properly configured setup.
Property(S): CcmLookupIISAnonymousAccountName_ActionText = Looks up the IIS AnonymousUserName and then sets the IISAnonymousUserAccount property to this value.
Property(S): CcmSetServiceMPConfigInit_ActionText = Gathers Incoming and Outgoing directories and virtual directories for the MP. Queues the action CcmSetServiceMPConfig.
Property(S): CcmSetServiceMPConfig_ActionText = Sets Incoming and Outgoing directories and virtual directories in WMI.
Property(S): CcmSetServerDataRoot_ActionText = Property action for setting service data root folder.
Property(S): CcmSetServerDataRootInstallDir_ActionText = Property action for setting service data folder.
Property(S): CcmIncomingVDirName = CCM_Incoming
Property(S): SystemFolder.BFC13682_FB8F_4455_9724_4DDBBBF713D7 = C:\Windows\SysWOW64\
Property(S): System64Folder.BFC13682_FB8F_4455_9724_4DDBBBF713D7 = C:\Windows\system32\
Property(S): CCMSERVERDATAROOT = h:\Program Files\Microsoft Configuration Manager
Property(S): CcmSystemVDirName = CCM_System
Property(S): CcmSystemRegVDirName = CCM_System_WindowsAuth
Property(S): CcmSystemAltAuthVDirName = CCM_System_AltAuth
Property(S): SMSCACHEDIR = Default
Property(S): SMSCACHEFLAGS = Default
Property(S): DISABLESITEOPT = Default
Property(S): DISABLECACHEOPT = Default
Property(S): SMSCACHESIZE = 5120
Property(S): SmsShellNotify_ActionText = Notifies the shell for the file-association icon changes.
Property(S): CCMINSTALLMSMQ = FALSE
Property(S): CCMINSTALLMP = 1
Property(S): ARPSYSTEMCOMPONENT = 1
Property(S): ARPNOREMOVE = 1
Property(S): ARPNOMODIFY = 1
Property(S): CCMENABLELOGGING_Default = FALSE
Property(S): CCMLOGLEVEL_Default = 1
Property(S): CCMLOGMAXSIZE_Default = 2000000
Property(S): CCMLOGMAXHISTORY_Default = 1
Property(S): SecureCustomProperties = CCMENABLELOGGING;CCMLOGLEVEL;CCMLOGMAXHISTORY;CCMLOGMAXSIZE;CCMDEBUGLOGGING;CCMOSINSTALLPATHS;CCMINSTALLMSMQ;CCMINSTALLMP;SMSUPGRADEPRODUCTS;CCMSERVERDATAROOT;SMSUPLEVELPRODUCTS;USESMSPORTS;SMSPORTS;CCMHTTPPORT;SMSSP1COLOCDOWNGRADE;USESMSSSLPORTS;SMSSSLPORTS;SMSSSLSTATE;CCMHTTPSPORT;CCMHTTPSCERTNAME;SMSFWKUPGRADEFROMPREV4;CCMFWKUPGRADEFROMPREV4;CLIENTFWKUPGRADEFROMCM2007;SMSCWS;CCMSHAREMODE
Property(S): AdminProperties = CCMENABLELOGGING;CCMLOGLEVEL;CCMLOGMAXHISTORY;CCMLOGMAXSIZE;CCMDEBUGLOGGING;CCMOSINSTALLPATHS;CCMINSTALLMSMQ;CCMINSTALLMP;CCMSERVERDATAROOT;CCMALLOWSILENTREBOOT;CCMHTTPPORT;CCMHTTPSPORT;CCMHTTPSCERTNAME;SMSCWS
Property(S): CcmDefaultPolicyAuthorityPriority = 10
Property(S): SmsDetectColocationDowngrade_Message = A newer version of the Configuration Manager Client is installed. Cannot continue installing this version of the management point.
Property(S): SmsDetectColocationDowngrade_ActionText = Detect if a newer version of the Configuration Management Client is installed before installing the Configuration Manager Management Point.
Property(S): SmsDetectDowngrade_ActionText = Check if a newer version of the Configuration Manager Client is already installed.
Property(S): SmsMpRepairSucceeded_ActionText = Sends a wmi event to indicate MP repair succeeded.
