Registration for devices

I had register my device to https://supportprofile.apple.com/ but it's not longer showing it.. when I tried to register it again.. it tells me "
According to our records, this serial number is registered to another Apple ID. If you have more than one Apple ID, log in to My Support Profile with that Apple ID to see your other registered products. Not sure if you have another Apple ID? Find out." how I can fix this problem?
How can I find out what apple ID it was registered under? AFAIK, I have only one ID that I remember registering to it.
Thanks

You'll need to call Apple Support and discuss the problem with them. They may ask for a receipt showing your purchase of the device from an authorized dealer before they'll be able to do anything.
Regards.

Similar Messages

I have an apple id but i didn't complete the registration for itunes so i couldn't sign in to icloud...what should i do to find my lost ipad?

I've just lost my ipad yesterday...i changed my old email with the new one but i'm not complete the registration for the itunes yet...and shortly i lost my ipad...now i'm trying to login to icloud to find my lost ipad but this message appear "your apple id must be used to set up icloud on an iOS or OS X device before you can use icloud.com" my apple id is work but i couldn't sign in to icloud....what should i do for now?
Is there any solution?
Thank you.

http://www.youtube.com/watch?v=gmOmd_WFp6o
This was helpful for getting icloud set up from my pc...but someone said that they had it on their pc and then it disappeared. Fun! Fun! Fun!

UCM Informix Query for Device

All,
I am trying to align a device, e.g. IP Phone with the UCM Node in which the device registers to. My version of UCM is 9.1.2. I have used the following syntax to obtain various information such as EndUser, Class, Model, etc. which works fine.
run sql \
SELECT g.name, g.a6 AS Street, g.a2 AS County, g.a3 AS City, g.pc AS ZipCode, g.flr AS Floor, \
eu.userid, eu.lastname, eu.firstname, eu.department, eu.manager, eu.telephonenumber, \
d.Name AS Device, \
tc.name AS Class, \
tm.name AS Model, \
np.dnorpattern AS DN \
FROM Device d \
LEFT JOIN typeclass AS tc ON d.tkclass = tc.enum \
LEFT JOIN typemodel AS tm ON d.tkmodel = tm.enum \
LEFT JOIN EndUser AS eu ON d.fkEndUser = eu.pkid \
LEFT JOIN DeviceNumPlanMap AS dnpm ON dnpm.fkdevice = d.pkid \
LEFT JOIN NumPlan AS np ON dnpm.fknumplan = np.pkid \
LEFT JOIN geolocation AS g ON g.pkid = d.fkgeolocation \
WHERE eu.department = 'Data Processing'
Next, I am simply trying to add the 'processnode' in which the device registers to by the following.
run sql \
SELECT g.name, g.a6 AS Street, g.a2 AS County, g.a3 AS City, g.pc AS ZipCode, g.flr AS Floor, \
eu.userid, eu.lastname, eu.firstname, eu.department, eu.manager, eu.telephonenumber, \
d.Name AS Device, \
tc.name AS Class, \
tm.name AS Model, \
np.dnorpattern AS DN, \
pn.name AS ProcNodeName, pn.nodeid AS ProcNodeId \
FROM Device d \
LEFT JOIN typeclass AS tc ON d.tkclass = tc.enum \
LEFT JOIN typemodel AS tm ON d.tkmodel = tm.enum \
LEFT JOIN EndUser AS eu ON d.fkEndUser = eu.pkid \
LEFT JOIN DeviceNumPlanMap AS dnpm ON dnpm.fkdevice = d.pkid \
LEFT JOIN NumPlan AS np ON dnpm.fknumplan = np.pkid \
LEFT JOIN geolocation AS g ON g.pkid = d.fkgeolocation \
LEFT JOIN processnode AS pn ON pn.pkid = d.fkprocessnode \
What I am am finding is 'NULL' is the typical response for the field 'processnode' for a device that is registered to a give UCM Node. The only match that I do get is MTP or CONF or ANN type of device...but no phones...
I am looking for any feedback since the LEFT JOIN processnode is a simple foreign key, 'fkprocessnode' from the device table from the UCM data dictionary...

