Registration of PI components in SLD

PI 7.0 server was setup successfully on wid 2003/oracle, after all the post configuration steps. Am not able to see the PI structures under technical systems -> exchange infrastructure in SLD. I can only see Adapter ENGINE, Integration server and Doamin, but not IR, ID, RWB.  .
SLD is running on the same PI server.Exchange profile and all the related PI users and passwords are fine
Have gone almost all the related threads in the forum, implemented teh note 1117249 but no luck.
Requesting to experts to give me a roadmap to troubleshooting furhter.
Thanks,
Durga

Hi Durga,
I am not sure once the PI7.1 system will be ready by BASIS Team (with EHP1) with the required specificaiton ,what steps need to follow to configure the SLD components like SWCV,PRODUCTS etc?
And who should perform the registration of PI component and if client doesnt know about the specification needed to PI components then who should provide this?
Will it be responsibility of PI BASIS adminitstrator or Infrastrutre Management Guy?
Thanks for help!!
Pushkar

Similar Messages

  • Error while trying to import Software components from SLD.

    Hi Gurus,
    Need Help.
    When we are trying to import Software components from SLD we are getting following error. Could not read list of software component versions from SLD. In Description  i am getting following two points.
    1. Could not read list of software component versions from SLD (COULD_NOT_READ_SWCV)
    2. User credentials are invalid or user is denied access
    We have tried following
    1. LCRSAPRFC and SAPSLDAPI are working fine.
    2  SLDAPICUST is ok
    3. In nwa connections are available for LCRSAPRFC and SAPSLDAPI.
    Request you to let us know how to resolve this issue.
    Thanks in advance.

    Hello ,
    Can you check below roles assigned to the user id?
    SAP_SLD_CONFIGURATOR
    SAP_SLD_DEVELOPER
    SAP_SLD_ORGANIZER
    Thanks

  • SLD missing registration of PI components after PI installation

    Hi experts,
              I just started PI development and our BASIS team installed PI 7.0 on QAS box and finished post installation steps. We have SLD running on seperate server from PI and when I go into SLD-->technical systems it is not showing "adpater engine" and "integration repository" in the list! I did research on SDN and tried SAP note 1117249 but no luck. I am not sure what else I need to do for troubleshooting and any suggestions from you would be a great help.
    Thanks.
    Mithun

    HI Mithun,
    It seems like Post configuration was not done properly... Check with your Basis person.. If you wanna check means.
    Search for post configuration articles in SDN.
    [http://www.sdn.sap.com/irj/sdn/index?rid=/library/uuid/30ad1393-9d5c-2c10-d1a1-adb563819e5f]
    Lot of things also available. Check it out.
    From that prepare a check list and test your system whether configuration was done properly or not..
    If not, then contact your basis or PI senior who did post configuration work to solve the particular issue..
    Its good for you to read docs and prepare checklist.. Useful for you in future..

  • Registration of TREX in the sld not working

    HI all,
    I need configuration the TREX for  complete instalation of xPD, but the registration on sld of trex no working, However However, I follow in the footsteps of the note 998708 and not working
    Any suggestions to solve the problem?
    Thank you

    It's the multicolored arrow in the bottom right. It has worked before today with no problems. I don't know why it just suddenly stopped working.

  • Problems creating software components in SLD

    Hi,
    I am using <b>NW2004s SP06</b>.
    While configuring NWDI, I was defining Product and Software components in the SLD.
    1) I am unable to create products for SAP Systems in the catalog. Whenever I select a new product the message always says new product for non-SAP system.
    2) <b>I am unable to create software components for products for non SAP systems. Whenever I try adding new software components I get an error on the production state</b>
    <b>Value not allowed by VALUEMAP for property SAP_SoftwareComponent.ProductionState:Released</b>
    This is the same error when I choose all the listed Production states: (Eg: Planned, Developed etc)
    Please help

    Forgot to add..
    Application Server-Java (J2EE engine), DI, SLD etc are all on a single machine..

  • XI products and software components in SLD

    We are starting to implement XI in order to exchange messages between R/3 systems.
    Is it better to create a custom software component within the standard SAP R/3 Product (in the SLD), or do you suggest to create also a custom product (even if the systems involved are SAP systems) ?
    Which are advantages and disadvantages ?
    Thanks in advance.