Property(S): SmsDetectMSXMLRebootRequired_ActionText = Tries to create an instance of SAXXMLReader to determine if a reboot is required.
Property(S): SmsMpSetDefaultPolicyAuthority_ActionText = Set default policy authority for the Configuration Manager Management Point.
Property(S): SmsMpSerializedKeyExist_ActionText = Wait for the Configuration Manager Management Point serialized key to exist.
Property(S): ButtonText_Next = &Next >
Property(S): ButtonText_Back = < &Back
Property(S): ButtonText_Cancel = &Cancel
Property(S): ButtonText_Finish = &Finish
Property(S): ButtonText_Install = &Install
Property(S): ButtonText_Close = &Close
Property(S): ButtonText_OK = &OK
Property(S): ButtonText_Abort = &Abort
Property(S): ButtonText_Ignore = &Ignore
Property(S): ButtonText_No = &No
Property(S): ButtonText_Yes = &Yes
Property(S): ButtonText_Retry = &Retry
Property(S): ButtonText_Exit = &Exit
Property(S): FilesInUse_Info = Setup has detected that it needs to update some files that are currently in use by other processes.
To prevent having to reboot the machine, please close the following applications:
Property(S): DefaultUIFont = DefaultDlgFont
Property(S): DialogBox_Title = ConfigMgr Management Point Setup
Property(S): WelcomeDialog_Info = This will install the ConfigMgr Management Point.
Property(S): InstallDialog_Title = Install
Property(S): InstallDialog_SubTitle = The product is now ready to install
Property(S): InstallDialog_Info = Click Next to proceed.
Property(S): ProgressDialog_Title = Please Wait
Property(S): ProgressDialog_SubTitle = Setup is configuring your system.
Property(S): CompleteDialog_Title = Setup Complete
Property(S): CompleteDialog_SubTitle = Setup has finished updating your system.
Property(S): CompleteDialog_Info = Setup was successful.
Property(S): UserExitDialog_Title = Setup Aborted
Property(S): UserExitDialog_SubTitle = Setup was cancelled
Property(S): UserExitDialog_Info = The ConfigMgr Management Point setup was cancelled.
Property(S): InstallErrorDialog_Title = Setup Aborted
Property(S): InstallErrorDialog_SubTitle = Setup failed
Property(S): InstallErrorDialog_Info = Setup encountered an error and could not continue.
Property(S): SystemFolder.1114972D_590D_4AB6_BA2E_779928CEDCC2 = C:\Windows\SysWOW64\
Property(S): System64Folder.1114972D_590D_4AB6_BA2E_779928CEDCC2 = C:\Windows\system32\
Property(S): SMSSP1COLOCDOWNGRADE = {8864FB91-94EE-4F16-A144-0D82A232049D}
Property(S): MsiLogFileLocation = h:\Program Files\Microsoft Configuration Manager\logs\mpMSI.log
Property(S): ProductState = -1
Property(S): PackagecodeChanging = 1
Property(S): USESMSPORTS = TRUE
Property(S): SMSPORTS = 80
Property(S): USESMSSSLPORTS = TRUE
Property(S): SMSSSLPORTS = 443
Property(S): USESMSSSL = TRUE
Property(S): SMSSSLSTATE = 0
Property(S): CCMENABLELOGGING = TRUE
Property(S): CCMLOGLEVEL = 1
Property(S): CCMLOGMAXSIZE = 1000000
Property(S): CCMLOGMAXHISTORY = 1
Property(S): CURRENTDIRECTORY = H:\Program Files\Microsoft Configuration Manager\bin\x64
Property(S): CLIENTUILEVEL = 3
Property(S): MSICLIENTUSESEXTERNALUI = 1
Property(S): CLIENTPROCESSID = 6556
Property(S): MsiRestartManagerSessionKey = d8d0cefc1249514889002637bb750a41
Property(S): VersionDatabase = 200
Property(S): MsiSystemRebootPending = 1
Property(S): VersionMsi = 5.00
Property(S): VersionNT = 603
Property(S): WindowsBuild = 9600
Property(S): ServicePackLevel = 0
Property(S): ServicePackLevelMinor = 0