Hi
The reason why you are not getting information on UCM registration node for device is because this info is never stored in the informix.
Instead you need to query risdb on cucm to get the information. Use the following command and you can the registered node info for the device :
show risdb query phone
If you are running this query on a cluster with lots of phones, i will advice to run during minimal load since query is going to get you lots of information from CUCM.
Below is the sample output from my lab (2 CUCM-pub and sub and 2 phones):
Scenrio 1:
Both phones Registered to Pub
Publisher
admin:show risdb query phone
----------- Phone Information -----------
#TotalPhones, #TotalRegistered, #RegisteredSCCP, #RegisteredSIP, #UnRegistered, #Rejected, #PartiallyRegistered, StateId, #ExpUnreg
2, 2, 1, 1, 0, 0, 0, 7,0
DeviceName, Descr, Ipaddr, Ipv6addr, Ipv4Attr, Ipv6Attr, MACaddr, RegStatus, PhoneProtocol, DeviceModel, HTTPsupport, #regAttempts, prodId, username, seq#, RegStatusChg TimeStamp, IpAddrType, LoadId, ActiveLoadId, InactiveLoadId, ReqLoadId, DnldServer, DnldStatus, DnldFailReason, LastActTimeStamp, Perfmon Object
SEP00059A3C7A00, SEP00059A3C7A00, 10.65.49.186, , 3, 0, 00059A3C7A00, reg, SCCP, 30016, yes, 2, 30041, NoUserId, 1, 1427944494, 1, , CIPC-8-6-4-0, , , , 0, , 1427944494, 2
SEP001D4526E778, SEP001D4526E778, 10.88.85.231, , 0, 0, 001D4526E778, reg, SIP, 478, yes, 0, 365, NoUserId, 2, 1427472713, 1, CTS.1-10-10-13R-K9.P1, CTS_1.10.10(13)_P1, , , , 0, , 1427472713, 2
Total count 2
Subscriber
admin:show risdb query phone
----------- Phone Information -----------
#TotalPhones, #TotalRegistered, #RegisteredSCCP, #RegisteredSIP, #UnRegistered, #Rejected, #PartiallyRegistered, StateId, #ExpUnreg
0, 0, 0, 0, 0, 0, 0, 0,0
DeviceName, Descr, Ipaddr, Ipv6addr, Ipv4Attr, Ipv6Attr, MACaddr, RegStatus, PhoneProtocol, DeviceModel, HTTPsupport, #regAttempts, prodId, username, seq#, RegStatusChg TimeStamp, IpAddrType, LoadId, ActiveLoadId, InactiveLoadId, ReqLoadId, DnldServer, DnldStatus, DnldFailReason, LastActTimeStamp, Perfmon Object
Total count 0
Scenario 2
One phone moved from publisher to subscriber
Publisher
admin:show risdb query phone
----------- Phone Information -----------
#TotalPhones, #TotalRegistered, #RegisteredSCCP, #RegisteredSIP, #UnRegistered, #Rejected, #PartiallyRegistered, StateId, #ExpUnreg
2, 1, 0, 1, 1, 0, 0, 8,0
DeviceName, Descr, Ipaddr, Ipv6addr, Ipv4Attr, Ipv6Attr, MACaddr, RegStatus, PhoneProtocol, DeviceModel, HTTPsupport, #regAttempts, prodId, username, seq#, RegStatusChg TimeStamp, IpAddrType, LoadId, ActiveLoadId, InactiveLoadId, ReqLoadId, DnldServer, DnldStatus, DnldFailReason, LastActTimeStamp, Perfmon Object
SEP00059A3C7A00, SEP00059A3C7A00, 10.65.49.186, , 3, 0, 00059A3C7A00, unr, SCCP, 30016, yes, 2, 30041, NoUserId, 1, 1427945627, 1, , CIPC-8-6-4-0, , , , 0, , 1427945627, 2
SEP001D4526E778, SEP001D4526E778, 10.88.85.231, , 0, 0, 001D4526E778, reg, SIP, 478, yes, 0, 365, NoUserId, 2, 1427472713, 1, CTS.1-10-10-13R-K9.P1, CTS_1.10.10(13)_P1, , , , 0, , 1427472713, 2
Total count 2
Subscriber
admin:show risdb query phone
----------- Phone Information -----------
#TotalPhones, #TotalRegistered, #RegisteredSCCP, #RegisteredSIP, #UnRegistered, #Rejected, #PartiallyRegistered, StateId, #ExpUnreg
1, 1, 1, 0, 0, 0, 0, 3,0
DeviceName, Descr, Ipaddr, Ipv6addr, Ipv4Attr, Ipv6Attr, MACaddr, RegStatus, PhoneProtocol, DeviceModel, HTTPsupport, #regAttempts, prodId, username, seq#, RegStatusChg TimeStamp, IpAddrType, LoadId, ActiveLoadId, InactiveLoadId, ReqLoadId, DnldServer, DnldStatus, DnldFailReason, LastActTimeStamp, Perfmon Object
SEP00059A3C7A00, SEP00059A3C7A00, 10.65.49.186, , 3, 0, 00059A3C7A00, reg, SCCP, 30016, yes, 2, 30041, NoUserId, 1, 1427945662, 1, , CIPC-8-6-4-0, , , , 0, , 1427945662, 2
Total count 1
In scenario 2 , RegStatus of phone 1 shows as unr (unregistered) on pub.
You can use this as a filter to sort out the registered and un-registered phones on a given node
Hope this helps.
Regards
Aditya Gupta

