Registration number after upgrade

i upgraded to adobe pro 11  i am asked to pay another 19 dollars and register license.  when i go to license i need a number.  money being drafted yet i have no number  pop ups persistently continue

Hi Beverly,
If you have purchased an upgrade then you must have received a serial number.
Kindly use the same to activate the license. You need not pay anything extra.
Regards,
Rave

Similar Messages

  • Logic keeps asking for serial number after upgrade to 9.1.3

    I know this has been asked before, but I'm wondering if there is a solution other than erasing my hard drive etc. I had to do a re-install of my system 10.5.8 and I upgraded to 9.1.3 and now Logic keeps asking for serial number after every shut down (not if I only quit). any ideas?
    Thanks!

    Thanks for your response. I had already re-installed my OS because computer wouldn't boot up. I had downloaded Onyx and run it which I think was the start of my problems including the missing serial number - so it was looking for serial number even before my upgrade to 9.1.3. I could not find anything called a reg keyfile in either my user or startup disk /Library/Preferences/. When I put in my serial number, I can boot and quit as many times as I want until I shut down.
    Here are the 3 console messages that appear when I try to boot up and they are the same that come up after shutting down or on a launch which does NOT ask for serial number:
    1/4/11 11:31:35 AM Console[149] Can't open input server /Library/InputManagers/LCC Scroll Enhancer Loader
    1/4/11 11:31:52 AM Logic Pro[150] Can't open input server /Library/InputManagers/LCC Scroll Enhancer Loader
    1/4/11 11:31:52 AM [0x0-0x1b01b].com.apple.logic.pro[150] ECMemReserve: allocating in MainStage mode
    Any help is greatly appreciated!!!

  • ARD asking for Serial Number after Upgrade to OSX 10.9 and ARD 3.7?

    Hello All,
    I bought ARD 3.6.1 back in 2012 from MAC Store. Yesterday, I decided to upgrade to OSX Mavericks and the upgrade forced ARD to update to 3.7 from 3.6.1 and now ARD is asking for serial number...  Never had a Serial Number since I bought it from Mac Store. Anyone with same problem?
    Many Thanks in Advance!
    App Store Update says I have 3.7 already installed.

    Not sure how that would happen but you should be able to revert to the Mac App Store version with the following steps:
    1. Launch the App Store app
    2. Go to the Purchases secton and verify that Apple Remote Desktop is showing in your list
    3. Assuming it's in your list, delete Remote Desktop.app from /Applications
    4. Verify that Remote Desktop.app is not installed on any other mounted volumes using Spotlight
    5. If it is installed then either unmount those volumes or delete the app from those other locations
    6. Go back to the Purchases section of the App Store app
    7. If Apple Remote Desktop is shown as "Installed" then select "Reload Page" from the "Store" menu
    8. The entry for Apple Remote Desktop should now give you the option to "Install"
    9. Click "Install"
    After installation you should have the correct Mac App Store version that does not prompt for a serial number.

  • Serial number after upgrade

    Hi,
    I purchased Final Cut Express HD 3.5 a long time ago. Later I upgraded to Final Cut Express 4. I installed it without problem and without entering my serial number. Now I got a new motherboard for my Mac (because of a defect of the graphical processor). And after this, when I start Final Cut Express 4, I get a "Licensing" window: "Enter user information below" (Name, organization and serial number). I enter the serial number for my Final Cut Express HD 3.5, but when I click "OK", it says "Alert: The serial number you entered is not valid".
    How to fix this?
    Have a nice day,
    Michel

    There should be a separate serial number than came with the v4 upgrade.

  • Aperture request serial number after upgrading to Leopard.

    I have just upgrade to Leopard. Everything goes right except for the fact Aperture no longer open. It is requesting for my serial number. Never had to do this before. I am working with Aperture for at least a year now and made all my updates without having to re-enter the serial number. This happens only a few week after I throw out the empty box of Aperture not being aware I was keeping it probably because of that serial number! What can I do now.

    Welcome to the forum. As you've registered the software with Apple you might be able to ring them up and get your serial number.
    Ian
    P.S. NEVER throw away those little slips with the serial number on! Your computer could crash and the backup not work, Migration Assistant might fail to copy the serial number across to a newly-bought computer, you might want to sell the software etc. There are many circumstances that might require you to fill in the serial number again...

  • Access Original Serial Number after Upgrade

    Hi guys, in a bind here...
    My Mac Pro needs to be wiped and all my software will have to be installed.
    My problem is that our editor has been let go and he stole our FCS 2 and FCS 3 upgrade disks and packaging.
    I still have FCS 3 installed, so I can access one of the serial numbers in the "About Final Cut Pro" window, although I'm not sure if that would be the original serial or the upgrade.
    Is there a way for me to find both serials inside of Final Cut? That way I can just borrow someone else's disks and then use my serials to reinstall?
    Thanks...