Property(S): MsiNTProductType = 3
Property(S): MsiNTSuiteDataCenter = 1
Property(S): WindowsFolder = C:\Windows\
Property(S): WindowsVolume = C:\
Property(S): System64Folder = C:\Windows\system32\
Property(S): SystemFolder = C:\Windows\SysWOW64\
Property(S): RemoteAdminTS = 1
Property(S): TempFolder = C:\Windows\TEMP\
Property(S): ProgramFilesFolder = C:\Program Files (x86)\
Property(S): CommonFilesFolder = C:\Program Files (x86)\Common Files\
Property(S): ProgramFiles64Folder = C:\Program Files\
Property(S): CommonFiles64Folder = C:\Program Files\Common Files\
Property(S): AppDataFolder = C:\Windows\system32\config\systemprofile\AppData\Roaming\
Property(S): FavoritesFolder = C:\Windows\system32\config\systemprofile\Favorites\
Property(S): NetHoodFolder = C:\Windows\system32\config\systemprofile\AppData\Roaming\Microsoft\Windows\Network Shortcuts\
Property(S): PersonalFolder = C:\Windows\system32\config\systemprofile\Documents\
Property(S): PrintHoodFolder = C:\Windows\system32\config\systemprofile\AppData\Roaming\Microsoft\Windows\Printer Shortcuts\
Property(S): RecentFolder = C:\Windows\system32\config\systemprofile\AppData\Roaming\Microsoft\Windows\Recent\
Property(S): SendToFolder = C:\Windows\system32\config\systemprofile\AppData\Roaming\Microsoft\Windows\SendTo\
Property(S): TemplateFolder = C:\ProgramData\Microsoft\Windows\Templates\
Property(S): CommonAppDataFolder = C:\ProgramData\
Property(S): LocalAppDataFolder = C:\Windows\system32\config\systemprofile\AppData\Local\
Property(S): MyPicturesFolder = C:\Windows\system32\config\systemprofile\Pictures\
Property(S): AdminToolsFolder = C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Administrative Tools\
Property(S): StartupFolder = C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup\
Property(S): ProgramMenuFolder = C:\ProgramData\Microsoft\Windows\Start Menu\Programs\
Property(S): StartMenuFolder = C:\ProgramData\Microsoft\Windows\Start Menu\
Property(S): DesktopFolder = C:\Users\Public\Desktop\
Property(S): FontsFolder = C:\Windows\Fonts\
Property(S): GPTSupport = 1
Property(S): OLEAdvtSupport = 1
Property(S): ShellAdvtSupport = 1
Property(S): MsiAMD64 = 6
Property(S): Msix64 = 6
Property(S): Intel = 6
Property(S): PhysicalMemory = 5372
Property(S): VirtualMemory = 4017
Property(S): AdminUser = 1
Property(S): MsiTrueAdminUser = 1
Property(S): LogonUser = SYSTEM
Property(S): UserSID = S-1-5-18
Property(S): UserLanguageID = 1033
Property(S): ComputerName = [servername]
Property(S): SystemLanguageID = 1033
Property(S): ScreenX = 1024
Property(S): ScreenY = 768
Property(S): CaptionHeight = 23
Property(S): BorderTop = 1
Property(S): BorderSide = 1
Property(S): TextHeight = 16
Property(S): TextInternalLeading = 3
Property(S): ColorBits = 32
Property(S): TTCSupport = 1
Property(S): Time = 20:50:23
Property(S): Date = 8/27/2014
Property(S): MsiNetAssemblySupport = 4.0.30319.33440
Property(S): MsiWin32AssemblySupport = 6.3.9600.16384
Property(S): RedirectedDllSupport = 2
Property(S): MsiRunningElevated = 1
Property(S): Privileged = 1
Property(S): DATABASE = C:\Windows\Installer\6257f6f.msi
Property(S): OriginalDatabase = h:\Program Files\Microsoft Configuration Manager\bin\x64\mp.msi
Property(S): UILevel = 2
Property(S): ACTION = INSTALL
=== Logging stopped: 8/27/2014 20:50:23 ===
MSI (s) (24:48) [20:50:23:717]: Note: 1: 1708
MSI (s) (24:48) [20:50:23:717]: Product: ConfigMgr Management Point -- Installation operation failed.