Our Macbook air was lost or stolen shortly after initial setup / registration but device location was not turned on. Can MAc ID

Our Macbook air was lost or stolen shortly after initial setup / registration but device location was not turned on. Can MAc ID # be found through email linked during setup ?

The following has some recommendations from Apple of what to do if Find My Mac was not turned on before it was lost or stolen. The quote is from If your Mac is lost or stolen - Apple Support
Find My Mac is the only Apple service that can help track or locate a lost Mac. If you didn’t set up Find My Mac before your Mac was lost, or you can’t locate it, these steps might help you protect your data:
Change your Apple ID password to prevent anyone from accessing your iCloud data or using other services (such as iMessage or iTunes) from your Mac.
Change your passwords for other accounts you use with your Mac, including email, banking, and social sites like Facebook or Twitter.
Report your lost or stolen Mac to local law enforcement. They might request the serial number of your computer. You can find this information on the original box or receipt you received when you purchased your Mac, or on Apple's My Support Profile site if you registered your Mac.

Data not coming from DOE to Mobile After defining Rule for device attribute

Hi All,
I have created a DO and rule for it.In case of Bulk Rule for all definition when i triggere extract from Portal then all the data comes to outbound queue but when i define rule for Device attribute then no data comes to my Outboun queue.Here is the scenario what i am doing :
1. I have order header in my backend which has a field named "Work_Center" and this will be criteria field.
2. In CDS table i have all the records for all the work center.
3. Now in RMM under customized , i have added an attribute named "Work_center".
4. Now i defined a rule with Device attribute mapping and activated the rule.
5. Now on Portal i assigned this data object and in the device attribute tab i assigned the value(this value exist in CDS table for few orders) of a Work center to the attribute "Work_Center" .
6. Then i triggrere extract but its Outbound queue is empty, what could be the reason.
Is my approach is correct
Regards,
Abhishek

Hi Abhishek,
You can check one ore thing, after you have performed all the steps till step 5, i.e. just before triggering
extract. Check if the AT table for ur DO has entries based on the criteria specified by you...
1. In the workbench click on the Data Object, and then right click and select "View Metadata".
2. Select Distribution Model tab.
3. Now select your DO's Association table.
4. For the input field DEVICE ID specify your corresponing device id,and also for status field specify it
as "I" and execute
If there are any entries now in the AT table, and on triggering extract if they are not coming to the
outbound Q there is some EXTRACT Q blocked. And is there were no entries in the AT then the rule
specified is not the satifying.
Thanks,
Swarna
Now if you have entries w

Ivé just recived logic and I wonder: can I use the registration for logic on all my computers or is it limited to just one?

Ivé just recived logic and I wonder: can I use the registration for logic on all my computers or is it limited to just one?

You can install it on 2 Apple computers

How do i find the registration for quicktime pro ?

how do i find the registration for quicktime pro ?

It should be under the Quicktime Player 7 menu, right under 'preferences'.