    Touche. But I'm afraid you took my comments personally.
    Sure, we kept them under lock and key. However, we assumed that they were with all of our other software in our locked file cabinet when we let our editor go. Now, 2 months later, we've discovered that they aren't there. Mistakes happen, no need to rub it in.
    I assumed there would be an easy solution...
    For anyone who needs to know, Apple has sent a new serial number for us. However, they were going to charge me $100+ for replacement disks. I'll just use my friends' disks and my new serial number.
    Lesson learned!

  • IMessages stuck using iPhone 6 temporary number after upgrade

    Hi all,
    I've just updated from an iPhone 5 running iOS 8 to an iPhone 6.
    There was a 24 hour period when my Orange (UK) 3G contract ported over
    to my EE (UK) 4G contract, which requires a new SIM. In that time, I had
    a temporary number.
    Now, the problem is that iMessages appears to send texts from that
    number. My mobile number has ported back across (I can confirm this by
    doing a voice call) but when sending texts they appear to come from the
    temporary number.
    I have gone into the iMessage settings on my iPhone and selected my
    original phone number to start new conversations from, but I cannot
    remove the temporary number from the list.
    Even worse, the temporary number is ticked but greyed out in the "You
    can be reached at..." section so I can't deselect it from there either.
    How do I remove this random temporary number so that people who have my old number can see its me sending them texts?
    Thanks in advance for any help. And yes, I did try turning it off and on again!!!

    Try the following:
    Open Settings.
    Choose Phone.
    If your telephone number is incorrect, then correct it.
    Navigate to the previous section.
    Choose Messages.
    Disable and then reenable iMessage.

  • After upgrading to Firefox 8.0.1, now on at least one website I use, it limits the number of characters that I can type in a text box to 275, is there a way to fix this?

    After upgrading to Firefox 8.0.1, now on at least one website I use, it limits the number of characters that I can type in a text box to 275, is there a way to fix this?

    That may be part of the coding that the web page is using.
    *https://developer.mozilla.org/en/HTML/element/input

  • ORA-01722: invalid number (Error in Application after upgrade to 3.0)

    Dear All,
    After upgrading to 3.0 I am no longer able to login to my application. The error I am seeing is:
    ORA-01722: invalid number
         Error      Could not process show_hide_memory.show_hide_collection_output procedure !
    Please help me pin-point the issue and fixed it.
    This happens in some applications but in others it doesn't...
    Regards,
    Pawel.

    I believe I have found the source of the problem!
    This is coming from the sample application which was used for the show/hide of regions example.
    The code behind the above procedure is:
    CREATE OR REPLACE
    PACKAGE show_hide_memory AS
    PROCEDURE show_hide_collection;
    PROCEDURE show_hide_collection_output;
    END;
    CREATE OR REPLACE PACKAGE BODY show_hide_memory AS
    PROCEDURE show_hide_collection AS
    l_arr apex_application_global.vc_arr2;
    l_found boolean := FALSE;
    l_collection_name VARCHAR2(255) := 'SHOW_HIDE_COLLECTION';
    BEGIN
    IF(wwv_flow_collection.collection_exists(p_collection_name => l_collection_name) = FALSE) THEN
    htmldb_collection.create_or_truncate_collection(p_collection_name => l_collection_name);
    END IF;
    l_arr := apex_util.string_to_table(p_string => v('TEMPORARY_ITEM'), p_separator => ']');
    -- If the array member count of l_arr < 3, then the following code will raise an exception
    FOR c1 IN
    (SELECT seq_id
    FROM apex_collections
    WHERE collection_name = l_collection_name
    AND c001 = l_arr(1)
    AND c002 = l_arr(2)
    AND c003 = l_arr(3))
    LOOP
    -- It exists, so delete it
    apex_collection.delete_member(p_collection_name => l_collection_name, p_seq => c1.seq_id);
    l_found := TRUE;
    END LOOP;
    IF l_found = FALSE THEN
    apex_collection.add_member(p_collection_name => l_collection_name, p_c001 => l_arr(1), p_c002 => l_arr(2), p_c003 => l_arr(3));
    END IF;
    COMMIT;
    END show_hide_collection;
    PROCEDURE show_hide_collection_output AS
    BEGIN
    htp.prn('<script type="text/javascript">' || CHR(10));
    htp.prn('<!--' || CHR(10));
    htp.prn('window.onload=function(){' || CHR(10));
    FOR c1 IN
    (SELECT c003
    FROM apex_collections
    WHERE collection_name = 'SHOW_HIDE_COLLECTION'
    AND c001 = wwv_flow.g_flow_id
    AND c002 = wwv_flow.g_flow_step_id)
    LOOP
    htp.prn('htmldb_ToggleWithImage(''' || c1.c003 || 'img'',''' || c1.c003 || 'body'');' || CHR(10));
    END LOOP;
    htp.prn('}' || CHR(10));
    htp.prn('//-->' || CHR(10));
    htp.prn('</script>' || CHR(10));
    END show_hide_collection_output;
    END;
    I guess now I have to find the bug in the above code !