MSI (s) (24:48) [20:50:23:718]: Windows Installer installed the product. Product Name: ConfigMgr Management Point. Product Version: 5.00.7804.1000. Product Language: 1033. Manufacturer: Microsoft Corporation. Installation success or error status: 1603.
MSI (s) (24:48) [20:50:23:721]: Deferring clean up of packages/files, if any exist
MSI (s) (24:48) [20:50:23:721]: MainEngineThread is returning 1603
MSI (s) (24:FC) [20:50:23:725]: RESTART MANAGER: Session closed.
MSI (s) (24:FC) [20:50:23:725]: No System Restore sequence number for this installation.
MSI (s) (24:FC) [20:50:23:726]: User policy value 'DisableRollback' is 0
MSI (s) (24:FC) [20:50:23:726]: Machine policy value 'DisableRollback' is 0
MSI (s) (24:FC) [20:50:23:726]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (24:FC) [20:50:23:726]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (24:FC) [20:50:23:726]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (24:FC) [20:50:23:727]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (9C:58) [20:50:23:728]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (9C:58) [20:50:23:728]: MainEngineThread is returning 1603
=== Verbose logging stopped: 8/27/2014 20:50:23 ===A newer version of the Configuration Manager Client is installed. Cannot continue installing this version of the management point.
Action ended 20:50:23: SmsDetectColocationDowngrade. Return value 3.
Action ended 20:50:23: INSTALL. Return value 3.
The installer certainly thinks that you still have a previous ConfigMgr client installed. Perhaps you haven't completely removed it. Use ccmclean.exe from the SMS 2003 tool kit.
If that fails, why not just rebuild the server - you've said that this is a fresh install. I don't like too much messing at the beginning. This can be difficult enough - you need to start with a clean installation of the product.
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson -
Component is not getting displayed in process scheduler menu
Hi All,
I have created a project and created/registered a component in that project. I have also added a page which is having a record definition with a record named L_RUNCNTL having two search fields, to this component and configured L_RUNCNTL as search record for this component.
I have registered this component with below details:
Menu Name : PROCESS_SCHEDULER
Bar Name : PROCESS
Folder Name as PT_PROCESS_SCHEDULER
Select “Always Use default local node?” Check box
Permission List : PTPT1000
But after registration, when I open process scheduler menu I dont see this component listed. However, previously I created a component in this project and registered it with same details given above and I could see it in process scheduler menu.
I am surprised why another component registered with same details is not getting displayed in process scheduler menu.Thanks Michel,
I got this problem resolved. Here is what I did:
Ran portal security sync at the navigation PeopleTools > Portal > Portal Security Sync.
Cleared browser cache, accessed the page again and saw the link was available. -
EP 6.0 SP2: User self-registration in Company exception
Hi!
It's seems this question to SAP' team.
I have installed EP 6.0 SP2 patch 4 hf 7 and CM patch 4 hf 4. I want to implement Delegated Administration. I set following options and restart J2EE engine:
ume.logon.selfreg=true
ume.admin.selfreg_company=true
ume.tpd.companies=company1;company2;company3;