HT201401 My bluetooth is no longer working in the car - it keeps 'searching' for devices

My bluetooth is no longer working in the car - it keeps 'searching' for devices. Anyone ever had this issue?
Thanks

Can you connect from your phone to another BT device, not the car? If you haven't ,I'd try a reset of the phone by holding the home and power button down. Next step would be to talk to your dealership and see if they have any ideas. Sometimes software can either get updated on iOS or on the vehicle and it can cause problems. Every dealership seems to have a go-to person that handles issues like this. Getting to know him or her well and getting their direct phone number will pay big dividends. A device restore might be necessary, but if it were me I'd talk to the dealership first.

Registrations for certain software are not being recognized by my Imac.

Registrations for software that require web based verifications are not being recognized by my iMac 27 2010 10.6.8
Included in the list of software that I have been using for some over a year now is FCE 4, Bias Peak, and Sibelius, and iRealb from the app store.
This is not a new issue although with the latest security update installed last week, the problem has been exacerbated.
I had the problem last year but found that if I shutdown (not just restarted) and then powered up again all my registrations would be recognized. Now my workaround no longer seems to work. I actually went for about 5 months with no problems and then occasionally I would have the shutdown/power up until last week.
I mirror the same software on my Macbook Pro 10.6.8 and have had no problems.
Thanks for any help.
Michael

I can add Kindle reader to the software list now. I used it last week and this week the cloud didn't recognize my computer.
Also on the iRealb app downloaded from the Apple app store I get a dialog that says the software was purchased on another computer (which it was, my laptop) and asks me to verify with my iTunes ID. I try to verify and it is unsuccessful, can not verify your computer.
MT

Hp LaserJet 1200 Generic Class: Waiting for device

I have 2 computers that I want to print to my hp Laserjet 1200 printer. We are using an iogear 4-port usb 2.0 sharing switch. One computer prints fine but the other always displays a message "Generic Class: Waiting for device." Help!

Both computers have the printer driver installed. The usb device does not have a driver to install. You just plug in the usb cords to each computer and the printer. You only install a driver if using a pc operating system.

HP LaserJet 5200 - Yet another "GenericClass: waiting for device" problem

I have an HP LaserJet 5200 that worked until today. I have changed nothing and replaced nothing and now I'm getting the ol' "GenericClass: waiting for device." It worked when I first went to 10.5.4, so that's not the issue. The connection obviously works because the computer recognizes the printer. I've deleted and reinstalled everything under the sun related to printing to no avail.
Any ideas? I'm hoping I don't have a $2000 paper weight.
Thanks in advance
Message was edited by: Wesley Johnson

Several Leopard users are reporting that HP printers no longer work with USB-parallel adapter cables. I don't know why.
The best solution is to put the printer on the network, either by buying the jetdirect card that fits that model (on eBay), or by buying a used parallel port print server.

Devices not detected - where is the drop down menu for device?

the latest 11.0.1 update doesn't have the dropdown menu for devices and if i click on FILE > DEVICES, nothing happens plus all the selections are greyed out!
can anyone explain?
thanks

Thanks, but the issue was that i had to restart my computer! iTunes has detected my devices now, but thanks!

I put ios7.1 to my ipad it was working not it is asking for activite for developer and allready registered to my developer for devices but now it does not actived

I put ios7.1 to my ipad it was working not it is asking for activite for developer and allready registered to my developer for devices but now it does not actived

If you are an authorized member of Apple's developer program, you have forums and resources through which you can address issues with seed versions of Apple's software. Posting here or in any public forum is a violation of your NDA with Apple. The developer forums can be found here:
https://developer.apple.com/devforums/
If you are not an authorized developer, then you have an illegal copy of the software.
Either way, we cannot help you with questions about unreleased Apple software in these forums.
Regards.

