Registration of VisualStudio after test period

Hello,
I have installed Visual Studio 2013 Professional and ran it as trial version.
So I forgot to type in the product key in these 30 days of trial.
Now Visual Studio is inaccessible and I am not able to click on the Help menu for registrating my product.
How to register my product with my product key without reinstalling Visual Studio?
Thanks for your help...

Hi,
Now, I do not have environment can test your problem. You say you canno open visual studio, ls there any message occurs when you open VS or you can share a screen shot when you open VS. Or you can try the Pvdg42‘s advice.
Best Wishes!
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place. <br/> Click <a
href="http://support.microsoft.com/common/survey.aspx?showpage=1&scid=sw%3Ben%3B3559&theme=tech"> HERE</a> to participate the survey.

Similar Messages

I have purchased Adobe Acrobat XI Pro. I have a serial number (removed by host) I purchased this product after the free test period had expired. Now I cannot enter the serial number into the website because it says that the product is not

I have purchased Adobe Acrobat XI Pro. I purchased it after the free test period had expired. In the drop down menue on the website XI Pro is not listed so I cannot enter the serial number [removed by host]. So I cannot use the program. John Steele. [personal information removed by host] Thank you

@Bill, I removed your post, since its subject now contained the serial number which I could not remove.
Bill’s original reply: I cannot edit your post. Please remove the S/N ASAP. You should never post S/Ns.
I will add to Bill’s reply and add that you should not post your phone numbers or other personal information on the internet.

Can't send im to lync mobile client after a period of chating

Thanks for your help first.
I'm setting Lync 2013 server, all internal lan function are working fine, except mobile client.
I've setup edge, reverse proxy (using IIS), FE, BE server.
For IM between between desktop lync client, it is working fine.
For IM between mobile lync client and mobile client with desktop lync cleint, I found the following issue:
- between mobile lync client and lync desktop client: The IM function is working sent between both party, no matter it is initial send from mobile or desktop client, but after a random period of time, may be 5 mins or 7 mins or 10 mins, the desktop client
will not able to send IM to the mobile client but the mobile client still able to send IM to desktop client.
- for between lync mobile client
the issue as above.
- between desktop lync client
no such issue found
I've trouble shoot this issue a lot but still can't the root cause?
Do you have any idea?
Many thanks for your help?
I know that when I testing using my mobile phone, my 3G network provider will continuous change my mobile ip address after a period time, does this behaviour will affect Lync server to find the mobile device?
are there any method will Lync server know what the mobile client status and ip address that let Lync server can find the mobile device effectively?
Patrick

I know that when I testing using my mobile phone, my 3G network provider will continuous change my mobile ip address after a period time, does this behaviour will affect Lync server to find the mobile device?
Hi,
Would you please tell us which edition of mobile did you use (Android, IOS or Windows Phone)?
As IPhone and Windows Phone need push notification function but Android Phone doesn’t need.
If possible, you can test with two Android Phone to check if the issue happen with push notification function.
From your description above, it seems that you use 3G network on mobile to connect Lync mobile client. Please check if the issue cause by IP address of mobile, you can change network to a WIFI to have a test.
Also, please double check if the needed ports open as Edwin provided above.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Ovi Maps work, then hang after a period of time

Hi,
When I use Ovi maps for navigation, I am able to set up my route, but then after a period of say 10 or 15 minutes, the application hangs and the screen freezes on the last know location.
I then have to exit out of the app, either by resetting the phone or sometimes just exiting.
I am then able to set up my route, where again after 10 mins or so it freezes
I have the latest firmware that is available in the phone, 21.0.004
The version of maps I am using is V3.04
I have performed several full factory / system resets, ie where I setup the country and time
I have no third party apps installed
I do also notice that quite often the email app does not always automatically push emails to me device, so I again have to turn it off and then back on for it to pick up my emails.
So I think in summary my device keeps half hanging, if that is possible
Anyone have any ideas what I can do before taking the device to my local Nokia service centre?
Thanks.
Solved!
Go to Solution.

ok, I now have a fix,
Not that anyone was able to assist, but it may help some one in the future.
I spoke to T-mobile and explained that Ovi maps works when the phone network connection is switched off, but hangs after about 10mins, when the network connection is switched on.
The guy from T-Mobile then went on to say that there are a choice of two configurations that can be applied to my account, that control picture messaging (Yes I did say picture messaging) He went on to say that he would swap me to the alternative method for picture messaging.
I assume that picture messaging just controls the down and upload of data, so impacts the data throughput.
Anyway, he changed my setting on the account, and to my amazement when I went and tested out on the road Ovi maps no longer hung, and now works very well!
My biggest shock was that T-Mobile sorted this all out for me in 10 mins! althought it has taken me many months of testing and trying different things
Cheers