ume.tpd.imp.class=com.sap.security.core.tpd.SimpleTPD
On screen "Welcome to User Registration" I filled in all necessary data and choose Company. Exception appears in console log file when on the next screen ("Apply for Company company1...") I press "submit":
Aug 30, 2004 9:40:42 AM # Client_Thread_0 Fatal >>> JSPCompiler >>> ERROR in Compiling :JSPFileInfo :4365243
JSP File : F:\usr\sap\REAP\j2ee\j2ee_00\cluster\server\services\servlet_jsp\work\jspTemp\irj\root\WEB-INF\portal\portalapps\c
om.sap.portal.usermanagement.admin\selfreg_exception.jsp
Class Name: sapportalsjspselfreg_exception
Java File : F:\usr\sap\REAP\j2ee\j2ee_00\cluster\server\services\servlet_jsp\work\jspTemp\irj\root\WEB-INF\portal\portalapps\
com.sap.portal.usermanagement.admin\work\_sapportalsjsp_selfreg_exception.java
Package Name :
Class File : F:\usr\sap\REAP\j2ee\j2ee_00\cluster\server\services\servlet_jsp\work\jspTemp\irj\root\WEB-INF\portal\portalapps
\com.sap.portal.usermanagement.admin\work
_sapportalsjsp_selfreg_exception.class
Is out dated : false
com.sapportals.portal.prt.servlets_jsp.server.compiler.CompilingException: Error in executing a process for compilation, F:/u
sr/sap/REAP/j2ee/j2ee_00/cluster/server/services/servlet_jsp/work/jspTemp/irj/root/WEB-INF/portal/portalapps/com.sap.portal.u
sermanagement.admin/work/_sapportalsjsp_selfreg_exception.java:93: cannot resolve symbol
symbol : class ComponentAccessToLogic
location: class sapportalsjspselfreg_exception
com.sap.security.core.admin.IAccessToLogic proxy = new ComponentAccessToLogic (componentRequest, aR
esponse);
^
1 error
at com.sapportals.portal.prt.servlets_jsp.server.compiler.J2eeCompiler_6_20.launchCompilerProcess(J2eeCompiler_6_20.j
ava:577)
at com.sapportals.portal.prt.servlets_jsp.server.compiler.J2eeCompiler_6_20.compileExternal(J2eeCompiler_6_20.java:37
3)
at com.sapportals.portal.prt.servlets_jsp.server.compiler.J2eeCompiler_6_20.compile(J2eeCompiler_6_20.java:689)
at com.sapportals.portal.prt.servlets_jsp.server.jsp.JSPParser.parse(JSPParser.java:2143)
at com.sapportals.portal.prt.servlets_jsp.server.jsp.JSPCompiler.compile(JSPCompiler.java:76)
at com.sapportals.portal.prt.servlets_jsp.server.jsp.JSPCompiler.run(JSPCompiler.java:120)
at com.sapportals.portal.prt.core.broker.JSPComponentItem.compileJSP(JSPComponentItem.java:263)
at com.sapportals.portal.prt.core.broker.JSPComponentItem.getComponentInstance(JSPComponentItem.java:122)
at com.sapportals.portal.prt.core.broker.PortalComponentItemFacade.service(PortalComponentItemFacade.java:338)
at com.sapportals.portal.prt.core.broker.PortalComponentItem.service(PortalComponentItem.java:817)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:385)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:462)
at com.sapportals.portal.prt.component.AbstractComponentResponse.include(AbstractComponentResponse.java:88)
at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:226)
at com.sap.security.core.admin.ComponentAccessToLogic.gotoPage(ComponentAccessToLogic.java:129)
at com.sap.security.core.admin.SelfRegLogic.executeRequest(SelfRegLogic.java:192)
at com.sapportals.portal.prt.component.usermanagement.admin.SelfRegComponent.doContent(SelfRegComponent.java:75)
If it necessary I can provide full stack trace...
Is it some configuration problem or portal's error?
WBR, Lnk.I have a similar problem.
Sep 29, 2004 12:16:01 PM # Client_Thread_4 Warning Authentication error.