  • I UPGRADED TO WIN 8, CAN'T FIND MY ELEMENTS 8 DISC OR REGISTRATION NUMBER. CAN YOU HELP PLEASE?

    UPGRADED TO WIN8, CANT FIND ELEMENTS 8 DISC OR REGISTRATION NUMBER. CAN YOU HELP PLEASE?

    if you follow all 7 steps you can dl a trial here:  http://prodesigntools.com/direct-download-links-for-lightroom-3-and-photoshop-elements-8.h tml
    and activate with your serial.
    if you have a problem dl'g, you didn't follow all 7 steps.

  • Serial Number Prob after upgrading Dreamweaver 8.0 to Studio 8

    I've just upgraded my Dreamweaver 8.0 to Studio 8.0 to get
    full versions of Flash and Fireworks. When I try and activate my
    Flash (or Fireworks) it asks for an Upgrade serial number after I
    put in the new serial number supplied for all the Studio 8
    products. The only serial number I have is the Dreamweaver 8.0 one
    which is what I upgraded from and putting this in doesnt help.
    Where am I going wrong?

    I've reported it to Customer Support but because of the
    Easter holiday I doubt I'll get a reply for a few days. I really
    need access to Flash now and would appreciate any advice anyone
    has.

  • P780 signal issue after upgrading build number

    Recently i had upgraded build number P780_ROW_8G_S227_141121 after upgradation both sim card showing no sim signal on handset 
    how to solve this problem please suggest .even factory restore password not accepting .
    Regards
    Wasi

    I think you confuse standalone dbconsole with centralized gridcontrol. There's only ONE command to start database control: emctl start dbconsole. This command will start the integrated agent,too. No need to start the agent separately.
    Werner

  • I have lost large number of files after upgrading to macOS Yosemite. Any help to restore them?

    I have lost a large number of files after upgrading to macOS Yosemite!  Any help on how to restore the files would be much appreciated.

    Iimport them from your backup you made before choosing to upgrade to Yosemite.
    Cheers
    Pete

  • CAnnot upgrade serial number after download. 'This serial number is not for a qualifying product'. Trying to upgrade from ACS 5.5 Design Premium to ACS 6 Design Standard

    Cannot upgrade serial number after download. 'This serial number is not for a qualifying product'. Trying to upgrade from ACS 5.5 Design Premium to ACS 6 Design Standard

    start the installation of design premium cs5.5 just to make sure you're using the correct serial number.  once your serial number is accepted you'll see a screen giving you the option to install none, some or all of the cs5.5 programs.  at that point you can quit and not install anything having verified your cs5.5 serial number if you want nothing cs5.5 on your computer.
    on the other hand, if your cs5.5 serial number is not accepted, you'll pinpoint the problem.
    or, if your cs5.5 number is accepted, you could install a cs5.5 program and then install cs6.  it should recognize you have a cs5.5 program installed and NOT prompt you for you cs5.5 serial number allowing you to continue with your cs6 installation.

  • After upgrading to Belle, not able to view number ...

    I recently upgraded my Nokia E6-00 to Belle OS. After upgrading, i am not able to view number of characters remaining while composing text msg.
    While composing a text msg, we see number of word characters remaing to complete the first part of msg. If that it is completed then second part starts and so on.
    For eg., when we open the compose msg window, we see 160(1). Once we start typing-we see the no. or characters remaining - like 130(1), 98(1), and so on.
    But after upgrading to Belle, i am not able to view number of characters remaining while composing text msg.
    Can anyone help on this?

    The problem is not with duplicate contacts. It is with Nokia Suite. It installa a piece of software on the phone after which this link breaks.
    How do I know this? I recently tried the leaked belle version by flashing my phone. After which everything was working fine. That is numbers showing up in call log and with messages.
    I recently put the official release using Nokia Suite and the problem is back. Hope Nokia figures this out and fixes it.

Maybe you are looking for

  • Is the ipad 4g locked by the operator?

    I want to buy an ipad 4th gen whit cellular in the United States to bring it to bolivia because i live there, Is the ipad locked by the carrier?

  • Linking to new page from BLOB image in report

    Hi Guys, I have added an image to my report using the number/Date format field IMAGE:CITIES:CTY_PHOTO:CTY_NR::::::inline:Download. This works great! :) I know want the user to click on the image and go to the next page, setting the city code that was

  • Using an unchecked exception to alter flow control inside a class

    Best-practice question: Is it wrong to use an unchecked exception in an if-like manner? For example, instead of using: if (condition) { -----------a lot of code----------------- } else { ----------some more code-------------- Is it wrong to do it lik

  • Closing programs

    How can I close programs that I have used? The double-klick home button does not work any more as with IOS6.

  • Multi - cam editing

    When choosing camera angles in the multi-camera monitor you have to hit play first. Some instructions tell you to hit the record button instead. what is the difference?