Question about the Before/After/Test metadata tags

i think that i have read all of the appropriate sections on the wiki but i am a little unclear on how/when i need to add extra info to the Before/After/Test metadata tags.
thus far, i have not done any unit tests that require a component to be added to the display list. i was reading the section on how to do that and i see that all of the above mentioned tags have extra info:
[Before( async, ui )], [After( async, ui )] and [Test( async, ui )]
what do those do and when/why do i need to use them?
thanks
additionally, i am trying to run this simple example derived from what's on the wiki and it always times out.
package HM.FO.User {
import mx.controls.Button;
import mx.events.FlexEvent;
import org.flexunit.Assert;
import org.flexunit.async.Async;
import org.fluint.uiImpersonation.UIImpersonator;
public class UserWindowPresenterTest {
//protected var window:UserWindow;
protected var button:Button;
[Before( async, ui )] public function setUp():void {
//this.window = new UserWindow();
this.button = new Button();
//Async.proceedOnEvent( this, this.window, FlexEvent.CREATION_COMPLETE, 20000 );
Async.proceedOnEvent( this, this.button, FlexEvent.CREATION_COMPLETE, 20000 );
//UIImpersonator.addChild( this.window );
UIImpersonator.addChild( this.button );
[Before( async, ui )] public function tearDown():void {
//UIImpersonator.removeChild( this.window );
//this.window = null;
UIImpersonator.removeChild( this.button );
this.button = null;
[Test( async, ui )] public function on_user_saved_clears_password_fields():void {
// this.window.pass_txt.text = "foo";
// this.window.pass_confirm_text.text = "bar";
// var presenter:UserWindowPresenter = this.window.presenter as UserWindowPresenter;
// presenter.on_user_saved( null );
// Assert.assertNull( this.window.pass_txt.text );
// Assert.assertNull( this.window.pass_confirm_text.text );
Assert.assertTrue( true );

Okay, so the async modified is used to indicate that the asynchronous statement will be used.
There is a bit of overhead adding async to tests, so, we don't actually instantiate the code that handles Async unless the async attribute is in the Before, After or Test. If you don't place the async in these tags [Test(async)] and attempt to use the async code. Async.whatever... you will get an error.
Regarding the ui, attribute, the same concept was intended to apply for ui elements... in other words we wouldn't build the necessary infrastructure.. that is an optimization and right now is not in play. so you will not see different behavior with or without the ui.
If I copy your code directly from below and paste it in my environment it passes.
Mike

Does anyone know of an iPad app that can lock the iPad after a period of months (i.e., 6 months)?

Does anyone know of an iPad app that can lock the iPad after a period of months (i.e., 6 months)? I am looking to give ipads to contestant participants and need a way to automatically lock the device once the set duration (measured in days, weeks, months or years) is complete. Does anyone know of an iPad app that locks the device after a period longer than 24 hours (ike most parental control apps)??
Thanks for any help!!

It's called "SelfControl". It can be a little hard to learn to use but it's worth the effort.

Windows 7 Desktop goes Black after a period of inactivity and the user accesses their machine again

Hi There,
Wonder if someone can offer some help to an unusual problem?
Users have Windows 7 machines which all have a desktop background theme...Blue with a company Logo.
User will go for lunch and leave their position, after a period of time screen saver and/or powersaver kicks in...all normal at this point.
After an hour they come back to their machine and they move the mouse/tap a key and bring the machine back to life (excuse my terminology :) ) and the desktop has gone from the default theme to a black desktop...Icons/Applications will behave fine.
The temporary workaround is:
1. Log off and on windows to restore the desktop back to normal.
or...
2. I do a restart of the service "Desktop window Manager Session Manager" which puts the desktop back to normal as well.
Has anyone seen this and worked a way how to do a permanent fix....have struggled on Google as all answers i find are around screen savers which IS NOT the problem.
Cheers,
Steve