com.sap.security.api.NoSuchUserAccountException: USER_AUTH_FAILED
at com.sap.security.core.imp.AbstractUserAccount.<init>(AbstractUserAccount.java:290)
at com.sap.security.core.imp.AbstractUserAccount.<init>(AbstractUserAccount.java:242)
at com.sap.security.core.imp.DBTextFileUserAccount.<init>(DBTextFileUserAccount.java:37)
at com.sap.security.core.imp.UserAccountFactory.getUserAccountByLogonId(UserAccountFactory.java:335)
at com.sap.security.core.imp.UserAccountFactory.getAuthenticatedUserAccount(UserAccountFactory.java:685)
at com.sap.security.core.logon.imp.DefaultLoginModule.login(DefaultLoginModule.java:253)
at com.sap.security.core.logon.imp.LoginContext.personalizeRequest(LoginContext.java:96)
at com.sap.security.core.logon.imp.JUMAuthenticator.logon(JUMAuthenticator.java:766)
at com.sapportals.portal.prt.component.usermanagement.admin.SelfRegComponent.doAfterContent(SelfRegComponent.java:123)
at com.sapportals.portal.prt.component.AbstractPortalComponent.handleEvent(AbstractPortalComponent.java:404)
at com.sapportals.portal.prt.pom.ComponentNode.handleEvent(ComponentNode.java:250)
at com.sapportals.portal.prt.pom.PortalNode.fireEventOnNode(PortalNode.java:333)
at com.sapportals.portal.prt.core.PortalRequestManager.traverseAndFire(PortalRequestManager.java:797)
at com.sapportals.portal.prt.core.PortalRequestManager.traverseAndFire(PortalRequestManager.java:803)
at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:684)
at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:208)
at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:532)
at java.security.AccessController.doPrivileged(Native Method)
at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:415)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.inqmy.services.servlets_jsp.server.InvokerServlet.service(InvokerServlet.java:126)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.inqmy.services.servlets_jsp.server.RunServlet.runSerlvet(RunServlet.java:149)
at com.inqmy.services.servlets_jsp.server.ServletsAndJspImpl.startServlet(ServletsAndJspImpl.java:832)
at com.inqmy.services.httpserver.server.RequestAnalizer.checkFilename(RequestAnalizer.java:665)
at com.inqmy.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:312)
at com.inqmy.services.httpserver.server.Response.handle(Response.java:173)
at com.inqmy.services.httpserver.server.HttpServerFrame.request(HttpServerFrame.java:1245)
at com.inqmy.core.service.context.container.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:36)
at com.inqmy.core.cluster.impl5.ParserRunner.run(ParserRunner.java:55)
at com.inqmy.core.thread.impl0.ActionObject.run(ActionObject.java:46)
at java.security.AccessController.doPrivileged(Native Method)
at com.inqmy.core.thread.impl0.SingleThread.run(SingleThread.java:148)
Nested Exception:
com.sap.security.core.persistence.datasource.PersistenceException: User account for logonid "ricardom" not found!
at com.sap.security.core.imp.AbstractUserAccount.<init>(AbstractUserAccount.java:290)
at com.sap.security.core.imp.AbstractUserAccount.<init>(AbstractUserAccount.java:242)
at com.sap.security.core.imp.DBTextFileUserAccount.<init>(DBTextFileUserAccount.java:37)
at com.sap.security.core.imp.UserAccountFactory.getUserAccountByLogonId(UserAccountFactory.java:335)
at com.sap.security.core.imp.UserAccountFactory.getAuthenticatedUserAccount(UserAccountFactory.java:685)
at com.sap.security.core.logon.imp.DefaultLoginModule.login(DefaultLoginModule.java:253)
at com.sap.security.core.logon.imp.LoginContext.personalizeRequest(LoginContext.java:96)
at com.sap.security.core.logon.imp.JUMAuthenticator.logon(JUMAuthenticator.java:766)
at com.sapportals.portal.prt.component.usermanagement.admin.SelfRegComponent.doAfterContent(SelfRegComponent.java:123)
at com.sapportals.portal.prt.component.AbstractPortalComponent.handleEvent(AbstractPortalComponent.java:404)
at com.sapportals.portal.prt.pom.ComponentNode.handleEvent(ComponentNode.java:250)
at com.sapportals.portal.prt.pom.PortalNode.fireEventOnNode(PortalNode.java:333)
at com.sapportals.portal.prt.core.PortalRequestManager.traverseAndFire(PortalRequestManager.java:797)
at com.sapportals.portal.prt.core.PortalRequestManager.traverseAndFire(PortalRequestManager.java:803)
at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:684)
at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:208)
at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:532)
at java.security.AccessController.doPrivileged(Native Method)
at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:415)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.inqmy.services.servlets_jsp.server.InvokerServlet.service(InvokerServlet.java:126)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.inqmy.services.servlets_jsp.server.RunServlet.runSerlvet(RunServlet.java:149)