[SOLVED] dmraid "Timed out waiting for device" at boot

Created a bug report with solution proposal: https://bugs.archlinux.org/task/33166
I created a virtual machine to demonstrate the problem
https://docs.google.com/open?id=0B40Hp1 … WZUQ21xZk0
The root and the other mount points are all on one raid disk. Although the root mounts quickly, other mount points cause timeouts at boot time.
dmraid prints that all /dev/mapper/isw_* devices are created.
I think /dev/disk/by-uuid/* links are created too, but for some reason systemd doesn't see them.
After boot I can execute "mount -a" without errors.
here's my fstab:
tmpfs /tmp tmpfs nodev,nosuid 0 0
UUID=e89249d8-49a5-415b-8f9b-97de5cfbe82d / ext3 defaults
UUID=c37f8bdd-3d6c-495f-bf8a-5ef059e55254 swap swap defaults 0 0
UUID=91988343-dd89-43b9-8975-babb0b9510a2 /media/ARCHLINUXNEW ext4 nofail 0 1
UUID=62C813E9C813B9ED /media/distrpart ntfs-3g rw,nofail
UUID=E0A1-D623 /media/realboot vfat rw,codepage=866,iocharset=utf8,umask=002,noatime,nofail
# journalctl -b
Dec 15 00:25:24 localhost kernel: firewire_core 0000:05:03.0: created device fw0: GUID 0011d800017a5dd7, S400
Dec 15 00:26:50 localhost systemd[1]: Job dev-disk-by\x2duuid-E0A1\x2dD623.device/start timed out.
Dec 15 00:26:50 localhost systemd[1]: Timed out waiting for device dev-disk-by\x2duuid-E0A1\x2dD623.device.
Dec 15 00:26:50 localhost systemd[1]: Dependency failed for /media/realboot.
Dec 15 00:26:50 localhost systemd[1]: Job media-realboot.mount/start failed with result 'dependency'.
Dec 15 00:26:50 localhost systemd[1]: Job dev-disk-by\x2duuid-E0A1\x2dD623.device/start failed with result 'timeout'.
Dec 15 00:26:50 localhost systemd[1]: Job dev-disk-by\x2duuid-62C813E9C813B9ED.device/start timed out.
Dec 15 00:26:50 localhost systemd[1]: Timed out waiting for device dev-disk-by\x2duuid-62C813E9C813B9ED.device.
Dec 15 00:26:50 localhost systemd[1]: Dependency failed for /media/distrpart.
Dec 15 00:26:50 localhost systemd[1]: Job media-distrpart.mount/start failed with result 'dependency'.
Dec 15 00:26:50 localhost systemd[1]: Job dev-disk-by\x2duuid-62C813E9C813B9ED.device/start failed with result 'timeout'.
Dec 15 00:26:50 localhost systemd[1]: Job dev-disk-by\x2duuid-91988343\x2ddd89\x2d43b9\x2d8975\x2dbabb0b9510a2.device/start timed out.
Dec 15 00:26:50 localhost systemd[1]: Timed out waiting for device dev-disk-by\x2duuid-91988343\x2ddd89\x2d43b9\x2d8975\x2dbabb0b9510a2.device.
Dec 15 00:26:50 localhost systemd[1]: Dependency failed for /media/ARCHLINUXNEW.
Dec 15 00:26:50 localhost systemd[1]: Job media-ARCHLINUXNEW.mount/start failed with result 'dependency'.
Dec 15 00:26:50 localhost systemd[1]: Dependency failed for File System Check on /dev/disk/by-uuid/91988343-dd89-43b9-8975-babb0b9510a2.
Dec 15 00:26:50 localhost systemd[1]: Job systemd-fsck@dev-disk-by\x2duuid-91988343\x2ddd89\x2d43b9\x2d8975\x2dbabb0b9510a2.service/start failed with result 'dependency
Dec 15 00:26:50 localhost systemd[1]: Job dev-disk-by\x2duuid-91988343\x2ddd89\x2d43b9\x2d8975\x2dbabb0b9510a2.device/start failed with result 'timeout'.
Dec 15 00:26:50 localhost systemd[1]: Dependency failed for /dev/disk/by-uuid/c37f8bdd-3d6c-495f-bf8a-5ef059e55254.
Dec 15 00:26:50 localhost systemd[1]: Reached target Swap.
Note the 1.5 minute pause
# mount | grep /dev/mapper
/dev/mapper/isw_ebaifefjbf_Volume0p9 on / type ext3 (rw,relatime,stripe=64,data=ordered)
/dev/mapper/isw_ebaifefjbf_Volume0p1 on /media/realboot type vfat (rw,noatime,fmask=0002,dmask=0002,allow_utime=0020,codepage=cp866,iocharset=utf8,shortname=mixed,errors=remount-ro)
/dev/mapper/isw_ebaifefjbf_Volume0p8 on /media/ARCHLINUXNEW type ext4 (rw,relatime,stripe=64,data=ordered)
/dev/mapper/isw_ebaifefjbf_Volume0p5 on /media/distrpart type fuseblk (rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other,blksize=4096)
Last edited by leniviy (2012-12-22 16:06:25)