Hi Brenton,
First of all thanks for your quick response.
I forgot to mention these are machines we maintain on a customer site and I am planning a visit there soon so will be looking at some of the options you mention and then post a fuller report back for you.
In the meantime...
Re 1 we may actually be able to consider not going to "sleep" as this is a 24/7 operation environment so would not be a big deal to do that so may try that on my site visit.
Re 2 we do have a master build IF we need to re-build/re-image...its a fairly locked down completed environment so new machines/rebuilds wont happen often. Just for info we re-did our build from scratch very carefully.
On site going to check the Firmware updates as you quite rightfully mention could be out-of-date and benefit from an update. We last updated them about October/November last Lear.
I have just remembered that sometimes the users resolve the issue by using the mouse and dragging an empty box around the screen and this restores the desktop colour etc...very strange one!!
Cheers,
Steve

How to auto capitalize after a period in text field

Is there a way to make a text field auto capitalize after a period if the user has forgotten. I am currently using LiveCycle Designer ES4

Try putting the following in the exit event of your text field:
this.rawValue=this.rawValue.replace(/(^\w{1}|\.\s*\w{1})/gi, function(a){return a.toUpperCase();});
Kyle

In Photoshop CS6, Save for Web strips out my filename after a period "." character

I have a file named label-1.5oz.psd. In Photoshop CS6 when I use "Save for Web" to save it as a JPG, it only wants to save a part of the filename: label-1.jpg
I strips out everything after the period "." character. I know it's incorrectly thinking that's a file extension.
Any ideas how I can fix this? Any settings I should tweak? I'd really love for it to save the full filename without requiring me to retype the last part every time.
Thanks in advance for any help!

Oh if only it were that easy... Unfortunately, they have to be cropped and resized, converting over from a print catalog where much of that work was originally done in InDesign, and now have to convert each individual image to make the web site look like the catalog... but thanks for the suggestion, have already tried to automate what I could.. But much of this is going to be hands on... getting my familiar quick keys to function correctly would help greatly.

A connection attempt failed because the connected party did not properly respond after a period of time

Prior to the Increase Capacity for Outbound Network Calls update, my Azure websites running in
Standard mode experienced occasional connection attempt failed errors. Since this update the errors stopped but starting on 12/30/14, these errors started up again on both
South Central and East regions:
"A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond [IP]:80"
It occurs when attempting to consume an external web service over HTTP. This issue is not reproducible on our local environments nor did it occur with our previous shared hosting provider.
On Azure, the same web service call can result in this error or will return a response successfully.
There doesn't appear to be any pattern as to why the same call would work one time but not another.
How can this be resolved again? Any feedback is appreciated. Thanks.

Hi,
Please have a look at this article:
http://blogs.msdn.com/b/narahari/archive/2011/12/21/azure-a-connection-attempt-failed-because-the-connected-party-did-not-properly-respond-after-a-period-of-time-or-established-connection-failed-because-connected-host-has-failed-to-respond-x-x-x-x-x-quot.aspx,
it gives us several ways to solve this issue, hope this helps.
Best Regards,
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Mail stops receiving messages after a period of time

Every since installing Mavericks my Mail app stops receiving messages after a period of time. I know because I get the email on my phone, but I try to grab them in Mail and nothing. If I restart Mail then they come through.
I'm using Gmail as my email provider. Is anyone else suffering with this? Is there a work around?

Workaround or not, this is an annoyance, and that's a nice way of putting it. Coming from Mountain Lion, when Mail was working flawlessly, having to deal with this issue is just plain ridiculous. What happened to the Mail application? I don't understand how Apple could screw this up to badly.
Every time I restart or reset the connection to the servers, the Mail app is downloading thousands of messages (I can see the display on the bottom-left). I have no idea what it's doing or why, for that matter. If Apple doesn't fix this soon, I will seriously be forced to look for an alternative, which saddens me greatly. I really like Mail, but if it cannot reliably get my mail simply because I've left it open too long, or hidden it behind another window, I will stop using it.
What's worse is that I've had similar issues with other applications like iPhoto and iTunes. Whatever is happening to Mail is probably not just application-specific. It's probably OS-specific. I hope Apple is working on it and that we will see a major update to Mavericks soon. All I know is that, right now, I'm seriously regretting upgrading to Mavericks.

Why does fix capitalization work when there is only one space after the period in pages 09?

why does fix capitalization work when there is only one space after the period in pages 09? For example: "Turn on 3rd St. After the traffic light." There is only one space after the period in "St." shouldn't it only auto correct after TWO spaces..?? the word After, should be after..