at com.inqmy.services.servlets_jsp.server.ServletsAndJspImpl.startServlet(ServletsAndJspImpl.java:832)
at com.inqmy.services.httpserver.server.RequestAnalizer.checkFilename(RequestAnalizer.java:665)
at com.inqmy.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:312)
at com.inqmy.services.httpserver.server.Response.handle(Response.java:173)
at com.inqmy.services.httpserver.server.HttpServerFrame.request(HttpServerFrame.java:1245)
at com.inqmy.core.service.context.container.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:36)
at com.inqmy.core.cluster.impl5.ParserRunner.run(ParserRunner.java:55)
at com.inqmy.core.thread.impl0.ActionObject.run(ActionObject.java:46)
at java.security.AccessController.doPrivileged(Native Method)
at com.inqmy.core.thread.impl0.SingleThread.run(SingleThread.java:148)
Sep 29, 2004 12:16:01 PM # Client_Thread_4 Warning [class=com.sap.security.core.admin.SelfRegComponent][method=Logging in failed][cl=2320]
javax.security.auth.login.LoginException: USER_AUTH_FAILED
at com.sap.security.core.logon.imp.LoginContext.personalizeRequest(LoginContext.java:133)
at com.sap.security.core.logon.imp.JUMAuthenticator.logon(JUMAuthenticator.java:766)
at com.sapportals.portal.prt.component.usermanagement.admin.SelfRegComponent.doAfterContent(SelfRegComponent.java:123)
at com.sapportals.portal.prt.component.AbstractPortalComponent.handleEvent(AbstractPortalComponent.java:404)
at com.sapportals.portal.prt.pom.ComponentNode.handleEvent(ComponentNode.java:250)
at com.sapportals.portal.prt.pom.PortalNode.fireEventOnNode(PortalNode.java:333)
at com.sapportals.portal.prt.core.PortalRequestManager.traverseAndFire(PortalRequestManager.java:797)
at com.sapportals.portal.prt.core.PortalRequestManager.traverseAndFire(PortalRequestManager.java:803)
at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:684)
at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:208)
at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:532)
at java.security.AccessController.doPrivileged(Native Method)
at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:415)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.inqmy.services.servlets_jsp.server.InvokerServlet.service(InvokerServlet.java:126)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.inqmy.services.servlets_jsp.server.RunServlet.runSerlvet(RunServlet.java:149)
at com.inqmy.services.servlets_jsp.server.ServletsAndJspImpl.startServlet(ServletsAndJspImpl.java:832)
at com.inqmy.services.httpserver.server.RequestAnalizer.checkFilename(RequestAnalizer.java:665)
at com.inqmy.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:312)
at com.inqmy.services.httpserver.server.Response.handle(Response.java:173)
at com.inqmy.services.httpserver.server.HttpServerFrame.request(HttpServerFrame.java:1245)
at com.inqmy.core.service.context.container.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:36)
at com.inqmy.core.cluster.impl5.ParserRunner.run(ParserRunner.java:55)
at com.inqmy.core.thread.impl0.ActionObject.run(ActionObject.java:46)
at java.security.AccessController.doPrivileged(Native Method)
at com.inqmy.core.thread.impl0.SingleThread.run(SingleThread.java:148)
Thanks.
Bejar.
Maybe you are looking for
-
Hi I am traveling and have hooked up my ipad 2 via hdmi connector to the tv. It is mirroring the screen but when I go to play a purchased tv show it does not play. Any advice would be appreciated.
-
Vpn connected to Pix but no Internet Access after connection
Hi, We have just changed over our firewall to a Pix 515. The VPN Client (4.6) has been set up and remote users can connect ok and authenticate using Windows IAS. However, once they connect to the VPN they can no longer surf the internet. Our support
-
My Iweb album page is missing 2 albums on Safari and one album on Fire fox
I have create a web site with some album pages. On One page that c0ontains 6 albums, 2 are missing when I use Safari but none are missing when I use Firefox. On a second page that contains 4 albums, 2 are missing when I use Safari and 1 is missing wh
-
Read into report from On-line Document
I have a report that substract all the comment lines from the source code and print them by screen, now I want to add to my report the on-line documentation "&purpose&, &prerequisites&,....", but I only get to print that on screen I use the internal
-
32-bit Driver Issues (OK in 64-bit)
I'm hoping someone from Lenovo monitors this forum... System: T500 2242-CTO w/ Integrated Graphics, Intel P8400, 3GB DDR3 I have two 2.5" SATA drives, on one I loaded Windows 7 32-bit and on the other I loaded Windows 7 64-bit. I have discovered some