    I am not sure if the question is answered. I am trying to see what is correct. SAP appear to say build under the specific Product supplied. Or else, what is that used for ?
    I am not a seasoned XI developer by far, however, upon reading XI books and documentation, i see that S/W components are attached to Products, and the Products are Imported into the Intergration Builder. I have also seen, and been told, that it is common practice to create a Product that reflects the Project, and then attach the S/W components under that, for which XI would be interfacing. For example, if I were working on a new project, say, "myProj" I would create a product called "myProd", then attach the S/W components involved, say, CRM under that. When the Product gets imported into the Intergration Builder, I continue my developments under a new namespace, that is under the Product "myProj".
    Is this right?
    In reality, "myProj" is not a Product, it is a project.
    I hope this is clear
    thanks
    Glen

  • Unable to load software components from SLD

    Does anybody know why I cannot import my software component into the Integration Repository? The IR displays the software components that are in the SLD but when I click on the software component that I want to import it gives an error message "No authorisation to import". Does anybody know exactly what role is required to be added to my userid? Many thanks.
    Warren

    hi warren,
    You dont have suitable SLD rights for importing Software components
    check this link for authorizations
    http://www.erpgenie.com/sap/netweaver/xi/xiauthorizations.htm
    i think u might require SAP_SLD_ADMINISTRATOR roles for your user
    regards
    Ramesh P
    Message was edited by:
            Ramesh P

  • Cannot construct URL for runtime check using entries in SLD

    Hi,
    we are using high availability for PI 7.1 and are facing to the problem to construct the url for Communication channel monitoring etcv. in rwb.
    In the exchange profile it looks good. Is there another place to check parameters for sld?
    Thanks in advance
    Frank
    Message: Cannot construct URL for runtime check using entries in SLD for component af.rbi.s3p1028; correct the entries in SLD
    Stacktrace:
    com.sap.aii.rwb.exceptions.OperationFailedException: Cannot construct URL for runtime check using entries in SLD for component af.rbi.s3p1028; correct the entries in SLD
    at com.sap.aii.rwb.core.XIJavaRTCComponent.getConnector(XIJavaRTCComponent.java:211)
    at com.sap.aii.rwb.core.XIRTCComponent.ping(XIRTCComponent.java:209)
    at com.sap.aii.rwb.web.componentmonitoring.model.CompTestModel.doPing(CompTestModel.java:623)
    at com.sap.aii.rwb.web.componentmonitoring.viewcontroller.CmDynPage.doPing(CmDynPage.java:428)
    at com.sap.aii.rwb.web.componentmonitoring.viewcontroller.CmDynPage.updateTests(CmDynPage.java:528)
    at com.sap.aii.rwb.web.componentmonitoring.viewcontroller.CmDynPage.selectNode(CmDynPage.java:555)
    at com.sap.aii.rwb.web.componentmonitoring.viewcontroller.CmDynPage.process_treeClick(CmDynPage.java:484)

    Hello
    A combination of the notes below should resolve this error:
    #764176 Error in XI due to inconsistent SLD contents                
    #1117249 Incomplete Registration of PI components in SLD            
    #1334053 No automatic PI 7.10 SLD Registration                      
    #1278563 Specification of message server host in Exchange Profile   
    Regards
    Mark

  • Unable to find associated SLD for specified class(SAP_XIIntegration Directory)

    Hi All,
    We have installed PI 7.4  dual stack on windows platform. All Post Installation activities were completed succesfully. I am able to succesfully execute transactions: SLDCHECK, SXMB_ADM (check) etc.
    All RFC connections are also configured properly. SXI_CACHE working fine.
    But when I tried to create a communication channel it gives me following warning message:
    " Unable to find associated SLD element for specified class (source element: SAP_XIIntegrationDirectory "., CreationClassName,SAP_XIIntegrationDirectory,string, Name, directory.sxi.ict-vxi-65,string)target element class: SAP_XIIntegrationServer).
    Please suggest what needs to be done to solve this issue.
    Thanks
    Pawan

    Hi Pawan,
    SAP note #764176  should be applied. Before you do that, apply note #1117249 Incomplete Registration of PI components in SLD.
    Hopefully this will resolve the error.
    Regards,
    Naveen

  • PI 7.11 - Configuration: Adapter Engines Not found

    Hi,
    We have a PI 7.11 System that is connected to a central SLD. There are also two PI 7.0 systems connected to this SLD. If i open a communicationChannel i get following message:
    Adapter Engines Not foundNo SLD elements of type SAP_XIAdapterFramework found
    If i look in the SLD Technical Systems (Exchange Infrastructure), i see the three PI systems but only the Adapter Engines of the two PI 7.0 systems.
    How can i check if the adapter engine is up and running and if it has correctly been registered by my SLD. Are there any documentation according this configuration?
    Thanks in advance

    It seems adapter engine is not registered properly. For more details, please refer to the following sap notes:
    1. [Note 764176 - Error in XI due to inconsistent SLD contents|https://service.sap.com/sap/support/notes/764176]
    2. [Note 1117249 - Incomplete Registration of PI components in SLD|https://service.sap.com/sap/support/notes/1117249]
    3. [Note 1292803 - Configuration Wizard: PI SLD Self Registration|https://service.sap.com/sap/support/notes/1292803] .
    Regards,
    Sunil Chandra

  • No access to system landscape at present

    Hi
    I am trying to establish connectivity between ECC and PI. I am in SXMB_ADM of ECC and under Global Configuration Data, I put the role of business system as Application System. Now when I click on the Systel Landscape, I am getting an error " No access to system landscape at present". How should I solve this?
    What do I enter next to corresponding Integ server ?
    Regards