I've ran into exactly same problem lately, but finally solved it.
Setup: Intel Fake RAID, mirror, partitioned as:
/dev/mapper/isw_dfjeffgfaj_rootvol1 /boot
/dev/mapper/isw_dfjeffgfaj_rootvol2 /
/dev/mapper/isw_dfjeffgfaj_rootvol3 /home (dm-crypted)
In /etc/fstab i had following mountpoints:
# file /etc/fstab
/dev/mapper/isw_dfjeffgfaj_rootvolp2 / ext4 rw,relatime,data=ordered 0 1
/dev/mapper/isw_dfjeffgfaj_rootvolp1 /boot ext4 rw,relatime,data=ordered 0 2
and boot hung on waiting for /dev/mapper/isw_dfjeffgfaj_rootvolp1. Solution involves changing dev path to UUID:
# file /etc/fstab
/dev/mapper/isw_dfjeffgfaj_rootvolp2 / ext4 rw,relatime,data=ordered 0 1
UUID=44809529-11d9-4f53-9652-7b97ed077225 /boot ext4 rw,relatime,data=ordered 0 2
For some reason symlinks /dev/mapper/isw* are not present during systemd mount.

Inappropriate ioctl for device

Hello,
I have some zones set up in solaris 10. When i try to scp a file to any of the zones, i get the following error:
"shell-init: error retrieving current directory: getcwd: cannot access parent directories: Inappropriate ioctl for device"
1. /export/home is mounted using lofs in to the zone from the parent.
2. This does not happen when i scp something to the parent
3. This does not happen on an account which is local to the zone, whose default shell is bash
3. This does not happen on an NIS account whose default shell is ksh
4. This does happen on all NIS accounts who have a default shell of bash, even if there is nothing in their home directory (ie, no .bashrc).
5. There is no mention of tty in /etc/profile or /etc/.login
6. I have tried changing the default TERM to vt100 from xterm, it still happens
7. The error does not present itself upon a normal ssh login
8. the error [n]does[n] show up when i do something like `ssh myzone "id"` from another box or zone.
If i don't mount /export/home from the parent in to the zone, i do not get this error. There must be some problem with how i set this up maybe? Here's the zonecfg info:
zonepath: /export/zones/vwsuserz
autoboot: true
pool:
inherit-pkg-dir:
dir: /lib
inherit-pkg-dir:
dir: /platform
inherit-pkg-dir:
dir: /sbin
inherit-pkg-dir:
dir: /usr
fs:
dir: /export/home
special: /export/home
raw not specified
type: lofs
options: [rw,nodevices]
net:
address: 10.222.136.162
physical: bge0
I've been googling for a long time and no one seems to have found a resolution. Does anyone have insight in to this problem?
Message was edited by:
keegang
Message was edited by:
keegang

The problem maybe a permissions on your parent directory, I had a similar error:
root@elliot:~ # ls -ald ../
drwx-----x 9 root root 512 Feb 15 14:33 ../
jemurray@freiwald:~ $ scp hat.txt elliot.nts.wustl.edu:
shell-init: error retrieving current directory: getcwd: cannot access parent directories: Permission denied
hat.txt 100% |**********************************************************************************| 1428 00:00
root@elliot:~ # chmod 755 ../
root@elliot:~ # ls -ald ../
drwxr-xr-x 9 root root 512 Feb 15 14:33 ../
jemurray@freiwald:~ $ scp hat.txt elliot.nts.wustl.edu:
hat.txt 100% |**********************************************************************************| 1428 00:00
We used to try and have our main /export/home directory 701 permissions, but we received this error. Permissions 755 make the problem go away. Not the best answer, but for the users we have on our systems, it is not a big deal.

Registration for devices

Similar Messages

Maybe you are looking for