You may also use a noBreak space after the period at the end of the abbreviation.
If I remember well, in such case the capitalization will not apply.
Yvan KOENIG (VALLAURIS, France) mercredi 27 avril 2011 23:34:46

Dnsmasq stops after random periods of time

I have had dnsmasq running my localhost adblock since over a year and everything was working fine. However, since several weeks, I noticed that it just stops working after random periods of time.
I was unable to identify any error, and it starts just fine if I run it after it quits, but after several hours it quits again. Here's systemctl status dnsmasq output:
Showing one /org/freedesktop/systemd1/unit/dnsmasq_2eservice
Sent message type=method_call sender=n/a destination=org.freedesktop.DBus object=/org/freedesktop/DBus interface=org.freedesktop.DBus member=Hello cookie=1 reply_cookie=0 error=n/a
Got message type=method_return sender=org.freedesktop.DBus destination=:1.255 object=n/a interface=n/a member=n/a cookie=1 reply_cookie=1 error=n/a
Sent message type=method_call sender=n/a destination=org.freedesktop.systemd1 object=/org/freedesktop/systemd1/unit/dnsmasq_2eservice interface=org.freedesktop.DBus.Properties member=GetAll cookie=2 reply_cookie=0 error=n/a
● dnsmasq.service - A lightweight DHCP and caching DNS server
Loaded: loaded (/usr/lib/systemd/system/dnsmasq.service; enabled)
Active: inactive (dead) since Tue 2014-10-28 22:22:02 CET; 10h ago
Docs: man:dnsmasq(8)
Main PID: 2590 (code=exited, status=0/SUCCESS)
Root directory /var/log/journal added.
Considering /var/log/journal/8ed49f4f63fc90478b051d8f00000121.
Directory /var/log/journal/8ed49f4f63fc90478b051d8f00000121 added.
Journal filter: (((OBJECT_SYSTEMD_UNIT=dnsmasq.service AND _UID=0) OR (UNIT=dnsmasq.service AND _PID=1) OR (COREDUMP_UNIT=dnsmasq.service AND _UID=0 AND MESSAGE_ID=fc2e22bc6ee647b6b90729ab34a250b1) OR _SYSTEMD_UNIT=dnsmasq.service) AND _BOOT_ID=c9b052e6ea8d4c27bb30a0aaf25d5874)
Root directory /var/log/journal removed.
Directory /var/log/journal/8ed49f4f63fc90478b051d8f00000121 removed.
mmap cache statistics: 0 hit, 0 miss

Just as an update to the above, the same problem occurs in safe mode?

Problem after testing 100 products

I use Labview to control a test machine. There is an 6251-M series DAQ board for analog signals to be acquired and PCI 6509 for Digital I/Os. I also control an AC motor drive via serial port(Enable, start, stop and speed ref.). The problem is after testing an amount of products(e.g. 100) the cycle time of the test increases(from 10sec to 20-30-50sec). I saw that this caused of misreadings from serial port(because I read the speed via serial port to switch between steps). Why it doesn't happen at first and starts after making an amount of tests. What can I do about this. How can I make sure the readings to be the same everytime? And make the cycle time fixed.

MSARIKOC wrote:
I use Labview to control a test machine. There is an 6251-M series DAQ board for analog signals to be acquired and PCI 6509 for Digital I/Os. I also control an AC motor drive via serial port(Enable, start, stop and speed ref.). The problem is after testing an amount of products(e.g. 100) the cycle time of the test increases(from 10sec to 20-30-50sec). I saw that this caused of misreadings from serial port(because I read the speed via serial port to switch between steps). Why it doesn't happen at first and starts after making an amount of tests. What can I do about this. How can I make sure the readings to be the same everytime? And make the cycle time fixed.
Maybe a memory leak?
Opening ressources (References and not closing them?
Creating a report string or logstring or log-array?
Greetings from Germany!
Uwe

Cluster node fails after testing removing both interconnects in a two node

Hi,
cluster node panics and fails to join cluster after testing removing both interconnects in a two node cluster. cluster is up on one node , but the panic'ed node fails to rejoin cluster saying no sufficient quorum yet and both clinterconn failed (even after conencting the interconn). Quorum device used is a shared disk.
Is this a bug?
Any workaround or solution?
Cluster is 3.2 SPARC
Thanking you
Ushas Symon

Sounds like a networking problem to me. If the failed node genuinely can't communicate with the remaining node then it will not be allowed to join the cluster, hence the quorum message. I would suspect either:
* Misconnected cables
* A switch that has block or disabled the port
* A failed auto-negotiation
This is of course without knowing anything about what your network infrastructure actually is!
Tim
---

Registration of VisualStudio after test period

Similar Messages

Maybe you are looking for