    Hi,
    Check in SLDCHECK, from R/3 side, if everyhting is ok.
    You may want to check:
    #1143810 - Troubleshooting SLDCHECK - Releases 71X
    Second point, check note below to about the components in SLD, if they are correctly registered.
    #1334053 - No automatic PI 7.10 SLD Registration
    And take into account the following notes mentioned in the note above:
    #1117249 - Incomplete Registration of PI components in SLD
    #764176 - Error in XI due to inconsistent SLD contents
    Last recommendation, open the Exchange Profile and change all parameters that ends in *.name to FQDN, and don't forget to restart the system to activate the changes.
    For more information about the FQHN, check the notes below:
    #773830 - FQHN determination in ICM
    #654982 - URL requirements due to Internet standards
    Also ensure to apply the FQHN as per instructions on the note below:
    #804124 - HTTP communication with XI Adapter Engine fails
    And check for the parameter 'com.sap.aii.connect.integrationserver.sld.name' from note:
    #1278563 - Specification of message server host in Exchange Profile
    Regards,
    Caio Cagnani

  • "Non-Central Adapter Engines" in RWB

    Hi.
    We install XI system and we changed host name according to notes 757692.
    After then, We found one problem in RWB.
    When we run Component Monitor in RWB, Adapter engine is in "Non-Central Adapter Engines".
    Why Adapter engine is in "Non-Central Adapter Engines" node ?
    Any ideas ?
    Regards, Arnold.

    Hello Sonali
    This is most likely caused by errors registering the XI components in the SLD. Apply the notes below:
    #764176 Error in XI due to inconsistent SLD contents
    #1117249 Incomplete Registration of PI components in SLD
    #1334053 No automatic PI 7.10 SLD Registration
    Also search the forum for similar issues registering the adapter engine in the SLD components.
    Regards
    Mark

  • Non-central adapter engine entry is shown under development rwb

    Hi All,
    Recently we had a sand box which is a sytem copy of our development server, and everything works fine now.
    I have observed a strange issue here is, in the developement rwb under the Non-Central Adapter engines I see a entry as "Adapter Engine T49 (sand box host name)" the SID seen here is a sand box SID, and till today we never installed any non-central adapter engine either on dev or sand box, I am suprised to see this entry, can some one
    please help me to understand why is this sand box entry is shown under development rwb and where can I set this or where how can I delete this entry.
    Thanking you in advance..
    Regards
    Sonali

    Hello Sonali
    This is most likely caused by errors registering the XI components in the SLD. Apply the notes below:
    #764176 Error in XI due to inconsistent SLD contents
    #1117249 Incomplete Registration of PI components in SLD
    #1334053 No automatic PI 7.10 SLD Registration
    Also search the forum for similar issues registering the adapter engine in the SLD components.
    Regards
    Mark

  • Unable to create Business System with role Integration Server

    hi Experts,
    we are unable to create a BS with role of integration server, its throwing error with internal server 500.
    please advise. we do not have any issues while creating TS with role of WEBASABAP.
    thanks and regards,
    Kesava
    Edited by: Prateek Raj Srivastava on Jan 23, 2012 12:13 AM

    Hi Kesava,
    what is the purpose of creating a business system of type IS? This is automatically done in the post installation by CTC templates. So if the post installation is successfully executed, this should already be there. And if not you should check if the post installation was properly executed and if there where problems analyse why they occured.
    The creation of the BS is just one part of the game, so I would highly recommend to execute the hole post configuration via template or follow the help.sap.com and execute it step by step manually in the described order. Otherwise i guess this will not work.
    If there where just problems with SLD - please also have a look at SA Note 1117249 - Incomplete Registration of PI components in SLD
    best regards,
    Markus

  • Access to object list of type "BusinessSystem" using the InternalEOAService BusinessSystemAccessor failed

    Hi All,
    We are facing an issue in PI configuration when, we are unable to view business systems in the Integration Builder.
    ERROR : Access to object list of type "BusinessSystem" using the InternalEOAService BusinessSystemAccessor failed
    Our Landscape is as follows:
    PI : Based on NW7.4
    Connected to Central SLD on Solman 7.1
    OS : Windows 2008
    DB : MSSQL 2008
    We checked OSS note 1117249 - Incomplete Registration of PI components in SLD
    The problem seems to be with incomplete registration of PI components on the central SLD.
    In the Central SLD which we have configured, under the Process Integration tab we are unable to see entries for Integration Server, Adapter Engine, Directory, Repository and Runtime Workbench (RWB).
    Can you please help me with registering these components on the Central SLD so that these are visible during the PI configuration.
    Also, any idea if this issue is related to the different versions of PI and Central SLD system.
    Regards,
    Nilesh

    Hi Nilesh,
    Please check SAP Note 764176 - Manual correction of XI content in SLD.
    also check the below discussion
    Problem to register Intergration Server in SLD
    regards,
    Harish

Maybe you are looking for